Replace the HHD Pavilion m7 with SSD boot drive

Similar Questions

• replaced HDD on Pavilion dv9618ca with different HARD drive. laptop now fails at first to the top

  I replaced the hard drive (750 GB WD) in my HP Pavilion with the 750 GB toshiba brand AF different and portable model with win7 os. Now, the computer fails to start, it looks and sounds as if it will work; happens to windows and don't stop giving me the error that starts the repair is necessary. I tried several times to use the installation disk I bought fromwindows however nothing helps. I did smart test, diagnosis and tried to restore / repair with the help of HP. I don't know what to do.

  Yes, but you may also be able to format it by starting on a Windows install disc/USB drive and then choosing the option to format the drive during installation.

• Replace the HDD with SSD boot disk and use the disk HARD now as secondary storage

  I would like to replace my dv7 - 6143cl HDD with a SSD boot drive and using the OEM HARD drive as secondary storage.

  I have the SSD and the caddy

  I need to:

  delete the original OEM HD

  Install the SSD

  install OEM HARD drive in secondary Bay

  Install Win 7 (I don't have install disks - what is on the HARD drive in his backup partition)

  or I have to

  delete this HD

  Install the SSD

  go into the BIOS, and then assign him drive in AHCI (etc.)

  Install Win 7

  install OEM HARD drive in secondary Bay

  etc.

  I want to dual-boot, if possible, but I think that the second HD (start-up disk) does not start, even if I change the settings in the BIOS

  is this true?

  Pavilion dv7 - 6143cl

  I7

  8Gb

  Win7 (64)

  Thank you very much

  Hello:

  Your BIOS is set to AHCI (or RAID) by default. It cannot be changed.  Look in your device manager and in the IDE ATA/ATAPI controllers section, look to see if there is a controller SATA ACHI he.

  If so, you have an AHCI BIOS default.

  If you go further down the line in Device Manager and see a section of storage controllers, click on that, you would see a SATA RAID controller and your BIOS is set to default RAID.

  I don't have your model laptop so I don't know if HP has implemented some models double disk RAID or AHCI.

  So... First, copy your original C:\ drive SWSetup folder and save that to a portable hard drive. That must contain all the files installation for the drivers and the software provided with your PC. You can search this folder for programs that you may want to reinstall after your new SSD drive HARD primary.

  To install W7 on your SSD, check your own install of W7 disc.  Here's how:

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Can't answer your question on the dual boot as I never did before.

  Paul

• I have elements 9 Prime Minister, now have the new macbook pro with no disk drive, can I download the software?

  I have elements 9 Prime Minister. I now have the new macbook pro with no disk drive. can I download the software on the net, carry serial numbers?

  Hi Annie p.

  Please use the link below to download first elements 9

  http://prodesigntools.com/Photoshop-elements-9-premiere-elements-9-direct-download-links.h tml

  Please be sure to complete the section very important before you click on the download link.

  Thank you

• replace drive hard hp pavilion 6500 with ssd

  Hi again

  can I replace my hp pavilion 6500 hard drive

  Samsung 850 EVO 500 GB 2.5 inch SATA III internal SSD?

  will it work?

  the speed difference is noticeable?

  Thank you

  A.S.

  Video:

  https://www.YouTube.com/watch?v=r6My78EPtkE

  Repair manuals

  See p. 51. Do you have a recovery disk or other means to reinstall Windows on the SSD drive?

  What is the size of the hard drive and SSD is what size you're goling install?

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Is it a good idea to replace the 2.5 "HDD (with partition recovery inside) with a SSD?

  Hi all

  I have a ThinkPad E420 with the recovery partition in the HARD drive. I intend to sell the excessive 750 GB 5400 RPM HARD drive and replace it with a 120 GB SSD, because I need responsiveness instead of ability. Is this a good idea?

  Thanks in advance.

  Best regards

  Haris

  Lenovo: 'as sensor airbag, Active Protection System can detect sudden changes in motion and temporarily stop the hard drive to help protect your valuable data against certain accidents that might happen because of cell phone accidents every day."

  This tool is designed to protect not the mechanics of the SSDS. It would not apply in your case.

• Desktop HP ENVY Phoenix 860VX: how to replace ssd boot drive in a desktop HP ENVY Phoenix 860VX?

  I bought a desktop computer HP ENVY Phoenix 860VX with an SSD of 256 GB of disk as a boot disk with a disk of 1 TB storage.  I have a Samsung Evo Pro 500 GB SSD I want to use as the startup disk.  I cloned the original drive to the Samsung Evo without problem.  I opened the PC folder to move hard disks, and I can't find the SSD drive.  I found the pretty easy storage of 1 TB drive but cannot find the SSD drive.  Can anyone help?

  Greetings,

  You can have a PCIe M.2 (Non - SED) Solid State Drive 256Go.

  This drive connects to the motherboard, it's the size of a stick of gum.

  It can be mounted vertically or stand flat on the motherboard (MB).

  M2 the drive is much faster than an SATA 3 SSD.  You may not be happy with this change if you bought a SATA 3 SSD. You might be better off going to a 512 GB m2 if the MB supports. I noticed that the m2 drive runs closer to the rated speed when using a k i7 - 5930 or an i7-5960 x due to the track of 40 PCIe bus as opposed to 28 tracks on the i7-5820 k.

