Installation of patches on R12.2.0 Oracle Home (10.1.2)
Hello:
I'm being upgraded from R12.2.0 to R12.2.3 as an accessory I do a request ID Note: Oracle E-Business Suite Release 12.2: consolidated list of patches and bugfixes of technology (Doc ID 1594274.1), by this Note ID article 3.1 fixes apply to forms and reports for 10.1.2.3 ORACLE_HOME.
According to the instructions of the Note that I downloaded the patches for the version 32-bit and ready to install the patches before installing the patches I have couple of question.
1. should I install the patches using 32 or 64 bit opatch utility?
2. should I install the patches on both "fs1" & 'fs2' file system?
Please answer these questions to continue the upgrade process.
Thanks in advance.
Syed,
Syed,
1. use opatch less 10.1.2.3 $ORACLE_HOME to apply these patches - see MOS Doc below for more details
2 enforce FS - Oracle E - Business Suite 12.2 patch components Technology Guide (Doc ID 1355068.1)
Thank you
Hussein
Tags: Oracle Applications
Similar Questions
-
The upgrade of the R12 Apps Tech Oracle Homes
Hi DBAs,
I have an instance of R12 (12.0.4 one node) out of the box on RHEL 5.3 installation (64-bit). I have improved the Oracle DB to 10.2.0.4. I want to upgrade the Applications "tech_st" Oracle Homes - 10.1.2 layer (forms and reports) and 10.1.3 (Apache & OC4J).
Please let me know any documentation to follow and also what is the best approach recommended to complete this step.
Thank you
-Samar-Samar,
Please refer to the following documents.
Note: 728531.1 - upgrading to OracleAS 10 g 10.1.3.3 Patch Set in Oracle E-Business Suite Release 12
https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=728531.1Note: 454811.1 - upgrade to the latest OracleAS 10 g 10.1.3.x Patch set in Oracle E-Business Suite Release 12
https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=454811.1Note: 437878.1 - upgrade OracleAS g 10 forms and States Oracle E-Business Suite Release 12
https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=437878.1Kind regards
Hussein -
NOTE: from 'build base Middleware of Oracle 11 g Architecture. "
Review of the videos for "How to install Oracle 11g Rel 1 portal Middleware and discoverer?"
Part 4 patch the Oracle home (04:57)
https://support.Oracle.com/CSP/main/article?cmd=show & type = ATT & ID = 1118681.1:PD11G_INSTALL_PT4 & inline = 1The verbal and demo explanation does not use the original location/Oracle HOme of the previously
installed for the binary PFRD base. It probably should.In addition, for some steps to follow to patch binaries PFRD, I'd put it:
Step 4. I am guessing that the patch will establish an another sub dir Disk1 and don't want to overwright
installation of the initial PFRD, therefore, moves the Group of hotfixes as follows.CD/opt/web/install/PortalUpgradeAdvisor/pfrd
960 ls - ltr
Group of hotfixes mkdir 961
Group patches 962 mv p11060983_111140_LINUX.zip
Group patches 963 cd.
Unzip 964 *.RE: of course, having unpacked the group created patches another subdirectory Disk1 with his own runInstaller
VNC gui:I guess, all we are doing is patching of binary files, nothing should be running.
Maybe an environment set in same, as when we ran last the PFRD install, however. There we / I had
run. / set_mid_clean after making sure the files property was oracle: oracle.Yes, VNC gui and
/ opt/Web/Install/PortalUpgradeAdvisor/pfrd/Patchset/disk1
. / runInstallerHere again, we select Install Software - is not configured
RE: Get the message again on this screen "installs the software only. After said is finished, use
config.sh at ORACLE bin directory to configure the working bodies of these components installed.Specify the installation location. Always to
Oracle Middleware homepage: / opt/oracle/Middleware
and
An Oracle home directory: as_2 # I bet it must be as_1 because that is where the initial PFRD install binary files has occurred.NOTE: The summary of the Installation in the video screen escape the Oracle Home is the previous specified during the initial installation. That is to say. PFRD_Binaries. I guess I should have named that instead of taking the default as_1. At least I would have to have done that. Well. Maybe this story might help the next guy.
