Installation of the certificate with no shown CSR ASDM ASDM
My ASA will be used as a VPN concentrator. I need to have an ID certificate applied to an interface.
I created the Trustpoint. I generated a CSR. I sent the CSR to our Cert ID provider
When I went back to the ASA the Trustpoint pending information (under Configuration > Device Management > Certificate Management > identity certificates) which would have allowed the installation of the certificate is no longer there.
How can I import this certificate and associate it with the good Trustpoint.
Thank you
Will be
Hello babylon5,.
You want to recreate the trustpoint, using the same information that previously used. The most important thing is that you select the same rsakeypair you have selected/created the first time. As a long time that the RSA key pair match things should be fine.
Can authenticate the trustpoint with the signer of the certificate... and finally install your new certificate.
If you don't remember the original RSA key, you should be able to request that they sign another CSR instead of the one that you just used so that you can get the appropriate public key.
-Craig
Tags: Cisco Security
Similar Questions
-
See 4.5 SSL fails after installation of the certificate
I have a problem after installation following the steps described in the VMWare KB (and a bunch of other places) a certificate is currently working on an assessment of view 4.5
I set up the environment and everything worked without problems. Then I installed a certificate using the keytool and the steps described above, ssl connections ceased to work. The admin page would be just a moment and my client view (currently on trial with the OS X client) would also expire during an attempt of SSL connections. I had previously enabled connections not secure so that both connections use http still operate.
The only difference in my SSL import procedure, it's that I signed the certificate using our AD CA. I imported the complete certificate chain as a .p7b file and keytool complained that he did not trust my CA, (I said yes to import in any case).
After this issue, I even tried to go back to the original signed cert free by removing the key file and the file locked.config and SSL still does not work.
Looking through the logs of the events on the server, there is no error SSL and the view admin page itself don't report problems with the server.
The only other reference to a similar problem, I have seen on this subject is another post on the forums, but it appers that issue was because the server was also the Wyse report server running on this issue, my server is running anything else that the display manager, I do not use a security server just one server.
Hello
> I had previously enabled connections not secure so that both connections use http still operate.
The option ' require SSL for client connections and Administrator display: "is common for the customer and Admin UI connections.
Because you have disabled this option, only the connections non - ssl will work for both.
Connect to youyr Admin UI by using http://serverfqdn/admin/ and enable this setting and restart the login server.
-Noble
-
ASA 8.4.3 install the certificate for webvpn without CSR
Hi guys,.
I have spent a lot of time trying to install our wildcard certificate in the ASA for use with anyconnect, but was not permanently misserably. I red a lot of messages, but don't really know what I'm doing.
Our Web server, I got DigiCertCA.crt, star.mycompany.com_cert.pem and star.mycompany.com_key.pem. The certificate is a certificate wildcard for mycompany.com.
The DigiCertCA.crt file is the certificate called "DigiCert High Assurance CA-3" on the Web site: https://www.digicert.com/digicert-root-certificates.htm
with the series "0A5F114D035B179117D2EFD4038C3F3B".On the SAA, I checked that I have no present trustpoint. Orders: "sh ca crypto certificates" and "sh crypto ca trustpoints" give no output.
OK, so lets get started to set up and are having problems:
ASA (config) # crypto ca trustpoint star.mycompany.com
Domain name full webvpn.mycompany.com ASA(config-ca-Trustpoint) #.
ASA(config-ca-Trustpoint) # Terminal registration
ASA(config-ca-Trustpoint) #-revocation checking no
Output ASA(config-ca-Trustpoint) #.
Authenticate the crypto ca ASA (config) # star.mycompany.com
Enter the base-64 encoded certificate authority.
End with the word "quit" on a line by itself
-BEGIN CERTIFICATE-
# CONTENT DigiCertCA.crt #.
-CERTIFICATE OF END-
quit smoking
INFO: Certificate has the following attributes:
Fingerprint: c68b9930 c8578d41 6f8c094e 6adb0c90
Do you accept this certificate? [Yes/No]: Yes
Trustpoint "star.mycompany.com" is a subordinate certification authority and is a non self-signed certificate.
Certificate of the CA Trustpoint accepted.
% Certificate imported successfully
ASA (config) # crypto ca certificate star.mycompany.com import
ATTENTION: Registration certificate is configured with a complete domain name
that differs from the fqdn of the system. If this certificate will be
used for VPN authentication, this can cause connection problems.
You want to continue with this registration? [Yes/No]: Yes
% The FQDN in the certificate name will be: webvpn.mycompany.com
Enter the base 64 encoded certificate.
End with the word "quit" on a line by itself
-BEGIN CERTIFICATE-
# CONTENT star.mycompany.com_cert.pem #.
-CERTIFICATE OF END-
quit smoking
Could not import the certificate-
Certificate contains a general practitioner of the device public key
for point star.mycompany.com trust
ERROR: Cannot analyse or check the imported certificate
ASA (config) #.
Please help me! I'm not a guru with certificates.
Kind regards
Tom van Leeuwen
Tom,
you create a container PKCS12 which includes certificates, and CA key.
I don't know how to do with linux, no idea with Windows
Michael
Please note all useful posts
-
unlock the certificate with the blank password (no)
Hello
on the certificates (https://build.phonegap.com/people/edit#unlock-key ) page when I upload the .p12 file created with NO password export,
It seems that I can't unlock it, because the popup of release must have a certain value in the password field.Also, I tried to unlock using the API:
CURL u [email protected] : k d thepassword "data = {\"password\":\"\ ""} ' SET x https://Build.PhoneGap.com/API/v1/Keys/iOS/549200
but it does not work as can be learned also the docs:
-api-v1-cles-plate-forme-id http://docs.PhoneGap.com/PhoneGap-build/developer-API/write/#-put-HTTPS-build-PhoneGap-com-Is it possible to build with this certificate without password?
Thank you!
Are mix you the push notifications certificate and the certificate of construction?
The APNS certificate is not used for the signing of iOS apps, it's only for your credentials to push notification server.
-
New vSphere Windows 2008 R2 Server fails, the installation of the server with error 1920
Band new installation of Windows Server 2008 R2 SP1 with all updates.
Try installing vSphere CU2 5.5 Server build 2183112.
Try the 'Easy install' or 'Custom Installation' I got the following error when the Single Sign-On is trying to settle.
"Error 1920. Service "VMware Directory Service" (VMWareDirectoryService) failed to start. Check that you have sufficient privileges to start system services. »
The event log shows this is not much help.
"VMware Directory Service service failed to start due to the following error:
Service has failed to demand launch or timely control.
I have re-uploaded the iso with the same result and even try to install CU1 but who also failed with the same error.
I tried http://kb.vmware.com/kb/2069695 with the same failed results.
Setup log is attached.
Problem has been fixed.
I hope this solution will help others also (perhaps through a keyword to Google/Bing search)
Have no Dell Host Integration Toolkit (I 4.7.1) installed when you perform an installation/upgrade of Single Sign-On. Once the VMWare software install then you can install the Dell Host Integration Toolkit.
According to VMWare Support, this is a known problem (internal documentation) and want to resolve it shortly.
-
installation of the application with sqlplus
Hello
I have the following scenario:
-Apex 4.0
-export file a single application
-a workspace
-diagram of several assigned to this workspace
Now I want to import the application several times to the workspace using sqlplus, once for each schema.
The id of the application, the alias, analysis of schema etc is in the export file.
