Installation of the UCR - where to put tablespaces components?

Dear Sir

For the UCR facility in 11.1.1.6 for those on a hundred of tablespaces is a configuration file where you can specify what directory structure you will install all those on a 100 storage space before you run the installation process?

Thank you

Anatoliy

Please see-

http://docs.Oracle.com/CD/E23943_01/doc.1111/e14259/toc.htm

Kind regards
Anuj

Tags: Fusion Middleware

Similar Questions

  • trace on the procedure, where to put ALTER?

    Hello
    I'm trying to run a trace for SP, if do not know where I should put < ALTER SESSION SET SQL_TRACE = TRUE >, can I do this as below with immediate execution?
    Probably I'm still missing the definition of session for Oracle, is not clear to me if I don't have PS this window it will be less the same session?
    Later, I check file in Udump?

    And I defentely want to limit my trace min, as for the session only, tank can if applied for a given sp perform.

    Help you enjoy.

    DECLARE CHECK_DATE DATE;
    BEGIN
    Run immediately "ALTER SESSION SET SQL_TRACE = TRUE"; --//*********???
    CHECK_DATE: = 17-seven.-10';
    MYRYBA. SP_USE01 (CHECK_DATE = > CHECK_DATE);
    Run immediately "ALTER SESSION SET SQL_TRACE = false';"
    DBMS_OUTPUT. PUT_LINE ('SP_USE01 ENDS...) ');
    END;

    Or I should put this line in the actual procedure?



    TX
    Tre

    Manage: trento
    Status level: Beginner
    Join date: April 5, 2010
    Messages total: 113
    Total Questions: 48 (28 pending)
    so many issues with so few answers.
    :-(

    If "NO" how to transform the given trace SP?

    has asked & answered above.

  • Installation of the UCR switches from Oracle database 11g

    UCR-6083: impossible - check requirement prerequisites for the selected item: SOAINFRA
    Refer to the journal of the RCUS to D:\SOA1114\rcuHome\rcu\log\logdir.2011-04-05_12-12\rcu.log for more details.
    RCU - 6107:DB prerequisites for Init Param failed: process
    Current value is 40. It must be greater than or equal to 200.

    RCU - 6092:Component validation selection failed. Please refer to connect to D:\SOA1114\rcuHome\rcu\log\logdir.2011-04-05_12-12\rcu.log for more details.

    during the selection of the components, I selected soa infrastructure and I continued. but she stopped when checking for prerequisites.
    pls find my file rcu.log as below.

