installation printer hp photosmart c4400 all in one series

just received the printer above.  I tried to load on my windows 7, but it comes up with a message to say is is not compatible with windows 7 and to get an update ofwww.hp.com/go/windows7.  When I go on this link, it says is no longer available to go to microsoft.  what I do then, I'm a complete novice with computers, so if someone had the answer can you explain in detail

Go to the website of HP (http://www.HP.com/cposupport/Loc/), click on the link for support and
drivers. Check the box to download the drivers and software, then put your
Model number of the printer in the search box. You will see the drivers and
software that are available for your printer.
 
"feljo" wrote in message
News: * e-mail address is removed from the privacy... *
just received the printer above. I tried to load it on my
Windows 7, but it comes up with a message saying it is not not compatible with
Windows 7 and to get an update of www.hp.com/go/windows7. When I go to
It is no longer available to this link, it says to go to microsoft. What should I do
Then, I am a novice complete with computers so if someone had the answer
can you please explain in detail
 
 

Tags: Windows

Similar Questions

  • my printer hp photosmart c7280 all-in-one

    my printer hp photosmart c7280 all-in-one does not stop

    Hello! Welcome to the @Lukewp forums

    I read about how your printer will not turn off. My best advice would be to unplug it from the wall and let it sit unplugged for a minute or two.

    Try turning the power on to the top and see if this is useful, and if you can feed it to the wide by the power button.

    Let me know the results

  • New printer hp photosmart c410a all-in-one

    I use the new printer hp photosmart c410a all-in-one and have a paper jam in the printer.

    Need help I can not easily see the paper blocked under the trays.

    Thank you!

    Hello

    Below the document should help you remove the paper jam:

    http://support.HP.com/us-en/document/c02110413

    Hope the information provided will help you!

  • Reinstallation of HP Photosmart e-All-IN-one series D110

    My operating system is Windows 8 (64 bit) I had to unstall my HP Photosmart e-all-in-one series D110 printer. I had problems with it a few times where I received a message that it was installed properly and put on the CD to complete the installation.  But when I put the CD in I got the page but there is no other option than EXIT. I use the wireless control. So, no I unhooked the printer and used a cleaning tool. Restarted my computer and put it in the drive to start the installation.  I get this same page with only one OUTPUT option.  Any thoughts what I can do to have it installed.

    I suggest you download the driver from HP here. Another alternative would be to use the Assistant driver available at http://www.hp.com/go/tools.

  • HP Photosmart 2570 all-in-one series.

    I have a Hp Photosmart 2570 all-in-one series. I can't install it on my new laptop which has windows 7 (home premium) and microsoft office professional plus 2010 is installed.

    He tell me it is only compatible with windows 2000 and windows xp and vista, and I need to improve.

    Please can I find advice on how I can install this in a very simplified way.

    regards Diamond1967.

    See here for an update of drivers.

  • What is the difficulty for printer fault General 0x61000f6 for a printer hp photosmart premium all-in-one?

    1 HP Photosmart Premium all-in-One Printer (309 (a)

    2. Windows Vista 64-Bit family

    3. the general printer error 0x61000f6

    4. no change known to printer before developed problem

    0x610000f6 error code is an indicator of a jam of transport in the Photosmart C309a. Please see the document located here for the procedure to help fix a carriage jam.

    Let me know if it helps.

  • HP Photosmart C6100 all-in-one series. This printer has a function of history?

    I have a HP Photosmart C6100 all-in-one printer and was hoping someone could help me with a problem I have.

    A few months ago, I printed out some information I needed. I subsequently lost this info with my lap - top and unfortunately, had not saved the scource.

    Is it possible that this information is available from my printer, and if so, how can I access it?

    I would be very grateful if someone can help me with this problem. Cheers, Alex.

    No sorry there is no such a function.

  • Currently, I have installed my HP Photosmart C6180 all-in-one series

    How can I get my printer to print from my pc?

    If you have lost or do not have the HP Photosmart C6180 all-in-one configuration guide, you can find it here in PDF format.
    You can find the HP Photosmart while here in PDF format.  Go here to order installation CD-ROM (v7.0.2 August 15, 2009)
    or to download the drivers, applications, patches, updates, and utilities.  Do not connect the printer immediately!  Read, then
    Follow the instructions to install the printer.

    You will need the Adobe Acrobat Reader software to read PDF files, if you do not already.

    You can vote if it is useful.  Click on brand or propose as answer if that answers your question.

  • I tried to connect my printer HP Deskjet 2540 all-in-One Series to my Dell Inspiron 15

    Separated from this thread.

    Hi Bill,

    I tried to connect my HP Deskjet 2540 all-in-One Series printer to my Dell Inspiron 15 for two days without success.  Can you help me?

