Connection USB Samsung S4, Windows 7

Similar Questions

• Samsung tablet driver does not connect with my computer (windows 7)

  Hello I have a Windows 7 right and whenever I connect my Samsung galaxy tablet 3 USB it says device driver software was not successfully installed. I checked the updates, it didn't work, but I check the properties of the device it says error code 10

  Hello jasmine,.

  Thanks for posting your question on the Forum of the Microsoft community.
  1. If it works much earlier? If Yes, did you of significant changes to the computer before this problem?
  2. Have you tried to connect the tablet to another USB port on your computer?
  3. Are you able to connect the tablet to another computer?

  I understand that you get an error code 10 device when you plug your tablet computer. This error is due to some kind of unspecified driver or device problem. In your Windows Device Manager is not able to start the unit due to a driver-specific is not recognized. So, let's try a few steps to start in the right direction, diagnose the root cause and solve your problem.
  Method 1:
  Try to follow the steps described in the following link and check if the problem persists:
  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Method 2:

  You can also download the Software Kies from Samsung for Windows that allows you to connect your phone to your personal computer, makes it easier for you to synchronize data between the devices.

  Samsung Kies 

  Hope this information is useful. If the problem persists, please post back your results for further assistance, we will be happy to help you.

• You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed

  You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed. Thanks for your help

  diana73,

  First of all, make sure that you're connected Administrators account to do.

  How to change a drive letter to change an existing drive letter on a drive, on a partition, or a volume, follow these steps:

  1. Sign in as an administrator or as a member of the Administrators group.
  2. Click Start , click run and type compmgmt.msc .
  3. In the left pane, and then click disk management .
  4. Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths .
  5. Click change .
  6. Click assign the following drive letter if it is not already selected, click the drive letter that you want to use, and then click OK .
  7. Click Yes when you are prompted to confirm the drive letter change.

  The letter of the drive, partition, or volume that you specified is changed, and the new drive letter is displayed in the appropriate drive, partition, or volume in the disk management tool.

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• Where can I find the Bluetooth driver to connect my Samsung SCH-U640 phone to Windows 7?

  I need driver to connect my Samsung SCH-U640 phone to Windows 7 Home Premium. Where can I find this driver?

  Hello

   
  I suggest to visit the following link and enter the subcategory, the name of the model and the model code to download the necessary drivers.
  
  http://www.Samsung.com/us/support/downloads/Verizon-Wireless/Sch-U640EKAVZW
  
   
  Check if it helps.

• Hi, I have a camcorder Sony TRV 356 I am unable to connect on vista or windows 7 via USB

  Hi, I have a camcorder Sony TRV 356 I am unable to connect on vista or windows 7 via USB

  Hello Sajid,

  The community here is about the countries United States, Canada and Asia-Pacific. Your DCR-TRV356E model is a model British camcorder.

  However, to answer your question,.

  The DCR-TRV356E USB streaming function is not compatible with the operating system Windows Vista and Windows 7. You can connect the camcorder to the computer using the A / V cable connection or using an i.Link cable.

  You can visit the European Forums of suggestions regarding the transfer of videos to Windows Vista or Windows 7 computer.

  http://www.Sony.co.UK/discussions/community/en/support/cameras_and_camcorders

  If my post answered your question, please mark it as an "accepted Solution".

  Thank you for your message.

• Pouvez the Superdrive Apple USB used with windows computer

  Can I use the Superdrive Apple USB with the windows computer

  Only on a USB Bus, which can provide more standard power 500 milliamps.

  Apple computers that support this drive directly have a USB function that allows it to attract more of the standard.

  Drive sharing

  If your Mac is not a built-in optical drive, and you must use a CD or DVD, you can connect an external drive as the SuperDrive Apple USB.

  You can also share disks of the optical drive of another Mac or a Windows computer that has the DVD or CD sharing Setup installed. Sharing of CD or DVD allows you to access documents stored on these disks and allows you to install some software.

• Application that created on another computer will not connect usb-camera

  Hello, friends!

  I have a problem:

  My application that was created on my computer does not connect usb-camera on the other computer. I installed the LabView run-time engine and the runtime of vision on this computer but it is not useful :-(application is open, but the usb device not running.

  I'll be thanked for any help with this problem!

  Thank you very much!

  It's the solution to the problem:

  Solution:
  To run an exe containing NEITHER-IMAQ for USB functions, follow these steps on the computer that is running the EXE file:

  1. Install the following execution engines:
     • LabVIEW Run - time Engine (same version that was used to develop the VI)
     • Execution of vision engine (same version that was used to develop the VI)
       • One Vision single-seater deployment license is required for each computer target on which you install the runtime of the Vision. See all the related links for more details.
  2. Copy the following dll files to the directory on your development computer system, usually C:\Windows\system32 directory of your target machine system.
     • ImaqDirectShowDll.dll
     • ImaqDirectShowExport.dll
  3. Register at ImaqDirectShowExport.dll by the Windows Start Menu , click run. Type regsvr32 C:\WINDOWS\system32\ImaqDirectShowExport.dll, and then click OK to register the DLL.

