Installation of Oracle EBS ERROR cannot find file Env

Similar Questions

• with winzip Self-extractor corupt.and header error cannot find file c/user /? /AppData...

  Hi, I use windows vista and erase something and I can not install programs of see the internet.it with winzip Self-extractor header corupt.also during the instalation error it can not find file c/user /? / App

  Hello

  1. in the place where you try to download this file?

  2. you are trying to download the zip file?

  3. this happens with all files or any specific file?

  Switch error header corrupt is due to corrupt Self extractors (and corrupted, and .zip files) that were introduced in the file during the download.

  Normally, the download of the new file solves the problem. If, however, repeated attempts to download the file do not result in a good copy, your computer may be infected by a virus

  I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

• Dynadock V10 - "error cannot find Setup file" INSTALLER ERROR

  Hi I have a toshiba dynadock V10.

  Whenever I try to install the drivers, that it says "error cannot find Setup file. I have downloaded the latest drivers and off my anti virus and cut all the proiceses running and no go. There are a few references to this on the internet, but none has a solution.

  I amn trying to install it on an equium U400 running windows 7.

  Curiously, it loaded on an old dell pc easily!

  I spent hours looking on the net and there is no answer. I have nothing showing in the programs to uninstall.

  Thank you

  > Oddly enough it loaded on an old pc easily!
  Hello

  This means that drivers are ok and that there must be something wrong with the system pre-installed on Equium U400.
  How to proceed?

  It is important that you don't would NOT connect the Dynadock to the laptop before installing the software and drivers was not finished.
  Therefore, you need to install the software first. Then after new reboot connect the Dynadock to portable and installation would end the next steps.

• Critical error: cannot find the file [CardGames.dll]. The game cannot continue.

  I recently noticed this error message-

  Critical error: cannot find the file [CardGames.dll]. The game cannot continue.

  whenever I try to click on a card game.  Help, please!  Is there something I can download again to fix this error?

  Hi jaymeister3580,

  It seems that the problem is related to the installation of the game itself, I suggest you try the following steps:

  Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below. The following steps are worth a try:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Check if the problem persists

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Oracle 11 GR 1 material on Windows Xp error cannot find J2SE SDK installed to the path

  When I type in the path to java.exe in SQL dev., I got error ' cannot find J2SE SDK installed to the path: C:\Program Files\Java\jre6. "when I entered the path C:\Program Files\Java\jre6\bin\java. What is the reason for this error? How can I fix it? Installation of the database say it was successful

  Developer SQL must the JDK Java JRE not to operate successfully. Your path looks like a path for the JRE. There is a download of windows that comes with the Java developer kit.

  concerning

  Niall

• I can't open XLS attachments in an email... error = cannot find ' C:\users\---\appdata\local\microsoft\windows\temporary internet files\content. IES

  I can't open XLS attachments in an email... error = cannot find ' C:\users\---\appdata\local\microsoft\windows\temporary internet files\content. IES

  You have Excel installed? If this isn't the case, get this viewer.

  Excel Viewer
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=1CD6ACF9-CE06-4E1C-8DCF-F33F669DBC3A&displaylang=en

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• BlackBerry Smartphones Runtime error "Cannot find system in the file table.

  I need help!

  I have a Blackberry Curve 8310 and have recently installed Version 4.5

  I'm trying to set my synchronization.  I followed the steps to set up my Outlook 2007 calendar.  He told me congratulations! You have configured the product. However, when I press Finish, I get a runtime error "cannot find system in the file table.

  I uninstalled the program and reinstalled - the same error.

  Any help would be appreciated!

  FIGURED IT OUT!

