Advances of paper but will not print using Windows XP, computer HP Pavilion DV6000 CTO laptop and HP PSC 2210 all in one with USB

Similar Questions

• PSC 2210 all-in-one: PSC 2210 all-in-one with Windows 10: ok printer but the scanner does not work

  
  

  Hey @Manu37520,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the scanning of your PSC 2210 all-in-one printer to your PC for Windows 10. The printer has no drivers for Windows 10. You will need to use a computer with an operating system prior to analyze.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Windows RT and HP PSC 1510 all-in-One printer connection

  Hi, I have a Windows 8.1 RT (Microsoft Surface 2) Tablet and HP PSC 1510 all-in-One printer cable. Now when I plug the printer via the USB port, there is no driver who finds himself to make this printer work with my camera. Does anyone have this problem or solutions? I tried to look at HP support and nothing there has been useful.

  Hello

  I'm afraid that the printer is not supported on Windows RT, as you can find listed in the following support document:

  http://support.HP.com/us-en/document/c03168175

  Kind regards

  Shlomi

• The paper - not found of jam jam error display. Will and scan. Test page printed successly but will not print documents, e-mails, etc. of the laptop. Can anyone help?

  With the help of HP Pavilion Entetinment PC and HP psc 1215 all-in-one

  Visit the website of HP support for testing, Diagnostics or troubleshooting processes for your printer can help determine where the problem is.

• Printer says I have ink in the cartridges but will not print black

  I have an HP Photosmart Premium C309g-m.  I am frustrated because for now, it will not print anything black.  The color setting shows that I have sufficient ink in all cartridges, including the ordinary and photo black black.  Should I assume that I have a bad ink cartridge (even if it was printing without problem), or is a printer problem?  I ran to the print head clean definition, but it did not help.

  It could be the cartridges, but I doubt it.  What you can try, is not this video, I'm going to the link below and also Bob Headrick printhead soaking.  I hope that will fix him

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/how-to-troubleshoot-print-quality-problems-video/m-p/4029104#M48162

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/HP-6500-Office-Jet-E709a-black-printer-cartridge-HP-920-not/m-p/447545#M36315

• HP 8600; Printer says it is ready for wireless printing, but will not print my documents. It prints all the pages of the test very well. What I am doing wrong?

  Printer says it is ready for wireless printing, but will not print my documents. It prints all the pages of the test very well. What I am doing wrong?

  Contact HP support.
  http://h10025.www1.HP.com/ewfrf/wc/pfinder?cc=us&DLC=en&LC=en&tool=&query=8600#n251

• my hp desk jet f2480 will copy but will not print blank pages only

  my hp desk jet f2480 will copy but will not print blank pages only

  Hello chevy-123

  Please try the following article, he can help solve your problem.

  Printing blank Pages

• HP deskjet 1000 do not print using windows 7 How to the printer driver

  My hp deskjet 1000 printer do not print using windows 7 How to the printer driver

  It worked before on this PC?

  Full features drivers are here, select the bit version correct victory

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=UK&DLC=en&sw_lang=&product=4066377#n187

• Bought a new computer with windows 7. "psc 2210 all-in-one ' will not work with it....

  I have a psc 2210 all-in-one printer that I love. I bought a new computer with Windows 7 and I can't make it work. The HP site said that I don't have to download the drivers because windows 7 has already installed, but the main thing is that I can't make it work. Anyone, please help. My printer works perfectly and I can't afford to buy another. (I have a 64 bit)

  HP should contribute to this situation. I'm a loyal customer of Hp, but it's ridiculous that they do not create a driver to work with their printers.  All computers are coming with Windows 7.  HP please find a solution!

  I could get my HP PSC 2210 all-in-one to print!  I don't know exactly, because I've tried everything I could think of.  My son is a computer on which it has upgraded to windows 7 (64-bit) several months ago - he was able to successfully print on my printer immediately.   I just did an install complete (I bought the full version, not upgrade) to windows 7 (64 bit) - a couple of days and I'm finally to the point where I'm trying to connect printers.  Here is what I tried... again, I tried several things, although I've been in that general area...

  connect the printer to the computer

  go to the CONTROL PANEL--> Device Manager

  Click the arrow to the left of the IMAGING DEVICES (to be developed)

  RT click on printer PSC 2200 (should be listed under imaging devices)

  Select PROPERTIES--> DRIVER, then uninstall

  Select / tick "remove the driver for the device.

  the printer will disappear from the Device Manager (and peripheral Imaging also if it was the only selection)

  Unplug the printer to computer

  re - connect the printer to the computer

  Device Manager automatically updated (takes a few minutes, the screen refresh let until the yolk! disappears).

