Installation of the EBS for the use of 5-10 years

Similar Questions

• Installation of network infrastructure for CARS using UDEV fail

  Hi experts,
  
  I want to install the RAC for the test using UDEV, VirtualBox and Linux 64 bit 5.8.
  I can't installing grid Infrastructure (ASM). In step 5 of 9 - create ASM, Setup disk group displayed not all disks to create ASM diskgroup.
  I think UDEV have been configed properly. Here is the configuration of UDEV:
  
  ' / etc/scsi_id.config '

  = 'ATA' salesman, options-p = 0x80
  options = g

  "/ etc/udev/rules.d/99-oracle-asmdevices.rules"

  KERNEL == "sd? 1 ", BUS is"scsi", PROGRAM is" / sbin/scsi_id-g-u s/block / $ parent ", RESULT is 'SATA_VBOX_HARDDISK_VBb1141d78-3196a201_', NAME ="asm-disk1", OWNER = 'oracle', GROUP is"dba", MODE ="0660 ".
  KERNEL is "sd? 1"BUS is"scsi", PROGRAM is" / sbin/scsi_id-g-u s/block / $ parent ", RESULT is 'SATA_VBOX_HARDDISK_VB748d0eea-d6385be2_', NAME ="asm-disk2", OWNER = 'oracle', GROUP is"dba", MODE ="0660"

  ls-al/dev/asm-disc *

  brw - rw - 1 oracle dba 8, 17 Mar 30 21:44 / dev/asm-disk1
  BRW - rw - 1 oracle dba 8: 33 Mar 30 21:44 / dev/asm-disk2

  any sugestion for me? Help, please...
  
  Thank you and best regards,
  Hai may.

  Try this one.

  1. find the WWID of the disc
  # / sbin/scsi_id-g-u s/block/sdb
  SATA_VBOX_HARDDISK_VBbb8af1a8-4d4db09b_ here, we got a WWID of "SATA_VBOX_HARDDISK_VBbb8af1a8-4d4db09b_".

  2. create a custom rule of UDEV
  Create a new rule in etc/udev/rules.d/, for example, etc/udev/rules.d/99-oracle.rules.
  Ensure that the lists of file after file of 50 name - default xxx.rules. The file name must end with '.rules' to be recognized.

  KERNEL == "sd * 1", BUS == "scsi", PROGRAM is "/ sbin/scsi_id-g u s /block/%P", RESULT == "SATA_VBOX_HARDDISK_VBbb8af1a8-4d4db09b_", RUN += "/ bin/raw/dev/raw/raw1 %N" "
  KERNEL == "sd * 2", BUS == "scsi", PROGRAM is "/ sbin/scsi_id-g u s /block/%P", RESULT == "SATA_VBOX_HARDDISK_VBbb8af1a8-4d4db09b_", RUN += "/ bin/raw/dev/raw/raw2 %N" "
  KERNEL == "sd * 3", BUS is "scsi", PROGRAM is "/ sbin/scsi_id-g u s /block/%P", RESULT == "SATA_VBOX_HARDDISK_VBbb8af1a8-4d4db09b_", RUN += "/ bin/raw/dev/raw/raw3 %N" "
  ACTION == "add" KERNEL == "" raw * ", OWNER = 'oracle', GROUP is"oinstall", MODE ="0664"the OUTCOME filed was the WWID of your hard drive found in step 1."

  Please also subsititue 'OWNER', 'GROUP' and 'MODE' value to the real.

  3. restart UDEV service
  # / sbin/start_udev and then you are free to use/dev/raw/raw1 and/dev/raw/raw2/dev/raw/raw3 as your RAC OCR and voting devices.

  Thank you
  Kods

• Installation of the minimum runtime for the program using the driver USB of NI-VISA personal

  I have a LabVIEW 2009 application that uses a driver for a USB device, created using the wizard of the Driver NI-VISA.  What my minimum installation of runtime needed to understand when I move it on a non-development machine?

  On my dev machine, I went to MAX and given my new camera USB one alias of VISA.  I think I'll meet trouble if my deployment includes no MAX on TIME machine.

  Right now, I guess the minimum is LabVIEW 2009 DURATION, NOR-DAQmx Configuration (including MAX) execution, duration of NI-VISA.

  If not, is there a method that avoids having to configure an alias altogether?  It would be nice to not not need NOR-DAQmx, I use not any material that my USB device with driver custom.

  Thank you!