    --------------------------------------------------------------------------------------------------------------------
    2011-04-05 12:12:11.694 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: dir Log is not exist. Creation logdir:D:\SOA1114\rcuHome\/rcu/log\logdir.2011-04-05_12-12
    2011-04-05 12:12:11.704 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: Log file does not exist. Creation of journal file:D:\SOA1114\rcuHome\/rcu/log\logdir.2011-04-05_12-12\rcu.log
    2011-04-05 12:12:11.704 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: LOG_LEVEL_IS - NOTIFICATION: 1
    2011-04-05 12:12:11.704 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: hostname: PC161826
    2011-04-05 12:12:11.704 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: OSINFO: x 86 Windows 7 6.1
    2011-04-05 12:12:11.714 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: JREINFO: 1.6.0_21 D:\SOA1114\rcuHome\jdk\jre
    2011-04-05 12:12:11.714 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: username: 249141
    2011-04-05 12:12:11.714 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: USERDIR: D:\SOA1114\rcuHome\BIN
    2011-04-05 12:12:11.714 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: user country: U.S.
    2011-04-05 12:12:11.714 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: the user's language: en
    2011-04-05 12:12:11.714 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: Java class path: D:\SOA1114\rcuHome\\jlib\rcu.jar;D:\SOA1114\rcuHome\\jlib\share.jar;D:\SOA1114\rcuHome\\jlib\help-share.jar;D:\SOA1114\rcuHome\\jlib\ohj.jar;D:\SOA1114\rcuHome\\jlib\orai18n-mapping.jar;D:\SOA1114\rcuHome\\lib\xmlparserv2.jar;D:\SOA1114\rcuHome\\jdbc\lib\ojdbc5.jar;D:\SOA1114\rcuHome\\jdbc\lib\ojdbc14.jar;D:\SOA1114\rcuHome\\jlib\jewt4.jar;D:\SOA1114\rcuHome\\jlib\ojdl.jar;D:\SOA1114\rcuHome\\modules\oracle.odl_11.1.1\ojdl.jar;D:\SOA1114\rcuHome\\jlib\SchemaVersion.jar;D:\SOA1114\rcuHome\\jlib\wldb2.jar;D:\SOA1114\rcuHome\\jlib\wlsqlserver.jar;D:\SOA1114\rcuHome\\jlib\wlbase.jar;D:\SOA1114\rcuHome\\jlib\wlutil.jar;D:\SOA1114\rcuHome\\ jlib\fmwgenerictoken.jar;D:\SOA1114\rcuHome\\jlib\com.bea.core.weblogic.workmanager_1.9.0.0.jar;D:\SOA1114\rcuHome\\jlib\oracle_ice.jar;D:\SOA1114\rcuHome\\jlib\rcuhelppages.jar;D:\SOA1114\rcuHome\\assistants\opca\jlib\opca.jar;D:\SOA1114\rcuHome\\portal\jlib\ptlshare.jar;D:\SOA1114\rcuHome\\jlib\ldapjclnt11.jar;D:\SOA1114\rcuHome\\jlib\commons-collections-3.1.jar;D:\SOA1114\rcuHome\\jlib\commons-dbcp-1.2.1.jar;D:\SOA1114\rcuHome\\jlib\commons-logging.jar;D:\SOA1114\rcuHome\\jlib\commons-pool-1.2.jar;D:\SOA1114\rcuHome\\jlib\quartz-1.6.0.jar;D:\SOA1114\rcuHome\\jlib\xml.jar;D:\SOA1114\rcuHome\\jlib\jta.jar;D:\SOA1114\rcuHome\\jlib\iam-platform-utils.jar;D:\SOA1114\rcuHome\\jlib\iam-platform-authz-service.jar;D:\SOA1114\rcuHome\\jlib\iam-features-identity.zip;D:\SOA1114\rcuHome\\jlib\ iam-features-configservice.zip;D:\SOA1114\rcuHome\\jlib\jps-api.jar;D:\SOA1114\rcuHome\\jlib\jps-common.jar;D:\SOA1114\rcuHome\\jlib\jps-ee.jar;D:\SOA1114\rcuHome\\jlib\jps-internal.jar;D:\SOA1114\rcuHome\\jlib\jps-manifest.jar;D:\SOA1114\rcuHome\\jlib\MicroSM.jar;D:\SOA1114\rcuHome\\jlib\javax.persistence_1.0.0.0_1-0-2.jar;D:\SOA1114\rcuHome\\jlib\org.eclipse.persistence_1.0.0.0_1-1-0.jar;D:\SOA1114\rcuHome\\jlib\identitystore.jar;D:\SOA1114\rcuHome\\jlib\jps-unsupported-api.jar;D:\SOA1114\rcuHome\\jlib\pd-internal.jar
    2011-04-05 12:12:11.714 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: Java library path: D:\SOA1114\rcuHome\jdk\jre\bin; ; C:\Windows\Sun\Java\bin; C:\Windows\System32; C:\Windows;D:\SOA1114\rcuHome\\bin; C:\oraclexe\app\oracle\product\10.2.0\server\bin; C:\Windows\System32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows\system32\WindowsPowerShell\v1.0\
    2011-04-05 12:12:11.714 NOTIFICATION rcu: oracle.sysman.assistants.rcu.Rcu::execute: launch RCU.
    2011-04-05 12:12:11.714 NOTIFICATION rcu: oracle.sysman.assistants.rcu.Rcu::execute: InteractiveRCUModel of creation
    2011-04-05 12:12:12.224 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.xmldata.RepositoryConfigManager: < init >: rather than DTD: D:\SOA1114\rcuHome\/rcu/config/
    2011-04-05 12:12:12.224 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.xmldata.RepositoryConfigManager: < init >: ComponentInfo xml location: D:\SOA1114\rcuHome\/rcu/config/ComponentInfo.xml
    2011-04-05 12:12:12.224 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.xmldata.RepositoryConfigManager: < init >: xml storage location: D:\SOA1114\rcuHome\/rcu/config/Storage.xml
    2011-04-05 12:12:12.224 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.xmldata.RepositoryConfigManager: < init >: DTD Validation: true
    2011-04-05 12:12:12.234 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.RCUCommandLineParser::process: processing command line...
    2011-04-05 12:12:57.107 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine::connect: the connection to the database: user: sys, role: SYSDBA, connectString: (description = (address = (host = localhost)(protocol=tcp) (port = 1521)) (connect_data = (service_name = XE) (server = dedicated)))
    \rcuHome\/RCU/integration//EPM/registry/RepositoryConfig.XML is valid