Also
NOTE: The Installation screen is not "from" group of patches as in the video where it says
Install Oracle Portal, forms, reports, and discover the Group of hotfixes.
Hi Charlie
I'm a little confused by this feedback. Especially when you say that you see the option "install - do not configure. Should this option is visible only when you run the Basic 11.1.1.2 PFRD the software installer. The Group of hotfixes 11.1.1.4 has his own 'runInstaller'... and this will display what you see in the viewlet. You definitely run the installer from the directory of stage in the Group of hotfixes? (I'll do my own validation test - if I find something strange going on... I'll report.)I now take the following action
1. I will put the Viewlet so it is clear that the Group of hotfixes is staged in a different place from the base 11.1.1.2 media
2. provide that nothing must be running (because at this point, no instance of 11 g of construction has been configured)
3. There's a "slippage" that illustrates the Middleware and Oracle Home entries in the screen "Location of Installation to specify" IEMiddleware homepage: / u01/alca_portal/middleware
Oracle home: PFRD_BinariesHowever, you will see that this slide for 2 seconds (which is an error) and if you miss it probably.
Just FYI - the House of Oracle 11 g correction is in general the same procedure as patching a mid-layer House AS10g i.e
-You set the Oracle Home base using the installation of the basic software program
-You patch the Oracle home using the installation program of the Group of hotfixes -
R12.1.1 EBS installation and upgrade to R12.1.3
Dear Experts,
I'm already installed Oracle E-business R12.1.1 (new installation without patch update after installation is complete).
However, now I will install a new VM on Oracle Linux 5.4 then level to R12.1.3.
I'm looking in and read too many articles in the Oracle support on how to install 12.1.1 and upgrade to R12.1.3, I found too many documents and patches.
My question, is there any document makes instruct me to install requisit-pre and post requisit for installation and the upgrade?
and also, mention the fix required for displays and upgrade?
Your support is highly appreciated.
Ahmad,
Ahmad,
The patch in (Doc ID 1066312.1) is already included in 12.1.3, so you should only follow (Doc ID 1080973.1)
Thank you
Hussein
-
Patch 20133080:R12. PO. Compatible with 12.1.3 D
Hi, we encounter the Bug 20133080, which cancels the PR line if the PO line is cancelled.
Our EBS is 12.1.3, but it patch 20133080 : R12. PO. D stated that he belonged to the 12.2.3.
However, while they inspected the patch details (https://updates.oracle.com/Orion/Services/download?type=readme & 18420063 = aru) README file:
For 12.0.X / 12.1.X / patches of pre-upgrade (with adpatch), you must stop all services in the Application tier before performing the tasks in this section.
so this means that it is also compatible with 12.1.3? It's the kind of confusion.
If it's not compatible, is there a patch for 12.1.3?
If it isn't there a patch for 12.1.3, where I apply a patch?
I connected an SR to MOSC asks the same questions, but they did not really give me a definitive answer.
Thank you!
Hi all!
Oracle has managed to create a patch for 12.1.3. (20133080:R12 number of patch. PO. B).
I hope this helps!
-
Patch in R12.2.0 procedures
Dear all,
I'm new to the R12.2.0, please guide me patch procedures and how to apply the patch in R12.2.0 because there are different phases in R12.2.0 while the multiple patch how do I start and finish sessions of patch.
Please guide me.
Concerning
Kumar
Please see:
ADOPTION
Online marking
http://www.Oracle.com/pls/ebs122/search?word=online+patching&format=ranked&remark=quick_search
Thank you
Hussein
-
Hello
Try to install R12.2 a diagram of 4 nodes (servers, 2 database - RAC - oracle_home shared, 2 application - appl_top shared servers).
OS on all servers: Oracle Linux 6.5, kernel 2.6.39 - 400.212.1.el6uek.x86_64 on all nodes.
The database installation went well. Further installation on the 1st application node. Configuration loaded successfully from the database, checking the system started but rapidwiz freezes with ' Exception in thread "Thread-64" java.lang.NullPointerException ".
[oracle@erpappldev01 ~] $ vncserver
New office of "erpappldev01.gunet.gr:1" (oracle) is erpappldev01.gunet.gr:1
Startup applications specified in /home/oracle/.vnc/xstartup
Log file is /home/oracle/.vnc/erpappldev01.gunet.gr:1.log
[oracle@erpappldev01 ~] $ export DISPLAY =: 1
[oracle@erpappldev01 ~] $ /inst/inst/r12.2.2/startCD/Disk1/rapidwiz/rapidwiz
Installation Wizard fast is to validate your file system...
CMDDIR=/inst/inst/R12.2.2/startCD/Disk1/rapidwiz
Quick Installation Wizard will now launch the Java Interface...
[oracle@erpappldev01 ~] $
Exception in thread "Thread-64" java.lang.NullPointerException
at oracle.apps.ad.rapidwiz.util.CheckerClass.checkMountSpace(CheckerClass.java:2322)
at oracle.apps.ad.rapidwiz.util.CheckerClass.checkFileSpace(CheckerClass.java:1844)
at oracle.apps.ad.rapidwiz.util.CheckerClass.doPreChecks(CheckerClass.java:310)
at oracle.apps.ad.rapidwiz.util.CheckRunner.run(CheckRunner.java:91)
at java.lang.Thread.run (unknown Source)
I have all the necessary packages installed on OEL and followed instructions of the following documents:
Oracle eBusiness Suite Installation and upgrade of exit 12 (12.2) Notes for Linux x 86-64 (Doc ID 1330701.1()
Controls and problems installation EBS R12.2 on RAC Cluster using a fast installation (Doc ID 1595139.1()
using Oracle 11 g Release 2 Real Application Clusters and automatic management of the storage with Oracle E-Business Suite version 12.2 (Doc ID 1453213.1()
Share Application-level file system in Oracle E-Business Suite version 12.2 (Doc ID 1375769.1()
I look for metalink and community "Thread-64" but no relative results found!
Can someone please help?
Thank you
Babis
Problem is solved as part of the SR.
Thank you all for your help
Solution in the doc 1624652.1 knowledge base
Kind regards
Babis
-
forms cannot be opened after patched QSP R12
Hi all
Please help on below question.
forms cannot be opened after patched QSP R12.
all services are up and runnin.
E - biz: 12.0.6
DB: 11.2.0.2
Thanks in advance.
Concerning
KumarHi Kumar,
Caused by: oracle.classloader.util.AnnotatedClassNotFoundException
Please compile JSP files manually according to the guidelines of these documents and then check.
Blank Page Accessing R12 - ' lack of class: _RF' in OACore application.log [467562.1 ID]
R12 - logon does not work, no error message is displayed [435550.1 ID]
Oracle Application Server diagnostic tools and logs in Applications Release 12 [454178.1 ID] - compiled JSP files are deleted or corruptedThank you
Hussein -
EM. Oracle.Home not set in installation simple soa
Hello
I have a script for silent installation that installs and configures a basic installation of 12 c SOA. I founded some of the scripts on an example of middlewaresnippets.com.
In short, the scripts are;
- Install Oracle DB SE2
- Install Oracle JDK 8u60
- Install the Infrastructure FMW 12.1.3.0.0 (include PS5)
- Install the BPM (including SOA)
- Run the RCU
- Creates areas etc.
When you are finished, the nodemanager, adminserver, and soa server can be started. There are only a few error messages in the AdminServer.out that are bugging me.
[code]
< 13 November 2015 14:41:23 THIS > < WARNING > < oracle.as.jmx.framework.wls.spi.ComponentMBeans > < J2EE JMX-46714 > < error analysis of the MBean descriptor file "fmwconfig/mbeans/em_mbeans.xml".
java.io.FileNotFoundException: jar the MBean Config file ' / u01/data/domains/soa12c/config/fmwconfig/mbeans/${em.oracle.home}/jlib/em-core-ccw-pojo.jar ' does not exist.
at oracle.as.jmx.framework.generic.spi.BaseJMXFrameworkProviderImpl.getMBeanLoader(BaseJMXFrameworkProviderImpl.java:594)
at oracle.as.jmx.framework.generic.spi.BaseJMXFrameworkProviderImpl.getConfigObjectMBeanAssociationInfo(BaseJMXFrameworkProviderImpl.java:352)
at oracle.as.jmx.framework.generic.spi.BaseJMXFrameworkProviderImpl.getConfigObjectMBeanAssociationInfo(BaseJMXFrameworkProviderImpl.java:277)
< 13 November 2015 14:41:39 THIS > < error > < oracle.adf.share.config.ADFMDSConfig > < BEA-000000 > < MDS Configuration Exception encountered in parse ADF ConfigurationMDS-01330: cannot load the MDS configuration document
MDS-01329: cannot load the item "persistence-config".
MDS-01370: MetadataStore for metadata-store-use "writable" Configuration is not valid.
[/ code]
Most of the other errors seems to be associated with em, specifically the em.oracle.home. When to check the AdminServer.out at the start of the AdminServer environment variable seems also not to be defined.
The installer is basically;
- read the weblogic (wls.jar) model, set some basic as etc domain name options and write the field.
- read the field and add the model bpm (oracle.bpm_template_12.1.3.jar)
- Set up the domain
- setOption ('AppDir', domain_app_home);
- create a machine
- create a cluster of soa and add the soa server to the cluster
When validating deployments in the WLC the em.ear aims the AdminServer, but is failing. Targets of the MA has an em, the default (webapp) component and the empty.jar.
If necessary I can post scripts
See you soon,.
Peter
For the benefit of third parties, the problem has caused a bad addition to the EXTRA_JAVA_PROPERTIES.
A setUserOverrides.sh in the
"/ bin" that contains the following statements. [code]
EXTRA_JAVA_PROPERTIES = ""-Djava .net .preferIPv4Stack = true ' "
export EXTRA_JAVA_PROPERTIES
[/ code]
The setUseOverrides.sh is run after the setSOADomainEnv.sh and therefore replaces the settings.
By adding the new EXTRA_JAVA_PROPERTIES it is all ok works again... phew :-)
[code]
EXTRA_JAVA_PROPERTIES = "-Djava .net .preferIPv4Stack = true, ${EXTRA_JAVA_PROPERTIES}" "
export EXTRA_JAVA_PROPERTIES
[/ code]
-
While patch should RAC I take backup of Oracle Home on all nodes?
While patch should RAC I take backup of Oracle Home on all nodes? for 11 GR 2, BECAUSE I think that take bkp for each node that each House has its own file RSC, your thoughts?
Hello
Although the automatic steps, it is good practice to make a backup of the current ORACLE_HOME being patched (manual).
Kind regards.
-
Script the installation of patches
Hi guys,.
I need to update a bunch of ESXi5.5 self-contained bed and breakfast, about 160 remote locations.
The hosts are autonomous, vMotion, etc. are not available options
I'm trying to create a script to perform the following operations
- Stadium updates ESXi55 of VUM
- Power off all VM running on each host (I found how to do this by calling a list of virtual machines to a .csv and on each virtual machine using the command Stop-VM)
- Put the host in Maintenance Mode
- install the patches / updates
- Reboot the host after installation of patches/updates
- Powering the same VM who were earlier closure (again, found this by using the Start-VM command in step 2 above)
- Run a report on the Patching for audits of compliance (following a discussion by LucD for this)
Someone has already tried this PowerCLI or should I stick with the GUI?
Any help on any piece above would be great.
Thank you
Seems good, just some minor modifications.
$vc = Read-Host "enter the name of the vCenter used to manage ESXi hosts.
SE connect-VIServer $vc
Game-PowerCLIConfiguration - ignore InvalidCertificateAction - confirm: $False
$hosts = get-VMHost (Get-Content C:\Temp\ListOfHosts.txt)
$BL_Name = Read-Host "Please enter the name of the baseline scan, for example primary ESX patches 2nd quarter of 2015.
$baseline = get-Baseline | Where-Object {$_.} {Name: corresponds to "$($BL_Name)"}
{foreach ($item in $hosts)
$compliancestatus = get-compliance-entity $item - unknown ComplianceStatus
If {($compliancestatus)
Inventory-scan-entity $item - RunAsync
}
Stage-Patch-entity $item - Baseline $baseline - RunAsync-confirm: $false
}
What exactly hand you mean with "..." not as clean as I would like to"?"
-
Hi all
DB: 11.2.0.3.0
EBS:12.1.3
Operating systems: Solaris SPARC 64-bit
I get the following error message on the command below:
opatch $ apply - invPtrLoc $ORACLE_HOME/oraInst.loc
Setup Oracle interim Patch version 1.0.0.0.64
Copyright (c) 2011 Oracle Corporation. All rights reserved...Oracle recommends using the latest version of OPatch
and read the OPatch documentation in the docs/OPatch
Directory for its use. For more information on the last OPatch and
other support issues, please refer to document ID 293369.1
available on My Oracle Support (https://myoraclesupport.oracle.com)Oracle home: /d001/test1/apps/tech_st/10.1.2
The Oracle Home Inventory: /d001/test1/apps/tech_st/10.1.2/inventory
Inventory Center: / export/home/applmgr/oraInventory
from: /var/opt/oracle/oraInst.loc
YES location: /d001/test1/apps/tech_st/10.1.2/oui
YES shared library: /d001/test1/apps/tech_st/10.1.2/oui/lib/solaris/liboraInstaller.so
Location of Java: /d001/test1/apps/tech_st/10.1.2/jdk/jre/bin/java
Location of the log file: /d001/test1/apps/tech_st/10.1.2/.patch_storage/ < patch ID > / *.logThe patch directory field must be a number.
ERROR: OPatch failed due to problems in the area of patch.
$ opatch version
Setup Oracle interim Patch version 1.0.0.0.64
Copyright (c) 2011 Oracle Corporation. All rights reserved...Oracle recommends using the latest version of OPatch
and read the OPatch documentation in the docs/OPatch
Directory for its use. For more information on the last OPatch and
other support issues, please refer to document ID 293369.1
available on My Oracle Support (https://myoraclesupport.oracle.com)OPatch Version: 1.0.0.0.64
Tried the underside of the notes but the error persists. Even tried several times 'p6880880_101000_SOLARIS64.zip' to download and unzip on the server, but of no use. This question took place now for a few days.
(Error: OPatch failed due to problems in the area of the Patch [ID 1281504.1]).
Opatch error: The Patch Directory area must be a number [258650.1 ID]
O patch 1.0 . 0.0.55 fails with the error 'the Patch directory field must be a number' [ID 394601.1]
Patch Directory area must be a number: Opatch returns with the Code error = 170 [369555.1 ID]
Please let me know any other suggestion is appreciated as the runinstaller from Patch 5983622 -Upgrade to Forms 10 g OracleAS and statement 10.1.2.3 (437878,1) fails after running root.sh Run specific tasks.
I'm upgrading to 10.1.2.3.0 forms using - reclassification OracleAS g 10 forms and States to 10.1.2.3 (437878.1)
Thank you for your time
Kind regards
Hi user10088255,
Please follow the procedure under the section 'How to check the contents of the inventory Central' (Doc ID 742477.1) to check whether or not 10.1.2 ORACLE_HOME is registered in the central inventory. If it is not registered then follow one of the methods in the same doc to add.
Thank you
Hussein
-
Hello Sir,
According to the readme for Patch 9179588 , I'm trying to merge the patch (9179588:R12. AD. (B) with 9477107:R12. AD. B and R12. AD. B.1
()7461070 fix). When I run admrgpch without the option - admode, admrgpch succeeds.
However, when I just add option - admode in the same command, get the error this invalid "-s" option To please see below the details and suggest as there Note: this merger should be a full merger with - admode.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++drix10: / fmstop/patches/R1211AD/fusion > ls - lrt
13992 total
-rw - r - r - 1 appltest s/n 7035668 03 August at 10:59 p7461070_R12_AIX64 - 5L .zip
-rw - r - r - 1 appltest 79016 04 August at 03:48 p9179588_R12 dba. AD. B_R12_GENERIC.zip
-rw - r - r - 1 appltest 38579 04 August to 05:22 p9477107_R12 dba. AD. B_R12_GENERIC.zip
-rw - r - r - 1 appltest s/n 94 04 August 13:27 manifest.txt
drix10: / fmstop/patches/R1211AD/fusion > cat manifest.txt
p7461070_R12_AIX64 - 5L .zip
p9179588_R12. AD. B_R12_GENERIC.zip
p9477107_R12. AD. B_R12_GENERIC.zip
drix10: / fmstop/patches/R1211AD/fusion >
drix10: / fmstop/patches/R1211AD/fusion > admrgpch - admode s/fmstop/patches/R1211AD/merge/fmstop/patches/R1211AD/merge-merge_name d merged_R12AD11-manifest manifest.txt
Error: Invalid Option: s
use: admrgpch-help
admrgpch < repertoire_source > < repertoire_destination >
admrgpch s < repertoire_source > < repertoire_destination > d
[-> level < detailed] [- merge_name < model >]
[- manifest < Filename >] [- logfile < Filename >]
where
* - help Print message.
