Installation of Windows XP on Satellite Pro L300D-136

Similar Questions

• Installation of Windows XP on satellite Pro A200/S01

  Toshiba Satellite A200/S01 PSAF6A-06S01N
  I need help to determine which driver I need to install to control the SATA hard drive.

  Because many know that the SATA drives will not work when installing Windows XP, Windows XP does not have drivers for this type of hard drive.

  I have located on drivers site Web for hard disk for a toshiba XP machine, but I am unable to determine which driver to install (list of 15 when I load floppy)? or it doesn't work because the machine was installed with vista?

  Is it possible to match a HDD to the pilot?

  Background:
  I formatted the hard drive, xp installation disc is xp pro with Service Pack 2.

  I hope someone could help me because it makes me crazy ready to give up and reinstall vista on the machine

  Hello

  The SATA drivers are part of the Intel Matrix Storage Manager.
  There are a lot of discussions on this subject.

  I found these two Toshiba HowTo that describes step by step how to do:

  + How to integrate the AHCI driver during the installation of Windows XP.
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  + How to integrate a SATA AHCI driver into a Windows XP Setup CD.
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  Seems the Satellite A200/S01 PSAF6A-06S01N belongs to the Australian series of Toshiba.
  Drivers of this laptop are on the Toshiba on THE page but you can also download the Storage Manager Intel from the page of the European driver Toshiba or Intel page because the hardware is the same.

• Installation of Windows XP on Satellite Pro P200

  Hi guys,.

  I have a problem installing Windows XP Home SP2 (listen Slip) edition in my new Satellite Pro P200 with 2-120 GB hard drives. The vehicle currently has windows vista professional. I followed this link to a similar question on this site: http://downloadcenter.intel.com/filter_results.aspx?strTypes=all&ProductID=2101&OS FullName = Windows * + XP + Professional & lang = eng & strOSs = 44 & submit = Go % 21 and created disk Intel Matrix Storage manager so that I could use "F6" to install the RAID drivers during the installation of XP.

  I got to the point where I was able to recognize the hard drive and I was able to select the partition where I wanted to install WXP. Once the NTFS partition has been selected and formatted, Windows XP Home edition Setup prompted me to insert "Intel Matrix Storage" diskette into the A: drive. I have this drive in my floppy USB drive.

  However he didn't even read the disc. Hard drive never turned on when I pressed the enter"" key. It seemed as if the installer froze, however I was able to push "F3" to exit the installation program. Can someone tell me what I'm doing wrong here? Is the USB problem?

  Help, please!

  I really put t understand those who wait and wait and wait for a solution instead of search here in this beautiful (forum) knowledge base for similar topics:

  Check this box:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26040

• Installation of Windows XP on Satellite Pro L20

  Hi all!

  My problem is with a Satellite Pro L20.

  My hard drive broke so I replaced it. Now, when I try and install windows xp pro on the new hard drive, it does nothing. First of all, I put the disk it starts to load and say to support on enter to launch xp installation, R to repair windows or F2 to exit but when I press ENTER, nothing happens if I press R, it starts to look for windows in order to repair, but no windows system cannot be found because it s not been installed but know someone or have any good suggestions on how to get windows installed.

  Any information would be most appreciated.

  I could also just add that when the computer starts first and it s on the first boot of the bit with the Toshiba logo we have 2 options F2 and F12, none of them work when I press them and also when I pressed r in the window xp installation you should be able to type exit, and then enter to leave but some type of keys and some don't but be4 just broken hard drive it typed very well no problem, if it is the problem cos I can't press on enter how fist to solve the problem of keyboard?

  Thank you once more for the reading of my problem.
  Kind regards
  Dave

  I used a panel of USB plug-and-play installation of windows this fantastic worked

  Post edited by: dave1982

• Installation of Windows XP on Satellite Pro L40

  Hello

  I would like to install windows XP on my Satellite pro L40.

  The installation instructions, I download and create a driver AHCI FDD.

  Installation instructions present in the selection of the type of driver that I need to select PACKAGE DRIVER but I can't find this selection as if I fallow the instructions for installation.

  Can some one Board to create AHCI FDD.

  Download the Storage Manager and check the AHCI HDD... folder. You will find everything you need.

• Installation of Windows ME on Satellite Pro L20

  I need for the program to install windows Millennium Edition on my new laptop, but when he starts (during the installation procedure) search for devices it crushes and just stop.
  What can I do? I tried to update the BIOS but still the same after.

  I really put t know what you can do, but I really don t understand why you buy the laptop latest designed to the latest operating system available on the market and then try to use the older operating system. I hope you know that there is no support for older OS.

  In my opinion, much better and cheaper option is to buy second hand laptop and install the earlier operating system. With more Ram, the older unit will run fantastic.

  The second problem are the drivers and Toshiba tools that work well with me. Where you find them? You won't find them on the official download page of Toshiba.