    2011-04-05 12:12:58.267 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.xmldata.RepositoryConfigManager::parseStorageData: XML Document: D:\SOA1114\rcuHome\/rcu/config/Storage.xml is valid
    2011-04-05 12:12:58.467 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: turnaround time for initialization of configuration metadata repository: 640 milliseconds
    2011-04-05 12:12:58.467 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: execution of task: get the properties of the specified database
    2011-04-05 12:12:58.467 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.validation.PrereqEvaluator::executePrereqTask: Prereq taskId = PREREQ_QUERY_DATABASE
    2011-04-05 12:12:58.517 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: lead time to get the properties of the specified database: 50 milliseconds
    2011-04-05 12:12:58.517 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: execution of task: obligation of verification for the specified database
    2011-04-05 12:12:58.517 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.validation.PrereqEvaluator::executePrereqTask: Prereq taskId = PREREQ_GLOBAL_CHECK
    2011-04-05 12:12:59.967 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: lead time for the requirement of verification for the specified database: 1450 milliseconds
    2011-04-05 12:12:59.967 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: task execution: run before create operations
    2011-04-05 12:12:59.967 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.CustomCompManager::getActionList: CustomCompManager.getActionList: CUSTOM_COMP_PRELOAD_SETUP
    2011-04-05 12:12:59.977 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.AbstractCompTask::execute: ValidationRule result was false. Jump action: oracle.ias.version.SchemaVersionUtil:utilCreateRegistryAndCopyData
    2011-04-05 12:12:59.977 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.AbstractCompTask::execute: ValidationRule result was false. Jump action: oracle.ias.version.SchemaVersionUtil:utilCreateRegistryTable
    2011-04-05 12:12:59.977 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: lead time to run before the operations of creation: 10 milliseconds
    2011-04-05 12:14:15.656 NOTIFICATION rcu: oracle.sysman.assistants.common.task.ProgressPanel::progressToNextTask: waiting for delegate be visible
    2011-04-05 12:14:15.666 NOTIFICATION rcu: oracle.sysman.assistants.common.task.ProgressPanel::progressToNextTask: waiting for delegate be visible
    2011-04-05 12:14:15.676 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: execution of task: Metadata Services
    2011-04-05 12:14:15.676 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.validation.PrereqEvaluator::executePrereqTask: Prereq taskId = MDS
    2011-04-05 12:14:15.676 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.validation.PrereqEvaluator::executePrereqTask: from prereq check component
    2011-04-05 12:14:15.706 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: turnaround time for metadata Services: 30 milliseconds
    2011-04-05 12:14:15.706 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: execution of task: SOA Infrastructure
    2011-04-05 12:14:15.706 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.validation.PrereqEvaluator::executePrereqTask: Prereq taskId = SOAINFRA
    2011-04-05 12:14:15.706 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.validation.PrereqEvaluator::executePrereqTask: from prereq check component
    2011-04-05 12:14:15.706 rcu ERROR: oracle.sysman.assistants.rcu.backend.task.PrereqTask::execute: Prereq evaluation failed
    Refer to the journal of the RCUS to D:\SOA1114\rcuHome\rcu\log\logdir.2011-04-05_12-12\rcu.log for more details.
    at oracle.sysman.assistants.rcu.backend.validation.PrereqEvaluator.executePrereqTask(PrereqEvaluator.java:642)
    at oracle.sysman.assistants.rcu.backend.task.PrereqTask.execute(PrereqTask.java:68)
    at oracle.sysman.assistants.rcu.backend.task.ActualTask.run(TaskRunner.java:306)
    at java.lang.Thread.run(Thread.java:619)