  It should be close to the PCIe slots. ASRock, Asus and Gigabyte locate M.2 slots here as it connects with the bus PCIe x 16 and uses the bandwidth of one of the 16 slots x.

  If this is true, install the SATA SSD in the available Bay HHD using an adapter 2.5 inches. Then change the default boot device in the BIOS for the SATA SSD. You may need to experiment on what SATA port you use. EFI can be finicky. It is also possible that you may have to reinstall the original image. I have an Asrock x 99 card in m.2. Asrock BIOS is much more forgiving and configurable. I'm not familiar with MB of your PC or the boot configuration options available during the passage of a m2 boot device to a boot SATA device.

  This change of equipment could also ruin to restore the PC using the original image. It depends on whether this change of equipment is a configurable option to purchase.

  See you soon!

• HP Pavilion 17-e186nr: SSD HARD drive and optical drive with HDD switch

  I have a
  HP Pavilion 17-computer e186nr laptop running Windows 8.1
  Product model: http://support.hp.com/nz-en/product/HP-Pavilion-17-e100-Notebook-PC-series/5401229/model/6617177/pro...

  Processor: AMD A10 - 5750 M APU with graphics Radeon (TM) HD

  CD-ROM: hp DVD a Beltway. DU8A5SH SATA CdRom

  I have 2 questions about my laptop which I couldn't find answers to on the HP product model page or the Device Manager in Windows

  1 > I know it's still backward compatible for best performance on my SSD, I want to know if my laptop supports SATA III - 600 GB/s of speed?

  2 > I buy a caddy optical Bay for my current 2.5 "SATA HDD, what is the size of the optical drive on my laptop (12.3 or 9.5) mm?

  @Neoplasm

  Hello

  To answer our questions:

  (1) the laptop must support SATA III 6 Gb/s transfer rate.

  (2) it is not made on the replacement of the optical drive with a HARD drive dad. Where this caddy is available from?

• How do you get and replace the hp pavilion 3CR3050D6K LCD flat screen 20-b010

  Pavilion 20-B010 screen has been damaged and is cracked. I would like to get a replacement manual or instructions on execution of Assembly and disassembly.

  Hello @VB_Richard,

  I understand that you need to replace the LCD screen on your desktop HP Pavilion 20 - b010 all-in-One PC and you would like a manual or instructions on how to perform the installation.  The number of product of the screen, you'll need is 652255-001, which is the 20 "TN N-glare W - LED Non - ZBD Sam 250nits. With regard to the steps needed to install it I am you provide those below:

  Before you begin: remove the back cover and bezel.

  Removal of LCD Panel Kit

  1. place the entire middle frame on a smooth flat surface.

  

  2 detach the connector from the LCD backlight to the LCD.

  

  3. remove the four screws that attach the LCD Panel to the Central frame - the screws will be on the high or low or the sides of the Board according to the manufacturer of Panel. Each manufacturer will have its own stencils for the location of the screw holes.

  

  4. partially lift the bottom of the middle frame off the LCD screen.

  

  5. unplug the LVDS cable from the Control Panel before completely up the average frame off the LCD screen.

  

  Replacement LCD Panel Kit

  1. to install a new LCD Panel, align the top of the middle frame on the LCD Panel.

  

  2. connect the LVDS cable to the LCD screen.

  

  3. lower the average frame completely on the LCD screen.

  

  4. replace the four screws on the sides or the top and bottom of the Panel to fix the Panel on the Central frame. Use the location of the screws to the stencil for the manufacturer of the Panel that you are installing.

  

  5. replace the backlight of the LCD screen connector.

  

  If the new LCD Panel comes from a different manufacturer that the old LCD Panel, remove old backlight converter card connector and install the new connector on the card. The jury has stencils indicating the location of the connector backlight by manufacturer.  Configure the jumpers on the card of converter to match the Panel manufacturers. Painted stencil on the chassis of the Middle table configuration of rider by the manufacturer.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• Replace the HP Pavilion dv6-6060ep WLAN module

  Hello

  I have a small problem, maybe someone could help me.

  So, I have Pavilion dv6-6060ep and I buyed a new module, a Mini PCI - E Wireless WiFi + Bluetooth 3.0 RT3090BC4 IEEE 802.11b/g/n card to replace the original, and this module is not supported by my BIOS.

  I checked the file below, and I think that the info is for my laptop and my WLAN module is in the list.

  File: Info PDF

  Any advice/suggestions?

  Thank you!

  Dubaku wrote:

  Hello

  I have a small problem, maybe someone could help me.

  So, I have Pavilion dv6-6060ep and I buyed a new module, a Mini PCI - E Wireless WiFi + Bluetooth 3.0 RT3090BC4 IEEE 802.11b/g/n card to replace the original, and this module is not supported by my BIOS.

  I checked the file below, and I think that the info is for my laptop and my WLAN module is in the list.

  File: Info PDF

  Any advice/suggestions?

  Thank you!