  In any case, good luck and I hope that someone already try to install ME on the same unit.

  Good bye

• Satellite Pro L300D-136 - need for Bluetooth instructions

  I bought one of these recently and announced with bluetooth on the box.

  However, I can find nowhere in the instructions (outside of the index, the page, he refers to is empty) or Vista use it or find where he's hiding in the operating system? Any suggestions?

  Are you sure that you have Bluetooth on your laptop? Not every cell phone comes with Bluetooth in order to check this first.

  Normally in the manual mode, you should find some information about Bluetooth technology and perhaps this site is also useful for you:
  http://APS2.toshiba-tro.de/Bluetooth

• Satellite Pro L300D - 22nd: Installation Win7 64-bit ends with BSOD

  Hello

  I'm having a major problem to install 64-bit Windows 7 Enterprise Edition on a whole new Satellite Pro L300D-22nd. Windows 7 32-bit and 64-bit of Windows Vista install correctly with zero problems or questions.

  I tried...

  Installation CD start-up costs
  Update install leave in Windows Vista 64-bit with the latest device drivers
  Off the device in the BIOS

  Everything I try to get exactly the same result...

  "STOP: c00021a {fatal system error}.
  The initial session process or system processes set end unexpectedily
  Blocking indicator 0 x 00000000 (0 xC0000001 0 x 00100438).
  The system has been shut down. »

  Anyone know what could be causing this and how I can go about fixing the problem and get Win 7 64 bit installed on this laptop?

  Thank you

  What version of Win7 is this?

  Beta? RC? RTM?

  Have you updated the BIOS with the latest version?

• Satellite Pro L300D - 11 M - need drivers for Windows XP Home edition

  Good afternoon! Help to find the drivers on the operating system Windows XP for Toshiba Satellite Pro L300D - 11 M
  Thank you!

  If I have not clearly written something that you let me know please, I'm simple I do not speak English, I have Russian and to transfer, use the online translator.

  Master_of_Disaster

  Big thanks for help!

• Satellite Pro L300D PSLC9E - failed to update BIOS

  Hi all

  I got a Toshiba Satellite Pro L300D Windows Vista Business, this isn't that four months, recently, he began to break up and whenever he did, I got a message to upgrade the BIOS.
  So I went to the Toshiba Site and I downloaded an updated BIOS yesterday and installed even today, during installation the PC frooze.
  I left it on and it stayed like that for four hours, then it turns off.

  Now, when I turn it on all that I get is the fan turns to nothing else.
  The powerleader was connected to the laptop all the time.

  Do you have any ideas on what I can do, I have heaps on the laptop I would not loose.

  Model is PSLC9E Satellite Pro L300D

  The case is clear buddy update the BIOS has no procedure
  Perhaps the BIOS might not be updated correctly because the laptop crashed until the update procedure could be completed.

  Well, I can tell you that you will not be able to fix it yourself it's a serious issue and ONLY the ASP (certified partner) would be able to help you!

  So contact the ASP technician and ask for later handling.

  Good luck

• Satellite Pro L300D SP5802 tools and BONES

  Hi guys
  I just bought a Toshiba Satellite Pro L300D-SP5802 laptop and it has Windows Vista
  I have havve 2 recovery DVD. One of these States for Windows XP Professional.

  I would like to know before all formatting:

  1 XP Recovery DVDs will help me with the drivers, utilities, etc. When I install Windows XP?

  2. will I need an additional XP license? or can I use the key provided at the bottom of the laptop?

  3. some URLs to get the upgraded drivers for this model? (no info at toshibalatino.com)

  Thank you very much in advance

  Hello

  I'll try to answer your questions ;)

  1 recovery image contains all the drivers, tools and utilities and after recovery image installation you don't need to install anything. Everything will be installed correctly.
  2. don't you are useless there. This is image recovery and not typical installation where you must enter the product key.
  3. to give answer to this question, please let us know in which country you purchased your laptop.

  Good bye

• Devices Satellite Pro L300D-110 - downgrading to XP Pro - HARD drive missing?

  Hello to everyone in the Toshibe Satellite Pro - my first post forum.

  I was one proud owner of other portable Tosh without any problem, but this time, I'm miserable: (o)

  For professional use a few days ago, we bought a laptop Satellite Pro L300D 110 (AMD Athlon Dual Core). We bought it with the understanding that it could be brought back to XP Pro - mainly because some of the software that we use on a daily basis does not work reliably on Vista, but also because all other laptops to desktop computers in our network (including a WLAN) all running XP Pro, adding another machine that it should have been easy.

  The need to do so has been confirmed by the fact, nevertheless, I tried, we could just not get the new Toshiba L300D connection through our routers so that under Vista. At the same time, we also bought a new Dell with no o/s. I installed a new copy of XP Pro SP2 OEM - and it runs under the sweet as a nut! Sorry, I digress:

  I reduced the L300D to XP Pro very well using the XP Pro provided - Toshiba Recovery disk no problem at all. I had the computer connected to the network too, but then I realized that the DVD (Pioneer DVD - RW DVRTD08A ATA) is not found by Windows.