* - < level > detailed can be: {0 (SILENT),
1 (quiet), 2 (VERBOSE) or 3 (LOUD)}
Default is-1 (QUIET).
* - merge_name < model > the name of the merged patch (up to 24 characters).
Default - "merged".
* - s < repertoire_source > path of the source directory where all the patches to be
merged have been decompressed.
* d < repertoire_destination > path of the destination directory where the merger
patch will be created.
* - manifest < Filename > full path of a file that contains the list of
patch to merge zip files.
the name of the logfile - logfile < Filename > Admrgpch.
Default: "" < CWD > / admrgpch.log "."
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++Without the option - admode:
drix10: / fmstop/patches/R1211AD/fusion > admrgpch s/fmstop/patches/R1211AD/merge/fmstop/patches/R1211AD/merge-merge_name d merged_R12AD11-manifest manifest.txt
decompression p7461070_R12_AIX64 - 5L .zip...
p9179588_R12 decompression. AD. B_R12_GENERIC.zip...
p9477107_R12 decompression. AD. B_R12_GENERIC.zip...
Execution of the merger of pilots patch
-Corrective treatment: / fmstop/patches/R1211AD/merge/7461070
-Treatment did patch: / fmstop/patches/R1211AD/merge/7461070
-Corrective treatment: / fmstop/patches/R1211AD/merge/9179588
-Treatment did patch: / fmstop/patches/R1211AD/merge/9179588
-Corrective treatment: / fmstop/patches/R1211AD/merge/9477107
-Treatment did patch: / fmstop/patches/R1211AD/merge/9477107
Copying files...
all 5%. Files copied from 44 876...
all the 10%. Files copied from 88 of 876...
all the 15%. Files copied from 132 of 876...
all the 20%. Files copied from 176 of 876...
all the 25%. Files copied from 219 876...
all the 30%. Files copied from 876 263...
all 35%. Files copied from 876 307...
all 40%. Copied the files of 876 351...
all 45%. Files copied from 395 876...
all 50%. Files copied from 438 of 876...
all 55%. Files copied from 876 482...
all 60%. Files copied from 876 526...
all the 65%. Files copied from 876 570...
all 70%. Copied 614 876 records...
all the 75%. Copied 657 876 files...
80% finished. Copied 701 876 files...
85% full. Files copied from 876 745...
90% full. Copied 789 876 files...
95% full. Files copied from 833 876...
100% full. Copying files from 876 876...
Character file conversion set...
3 unified drivers merged.
Patch merger completed successfully
Please check the log file in. / admrgpch.log.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
I will carry out admrgpch after that supply 11i environment and the version of admrgpch is:
drix10:/fmstop/fmstest/fmstestappl/ad/11.5.0/bin > adident Header admerge.pl
admerge.pl:
$Header admerge.pl 115.22 nissubra noship 18/09/2008-12:12:08 $
You must use the binary of R12 to perform the merge, not files binary 11i
Srini
-
Command to get the O-patch installed in 10gR 3 oracle lite
Hello
I use oracle 10 g 3 mobile server.i need to know what is O-PATCH installed in it. can anyone tell me the command to check the O-PATCH installed?
Thanks in advanceGive it a try and let me know if it works (not sure cant try it now)
lsinventory opatch
or
opatch lsinventory-detailsfrequently asked questions
-------
OPATCH FAQ
Copyright (c) 2007 Oracle CorporationGeneral issues:
R1M what are some of the new features in OPatch?