  Go to the control panel--> devices and printers

  Select printer PSC 2200, select Customize your printer, then the printed test page

  I hope that you will get a valid test page.  If this is not the case, another option I tried was:

  Through the above scenario.  When you get to the step "select PROPERTIES--> DRIVER, then uninstall" Select UNINSTALL directly from this menu (be sure to select/check "remove software pilot")

  Continue with the remaining steps above.

  I also tried 'Update Driver' of one of the previous screens above... I would like to know if you have a bit of luck!   I'm sorry that's not accurate.  Yet once, I tried everything I could think of, and something finally worked!  (I don't think I tried to 'Turn off the pilot')   Good luck! .........

  ).

• I have a problem with the HP psc 2210 all in one printer.

  My printer is an hp psc 2210 all-in-one

  All main buttons are flashing and the message on my reading of the printer (Remove and check cartridge) t - it means to clean?

  Hello

  Equip your number of printer model to this site of HP drivers and support for this information and follow the troubleshooting steps for it.

  http://WWW8.HP.com/us/en/support-drivers.html

  Or ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  See you soon.

• Photosmart HP 5510 - will not print using black ink

  I have problems with my HP Photosmart 5510 all-in-One printer, because it will not print in black. All cartridges are brand new and are genuine HP cartridges. I've never used anything other than HP cartridges, and I believe that I have would be considered a very light printer user.

  I use a HP Pavilion Desktop PC (Vista Home Premium) connected to the printer via a USB cable.

  I have to 'reset' the printer (power cable removed for 20 seconds), I cleaned the print heads and tried to re-alignment of the printer.

  I ran HP print and Scan diagnostics and do the message "Everything out OK with your product." I then print a test page which "fails", that there is no black ink in use. The diagnosis confirms that the ink levels are all OK and that my printer uses HP authentic and than Normal inks or better quality is selected.

  The printer is a little over a year old and as mentioned has had very light use.

  There is no error - every reason to believe that everything is OK.

  I wish I had a solution to this problem.

  As by chance my previous printer a HP Photosmart 3210 all-in-One failed in a similar way, although in this case, the black was fine, it was impossible to print colors correctly. Once the printer was just out of warranty.

  Curiously enough and fortunately like few others on the forum a few days after the installation of the new cartridge, it seems to work perfectly fine again.  any ideas as to why this happens?

• Updated but will not print pages from the internet

  I had AdobeX, but he refused to print anything from Firefox, not even a selection. I deleted and I went back to 9.4, but it STILL will not print for me more. How can I fix it?

  OK, I got it - it turns out that the upgrade has changed the default printer in the settingds for Firefox... I won't go back to 9 or X however, as others seem to have hurt, too.

  FIXED - FIXED - FIXED

• Re: HP Photosmart 5510 - will not print using black ink

  I received a WARNING ink level so I went out and bought new cartridges. When I put the new in, black will not print.

  I followed all the instructions on my printer, all the instructions of the hp print & Scan Doctor and went out to buy a new black cartridge in the second.

  tracking of document Hp: http://support.hp.com/us-en/document/c03425035

  Still no black printing.

  I cleaned the print heads.

  So I have three cartridges of "True HP", two of them nine and no black print.

  Are there any other instructions that can be followed to fix my printer? It is more under warranty and there is no way I'm paying for a repair on a printer who leave work when installing a new cartridge.

  @lcaughey

  I'll me private message you on this (check in the envelope at the top right)

• HP psc 2210: clear jam on my hp psc 2210 all-in-one printer

  The lights on my printer and the message says: "open the door.  "Clear carriage jam, and then press ENTER.  I do not see a "jam", opened the door and press enter several times.  I still can not reset unplugged machine from one day to the next.

  I think the cartridges are "stuck" on the side of the machine and they are unable to drag in the middle.  Can someone tell me how to fix this jam?

  Would be very grateful for the help!

  Renee'

  Hi @sreneecesand welcome to the Forums of HP!

  I see that you are having problems with jam.  I would like to help!

  I recommend starting by remove (if possible) ink cartridges and perform a power reset the printer.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.
  
  I would also say to following the steps outlined in this document:

  A display of the Error Message of "open door, clear transport jam, and then press enter" for HP PSC 2170 2100 and 2210 all-in-One Series Printer "

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• L7580: HP All In One L7580 - Scans but will not print or copy

  Last problem with the L7580: this machine will scan but not print or copy.  All four color cartridges are good, remaining.  He machine is not used as often as it should be, but copied and printed a few weeks ago.  Any suggestions?  Thanks for any help.

  Hi @kkpb,

  Welcome to the Forums of HP Support!