  Logged in the BIOS setup - Yes, he was listed there OK, but tried some tongs and tricks I have learned over the years, I still couldn't XP Pro to the discovery of the device.

  I have now reinstalled Vista on the machine and he found the DVD burner.

  If it's a PC, I shut down the computer, open the case, disconnect the writer, start, stop, reconnect the device, close case and bingo. But not with perhaps a laptop...

  Someone has ideas how (reliable!) downgrade to XP Pro without devices being endangered? Any help would be greatly appreciated.

  I have two copies again more XP Pro SP2 at my disposal, if that's any use.

  Kind regards

  David

  (> I'm happy again now: o)
  Great to hear that!

  Just for info:
  The most recent series of portable supports the newer SATA HDD controllers and so the operating system can be installed if the SATA drivers are not included and preinstalled.

  So if you want to use the SATA features you must first install the SATA driver.
  But you can also activate SATA mode to compatibility mode (in BIOS) and this would install the Win XP without the necessary SATA drivers.

  Good bye

• Satellite Pro L300D started crashing when you are connected to the projector

  Hi all, I have a Satellite Pro L300D, have since January. In March of this year, it developed a problem.
  He began to turn the power on and off screen until I got the blue screen of death and had to reboot the laptop, also BIOS crashed. He was sent to Toshiba and got sorted.

  I use the laptop in the Church for the presentation to the powerpoint, we use a projector that connects to the video output on the laptop, but it has now begun to crash whenever I connect the projector to your laptop.

  Can I use the powerpoint, switch to the view of presenters and show the presentation of 30 minutes, then the screen goes black for about a second, the laptop and the projector off, then when they come again, I get a message saying that the display driver has been restarted, little after that the screen turns off, and then market / stop about six times before that I get the BSOD.

  Also, if I show a clip AVI or video during the presentation, it will crash soon after or even before its done.

  Have updated the drivers for laptop, I always get a message stating all the drivers are up to date and I am quite at a loss to know what to do next.

  To be honest, I'm so fed up with it that I am almost to the point of buying an Apple Mac Pro and away from Windows-based computers all together, my friends have macs and they never have any problem.

  Someone at - it an idea on what could be the problem?

  RGS
  James

  Hello James

  Can you please tell me what mode you are using for the presentation?
  Is that what this duplication mode (the same image on the LCD screen and the external device) or something else?
  Do you have problems if you use the single external device (LCD screen is OFF)?

  Movie files can be problematic if you run on laptops LCD and try to switch to the external display while the movie is running.

• Re: Satellite Pro L300D - 11O 800 MHz RAM installed, only to 667 MHz

  I recently bought a Satellite Pro L300D-11O, which has a single stick of 1 GB 800 MHz RAM installed. However this RAM work only at 667 MHz. I checked this in Linux and Windows Vista.

  The laptop is announced as to have 800 MHz RAM on this page:

  http://UK.computers.Toshiba-Europe.com/innovation/JSP/SUPPORTSECTION/discontinuedProductPage.do?service=UK&BV_UseBVCook ie = Yes & PRODUCT_ID = 1055796

  The manual of the user who wrote:

  "PC2-6400 memory module works as PC2-5300 speed the GL40 Express Chipset Express chipset/GL965"

  I don't know what chipset I have, and it would be surprised that this would be the case that the above Web site explicitly states RAM 800 MHz.

  Can someone tell me please?

  Hello!

  Now I'm a bit confused of Mr. I think you did search in the wrong user's manual because the Satellite L300D has no Intel chipset.
  On the Toshiba site, you can download the manual for Satellite L300D:
  http://EU.computers.Toshiba-Europe.com-online downloads support & -online download user manual

  I think that your chipset only supports 667 MHz. normally the RAM always works on the highest speed that is supported by the chipset.
  Check the specifications with Everest or PC Wizard 2008.

  Good bye

• Satellite Pro L300D ubuntu and Driver Chicony Webcam

  Hi all

  Im having problems for my webcam to work on my Satellite Pro L300D laptop, its supposed to be for a Chicony b070.
  Before leaving, perhaps you should know Im using Ubuntu 8.04 Hardy Heron (still not improvement since this is a production machine).

  A more complete report can be found [here: https://answers.launchpad.net/ubuntu/+question/51545]

  Basically, the dev is created but it seems that HAL does not know how to work with it: S Im not even not sure Im in need of a driver in itself or just a tweak of config...

  Thank you for your time

  Hello

  As you can see for days nobody anything post here. I think the reason is quite simple. Linux is not supported and most people use the preinstalled operating system.
  I think you should try to find the answer on the Ubuntu forum. Here you can meet people with good experience of Ubuntu.

  If you find a solution please let us know. All useful info may help others here.