  Not sure why you consider same installation DAQmx. You can install just MAX, the VISA duration and your harware MAX configuration. The installerallows of LabVIEW allows you to export the configuration, and then you select the option to import on the deployment computer. You will also need to include the installation of the inf file you created with the wizard.

• Lost the disk for Installation of Windows Vista - can I use my friends with my product key?

  I am running Windows Vista on my computer at home, but I had this for a few years, and he began to have very slow, so I decided to completely erase the hard drive, now I know how to do this, but I need to re - install the OS when I'm done, but I've lost my Windows Vista installation CD , even though I still have my code/product key - it would be OK to use my drive of Windows Vista to friends with my product code?

  I tried this article: http://support.microsoft.com/default.aspx/kb/326246and he do not seem to answer my question - I'm trying to replace my copy, I just want to know if it is OK to use my friends?

  Yes.

  As long as it's a DVD from Microsoft and not a computer Manufacturer'e Recovery DVD.

  Read the information below.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• New installation of Windows 7 Ultimate, computer loops and again: "the installation program prepares your computer for first use.

  I'm running Windows 7 Ultimate on my Toshiba Tecra A4-S211 and provided that the installation went, it seemed that took place without incident; except that when I try to start windows I see: "Starting windows" followed by "Setup prepares your computer for first use" that is displayed for about 3-5 seconds and then it restarts and displays abruptly: "cannot start Windows. A recent hardware or software change might be the cause. "I tried the safe mode, but also"last known good configuration"and I get the same results. Finally, I tried the repair function on the installation disc and says am Startup Repair is unable to repair the computer automatically, where then I click to send information to Microsoft to be told that if I had all the devices attached like a camera or portable music player to remove them and restart. I have nothing set, no flash player or anything.
  I tried to do all the steps above a dozen times each, and the results are consistent, except that the start of repair is sometimes said that there is nothing wrong with windows. Here also to point out that I had XP running on it before without problem and I tested the DVD on another computer and it worked.

  Hi Austin,.

  You can try some of them in Mode safe - tap F8 repeatedly that you start.

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Also from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  Retry After Chkdsk startup repair.

  If after those you can try the system restore to fashion without failure or the valuation or Windows 7
  disc.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------------------------------------------------------------

  If you need to repair disks - these help repair Windows not re-install.

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ======================================

  If necessary:

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  Follow the steps in this link as well.

  http://support.Microsoft.com/kb/2674065#Method2

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/Windows-failed-to-Starta-recent-hardware-or/8dad59b9-A08D-4cb8-8ddf-1c164b7caf65

• I bought my free membership of creative cloud and installation of office for the use of the Institution. But accidentally uninstalled and deleted the program files. Now I can't update my apps and have to pay for the installation of creative cloud

  I bought my free membership of creative cloud and installation of office for the use of the Institution. But accidentally uninstalled and deleted the program files. Now I can't update my apps and will pay for the installation of creative cloud. What should I do?

  Reinstall the cc desktop application, https://creative.adobe.com/products/creative-cloud

• Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also used faster then the previous version.

  Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also faster, then the previous version, use 6s with 64 GB

  Hello naqvi65,

  I see that you have several problems with your iPhone after updating to the latest version of iOS. These issues include problems of performance, inability to find contacts at a Spotlight search, problems with enforcement camera freeze after the launch and the battery discharge more quickly than what you are accustomed. I want to help you find a solution for these questions!

  To answer your questions with performance and your inability to find contacts, we will try to restart your iPhone first to see if the problems persist. Take a look at this resource for more information:

  Restart your iPhone, iPad or iPod touch - Apple Support

  Take a look at this Web site using your photo app troubleshooting:
  Get help with the camera on your iPhone, iPad or iPod touch - Apple Support

  To keep an eye on your battery use, take a look at the information here:
  On the use of the battery on your iPhone, iPad and iPod touch - Apple Support

  To help maximize your battery performance, this site has some good tips for iOS devices:
  Batteries - maximize Performance - Apple

  See you soon!

• Satellite L50 - A - 1 7 hangs for a while - HDD Displays the use of 50%

  Using my laptop for a while, my laptop freezes and when the Task Manager is open my HARD drive is on the use of 50% but nothing is using it.

  After a while my laptop works very well
  https://www.dropbox.com/s/0c7g85btwvbse19/foto%2019-10-14%2014%2024%2028.jpg?DL=0

  I think it would be possible that some of the processes that are running in the background can lock the HARD drive and so the system would be unavailable for a while.

  Since when did you notice this gel?
  Maybe after some 3rd party software installation, updates, etc.. ?