I had a look on the apex packages and found the package with several GENERAL wwv_flow_application_install to define the schema, the application id and alias analysis before calling the export.sql
Works fine for the first importation, the application is imported with the correct analysis scheme, id, and the alias.execute wwv_flow_application_install.set_schema('SCHEMA_1'); execute wwv_flow_application_install.set_application_id(12345); execute wwv_flow_application_install.set_application_alias('F12345'); @my_application_export.sql
Now, when I try to import the application with a different id, alias and the analysis of schema in the same workspace
I get an error:execute wwv_flow_application_install.set_schema('SCHEMA_2'); execute wwv_flow_application_install.set_application_id(65432); execute wwv_flow_application_install.set_application_alias('F65432'); @my_application_export.sql
When I import the application using the application builder and define the schema of analysis etc. I can import demand several times without problems.APPLICATION 106 - my application Set Credentials... Check Compatibility... API Last Extended:20100513 Your Current Version:20100513 This import is compatible with version: 20100513 COMPATIBLE (You should be able to run this import without issues.) Set Application ID... ...authorization schemes ...navigation bar entries Error creating navigation bar item id="91129183824345698" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_ICON_BAR_PK) verletzt ...application processes Error creating application process id="91184561050363427" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="94471501492414709" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="4734332482474485" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="4737523393840829" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="4747127090401771" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="4916531867947984" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="5236411991076929" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="5857313156776584" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="5932521460840544" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="5938622965525301" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="5992517174351260" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="6009310642772640" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="6079621803374367" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="6092717493593733" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="6100522029483985" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="6118725383621366" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="6146811566877954" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="6166435242762819" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="6200519408694365" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="6227109377463024" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="6233624491883782" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="6255122580895619" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="6305417867615949" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="6309623136872952" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="6337509623905694" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="6365129764763819" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="6379026467934288" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="6394407848008983" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="6509116697050810" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="6541413119009899" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="6608531047328317" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="6700508853725646" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="6742324554251594" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="7334514015119063" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="7670522690946938" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="8072506577416735" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="20009752285410609" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="20081548848027299" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="20708543788789763" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="22731153197043083" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="23523833777980429" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="24844033599530488" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="27305353374170934" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="50466671966030885" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="71901123603261194" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="71911102497406549" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="72945796839696358" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="75611727489424522" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="83225345045878412" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="85610253193310459" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="87067130819049895" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="88056347915314075" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="88075722288656811" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="88345731653374697" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="88845427889263923" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="88910422356738385" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="91811388351479750" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="93125490117100045" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt Error creating application process id="95423105549600047" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_PROCESSING_PK) verletzt ...application items Error creating application item id="91496701517163955" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_ITEMS_PK) verletzt Error creating application item id="95462704735366247" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_ITEMS_PK) verletzt Error creating application item id="74925098071894457" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_ITEMS_PK) verletzt Error creating application item id="85623631562417725" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_ITEMS_PK) verletzt Error creating application item id="85623227060416485" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_ITEMS_PK) verletzt Error creating application item id="94468785778400675" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_ITEMS_PK) verletzt Error creating application item id="91131199188348715" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_ITEMS_PK) verletzt Error creating application item id="8268524672993859" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_ITEMS_PK) verletzt Error creating application item id="7892535820341915" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_ITEMS_PK) verletzt Error creating application item id="91189887631389994" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_ITEMS_PK) verletzt Error creating application item id="6112405616741037" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_ITEMS_PK) verletzt Error creating application item id="72925413621587631" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_ITEMS_PK) verletzt Error creating application item id="72916299722555256" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_ITEMS_PK) verletzt Error creating application item id="72868617917973832" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_ITEMS_PK) verletzt Error creating application item id="20812229261224610" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_ITEMS_PK) verletzt Error creating application item id="20002242542379371" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_ITEMS_PK) verletzt Error creating application item id="88055245014303801" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_ITEMS_PK) verletzt Error creating application item id="88069326341525493" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_ITEMS_PK) verletzt Error creating application item id="88059145884341899" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_ITEMS_PK) verletzt Error creating application item id="20013855758487357" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_ITEMS_PK) verletzt Error creating application item id="88517351238438154" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_ITEMS_PK) verletzt Error creating application item id="23556552890515825" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_ITEMS_PK) verletzt Error creating application item id="20001839772378565" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_ITEMS_PK) verletzt Error creating application item id="93127187824108820" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_ITEMS_PK) verletzt Error creating application item id="93126782976107414" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_ITEMS_PK) verletzt Error creating application item id="93126101545103287" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_ITEMS_PK) verletzt ...application level computations Error creating application computation item="HOST" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_COMPUTATIONS_PK) verletzt Error creating application computation item="G_DIALOG" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_COMPUTATIONS_PK) verletzt Error creating application computation item="SYSTEMDATUM" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_COMPUTATIONS_PK) verletzt ...Application Tabs Error creating standard tab id="95573900545089290" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_TABS_PK) verletzt Error creating standard tab id="91601580463245325" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_TABS_PK) verletzt Error creating standard tab id="91876081329026683" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_TABS_PK) verletzt Error creating standard tab id="91608101550298709" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_TABS_PK) verletzt Error creating standard tab id="93777386111792822" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_TABS_PK) verletzt Error creating standard tab id="94269708930733587" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_TABS_PK) verletzt Error creating standard tab id="95195786406758840" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_TABS_PK) verletzt Error creating standard tab id="96143106731104676" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_TABS_PK) verletzt Error creating standard tab id="97050786059624809" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_TABS_PK) verletzt ...Application Parent Tabs Error creating parent tab id="98699999723200562" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_TOPLEV_TAB_PK) verletzt ...Shared Lists of values Error creating list of values id="5940425154734029" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_LOV_PK) verletzt Error creating list of values id="6040821434023266" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_LOV_PK) verletzt Error creating list of values id="8142335285688267" ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_LOV_PK) verletzt begin * FEHLER in Zeile 1: ORA-00001: Unique Constraint (APEX_040000.WWV_FLOW_LOV_DATA_PK) verletzt ORA-06512: in "APEX_040000.WWV_FLOW_API", Zeile 2843 ORA-06512: in Zeile 3
Why do I get these errors when I use sqlplus to import the application?
