Installation of printer using Windows 8
How can I install a portable printer HP Officejet 4500 using Windows 8?
Friday, January 3, 2014, 21:29:24 + 0000, Joseph Lawrence wrote:
How can I install a portable printer HP Officejet 4500 using Windows 8?
You must download and install the driver of Windows 8 for him of the
HP web site. If you did that?
Tags: Windows
Similar Questions
-
experienced problems for a HP Deskjet 1000 c printer to print using windows 7 64 bit
One known problems get a HP Deskjet 1000 c to print using windows 7 64 bit. I have updated the drivers for parallel port and a printer. the computer recognizes the printer is there, but no documents will print.
HP provides the drivers or software for this printer.
It uses the built-in drivers obtained through windows update
If your PC does not have a PARALLEL port and you use a converter, this method is often problomatic
If your PC has a parallel port, then the motherboard must be of an age that is probably not entirely compatible, not with orders other bottlenecks card mother win7
-
HP deskjet 1000 do not print using windows 7 How to the printer driver
My hp deskjet 1000 printer do not print using windows 7 How to the printer driver
It worked before on this PC?
Full features drivers are here, select the bit version correct victory
-
How can I print a directory on my printer using Windows?
I know how to print entries in the directory using the old commands MS-DOS, but nobody doesn't know I know how to do this using Windows? Is there a direct way or simple to do this in Windows? Or do I have to make a few changes to programming or register, etc.. ? At the present time, I have 3 computers: using XP-64, and two use Vista Home edition. My new computer will be upgraded to Windows 7.
I like to keep my lists of repertoire in a notebook of paper for reference purposes, etc. I'm a dinosaur?
See if this article helps you:
Ja.
--
HAL Hostetler, TCE
Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
www.kvoa.com - KVOA television, Tucson, AZ.
Live Hot Licks - www.badnewsbluesband.com
-
How can I connect to a remote scanner (Hp Laserjet 2940 printer on network) using Windows 7 Fax/Scanner. It says scanner is not connected, but I am able to print remotely.
You can print on most printers remotely, but this isn't the same for scanners
-
Cannot print using Windows 7 using HP Deskjet 842C series
I cannot print from windows 7 using HP Deskjet 842 C series. Windows and HP said is compatible, it can only print from other applications and not Windows 7. Any suggestions?
I cannot print from windows 7 using HP Deskjet 842 C series. Windows and HP said is compatible, it can only print from other applications and not Windows 7. Any suggestions?
In fact - what HP means without out and say what they deem a legacy device (printer) and even if they included a universal driver (Microsoft put in Windows 7) and it should work without doing you anything else - it is perhaps not fully functional as it was in previous operating systems where they (HP) it supported.
HP in this case is the manufacturer of the equipment and in all related case material - the hardware manufacturer is responsible for the materiel support (drivers, software, etc.)
You can follow the advice of HP, if you want to:
But really what they're trying to say is, "your printer is old - buy a new one from us so that we can stay in business."
-
My printer suddenly stopped printing with the message that my printer port configuration is incorrect. I tried to get the information online, but nothing has worked. I have no driver for reinstall the Dell 720 printer. I know its an old printer, but last year when I got this Dell, I got a response from you guys who have worked. I was able to print using my old printer with Windows 7 so far. Help, please. I don't really understand tecky language so please be gentle! Thank you very much!
There is the answer to your question is here...
-
Communication takes place properly between the printer and the computer.
Paper advance but not printing on the page.
Printer copies fine.
Pilots are underway.
Help, please!
Hi GraceWolf,
You did it of any material changes or software on the computer before this problem?
You can follow this link & check if the problem persists.
Hope the helps of information.
Please post back and we do know.
-
Example:
NNooww iiss tthhee ttiimmee ggoooodd mmeenn ttoo ccoommee ttoo tthhee aaiidd ooff tthheeiirr ccoouunnttrryy aallll ffoorr...
Print appears as above, except that the spacing between the characters seem to be a space of 1/2 rather than a complete space.
Thank you
Hello- When you try to print?
- What were the changes made before the show?
- How long have you been faced with this problem?
You can view these methods:Method 1:I suggest you to check the print preview .Method 2:Uninstall the driver and the printer software:
1. open devices and printers, click the Start button, and then on the start menu, click devices and printers.
2 - Click on the printer you want to remove, click on remove the device and then click Yes.
If you can't delete the printer, right-click again, click Run as administrator, click on remove the device and then click Yes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.3. click on the properties of high print server of the screen and select the tab drivers, under delete evyrhing is installed as a printer except the xps document writer and send a note to the driver package.
Step 2.
Install the printer.
Now reinstall the printer, refer to the article below to install a printer.
Install a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers -
HP Deskjet 5150 will not my laptop HP4520s print using Windows 7 Pro
printer is connected directly to the laptop but will not be installed. Need a driver to work with Windows 7; want this printer available to other computers on our home network. Gary TX
How to add a printer in Windows 7...
http://Windows.Microsoft.com/en-us/Windows7/install-a-printer
When you get to the part where you have the possibility to search on Windows update, take it.