    Lenora,

    I have a HP DeskJet 2540 on my Dell Inspiron 1545.

    The instructions from HP work so you should be fine if you follow them.  The CD contains a ReadMe file that describes the installation procedure.

    You must install the software first, and only then connect the printer.  Note that you will first need to install it on a USB connection.  You can change this later if, like me, you intend to use it with WiFi.

  • Photosmart C4400 all-in-one printing problem

    My C4400 faithful is not print properly, don't give me indications of levels of low ink and Solution Center says it is not connected. I have replaced the ink (black) cartridge, but still only get a gray print, lineage. I tried alignment heads and cleaning but no luck. Can someone advise me please?

    Hello

    If I understand correctly, the page is faded and has a streaks on the print, when you try to print from HP Photosmart C4400.

    Kindly click on the following link to fix the problem.

    http://support.HP.com/us-en/document/c01004653

    Although I am an employee of HP, I speak for myself and not for HP.

    -Say 'Thank you' by clicking on the star of congratulations in the post helped you.
    -Please indicate the position that solved your problem as "accepted Solution".

    Kind regards

    Vijay

  • HP Photosmart c4400 all in one and Windows 8

    Hello

    My friend has Windows 8 on its new Toshiba Satellite c850d-11 q.

    Trying to install his C4400 printer all in one, a message appears saying that it was not compatible with the OS

    Can I download drivers for this OS, if so how please?

    It almost takes an idiots guide but can follow the advice.

    Thank you

    Of course, you can save the file, burn it on a CD and send it.

    Then double click on the file from the CD will run automatically the installation.

  • Have HP Photosmart b110 all in one series connected to my pc wireless, but it will not be printed

    Hi I have a series of all-in-one hp photosmart b110 it is connected to my wireless pc but it wont print I tried for days now, please can anyone help thanks

    Hi pauloldfield

    1. do you have the updated drivers installed for the printer?
    2. do you receive error messages when you try to print?
    3. What is the exact model of the printer number?

     

    You can check the links below and check out them if the steps to help you resolve the issue-

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows?T1=tab04


    You can also check the below link to get the latest drivers for the printer according to the model and verification number.

    http://WWW8.HP.com/th/en/support-drivers.html

     

    I hope this helps.

  • How to install my printer hp photosmart c4485 all-in-one on laptop with the windows operating system 7

    HP photosmart c 4485 all-in-one stopped printing in color, tried new cartridge, but still the same, uninstalled the thought of hp

    Just reinstall, no disc compatible windows 7

    Hello t_mccluskey

    You can find the driver for the Photosmart C4485 on the link below. If the color does not continue to print, try the second link for troubleshooting print quality. Let me know if you encounter any problems or the problem persists.

    Photosmart C4485 software (Windows 7)

    Missing, faded or dull colors

  • HP Photosmart C4700 all-in - One series Printer will not reinstall

    Hello.  I have a HP C4700 all-in - One Printer.  I don't have literal no computer knowledge.  We have installed a new router that came with a password so I had to change all the devices.  The printer is offline.  I tried to fix it as said.  No options as they said came.  Told me to uninstall it and install.  I tried.  The disc comes only with output.  I thought that I uninstalled the printer, but it is still on the list.  I emptied the trash and restarted the laptop.  I use the wireless printer.  I don't know what to do.  I don't want to continue unistalling programs and uninstall something important to the laptop.  Its a good laptop.  Fear and need assistance please.

    Hi @HPBearLax,

    In my previous post, I've linked documents that offer instructions on how to set up you wireless printer. This includes instructions on how to move from a USB connection to a wireless connection, as well as some Wi - Fi troubleshooting steps.

    Please try these steps and let me know if you are able to connect up your wireless network.

  • Printer HP Photosmart C6150 all-in-One. The Error Message ink system failure, error: 0xc18a0001

    I have a HP; hotosmart C6150 all-in-One printer. My magenta ink cartridge ran out of ink. Several days passed and I would like to select print using only black ink cartridge. Now my printer has stopped working. I now get the message ink system failure, error: 0xc18a0001. Just in from a new cartridge HP magenta ink and installed but I keep getting the consignment: ink system failure, error: 0xc18a0001. How can I get my printer working again?

    [Personal information]

    The printer service: to replace. If it's under warranty we achieve for you if you call 1800-474-6836. If you are not in the warranty, we offer a few solutions for you. We always have available agents. Please call anytime.

    When a solution is found, please indicate the position that solves your problem.

    If I have solved your problem, please do not hesitate to provide laurels and make sure that you mark this thread as provided solution!
    Although I work for HP, my messages and responses are my own opinion and not of HP

Maybe you are looking for