  The following steps, which are displayed on the RIM support will work; However, I had to do it another way.  In step 1, it says that ilxolkCompanion.fil is located in the path C:\Program Research In Motion\BlackBerry\Connectors\MS Outlook Connector... However, when I searched this file, it was actually located in C:\Program Files\Blackberry\Connectors\MS Outlook Connector.  (Maybe it's because I upgraded from 4.2.2 to 4.5 w/o filling a clean uninstall... not too sure why)

  Once I located the file via the command prompt, I have not recorded in accordance with the instructions of step 1.  I then followed step 2 exactly Word for Word... and VOILA!  I have now Version 4.5, working with MS Outlook 2007

  Resolution

  If the connectors folder is always present in C\Program Research In Motion\BlackBerry\Connectors\MS Outlook Connector, follow these steps:

  1. Unregister the old of the Microsoft Outlook ilxolkCompanion.filconnector.
     1. Open the command prompt.
     2. Navigate to C:\Program research in Motion\BlackBerry\Connectors\MS Outlook Connector.
     3. Type command regsvr32 u ilxolkCompanion.fil.
     4. In Desktop Manager, Microsoft Outlook is no longer appears as an available desktop application.
  2. Save the latest Microsoft Outlook Connector.
     1. Navigate to C:\Program research in Motion\BlackBerry\IS71 Connectors\MS Outlook Connector.
     2. Type the command regsvr32 msoutlookconnector.fil.
     3. Office Manager, Microsoft Outlook will be now stored as an available desktop application.

  Once these steps have been completed, configure synchronization again.

• Stand-alone application with LabView 7.0 get error cannot find DAQmx clear task.vi

  I tried to create a stand alone vi with the Build Application or shared Library (dll) in LabVeiw 7.0

  When I put it on another PC to test it I get the error "cannot find DAQmx clear task.vi.

  the other PC also has 7.0 and 8.1 DAQmx Labview.

  I think my problem is in the source tab, where you are supposed to add dynamic vi and support, I have search the forums and database of nor and have not found a solution.

  Hi LabTech09,

  When you run the executable file on the other computer, that's when you get this error?  You have the same exact versions of DAQmx and LabVIEW on both computers?  Is the dialog box allow you to navigate to the clear task.vi DAQmx?  If so, you can find these screws in C:\Program NIUninstaller Instruments\LabVIEW 7.0\vi.lib\DAQmx\configure\task.llb.  The executable runs on the development computer (the machine, it was compiled on)?

• Need error cannot find /usr/lib/webplatforms/plugins/jnext/customPlugin.so library cannot be found

  Hi all

  I have created a native extension in the BB SDK 10.2 to connect to data services and request a server using the CellualarDataInterface API.

  It was packed, but when I run it in Simulator or device, it shows error:

  Need error cannot find /usr/lib/webplatforms/plugins/jnext/customPlugin.so library cannot be found

   

  I read that it is the link error but not able to identify the problem.

  Here's the URL where my BB 10 code example is hosted:

  http://www.filedropper.com/SampleApp (Go to this link and click Download this file)

  Please help me find the solution. It is very urgent.

  Finally, I solved this error by adding the network of Qt library.

• Airpackager error ' cannot find node: versionNumber.

  I try to use airpackager to create a .bar for a Tablet created in CS5 application, and the apppackager generates the following error message: "error: cannot find node: versionNumber.

  I have installed the extension CS5 for Air2.5, that you have set the ActionScript settings and Air according to the instructions in #2 Webcast to publish the file to the tablet. I also checked that the path: on my device includes the paths to the directories SDK Tablet and SDK\bin.

  OK, so I found a solution to this error.  It seems that the generated CS5 - app.xml does not produce content app.xml in the same order as airpackager is looking for.  Instead, I used the content of the .xml file sample posted in demos Tablet-OS and update for my application, and it worked.

  FYI: the sample - app.xml format I used was:

  
  http://ns.Adobe.com/air/application/2.5">
          NET.example.test
          test
          test
          1.0.0
           Example Inc.
         
                  test.swf
         
  

• Installation of Oracle EBS R12 on Linux x 86

  Hello
  
  I want to start the installation of Oracle EBS R12 on Oracle enterprise Linux (version 5.6), downloaded s/w. Like this the 1st time can someone help me how to create staging in detail and how to check checks for OS pre-installation as kernel parameters and packages etc.
  
  Expected answer.