  Hello

  Yes, the map is on the list but need a spare part HP with the right part number: 630705-001. Means that you need to buy a wifi with this part or any other wifi number in the list, but always use the part numbers.

• Replace the screen for one with a higher resolution on Satellite P850-12Z

  Hi all

  I read a lot on the internet about the replacement of the screen on computers laptop toshiba and also I saw a video on [how to replace the screen for a Toshiba Satellite P855 | http://www.youtube.com/watch?v=Ncz3ZaI2I-s].

  Is it possible to replace the screen for a Toshiba Satellite P850 12Z (original: 15.6"@1366x768) to another screen with a higher resolution (say: 15.6"@1920x1080 or 15.6"@1600x900)?

  I'm sure that the graphics card is able to function perfectly with this screen (nVidia GeForce GT630M 2048 MB dedicated) and also I read a lot on laptop screen replacement, and I know that this screen has a connector 40 pin and it is an LED Panel, so I won't have to worry about the ups.

  I found several screens (15.6"@1920x1080) who say they are compatible with Toshiba, but I wan't to make sure a higher resolution Panel replacement is possible.

  Thank you in advance.

  Hello

  Exchange of the display is not supported by Toshiba, so I don't think that someone here can help you with this.
  I assume that Toshiba offers multiple views for this model of laptop. Only seller is different but resolution 1366 x 768 is always the same as on the original laptop specification.

  You can try to contact the nearest Toshiba service provider and ask for help. If someone can help you with that service of Toshiba. They have access to the database of Toshiba and can possibly tell if another view is usable on your machine.

  All this is quite complicated.

• Replace the chip AMD A8 with an AMD A10

  HI, I was wondering if anyone had any suggestions on this.  I have a HP: 500-054 with an AMD A8 chip, I want to upgrade an A10.  Power and watts on socket are very good A10 uses the same power and is located in the path of upgrade for the Council of Eric on the 054.

  My problem is that it looks like the factory used a thermal GLUE, instead of a paste.  When I opened the hood and went to remove the fan screws were already in bulk.  Unscrew more just to be sure and tried to remove the fan so I could replace the chip. I checked and recheck and nothing else is holds the fan.

  So any suggestions on getting the fan assemble the CPU socket without damaging the motherboard?  He is stuck in solid and hoped that someone here would have a suggestion.

  I'm not particularly intelligent or gifted. I'm just very, very curious.
  Albert Einstein

  Thanks for the reply, I was upgrade the system to pull the max memory and put it into the higher A-series chip. A problem with the fan by pulling even after be unscrewed it wasn't pulling up if I could have access to the chip.

  Regardless of the factory used as a thermal paste should be defined as super glue.  Shouldn't not concerned by the old A8 chip I replaced it anyway, so I unplugged the fan and run the PC for 15 minutes on a game with the unscrewed and disconnected fan.  Not something that I would normally do, but this has worked to build-up of heat allowed me to wiggle the fan a little and she appeared off the coast.

  Thanks for your reply, the problem is resolved and the new chip Assembly and fan of the A10 is installed and works very well.  Note the A8 chip works well so I tested it on another PC so overheating does no damage.

• Replaced the G550 motherboard. Won't boot black screen and high.

  I replaced the motherboard in my Lenovo G550 laptop cause the old one was fried. It's the exact same model of the motherboard with a new processor. I carefully put it back together and double checked all the connections. Now when I turn it on, it made all the right noises, I hear the fan and hard drive starts, but after 2-3 seconds, the HARD drive and fan go quiet and the hard drive light turns off. The laptop stays just slowed after this point and the screen is completely black, no display at all. Any help much appreciated.

  Thank you

  THE FIXED! .. After leaving the laptop running for about five minutes, I noticed that the right part of the palmrest botton was really hot. That's where the USB slot Council separte connected to the motherboard. So I opened the laptop again once disconnected the cable flex of the USB card, turned on again and it starts without any problem. Everything works perfect now just need to find a replacement USB Board now on this side. Can't believe that the USB Board was causing the problem.

• replacing the trackpad in 440p with trackpad + track buttons (or keys only) ThinkPad 430

  does anyone know if it is possible to replace the new trackpad without physical buttons on thinkpad 440p with the trackpad + buttons or buttons only (I don't like on the touch button functions)?

  It would be the best final solution to the misconception of the 440p trackpad. !!!

  Thank you

  Piotr

  # It is not possible.

• Can I replace the motherboard on w510 with

  Hello

  Can I replace motherboard 63Y1495 with 63Y1540 or 63Y1542. It is a w510.

  Recantly, I bought an old w510. The portable freezer randomly and never recoveres. It has been repaired for this before and worked fine for a while. There is no problem, but the motherboard video

  What is your advice? Can I replace the motherboard? Is it a long way? Or is it better to find another laptop?

  According to my notes, 63y1545 is a T510 Board with integrated graphics (Intel). The other 2 boards are W510 boards. They are all the same size and shape, but W510 boards have 4 memory slots and use a different cooling fan. The W510 is a nice machine and worth it if you can get a good price on a Board and fan of fixing. Basic coverage is also different machines 'W', but I don't know if it's important or one you have now.