Thanks for the help in advance,
DirkDirk:
Add the following and you should be able to import the application again:
execute apex_application_install.generate_offset;
Kind regards
Jason
-
Installation of the application with the engine running and system Config API kills many services OR
If I have an empty Windows 10 computer and install LabVIEW 2015 SP1f5 Run-time-Engine, then System Configuration 15.3.
I see that several OR services are running OK on the machine subsequently:
However, if I can install a built (LabVIEW 2015SP1) app - using an installer which includes also the 2015 SP1f5 RTE and the configuration of the system API 15.3, five services will not start and cannot be started manually either (affecting all the services into recovery mode restart fails too). Error code when you try to manual start is 1068 that indicates they are missing a dependency, but * any * of them will start...
I suspect that is the reason that neither Max 15.3 ends with a timeout during the peripheral configuration warning - AND my use of RAD / system configuration set image function is a failure...
Why the hell the same software support (which should really be installed in all cases, the application itself must be installed) has this devastating beats me. The only way to obtain the services of backup and running is to uninstall everything, even to delete all files remaining and records... and then reinstall the original RTÉ and SysConfigs.
The problem seems to be a sort of obscure corruption both of my computers for development... I took the same source code and built the installer on a third computer with all the same IDE versions, and voila - everything works well.
It would be good to know exactly what the problem is, but for now at least, I have a solution... (hopefully fix my machines and/or before you wipe them clean and reinstall the IDE together on them will get back on track...) Without knowing what the cause was however makes me wonder if I might have the same problem again later).
-
Tecra 9100: Installation of the printer with docking station connected
I have a Tecra 9100 with a docking station that run under WIN - XP SP1. Trying to install my printer, an Epson 740 with USB connection, I found that I need to create 2 entries for the same printer, 1 environmental off-STATION and 1 for MOORING environment, known as the XXX (1 copy). Is this normal or have I done something wrong.
This is different from my old Portege that keeps the 2 hardware profiles, 1 connected uindocked and 1, and there is only 1 entry in the Printers folder.
Also, if I unplugged the printer from the docking station and later taking again on another USB port,
He will ask reinstall me the printer again.Thanks for any comments from anyone.
I have Tecra M1 and use it on the same port replicator as you have your 9100. The same happen to me if I want to use the webcam on different USB ports. Use it on the same there is no message but using the second port he asks the driver.
It seems to be normal. :)
-
Installation of the license with VRTE7.1.1 Manager
Help. I'm trying to deploy my application. It is an image processing program, so that it uses the Vision runtime (7.1.1) but not Aqcquisition package. I can install it, and it works very well. However, it does not install the License Manager, so I can't activate the run-time I bought a license for.
How to install the License Manager so I can activate this software?
This says that the License Manager installed with software that requires a license, but that is clearly not the case.
What am I supposed to do?
Thank you.
CyberMat,
According to this knowledge base article, you have not need activate runtime of Vision to the version prior to 8.0. So it should be good that the License Manager has not been installed.