    2011-04-05 12:14:31.806 rcu ERROR: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: UCR failed
    oracle.sysman.assistants.common.task.TaskExecutionException: UCR-6083: impossible - check requirement prerequisites for the selected item: SOAINFRA
    Refer to the journal of the RCUS to D:\SOA1114\rcuHome\rcu\log\logdir.2011-04-05_12-12\rcu.log for more details.
    RCU - 6107:DB prerequisites for Init Param failed: process
    Current value is 40. It must be greater than or equal to 200.

    at oracle.sysman.assistants.rcu.backend.task.PrereqTask.execute(PrereqTask.java:76)
    at oracle.sysman.assistants.rcu.backend.task.ActualTask.run(TaskRunner.java:306)
    at java.lang.Thread.run(Thread.java:619)

    RCU - 6107:DB prerequisites for Init Param failed: process
    Current value is 40. It must be greater than or equal to 200.

    Please increase the DB process parameter properly. Please see-

    http://www.Oracle.com/technetwork/middleware/soasuite/overview/quickstartguidesoasuite11gr1ps3-313245.PDF

    Run under SQL before starting the RCU-

    SQL > alter system reset sessions scope = spfile sid ='* ';
    SQL > change processes control system = 300 scope = spfile;
    SQL > shutdown immediate
    SQL > startup

    Kind regards
    Anuj

    Published by: Anuj Dwivedi on April 5, 2011 13:24

  • After the installation of the oracle, where need to change in my program

    Hello everyone.

    I want to upgrade the oracle 8i to 10g. I think I need to change somewhere in my program on SQL, PL/SQL and Pro * C, if I want the program can run without any problem.
    Can someone tell me where can I change my program.
    I want the list that needs to change SQL, PL/SQL and Pro * C.

    Thank you very much.

    Basic thing you need to do is to run a test environment when you upgrade your database to 10g and run the application against the same for whether something should be changed. If you get any errors with your tests, you don't need to change anything immediately.

    Of course, you can improve the design of your application by using the new features provided in 10g.

    And no one can give you a list of things that need to be changed because it is specific to your environment.

  • is there a way to make the icons remain in the same places and not move when I turned off and restart my desktop computer? I like to keep the icons where I put them.

    I do a lot of important writing, and it would be so much nicer if the icons of file would be left in the same positions on the desktop, so that when I started working I don't panic, thinking that some kind an important file has been lost. Please help me understand how to set up my office to keep my icons in place, if possible. Thank you!

    Make sure the settings are as the other poster said.

    This could happen if the Explorer doesn't correctly. The positions of icons are saved at the stop.

    As an experience shutdown shut down Windows Explorer.

    • Create and position a file on the desktop.
    • Close Windows Explorer
    • Start - All Programs - Accessories - right on command prompt and choose run as administrator.
    • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
    • Press Ctrl + Alt + Delete then Task Manager.
    • Control all processes to explore are closed. On the process tab see if Explorer is displayed.
     
    Then to restart Explorer
    • Press Ctrl + Alt + Delete and choose Task Manager
    • In the Task Manager, click the file menu and then click new task (run) and enter explorer

    Is your file in the correct position?

    General Explorer Fixs

    To see if a fix is available

    In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution.