First of all, you can turn on debugging of "setenv OPATCH_DEBUG TRUE"
UNIX, C-shell) or 'set OPATCH_DEBUG = TRUE' (Windows). This will
print debugging messages more. Do not turn this RAC system.(a) ' opatch interview - all "will allow you to query detailed information
on a fix.(b) - jre and the jdk - options allow you to use java executable specified and
pot instead of those of the Oracle home.' (c) ' opatch lsinventory ' will list all patches with the applied date
in chronological order.' (d) ' opatch lsinventory-detail "will list all patches and files
have been modified while ' opatch-all lsinventory - detail ' will display
all Oracle homes with their temporary patches.'Opatch inventory' log files are saved in ORACLE_HOME/.patch_storage
To apply/back log files are saved in
ORACLE_HOME/.patch_storage/"Here's the output of ' lsinventory-all - detail"
LOCATION OF ORACLE_HOME
----------- --------
/ Private/phi_local/OraHome1 home.1
There is no interim Patch
House2/private/phi_local/OraHome2
There is no interim Patch
Home3/private/phi_local/OraHome6Installed the Patch list:
=====================
1) patch 20 applied on Mon Aug 11 15:53:51 PDT 2003
[Bug (s) base: 21]
2) 80 patch applied on Fri Aug 01 16:15:52 PDT 2003
[Bug (s) base: 80-81]Here is the output of ' lsinventory-detail ":"
Installed the Patch list:
=====================
(1) 1 patch applied on Wed Jul 23 12:50:33 PDT 2003
[Bug (s) base: 1]
/Private/phi_local/OraHome2/lib/NewClass.class--> OH / lib
/Private/phi_local/OraHome2/lib/xsu111.jar--> OH / lib
oracle/xml/sql/Foo.class-->
/Private/phi_local/OraHome2/lib/xsu12.jar
oracle/xml/sql/XSUMesg.class-->
/Private/phi_local/OraHome2/lib/xsu12.jar
oracle/xml/sql/Foo.class--> /private/phi_local/OraHome2/lib/xxx.jarIt shows that:
1 patch has been applied on July 23, 2003 at 12:50
NewClass.class has been copied to OH / lib
xsu111.jar has been copied to OH / lib
Foo.Class has been updated to xsu12.jar
XSUMesg.class has been updated to xsu12.jar
Foo.Class was also updated to xxx.jar -
Hello
I need to apply a patch. The patch says that it is compatible with (R12. BY. B, R12.HR_PF. B, 12.1.0, 12.1.1).
I'm on 12.1.1. and my current patch_level is R12. BY. B.1
I'm looking for on what (PF) I'm on. In 11i we is to use decode function by corresponding patch number.
Concerning
TaherHello
These are the patches you need to ask:
Patch 7446767 - R12.HR_PF. B.Delta.1
Patch 8337373 - R12.HR_PF. B.Delta.2Or, run patchsets.sh as suggested before.
Kind regards
Hussein
Maybe you are looking for
-
How to use the recovery on Satellite A215-S7422 DVDs
Hello I have A215-S7422First of all, I like the Vista Home Premium, until I had a few problems with my operating system. I'm downgrading my laptop for Windows XP SP2 home edition.I formatted all the HARD drive, to make a few partitions.A few weeks la
-
New on netbook with windows 7.
A new microcomputer Netbook (a first) nb 505 with windows 7 starter. "" Never put one in place before and struggling to figure out what I did to change all the labels on my toolbar to. "i tunes" logo. Trying to download music from ipod to the compu
-
Drivers for Windows 7. HP Pavilion g6 - 2337sr
People, please, I can't find drivers for my laptop HP Pavilion g6 - 2337sr for Windows 7. What drivers will be OK for her? I mean, what types or names, how can I find them? If anyone knows
-
I want aero to work but also to set up a game for my kids fisher price system but I need to change the resolution in order to make it work and trying to drag the slider, he's not moving that I also need to change to 32 bit which I'll beable when I ch
-
Hi all "" I use ripple to package and sign my application, but it shows the error "[ERROR] error: Please enter a valid application version. I search the Web but I don't get any resolution. anyone here help me out? Thank you