  I think it will be easy to tell what's wrong here without particular control
  I think that you should pay attention to the software that runs while the laptop freezes.

  But let's not forget that a possible HARD drive failure could be the reason why the system hangs.

• DeskJet 1510 all-in-One: the installation of the software has failed after the USB connection and remain unfinihed. Work for printer and Scanner

  My PC Dell XPS401L has been updated to Win 7 Win 10.  Then, the HP DJ1510_188 software has been installed.

  The task was ok until the bond required of the Dekjet to the USB port.

  Heard the noise of the acknowledgement of receipt, but there screen remains unchanged despite I wait several minutes. So the installation remains unfinished. However, the printer and scanner are both of the device but are not available important "Solution Center" screen.  I already have the solutions of the error indicated by HP support withot success.

  The system indicates that the problems appear in the USBsetup.exe

  Can someone help on this subject?

  Horacio

  Hi @Horacio_B,

  Thanks for joining the Forums of HP Support for a solution to your installation problem.

  I understand that you try to use an all-in-one printer HP Deskjet 1510 with a PC that has been upgraded from Windows 7 to Windows 10 but does not complete the installation of the USB and the HP Solution Center is not available. I would like to help.

  I would like to start by disconnecting the USB cable and uninstall all software related to printers. Here is a support document which can be used if necessary reference - uninstalling the software of the printer (Windows).

  Once it's over try to use the HP printer installation wizard for installation. This tool will get the software and installation help.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• How to set up a personalized message for the prevention of the installation of the software via group policy in windows server 2012

  Hello

  I would like to know how to set up a personalized message for the prevention of the installation of the software via group policy in windows server 2012 R2.

  I released some software in my field to a distribution point and I of installation for few of them software restriction policies. But I don't want the default next message below:

  "The system administrator has set policies to prevent this installation." This installation is forbidden by system policy. Contact your system administrator. »

  Instead, I would like to set up a custom message. Please tell us how can I do same by using Group Policy, if not available, what are the alternatives that I can use.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• not able to install the driver mx NIDAQ (for the use of USB-6008) in my laptop, NIDAQ902f0? any solution...

  I am not able to install driver of mx NIDAQ (for the use of USB-6008) in my laptop,... well NIDAQ902f0 want to give any suggestion...

  Following message comes when I run the Setup... (installation program downloaded from the website OR..)

  Runtime error:

  This application has requested to terminate in an unusual way.

  Please contact the application support is more information.

  Title of the dialog box is "Microsoft Visual C++ runtime library"

  Is the same when NIDAQmx 7.5 is tried to install from the CD that came with the USB-6008.

  Double post

• I opened the game client for life despite the installation of the game has stopped working properly and the game closes that I said?

  I opened the game client for life despite the installation of the game stopped correctly and the game closes that I said?

  Hello

  What operating system do you use?

  I suggest you to follow the links and check out them.

  Method 1:

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

  Method 2:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• installation of the SATA for XP 8560p

  I have a 8560 with Windows 7 installed. I want to replace the drive (same type of SATA drive) with one another and install XP Pro.

  I read the posts earlier say collect information of the Windows 7 install and I should be able to change the Bios IDE mode, install XP without using the F6 driver load and install the drivers after installing XP. I don't have a USB floppy drive so I thought I might be able to use a USB but the F6 prompt is looking for a drive A: and he doesn't so I went with the installation of the SATA drivers after installing XP.

  In WIndows 7 Device manager it says the ide ata/atapi controller's (R) Mobile Express Chipset Sata ahci controller.

  With BIOS change IDE, I was able to install XP Pro SP2.

  The drive is detected as F: drive for some reason any.

  I installed SP3 service pack. I also installed various HP drivers for networking, display etc.

  When I go into the Device Manager it shows ide ata/atapi-controller.

  6 Intel series/C200 Series Chipset Family 2 Serial ATA Storage Controller - 1 09 port

  6 Intel series/C200 Series Chipset Family 4 Serial ATA Storage Controller - 1 01 port

  It only shows the R) Mobile Express Chipset Sata ahci controller.

  If I reboot and change the SATA BIOS I get a blue screen on startup of XP to load. Can only run as IDE.

  Don't know where to go from here.

  Someone help?

  Paul_Tikkanen wrote:

  Hello:

  This is the first:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5056949&prodNameId=5056950&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=ob-104280-1

  It's this one:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5056949&prodNameId=5056950&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=ob-78959-2

  Paul

  Thank you Paul,.

  The first will be not install because, guess what, he automatically wants to install in C: (no choice) which I did not. So there is a reason to reinstall.