The 5150 will install and it did for me since 2003.
If your computers are running all Vista or Windows 7 or 8, set up a group home on the computer that hosts the printer, preferably one that will always be connected and look for a network printer on all of them except the host that should already work.
-
Installation of printer using Vista
After using printing HP and Dr. Scan, I uninstalled all my Photosmart D110A drivers and software by its recommendation. When I tried to reinstall the HP site fom, installation continiously has crashed or locked up. Then in my last attempt, a message popped up indicating that Vista was is no longer supported by HP... Any ideas how to get my drivers and software reloaded?
What is the downloaded file?
On the download is complete - try right click on the .exe and select "run as Administrator".
-
Photosmart printer HP110a: HP 110a won't print using windows 10
After you have installed Windows 10 my HP 110 has worked for two days then quit printing. I tried to uninstall the printer and the software then reinstalling following procedures all the recommended. Nothing works. Set up the printer and print test pages but printing from my HP laptop does not exist. I know the printer features fine I can use ePrint from my iPad or iPhone but not my HP laptop! HP apparently has a problem with their pilots but apparently does not care to fix it.
Same thing at my residence of Missouri, I have a HP Photosmart 6450 and upgraded to the 10 window and the same problem occurred. Fine prints of my office with a cable and all Apple products, but not with the same HP laptop.
Correct your products. I'm not going to by HP or Prtinter computer aniother until that they solve their problems. It may be time to ditch Microsoft and HP and go to Apple.
If anyone has a suggestion to re [pair HP problems it would be apppreciated.]
He did start work with a casual of grip in quene. It is 100% better than before. Thanks for the help and the notification.
-
Re HP solution Center - install for 2600 printer using windows 7
I read all of the solutions that I can find, and it's not there!
I kept losing my printer 2600. He seemed to just go. I could reinstall with the installation software I downloaded, but then just leave. Then I removed the HP solutions Center restarted and I tried to reinstall the Solution Center. Now I get a message that it cannot find the installation file. It looks in the Directory isn't there. I continue to remove the old directory %temp%/7z***, but he can still find it. Help!
Hi tweb,.
Try using the brush included in the CD or download.
Of the Original installation CD:
1. Insert the CD in the drive and then cancel Setup
2. open my computer and click right then on the CD from the drive and select open
3 open the Util folder
4 open the CCC folder
5. run the L4uninstall.exe
6. once the uninstall is complete, restart the computer
7 run the Accessories\ System Tools Disk Cleanup
8. download and install the latest version of Adobe flash player
http://www.Adobe.com/support/flashplayer/downloads.html
9 download drivers and full software features
10. run the download to reinstall the printer
If the software has been downloaded and extracted to your system:
1. type % temp % in the field of race
2. Locate and open the folder starting with 7z (example: 7zS2356)
3 open the Util folder
4 open the CCC folder
5. run the L4uninstall.exe
6. once the uninstall is complete, restart the computer
7 run the Accessories\ System Tools Disk Cleanup
8. download and install the latest version of Adobe flash player
http://www.Adobe.com/support/flashplayer/downloads.html
9 download drivers and full software features
10. run the download to reinstall the printer
-
too small email printing using windows vista mail
The fonts on the screen is too small, even if the size of the text has the greater value. When I print, it's too, too small.
It is the mail program, not Live Mail.
Windows Mail uses the same as Internet Explorer print engine.For print size: IE | View | Text size | Carry out the adjustment.
-
I have an asus WL500g and I use it as a print server. On my big pc on windows 7. I managed to install the driver on the printer directly on the pc connection an update of windows to get the driver of the Sina. After installing the driver I passed it to the port by using the ip address of my router. It works, but my laptop doesn't have a parallel port, so it is not possible to obtain the driver. What can I do?
You do not want drivers for parallel port on the laptop anyway given that the laptop is not connect via the parallel port, but rather on the network. You would most likely want to install drivers on the laptop Asus print server, and then print to a network printer drivers. Download the Asus former and latter printer mftr. MS - MVP - Elephant Boy computers - don't panic!
Maybe you are looking for
-
iMac vesa support 5 k only from the factory? Or I can buy one?
I have an iMac 5 k, and I would like to know if I can by a Vesa Mount for her, or she just factory?
-
I will try to find how my laptop without the reset disk factory.
-
interruption of the wireless connection with the computer laptop and printer
We have a printer HP6500 we lost the connection Wireless to our Dell laptop. Whenever we need to print to bring the laptop to the floor and connect it with a cable to print. I tried to close the printer downstairs next to the laptop and the router
-
Choose a value in an input of Longitude
Greetings,I think it will be a pretty basic question, but I can't choose the best function. Here's what I want to do: I have a GPS that feed into my main VI giving the Latitude and Longitude. I want to use the value of Longitude to determine what UTM
-
When you try to open it, it says unidentifide problem windows can not open