    You can also right-click and choose Details for more information. Post these details here. The name of the Module fault is important information.

    If the problem affects the control panel press Windows key + R and type wercon.

    Close the browser and start a command prompt
    • Close Windows Explorer
    • Start - All Programs - Accessories - right on command prompt and choose run as administrator.
    • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
    • Press Ctrl + Alt + Delete then Task Manager.
    • Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
     
    Then to restart the Explorer after trying all of the following
    • Press Ctrl + Alt + Delete and choose Task Manager
    • In the Task Manager, click the file menu and then click new task (run) and enter explorer
    Reregister the shell registry entries
     
    Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
     
    regsvr32 /i shell32
    regsvr32 /i urlmon.dll
    regsvr32 RPCRT4.dll
    regsvr32 PROPSYS.dll
    regsvr32 MSCTF.dll
    regsvr32 cscui.dll
    regsvr32 rsaenh.dll
    regsvr32 timedate.cpl
    regsvr32 ATL DLL
    regsvr32 OLEACC.dll
    regsvr32 actxprxy.dll
    regsvr32 USERENV.dll
    regsvr32 msshsq.dll
    regsvr32 NaturalLanguage6.dll

    regsvr32 thumbcache.dll
    regsvr32 WINTRUST.dll
    regsvr32 MMDevAPI.DLL
    regsvr32 audioses.dll
    regsvr32 audioeng.dll
    regsvr32 ExplorerFrame.dll
    regsvr32 msi.dll
    regsvr32 FirewallAPI.dll
    regsvr32 netshell.dll
    regsvr32 pnidui.dll
    regsvr32 QUtil.dll
    regsvr32 c:\windows\system32\wpdshserviceobj.dll
    regsvr32 WINHTTP.dll
    regsvr32 C:\windows\system32\qagent.dll
    regsvr32 C:\windows\system32\portabledeviceapi.dll
    regsvr32 wbemprox.dll
    regsvr32 wbemsvc.dll
    regsvr32 fastprox.dll
    regsvr32 imapi2.dll
    regsvr32 wshext.dll
    regsvr32 gameux.dll
    regsvr32 msxml6.dll

    regsvr32 vbscript.dll

    regsvr32 jscript.dll
    regsvr32 wshext.dll
    regsvr32 wshom.ocx
    regsvr32 wshcon.dll
    regsvr32 scrrun.dll

    Delete folder settings
     
    Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
     
    Reg delete "HKCU\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell" /f
     
    Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams" /f
     
    Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StuckRects2" /f
     
    Delete the thumbnail and icon Caches
     
    Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
     
    del "% userprofile%\AppData\Local\IconCache.db".
     
    del "% userprofile%\AppData\Local\*.db".

     
    A boot is a way to explore
     
    It can be caused by a shell extension.
     
    The Explorer is built on addin programs called Extensions of Shell. The standard is provided by Microsoft, but programs add their own.
     
    • Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
    • Close Windows Explorer
    • Start Autoruns by right-clicking and choose run as administrator
    • Click on the menu Options - Filter Options and check hide Microsoft entries and disable include empty locations
    • Go to the Explorer tab and uncheck everything to the left.
    • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
    • Press Ctrl + Alt + Delete and choose Task Manager.
    • Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
    • Click the file menu and then click new task (run) and enter explorer

    and if it helps, re-enable one by one to identify the who.

  • where to put pots of third parties used by the custom developed plugin

    Hi all

    I developed an event handler custom where I connect to the db2 database. Where should I put the pots of db2 driver driver? I should pack them with the plugin, or it has a central place in the IOM where we put the municipality using pots...

    Any help is greatly appreciated...

    ARO
    Aliye

    You should be able to place them in the ThirdParty file and then use the script UploadJars to transfer to the database. I have found in the past, but for other database drivers work, I had to add the path of the server class. If you connect to the weblogic console and select your IOM server, select the Startup tab. Under the class path box, add the path to your db2 driver. Then restart your server and it should be good to go to find the library.