     If you are on a different operating system or if the system folder is different and that you want to copy the path instead of typing all the way, you can drag the file to the command line at the prompt to run it, highlight the path, right-click and select it copy.  Paste in the command prompt by right-clicking and selecting window block.

     The ImaqDirectShowDll doesn't have to be registered.

  Once these steps are completed, and the DLL is registered successfully, your EXE will work.  Vision Acquisition software or Vision Development Module must be installed on the target computer.

• How to connect my Samsung wave with my laptop via wifi?

  original title: wifi connection

  HOW TO CONNECT MY SAMSUNG WAVE 525 WITH MY DELL INSPIRON 1525 BY WIFI

  Hello

  I suggest you follow the links below and the Coachman

  Add a device or computer to a network

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-a-device-or-computer-to-a-network

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  You try to connect the phone directly on the system or through a router?

  You will not be able to connect the cellphone to the PC directly,

  See the explanation: http://www.samsungwaveforum.com/samsung-wave-troubleshooting/connecting-wave-to-pc-through-wifi/

• Internet connection drops connection USB

  I use windows vista and have broadband connected wireless.  Whenever I connect the printer via USB and the impression that I lose my internet connection and the printer stops working.  This happens everytime I use the USB port, I tried all ports that a USB is connected with internet connection is lost and I don't understand why!  Can someone suggest a resolution?

  Hello

  1. USB devices work when it is connected to the USB ports?

  2. What is the brand and model of the printer?

  3. When does work well before?

  4. you remember to make changes to the computer before this problem?

  Method 1:

  You can try to reinstall all USB controllers and check.

  Note: If you use a USB mouse, please follow the steps of "Using the keyboard" to reinstall the USB controllers. Windows 7 will reinstall all the controllers automatically after restarting your computer.

  Step 1:

  If you do not use a USB mouse, and then follow the steps:

  First of all, please disconnect all USB devices and then perform the following steps:

  a. click "Start", type "Device Manager" (without the quotes) in the search bar and press "Enter." If necessary, click on continue.

  b. in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click 'OK '.

  c. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows Vista will automatically reinstall all USB controllers.

  Step 2:

  Follow the steps if you are using the keyboard to uninstall the USB controllers.

  First of all, please disconnect all USB devices. Then go through the following steps:

  a. press "Ctrl + Esc" to open the Start Menu.

  b. management of devices of the type in the search bar and press "Enter." If necessary, click on continue.

  (c) in the Device Manager, press Tab and use 'Up' and 'Down' to move the selection from 'de Bus USB controllers '.

  d. Press 'Right' and expand it.

  e. press "Down" to move to the first item, and then press "Delete" to delete.

  f. Repeat step 5 and uninstall everything under 'controllers of Bus USB '.

  Method 2:

  You can check if the printer is compatible with Windows Vista.

  See the link for compatibility:

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/

  Method 3:

  You can also try to update the wireless card and check.

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  Hope this information is useful.

• Problem does not occur when it is not connected USB so that it looks like some sort of communication problem. The L355 worked perfectly.

  Hello

  I recently installed an Epson L555 instead of my Epson L355, which worked well with my software windows 7 and my BACK program based. However, whenever the L555 turned the printer just keeps ejecting the hopper pages until it is empty. On the menu screen, it says "printing", but there is nothing in the print queue and I didn't send anything to be printed. Sometimes it reads "Fax set auto answer. By pressing the Stop/Reset button stops the ejection pages and "Cancel" is displayed on the screen. This continues for about 2-3 minutes, then the pages start ejected again. Problem does not occur when it is not connected USB so that it looks like some sort of communication problem. The L355 worked perfectly.

  Hello

  Thanks for posting your query in the Microsoft community.

  I understand that print jobs are getting cancelled and I will be happy to answer your query. There could be several reasons for this cause and to diagnose the problem, initially, I ask you to refer to the suggestions in the article below and check.

  Solve printer problems

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• I need to make a usb bootable for windows 8.

  Bootsect.exe

  I can't download the bootsect.exe from the store.  Only get the file iso32 integer or an image file or download... Manager what is the problem?  I need to make a usb bootable for windows 8.  I am running windows 7 32 bit.  What's wrong with the instructions for download

  Go to the Microsoft Store website, sign in with your bank account, select Download Options and select Windows 7 64 bit and proceed to download.

  1. connect to your Microsoft Store account to view your purchase history

  2. search for your purchase of Windows 7.

  3. next to Windows 7, there is a drop-down list "additional download options.

  4. in the drop-down menu, select "32-bit ISO."

  5. right click on the link and then save the bootsect.exe file to the location where you installed the Windows 7 USB/DVD Download Tool (for example C:\Users\username\AppData\Local\Apps\Windows 7 USB DVD Download Tool).