  I have to add the rest of 12 parameters in the sysctl.conf file?

  Yes.

  Thank you
  Hussein

• TestStand Java - 1500 error cannot find the class

  Hello world

  I use Java 1.7 and TestStand 2010.

  I try to add a java class in the computer example folder and call the method.

  The java class is just as below, because I'm just trying to call my own java class.

  I put the class path to start the JAVA virtual machine in the directory where the example of the computer (which is also the directory where I put my java class).

  TestStand can call methods of the computer, but not mine (received the error 1500 error cannot find class). I put my my java method call among calls for default computer example.

  Also I read similar topics, but again I can not resolve the error.

  Where is the part that I'm bored, in fact? Please share some ideas.

  Note: I even try to leave the empty class path, but TestStand can always call the methods of the computer. Why?

  ----------------------

  public class TestJava {}

  Public Shared Sub main (String [] args) {}

  }

  public String returnString(boolean a) {}
  Return "success";
  }

  }

  To load a class which is within a package, you can use the package rating (or change the example in order to to use). The path to the class is passed directly to the JAVA virtual machine to load the class, but really what is necessary is the package from the class path, including the full path to the class.

  This means you need to do the following:

  1 set the class path in the base directory where you created all your classes, if you have the following structure:

  • MyFile.java
  • builds
  • • MyPackage
    • • MyFile.class

  You must set the classpath in the builds directory

  2 when you set up your steps, you must set the path to the class in your steps from Java to MyPackage/MyFile.class (note the separator is a forward slash, not used Windows backslash, then the Browse button is not quite help with that).

  Another important thing is that when you set the classpath variable you remove the normal Java class path, if you are using Java classes from the library by default, you may have to add \lib\rt.jar

• config file error could not open the file line column 0 0 onfig file error cannot open file row 0 column 0 - whenever I try to open my hp game console

  original title: config file error could not open the file column line 0 0

  onfig file error cannot open file row 0 column 0 - whenever I try to open my hp game console... I get this error message...

  Hello

  Was the HP works well before game console? If Yes, then do you remember any hardware/software changes, after which the problem started?

  Method 1: I would say you put the computer to boot and then check if the problem is caused by any third-party application.

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: I would say as you uninstall and reinstall the HP game console and check to see if it helps:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  You can also try posting your question in the HP Support forums.

  HP Support Forums - operating systems and software

  http://h30434.www3.HP.com/T5/desktop-operating-systems-and/BD-p/OSandSW

• Problem with the library: need error cannot find /usr/lib/webplatform/plugins/jnext/libpushjnext.so

  Hello

  I have the application developed by WebWorks 2.0. After a year, I need to get the new version of my app, but when I install and run my application on the device, the application displays an error message:

  Need error cannot find /usr/lib/webplatform/plugins/jnext/libpushjnext.so

  I don't understand why I have this error, because the original version of my application works very well.

  I read a lot of posts on the forum but none of the posts helped me.

  The post office

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/require-error-can-t-find-usr-lib...

  and the post

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/deploy-WebWorks-app-into-device/... says I have to add the library. But I use only the push notification and push notification does need that com.blackberry.push and com.blackberry.invoked.

  Does anyone have any experience with the problem? Or does anyone have any ideas how to fix?

  onesto

  Hello chadtatro,

  Thanks for your tip.

  My problem was that I did not define cordova directory in the environment variable windows. When I added the cordova directory to the path in environment variables, my problem has been resolved.

  It is necessary to have a set of cordova in the command line in the case that your application uses a library of cordova.

  There are link setting cordova:

  https://Cordova.Apache.org/docs/en/5.0.0/guide/CLI/index.html#Add-plugin-features

• "Cannot find file" dialog box

  I get a dialog box after you start Win7 32-bit which indicates just that "cannot find file."

  He is obviously trying to load something but I have no idea what...

  Any ideas where it might come from?

  Is there a utility somewhere that shows this boot file is loaded?

  Thank you :-)

  This will do what you're after.

  Autoruns from Sysinternals

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.