    -Kevin

  • Windows 7 pro 64. The desktop icons won't stay where I put them. After a reboot, the desktop icons are always rearranged.

    I've set up my office while I have the following icons down the left side of the top in the following order: computer, network, System (C), (D) options, reader of DVD (E), trash.

    Whenever I restart my computer, the icons are rearranged as: computer, network, trash, reader of DVD (E), options (D), System (C).

    I don't want to add all the new icons on the desktop, because I know they won't stay where I put them. When I was using XP it would happen only when I changed resolution but with Win 7, it happens every time that I reboot.

    Reorganization of auto desk is off, snap to grid is turned off, sort by has verified. I use two monitors. All the gadgets that I have in my hand right 2ndary monitor are stay in place very well. The icons gives me the problem are on the left side of the left main screen.

    I made an image of my hard drive just after the installation of windows 7 and before to install the drivers of manufacturers and updates of windows.

    Today, I restored this image, reinstalled the drivers from manufacturers and made the updates of windows. The problem seems to have disappeared now.

    I am re-imaging my hard drive after you install the complete driver/updating. I hope I don't need to use it, but I will if I have to. I still don't know what caused it in the first place, but at least now I have an option of fast food if it happens again. I'll recreate the image on the hard drive after all major software install from that time, I have two images. A fundamental right after pilot installations and one after each installation of software.

  • Installation of 12 ODI - error of the UCR

    Hello

    I wanted to install ODI 12.1.2.0 on our server. But we are facing problem in the configuration of the ODI that my version of the UCR is 11.1.1.9.0. I surfed on the internet for hours and I am unable to find the configuration RCU (12.1.2.0/12.1.3.0) download page in OTN. Can someone help me with the URLs for the UCR files download please?

    Thank you

    Hi Aramast

    I checked in the table above yesterday and the table of the STB was not available. However, now I understood where I was wrong. During the installation of distribution of Fusion Middleware, I chose Fusion Middleware with examples.

    Today, I uninstalled all the configurations and the home of the registry and made a cool installations by selecting a different option, and I fixed it. Now, I have configured the ODI with Oracle web logic server and the base domain is being created. Thanks for your help to find the rcu.bat file.

    Concerning

    Oumaima

  • Re: Where to find the installation of the driver so that the Satellite A500 - 14q?

    Hello...

    I use Toshiba numere for awhile now and I never really paid attention to the order of installation the installation of the drivers.
    Now, I'm doing some research around this forum and discovered order 'is' somewhat important. or not?

    I just usually begin as desktop:
    Chipset, graphic, audio, and then all the rest. OK, toshiba must also have this addon of value, but I never installed in a specific order.

    So, the question is - where to find that my current machine (a500 - 14q) and my future one (p775.10j)?

    Thank you very much...

    Hello

    The order of installation is important if you are installing the tools of Toshiba.
    Some tools require installation of other tools.

    I looked into some of this forum for similar topics and found some details:
    Order of installation of Win 7:
    1 Windows 7 64 bit
    2 Intel Chipset SW Installation Utility 9.1.1.1019
    3 Intel Matrix Storage Manager 8.9.0.1023
    4 AMD driver 8.634.1 - 090729 a-086065C-Toshiba to display
    5 NVIDIA HD Audio Driver, 1.0.0.55
    TOSHIBA 6 utility 1.63.0.7C supervisor password
    7 TOSHIBA HW Setup Utility 1.63.0.11C
    Utility support 1.63.0.4C 8 TOSHIBA Flash Cards
    9 Realtek Audio Driver 6.0.1.5904
    10 Intel Wireless LAN Driver 12.4.1.11.0.s64_wCAT
    11 Synaptics Touch Pad Driver 14.0.1.1
    TOSHIBA Software Modem 2.2.97 12 (SM2297ALS03)
    13 Toshiba HDD Protection 2.2.0.2
    14 Bluetooth Stack for Windows by Toshiba v7.00.08 (T)
    15 Realtek LAN Driver 700.305.222.009
    16 Jmicron 1.00.32.01 card reader
    17 Sleep USB TOSHIBA and 1.2.3.0 service fees
    Facial recognition TOSHIBA 18 V3.1.1
    19 TOSHIBA eco Utility V1.1.11.64
    20 Sun Java2 Runtime Environment 1.6.0_14
    21 TOSHIBA HDD/SSD Alert 3.1.64.0
    22 TOSHIBA Service Station V2.1.33
    Control HDMI 23 2.0.0.1.64 Manager
    Manager remote control TOSHIBA 24 3.0.0.0
    25 TOSHIBA SD utility 1.9.1.12
    26 TOSHIBA PC Health Monitor 1.4.1.64
    27 TOSHIBA Fingerprint Utility 1.0.2.9
    ConfigFree 28 8.0.23
    29 TOSHIBA Web Camera Application, V1.1.1.4
    30 TOSHIBA Software Modem region Select utility 2.3.0.13
    31 TOSHIBA Network Device ID registry tool 3.0.32.4
    32 TOSHIBA Bulletin Board 1.0.04.0
    TOSHIBA ReelTime 1.0.04.0 33
    Memory SD 34 V1.9.1.12 utilities
    35 value package V1.2.26_64