  6. once the file has been saved, return to the Windows 7 USB/DVD Download tool to create your bootable USB device.

  or

  (1) download and install the Windows 7 USB/DVD Download Tool program, as described on the Microsoft Store website.

  (2) download a 32-bit version of bootsect.exe work. Here is a link to the 32 bit bootsect.exe:
  http://www.SevenForums.com/attachments/installation-setup/47060d1263222191-32-bit-Bootsect-bootsect7600x86.zip
  From: http://www.sevenforums.com/installation-setup/54443-32-bit-bootsect.html

  (3) once downloaded, copy the BootSect.exe file in the same folder that contains the file Windows7-USB-DVD-Download - Tool.exe installed. This file in Windows Vista's default installation directory is C:\Users\USERNAME\AppData\Local\Apps\Windows 7 USB DVD Download Tool\ (you need to look in XP)

  (4) application of the Windows 7 USB/DVD download tool as indicated on the web site of Microsoft Store. The end result will give you a boot USB flash drive that contains everything you need to install the 64 bit version of Windows 7.

• Smartphones blackBerry 9360 connects USB

  My girls used to connect USB phone and you could see his phone from the computer (iMac, Windows). Now, when she chooses USB he doesn't ask password and connects only to load as if she chose Charge Only.

  I don't think it's the computer, the same effect on our iMac and 2 Windows computers. Is there a setting on his phone that needs to be changed, or a updated software (it seems to be completely up to date)

  This problem started occurring a couple of weeks.

  Hello and welcome to the community!

  It is possible that the mass storage Mode was cut on the BB, which would translate as you indicate. Check here:

  • KB13564 How to enable or disable the mode on the smartphone BlackBerry mass storage.

  Otherwise, each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  Good luck and let us know!

• Problem with USB HUB using Windows 7 on Bootcamp

  I have an iMac when I installed Win 7 with Bootcamp. I have problem with USB hub. If I connect USB devices (printer, iphone... etc...) directly to my computer, it works without any problem. But if I connect them through USB hub, that they do not work properly. The sound instantly invites you, but certain peripheral functions partially and some not at all. I tried several USB hubs... same problem for all. Any solution? Thanks a lot for your answer.

  Hello

  I suggest you to see link and check.

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  I also suggest you to contact the apple support and check.

  http://www.Apple.com/support/

• Auto Connect USB devices?

  Is it possible to get the customer discovers automatically connect a USB device when it is plugged on the endpoint?  More precisely from watching this for USB flash drives.

  A few times I set to make sure that we are on the same page.

  Me auto connect USB devices average transmit any USB device connected to the customer automatically to the virtual desktop without user interaction.

  This function exists today with view depending on the client device that you use. It works with RDP when using a Linux-based system think that customer and PCoIP with Linux customer base light or zero clients.

  Capacity does not currently exist with the Windows client. It will exist in the future with the Windows client if the device is set before the start of the session. If tied after the start of the session, it will still a user interaction.

  WP

• Problems of latitude E6530 USB 3.0 Windows 8

  Hello

  The left USB 3.0 on my Latitude E6530 does not work when I connect a USB 3.0 device to it. If I plug in a USB 3.0 in device after Windows starts, it does not recognize anything connected to this port. If I connect a USB 3.0 device to the front port to turn the system, Windows will recognize the device once it starts (it will mount an external hard drive, for example), but will immediately report there is error when loading it. This port usually does not recognize devices USB 2.0 without any problems.

  USB ports are working fine. I can connect USB 3.0 devices in the USB 3.0 port right, and they work. I can plug in devices USB 3.0 to one of the USB 2.0 ports, and they function as devices USB 2.0, as expected.

  I am running Windows 8 Pro.

  It's probably a driver issue or a hardware issue?

  Thank you.

  I have the e6530 of Latitude with the docking station and NONE of my USB 3.0 ports act as 3.0.

  But I'm happy to say that it is corrected now! :)

  I had later "Intel USB 3.0 eXtensible Host Controller Driver" is downloaded from the Dell site and Device Manager reports no problem - but every time I have pluged a USB 3.0 device in any of my "SS" USB 3.0 ports I am greeted with the message "this device could accomplish a lot faster..." "in my systray.  :(

  I downloaded USBTreeView (freeware) and when I connect a device, according to me, it connects to a USB 2.0 hub port.  No 3.0 ports under my "Intel USB 3.0 eXtensible Host Controller Driver" were already used.  :(

  But this thread solved my problem. The problem is the last "Intel USB 3.0 eXtensible Host Controller Driver" driver on the Dell site is almost a year older than the latest in Intel.  Thank you JeanPier - your message has reported me here:
  en.Community.Dell.com/.../20503380

  .. which brings me here: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=21129

  Download the latest version of the host controller, Intel, install it (unzip & run setup.exe), reboot and your problems will be solved...!

  See you soon!