-Christina
-
Installation of the CS6 with OS needing an upgrade
I have just download the CS6 Master Collection trial and after waiting 2 hours for this download and intall, the issue was raised that:
OS does not meet the minimum requirements for this installer. 10.6.0 is the minimum required for installation.
I am running 10.5.8 and can't seem to find a way to improve my OS. My Mac has never prompted me to this level and I really wish it had! I need to use CS6 as soon as possible and would appreciate any help on this!
Point full versions of Mac OS x must be purchased. Check the apple app store.
Mylenium
-
installation of the web with MX 2004 DW counters
According to the literature, it seems so easy - but...
I created a web counter of www, com seemed simple enough - style and select options, submit info and voila, they send you the HTML 'insert into your html code.
now, it's when I'm completely lost. I can indeed copy and paste the code string that they provided - BUT it just comes as a string of text on my page! NO cute little box of numbers, no matter how, I insert the code, or place it on the page. I tried to make the scree of design, the code form and then with the split screen - same results. When I download it stll shows a gobbldegook text string that has no resemblance to a counter.
What Miss me? (I'm NOT a computer guru, or I do not understand html language - that's why I got Dreamweaver!)
any help would be greatly appreciated.
Kate> Am I understand that the ENTIRE string of code is stuck in the
> See the code?Yes. It's a tag of the image - use as code and design. Click on design mode
where you want the counter to show. then find the cursor in code view and
Paste the code there.--
Alan
Adobe Community Expert, dreamweaver -
Installation of the HDD with Window XP Pro on another motherboard
I want to upgrade my Gigabyte mobo to a new mobo Gigabyte and processor. But I want to use the hard drive I have that has Windows XP Pro retail. The connections are correct, but I'm worried about the operating system. What, on the contrary, what I should do or not can be as simple as to connect the player to the new motherboard?
Hello
We need to reactivate the Windows XP operating system after replacing the motherboard and processor.
For your reference:
How to find a phone number for a Microsoft Product Activation Center: http://support.microsoft.com/kb/950929
How to activate Windows XP: http://support.microsoft.com/kb/307890
Hope this information is useful.
-
Installation of the OSB with regard
Hi all
I created a weblogic domain and my admin and the AOS (SOA Suite 11 g 1 material) are running. Now, in the same area, I want to install OSB11g also. Can someone please suggest if I can of the OSB now. ?http://blogs.Oracle.com/middleware/2010/05/installing_soa_suite_11113.html
Kind regards
Anuj -
Digital installation of certificates with the private key
I installation of digital certificates in three servers, each of them with Windows Server 2012 R2 Standard but just in one of them, the private key information remain available after installation. The purpose of these servers is to secure the communication with an instance of SQL Server that is installed on each server
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
What are the original applications for the iPhone 6 s. I had to sync to my iPhone 3g to my new 6s in order to maintain my contacts. Unfortunately, I lost a lot of these new applications. can someone please send screenshots of an iPhone running 6s with applications shown. I need pages other than the home page. Thank you!
'Stock' apps are part of the installation of iOS and cannot be removed, so there is nothing to verify or prove.
When you move to a new phone, just need restoring your old backup phone and compatible applications will be synchronized to the new.
Maybe you are looking for
-
Mac OS 10.6.8
-
I want to disable facebook notifications that appear when I start firefox.
I added the Add on Facebook. When I did I started having these Facebook notifications that appear on the home page. I want to disable them.
-
Re: Satellite A300-1 MW: how to change the button to start the sonique player
Hello I have a question.I want to change the option on one of the button control (this one with open windows media player) and it will open a Sonic player.I've read about change in winamp, but I can't do it in Sonic. Please help me!
-
Connection USB Samsung S4, Windows 7
Hello I have Samsung Galaxy S4, whenever I connect it to my laptop (Windows 7 Home Premium edition), it detects the usb only connection by the (sound beeb), and sometimes he says: «cannot install this driver...» "a mistake like that, and sometimes it
-
Disappeared from my horizontal scroll bar.
Disappeared from my horizontal scroll bar. I opened Premiere Pro with ALT + SHIFT pressed down. I installed CCleaner and it ran. Subsequently uninstalled and reinstalled and the bar is not yet there. I make videos for Christmas gifts and really n