  • iCloud often ask a security code 4 digits.  I have no idea what it is, my code is six digits.  What is the 4 digit version and where I put or find it?

    iCloud often ask a security code 4 digits.  I have no idea what it is, my code is six digits.  What is the 4 digit version and where I put or find it?

    Have you implemented 2-step audit on your Apple ID? If you do this, then whenever you connect to icloud.com you are likely to be asked for the security code, which will be sent by SMS to your device of 'trust' - mainly the mobile phone you have registered with Apple.

    The six-digit code that you think is probably the password in your iOS device, which is quite distinct.

  • The simple question is "where can I find the installer for the HP Quick start?

    The simple question is "where can I find the installer for the HP Quick start?

    BESR regards

    Hello:

    And here's one for W8...

    http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_140915_1#tab1

  • Where to put the IP lease expires?

    I would like to know on where to put the IP Address of the lease, which is currently 30 minutes

    Does anyone have any suggestions?

    Thanks in advance for your suggestions :>

    Lease obtained... April 1, 2014 12:29
    End of the lease. April 1, 2014 12:59 AM

    Image
    http://I1093.Photobucket.com/albums/...ps367c6819.jpg

    In your router.  Like this:

  • I get the error code 643 during the installation of the dates... I tried yesterday, some steps that have been put to me... they did not work... Please help

    I get the error code 643 during the installation of the dates... I tried yesterday, some steps that have been put to me... they did not work... Please help

    There are 2 updates will not install... Ive had this problem for the last 6 months

    See if this Microsoft Support will help you:

    http://support.Microsoft.com/kb/976982

    Note: there are 2 methods. If the August challenge it for me does not help, try a 2nd.

    Another article to number 643
    http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070643

    .........................................................................................

    Take a look at this answer of MS Answers forums:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/what-is-error-code-643-Windows-vistaunable-to/4ab6dd4e-e9eb-4a0f-b822-ad976e2c33c6

  • WRT120N - impossible to find where to put the DNS I want to use

    I bought a WRT120N to replace a Netgear, I had.

    I can't find in the management console where to put the DNS servers, I want to use.

    Can someone give me please the exploration to find.

    If you want to configure a static DNS on your router, and then connect to the Setup page of your router and on the tab of configuration below, you will find static DNS1 and DNS2 DNS3. For example, you can configure a static dns on your router.

  • gay techni"who put my Norton360 security program in the store where I get my computer, make an administrator account... I'm looking for is whot the password. much thanks streit a wey

    gay techni"that put Norton 360 Security program in the store where I get the computer, is also the administrator account / how to find a password...

    I suggest that you ask them what password they put in place for you.

    http://support.Microsoft.com/default.aspx/KB/189126

    "Microsoft's strategy concerning lost or forgotten passwords"

    Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. Mick Murphy - Microsoft partner

Maybe you are looking for