  Second, it worked very well.

  Thanks for your help!

  Jeff

• Upgrade Vista to Windows 7 error: "Windows cannot copy files required for installation. The files may be damaged or missing. Error Code Ox80070017.

  I am upgrading of Windows Vista Home Premium (32-bit) for Windows 7 Home Premium (32 bit) - but getting stopped everytime I try, I end up with a dialog box stating: "Windows cannot copy files required for installation. The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation. Error Code Ox80070017.

  What should I do to resolve this problem and allow full of Windows 7 installation? (my computer is a Compaq Presario V6000).

  Hello

  What installation media you are using?

  Method 1:

  Error 0 x 80070017 translates "CRC error" which means that the files that are copied from the disc are not making it to the hard drive with the same structure, which means that the 'original' the disk files are modified/changed/corrupted while being copied to the location of the 'destination' on your disk during Setup.

  This usually means a bad DVD, or an error reading on the DVD player.

  I suggest you follow the link and check.

  Upgrade Windows Vista to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7?T1=tab02

  Method 2:

  Temporarily disable the antivirus on the computer running software and check if you are able to install the software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  WARNING: There may be loss of data through an analysis using firewall to eliminate the virus as appropriate

  Method 3:

  I also suggest you to follow the link and check.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• Windows cannot copy files required for installation. The files may be damaged or missing. Error code: 0 x 80070241.

  I had a lot of trouble trying to install the 64-bit version of windows 7 Home Premium on my 64-bit vista, and my question is multi-part. If it is relevant, it's my 2nd copy of windows 7 I have tried. Initially, I had the problem of not being able to run the installation on two copies with the error "'autorun.dll' could not be found or is damaged. Error code is [0x7E]. "However, I managed to get into with my 2nd copy installation after restarting my computer. Once in Setup, I got another error that stopped the installation that says "windows not could create an installation folder. Error code is 0 x 80070017. "Again, I rebooted my computer and started the installation again, this time following installation was decently through but stopped when I got the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. "I then backed up and restarted my computer and then tried to use the option to install custom but then got the error"E:\sources\autorun.dll is not designed to run on windows or it contains an error. Try to install the program using the original media, or contact your system administrator. "coupled with the error"the file 'autorun.dll' could not be loaded or is corrupt. Error code is 0xC1"again once I restarted and tried the custom option but got the error" Windows has no load the required file WinSetup.dll.» The file is possibly corrupted. To install windows, restart the installation. Error code is 0x3E6. "I restarted my computer and tried the custom triple option more and still have the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. »

  I understand that my problem is very complex, but it seems to be built around a missing or damaged file. Thanks if you can tell what's wrong or what to do.

  Tips for solving common problems when Windows 7 won't install troubleshooting

  1. start Windows Upgrade Advisor to see if there are known issues that might affect the installation and correct them.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  2 disable any security software, including anti-virus programs and firewalls.
  3 make sure that your computer has the BIOS and latest drivers.
  4. disconnect all external devices except the keyboard and mouse before installing.
  5. If your computer/motherboard integrated video use and remove the dedicated video card.
  6. If you have a large amount of RAM (memory), try to reduce the amount of RAM installed. 1 GB if 32-bit installation, 2 GB for 64-bit, then replace RAM if the upgrade was successful.
  7. If you have downloaded Windows 7 and it burned a DVD test burn again at the slowest speed possible. It is also possible the download may have errors, you can try to download it again.

  8. check your RAM (memory) to find errors. This can take some time.
  (A) Insert the Windows 7 DVD and restart the computer.
  (B) start from the Windows 7 DVD.
  (C) select your language, and then click Next.
  (D) click on "repair your computer" then select the operating system to fix it.
  (E) click on the link of the Memory Diagnostics in the system recovery menu.
  (F) the computer will restart and your memory is checked for errors.

  9 turn off startup programs:
  (A). Click Start, type MSCONFIG in the search box and press ENTER.
  OK the authorization of user account control and password if necessary
  If you are using XP: click Start, run, and type: MSCONFIG and click OK.
  (B) on the general tab, click Selective startup.
  (C) just below the selective startup, clear the checkbox "Load Startup items".
  (D) click the Services tab, check "Hide all Microsoft Services", and then click Disable all.
  (E) click OK, and then restart the computer.
  (F) try the upgrade again.

  (NOTE: If the upgrade fails and you continue to use your rear security software, then also go back into MSCONFIG and under the general Tower XP/Vista tab, click "Normal startup", and then click OK to exit.)

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses