installation quick error when creating the control file
Hai all,
I have faced the problem when im installing fresh ebs R12
my environment:
Sun sparc 64-bit
Solaris 11
This happens when I try to install R12 charge
rapidwiz, the error ORA-00821 say: sga_target 1024M value is too small, must be at least 2100 m
and when you create it control file does not,
no idea is that with this problem?
all prior references to doc:
R12.1.1: Oracle eBusiness Suite Installation and Notes version upgrade 12 (12.1.1) for Oracle Solaris on SPARC (64-bit) (Doc ID 761568.1()
the journal of details below
Logfile located at /oracle/PROD/db/tech_st/11.1.0/appsutil/log/PROD_SMJKT-PRFND01/ApplyDatabase_11071358.log
^ M
| 0% complete ^ M
/ 0% completed ^ M
-0% complete ^ M
------0% complete RC-50004: Fatal: error in ApplyDatabase:
Creating control files is not
Cannot run configuration database using RapidClone
RW-50010: error:-script returned an error: 1
RW-50004: Error Code when you run the external process. Check the log file for more details.
Install the driver database for the PROD instance running
Connect to an instance is idle.
ORACLE instance stops.
Connect to an instance is idle.
ORA-00821: sga_target 1024M value is too small, must be at least 2100 m
ORA-01078: failure in the treatment of system settings
CREATE CONTROLFILE REUSE SET DATABASE "PROD".
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
ALTER database open resetlogs
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
Hello
Please consult the following notes, because it deals with workarounds:
R12.1.1: Oracle eBusiness Suite Installation and upgrade version Notes 12 (12.1.1) for Oracle Solaris on SPARC (64-bit) (Doc ID 761568.1)
See article: known issues
and
ORA-00821 during create Controlfile in the ApplyDatabase Phase of the R12.1.1 Installation on Solaris (Doc ID 1116525.1)
HTH!
Thank you &
Best regards
Tags: Oracle Applications
Similar Questions
-
There was an error in creating the temporary file
(Signature) certificate not saved to the file, as says the answer "there was an error in creating the temporary file. Opening of the applied wa file says which no valid signing certificate.
When the file has been saved to a local drive, the certificate has been accepted...
-
Installer was unable to create the directory/file error 44
Hi all
I get this error when you try to download / install creative cloud set up.
I ran the OOBE folder... renowned cc cleaning tool, was the game under admin and etc.
Any suggestions?
Thank you
09/04/16 10:40:08:546. [INFO] | | USS | PIM | PIM | | | 4188. At the END: Application Download
09/04/16 10:40:08:551. [INFO] | | USS | PIM | PIM | | | 4188. Create PIM instance for path: C:\Program Files (x 86) \Common Files\Adobe\OOBE\PDApp
09/04/16 10:40:08:551. [FATAL] | | USS | PIM | PIM | | | 4188. Error could not create directory for PIM: C:\Program Files (x 86) \Common Files\Adobe\OOBE\PDApp
09/04/16 10:40:08:551. [ERROR] | | USS | PIM | PIM | | | 4188. END: Cannot create the LibRef PIM_PATH_TYPE_AAM 44
09/04/16 10:40:08:825. [INFO] | | USS | PIM | PIM | | | 4188. Has been properly deleted the temp guid directory
09/04/16 10:47:49:754. [INFO] | | USS | PIM | PIM | | | 9008. Build Version - 3.6.0.248
09/04/16 10:47:49:754. [INFO] | | USS | PIM | PIM | | | 9008. Exploitation forest verbosity level set to 4
09/04/16 10:47:49:754. [ERROR] | | USS | PIM | PIM | | | 9008. markerFilePath C:\Users\shawn\AppData\Local\Temp\asu.trace
09/04/16 10:47:49:754. [INFO] | | USS | PIM | PIM | | | 9008. From workflow to update
09/04/16 10:47:49:808. [INFO] | | USS | PIM | PIM | | | 9008. PIMSqlite closeDB status 0
09/04/16 10:47:49:808. [INFO] | | USS | PIM | PIM | | | 9008. PIMSqlite closeDB status 0
09/04/16 10:47:49:808. [INFO] | | USS | PIM | PIM | | | 9008. PIMSqlite closeDB status 0
09/04/16 10:47:49:808. [WARNING] | | USS | PIM | PIM | | | 9008. Try to close ACC if running
09/04/16 10:47:49:970. [INFO] | | USS | PIM | PIM | | | 9008. 0 process killed since C:\Program Files (x 86) \Adobe\Adobe creative cloud
09/04/16 10:47:50:071. [INFO] | | USS | PIM | PIM | | | 9008. 0 process killed since C:\Program Files (x 86) \Common Files\Adobe\Adobe Common Desktop
09/04/16 10:47:50:186. [INFO] | | USS | PIM | PIM | | | 9008. 0 process killed since C:\Program Files (x 86) \Common Files\Adobe\OOBE\PDApp
09/04/16 10:47:50:271. [INFO] | | USS | PIM | PIM | | | 9008. START: Download Application
If please share OS version and the version of the creative cloud that you use, so that we can help you accordingly. In the meantime, try the steps mentioned on: code 43 error when you install Adobe Creative Cloud
-
Hi gurus! Need help
I lost all my files control + I want to rename my database from testrman to ntstrman. But I get an error
ORA 01503 creates command file failed
ORA 01160 file is not a daatafile
dataf file is ' / oradata/ntstrman/temp01.dbf'
Won't please watch throw you and tell me what I'm doing wrong? Thank you.
create_control. SQL:
create controlfile set database ntstrman
RESETLOGS
maxLogFiles 50
maxlogmembers 3
MAXLOGHISTORY 400
MAXDATAFILES 200
MaxInstances 6
ARCHIVELOG
logfile
Group 1 ('/ oradata/ntstrman/redo01.log'),
Group 2 ('/ oradata/ntstrman/redo02.log'),
Group 3 ('/ oradata/ntstrman/redo03.log')
data file
' / oradata/ntstrman/sysaux01.dbf',
' / oradata/ntstrman/system01.dbf',
' / oradata/ntstrman/temp01.dbf',
' / oradata/ntstrman/undotbs01.dbf',
' / oradata/ntstrman/users01.dbf'
;
initntstrman.ora:
testrman.__db_cache_size = 92274688
ntstrman.__db_cache_size = 100663296
testrman.__java_pool_size = 4194304
testrman.__large_pool_size = 4194304
ntstrman.__large_pool_size = 4194304
testrman.__shared_pool_size = 62914560
ntstrman.__shared_pool_size = 54525952
testrman.__streams_pool_size = 0
*.audit_file_dest='/oradata/Admin/ntstrman/adump '
*.background_dump_dest='/oradata/Admin/ntstrman/bdump '
* full = '10.2.0.3.0'
*.control_files='/oradata/ntstrman/control01.ctl','/oradata/ntstrman/control02.ctl','/oradata/ntstrman/control03.ctl'
*.core_dump_dest='/oradata/Admin/ntstrman/cdump '
* .db_block_size = 8192
* .db_domain = "
* .db_file_multiblock_read_count = 16
* .db_name = "ntstrman".
* .db_recovery_file_dest = "/ oradata/flash_recovery_area.
* .db_recovery_file_dest_size = 2147483648
*. Dispatchers ='(Protocol=TCP) (SERVICE = ntstramnXDB)"
* .job_queue_processes = 10
* .open_cursors = 300
* .pga_aggregate_target = 16777216
* runoff = 150
* .remote_login_passwordfile = "EXCLUSIVE."
* .sga_target = 167772160
* .undo_management = "AUTO".
* .undo_tablespace = "UNDOTBS1.
*.user_dump_dest='/oradata/Admin/ntstrman/udump '
Published by: Junior Oracle DBA on October 20, 2008 15:37This is because ' / oradata/ntstrman/temp01.dbf' is a temporary file not a data file, remove the reference to it and try again. When your database is open, you can add the temporary file in your temp tablespace with ALTER TABLESPACE TEMP ADD TEMPFILE ' / oradata/ntstrman/temp01.dbf'...
HTH
Enrique
-
'Error when accessing the preference files' - no preference files not created
This is similar to another recent problem. I get two error messages when you attempt to start the AE:
When I go to users > library > preferences > adobe > consequences, that's what I see:
It seems that AE did not create folders for the last update? The my computer for missing files search turns up no results. AE uninstalling and reinstalling does not solve the problem.
Please visit this link.
How to display the folder ~/Library Mavericks and Yosemite. Macworld
After completing the information on the link, the problem persists. And after all sorts of solutions, I just deleted the folder 13.8 and the AE iniciates perfectly.
-
Error at line 1: ORA-01503: creating the control file has no
Hello
I do disaster when I create controlfile by trace, I got an error
CREATE CONTROLFILE SEt DATABASE 'test' RESETLOGS ARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 2
MAXDATAFILES 30
MAXINSTANCES 1
MAXLOGHISTORY 292
LOGFILE
GROUP 1 ' / test/opt/102/oradata/test/redo1.log' 100M, SIZE
GROUP 2 ' / test/opt/102/oradata/test/redo2.log' 100M, SIZE
GROUP 3 ' / test/opt/102/oradata/test/redo3.log' SIZE 100 m
DATA FILE
' / test/opt/102/oradata/test/system.dbf',
' / test/opt/102/oradata/test/undotbs1.dbf',
' / test/opt/102/oradata/test/sysaux.dbf',
' / test/opt/102/oradata/test/users01.dbf'
CHARACTER SET WE8ISO8859P1
;
CREATE CONTROLFILE SEt DATABASE 'test' RESETLOGS ARCHIVELOG
*
ERROR on line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01565: error in the identification of file ' / test/opt/102/oradata/test/system.dbf'
ORA-27037: unable to get file status
Linux-x86_64 error: 2: no such file or directory
Additional information: 3
I wrote something wrong?
Thank youI understand, but I couldnot restoration l datafile by rman restore command coz base not at the stage of editing!
Appear you are not using the rman backup catalog and controlfile to help register rman backup.
in this case if you recreate the controlfile to way you will lose all your information backup of controlfile.
better restore controlfile from piece of backup or AutoSave. as restore controlfile from "" -
How can I specify location of the control file when the manual creation of DB?
DB version: 11.2.0.4
OS: Oracle Linux 6.6
The CREATE DATABASE command creates the control file.
CREATE DATABASE command is executed once you start the instance in NOMOUNT State as shown below.
SQL > startup nomount pfile=$ORACLE_HOME/dbs/initBRCPRD.ora
SQL > create database 'BRCPRD '.
MaxInstances 32
MAXLOGHISTORY 1
maxLogFiles 192
maxlogmembers 3
..
.
.
< snipped >
When you create the database manually, we can define the control_files parameter in the init.ora as below and control file will be created at this location. Right?
control_files = ("" / u01/oradata/BRCPRD/BRCPRD_control01.ctl","/u01/oradata/BRCPRD/BRCPRD_control02.ctl "")
When I was generating the DB using DBCA GUI creation scripts, it asks to enter the location of the Online redo logs and control files.
I entered my desired location. But, I couldn't find CONTROL_FILES parameter in the init.ora file generated the DBCA. This is why I got confused. I think that DBCA is internally somehow. So thought I'd post it here.
Hi John, OP
Just checked the init.ora file created by DBCA. Although the parameter CONTROL_FILES is undefined, db_create_file_dest = '+ DATA_DG1' was created. OMF default location is defined by the db_create_file_dest parameter.
So, I could safely use this script for the manual creation of DB, and during the CREATE DATABASE command execution, oracle will place CONTROL_FILES + DATA_DG1 using the format;
+DiskGroup/dbname/filetype/filetypetag.file.incarnation
-
Creation of the control file has no
Hi all
When I am creating the control file my terminal is suspended on the next step
SQL > @/u02/ORACLE/orcldb/9.2.0/dbs/contrl.sql
ORACLE instance started.
Total System Global Area 581506668 bytes
Bytes of size 452204 fixed
402653184 variable size bytes
167772160 of database buffers bytes
Redo buffers 10629120 bytes
54
and in the log file alert receive no errorHi, Frank.
Very nice work Helios (as usual).
Thank you, I share just what I know thatsall
Thank you, I learned something new today.
The same for all users of the forum
Normally, I clone cold backups so I don't need to manually create the controlfile.
I see that your solution is contained in the following note;
"Cloning of Oracle Application 11i with rapid Clone /R12 - database (9i/10 g / 11 g) using on Open Database [ID 760772.1] hot backup.You are correct, we mainly use this method for hot backup-Section advance clonning
But I'm still curious to know if Nicolas is to create a clone of a hot backup or a backup to cold, and why he uses the 'ARCHIVELOG' option on his clone.
It depends, for me I prefer to choose option NOARCHIVELOG and NORESETLOG
Please check:
http://download.Oracle.com/docs/CD/B19306_01/server.102/b14200/statements_5003.htmRespect of
HELIOS -
Adobe booth 7.1 on Win7 32 bit, 4 GB of ram - when creating a pdf file, that he was very quickly now that is very, very slowly, at 53 seconds of 8 pages. We scan many documents and this slows us down. I tried another directory, clean the current directory, remove other programs that have been added and stopped scanning of Kaspersky. Any help would be greatly appreciated
Assuming that you are talking about Adobe Acrobat 7 Standard, it is far from being compatible with Windows 7, if problems are to be expected.
The first version which has been is 9.2, if I remember correctly.
-
I just bought, installed and registered 6 Lightroom. When I try to launch the product I get a message that says "an internal error has occurred" - could not create the required file: admin/Users / / Library/Application Support/Adobe/Lightroom/Filter Presets. Any ideas on how I can fix this?
Hi Anthony,.
You must go to the location: admin/Users / / Library/Application Support/Adobe/Lightroom
Hold down the CTRL key and click on Lightroom, click on read the information and click the permissions tab.
Provide the permissions to read and write to your identifier and then close.
Then reopen Lightroom. You should be able to open Lightroom.
Please let us know if it helps.
Kind regards
Tanuj
-
Problem to identify the control file when creating physical standby
Hello
(database version: 10.2.0.4)
linux platform)
I use the command below to create physical database from a backup before:
I already tried to cross but always give same errorrman target / auxiliary sys/tiger@paceview Recovery Manager: Release 10.2.0.4.0 - Production on Tue Sep 4 18:05:53 2012 Copyright (c) 1982, 2007, Oracle. All rights reserved. connected to target database: PACEVIEW (DBID=2092349485) connected to auxiliary database: PACEVIEW (not mounted) run { allocate auxiliary channel c1 device type DISK; set until sequence 38; duplicate target database for standby dorecover nofilenamecheck; } released channel: ORA_DISK_1 allocated channel: c1 channel c1: sid=35 devtype=DISK allocated channel: c2 channel c2: sid=36 devtype=DISK executing command: SET until clause Starting Duplicate Db at 04-SEP-12 contents of Memory Script: { set until scn 138180211934; restore clone standby controlfile; sql clone 'alter database mount standby database'; } executing Memory Script executing command: SET until clause Starting restore at 04-SEP-12 channel c1: restoring control file ORA-19625: error identifying file /backup/rman/paceview/DEL1_standby.ctl ORA-27037: unable to obtain file status Linux-x86_64 Error: 2: No such file or directory Additional information: 3 ORA-19600: input file is control file (/backup/rman/paceview/DEL1_standby.ctl) ORA-19601: output file is control file (/PGHProdDB/oradata/paceview/control1.ctl) failover to previous backup released channel: c1 released channel: c2 RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03002: failure of Duplicate Db command at 09/04/2012 18:01:44 RMAN-03015: error occurred in stored script Memory Script RMAN-06026: some targets not found - aborting restore RMAN-06024: no backup or copy of the control file found to restore
Thank youHello;
That's what I'd do:
Primary backup (change in your directory as needed)
RMAN RUN { allocate channel d1 type disk; backup format '/u01/backups/PRIMARY/df_t%t_s%s_p%p' database; sql 'alter system archive log current'; backup format '/u01/backups/PRIMARY/al_t%t_s%s_p%p' archivelog all; backup current controlfile for standby format '/u01/backups/PRIMARY/sb_t%t_s%s_p%p'; release channel d1; }
Move the backup and duplicate like this:
rman target sys/password@PRIMARY auxiliary / RMAN> run { allocate channel C1 device type disk; allocate auxiliary channel C2 device type disk; duplicate target database for standby nofilenamecheck; }
For details of this method, see:
http://www.Visi.com/~mseberg/duprman2.html
Best regards
mseberg
-
Separated from this thread.
My phone displays an error message on the startup file and it mentions the installation media, how can I solve this problem?
Hello
See if that helps you.
Do a Safe Mode system restore to before the problem started.
http://bertk.MVPs.org/html/restoresysv.html
How to access Safe Mode
http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft
Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.
Here is the guide to repair Options using a Vista DVD from Microsoft.
If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.
http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/
Table of contents
- Overview of Windows Vista repair options
- How to perform an automatic repair of Windows Vista using Startup Repair
- Advanced Tools Overview
- Conclusion
If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.
Unfortunately, you have to buy it.
Here is a link to it:
http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
There are several methods to reinstall Vista.
This can help you (download files and make your own DVDs):
http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links
And here are instructions on how to burn ISO disk images:
http://www.SnapFiles.com/get/isorecorder.html
The download links and information on how to make the ISO file, and then create the Setup DVD above are at this link:
"How to download a Vista ISO and create a Setup DVD or USB"
http://www.Vistax64.com/tutorials/301852-Vista-ISO-download-create-installation-DVD-USB.html
"How to create a USB of Vista Installation key '
http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html
___________________________________
You can contact your computer manufacturer and ask them to send you a set of recovery disks.
They should do this for a small fee.
To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:
You need to change the Boot order to make the DVD/CD drive 1st in the boot order:
How to change the Boot order in BIOS:
http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm
"How to replace Microsoft software or hardware, order service packs and replace product manuals.
http://support.Microsoft.com/kb/326246
___________________________________
And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.
The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)
Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.
Them or us ask the right sequence of key.
___________________________________
Some manufacturers have more available Vista recovery disks.
If this happens, you may need to try this instead:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
-
R12 rapidwiz error on node2 - AC-00002: error: unable to create the log file
Over multiple node R12 on Enterprise Linux 4 installation fees. below error is encountered on node2
AC-00002: error: unable to create the log file
The installation was successful on the database node and the main node of the Application. On the primary Application node only ' lot
Treatment services are enabled.
However, when installing on the application additional node the rapidwiz is errors
"AC-00002: error: unable to create the log file - $INST_TOP/$CONTEXT_NAME/logs/12202114.log.
Exception in thread "AWT-EventQueue-0" java.lang.RuntimeException: AC-00002: unable to create the log file.
$INST_TOP/$CONTEXT_NAME/logs/12202114.log
I tried to install several times but every time it failed with the same message
I think that the reason for the failure:
I am writing on a mounted NFS on Node2. If I access a NFS mount from one server other than of its origin, the root of the application server user is considered person not the user.
I checked this by pressing a file being logged in as root:
-rw - r - r - 1 person person 0 20 Dec 10:59 abc
I mounted node2 successfully using
Mount-t nfs nas1: / erparch /erparch
Rapidwiz version is 12.0.0.20
What are the steps to take in order to proceed with the installation on the second node.user10126380 wrote:
I think that the reason for the failure:I am writing on a mounted NFS on Node2. If I access a NFS mount from one server other than of its origin, the root of the application server user is considered person not the user.
I checked this by pressing a file being logged in as root:-rw - r - r - 1 person person 0 20 Dec 10:59 abc
I think you've correctly identified the source of your problem. By default, the NFS mounts are usually created with the 'root_squash' option, where the user root on a remote system creates its files as the anonymous user ('nobody' in most cases) on the exported NFS volume. It is usually a good practical security; However, in your case, you need to export the NFS volume with no_root_squash to allow the user root on Node2 to create files as expected when you run RapidWiz. Once installation is complete, you should be able to go back to using the default root_squash option, as the following files in the filesystem level of demand will be created by non-root users.
Your system administrators may not be happy with the idea of an export of no_root_squash, and I wouldn't blame them. :-) If there is dispute, make sure that they understand that it is only for the duration of the installation of the EBS, and she can (and should) be powered once the installation is complete and verified to work.
These two articles offer a brief explanation of the purpose and value of the NFS mount root_squash/no_root_squash export options.
Kind regards
John P.
http://only4left.jpiwowar.comPublished by: jpiwowar on December 21, 2009 21:38
-
ODI-40837 ERROR: an error occurred when creating the schema
Hi I'm testing a file xml server and receive the following error message.
ODI-40837 ERROR: an error occurred when creating the schema: ODI-40738: SAXException has been surprised by reading the model saying: expected 'DOCTYPE '.
JDBC URL jdbc:snps:xml?f=C:/Projects/prd.xml & ro = true & DOD = YES
could someone help because I can not find any blog or documentation on this error?
Thank you
Published by: user626688 on May 31, 2013 13:26There seems to be a problem with your xml file. Please work with channel support to investigate this issue.
You can also view the details of settings xml driver to http://docs.oracle.com/cd/E28280_01/integrate.1111/e12644/appendix_xml_driver.htm#CHDECBHH -
CS6 Illiustrator crashes when you create the new file
Hello.
I'm using windows 7 x 64. And I installed the two Illiustrators x 64 and x 32. I open the Illiustrator but when I try to create the new file Illiustrator stop working.
Windows 7 Hompe premium x 64
processor i3 4x2.93
RAM: 4 GB
network with printers
error reaport
Hi Philippe,.
We are really sorry for all the inconveniences that made you.
Try the following steps to check the issue.
1 try resetting preferences
Press Ctrl-Alt-Shift on PC as soon as you click on the Illustratir icon to reset the preferences to the default settings.
2. If this help not try to remove all printers from the system one & check.
3. in addition, you can try to set the boot system & check if still HAVE plant if you try to create a file.
At the same time if these steps does not resolve your problems you can contact Adobe support by following the link below:
http://helpx.Adobe.com/contact/
Thank you
Florian
Maybe you are looking for
-
How can I change my password for MSN Premium? Follow the online does not work.
I have followed cdarefully directions Microsoft online several times, for example, I typed my password (it should be correct - I am online with it) once, typed the new password twice and click on enter sometimes and continue a few times. The program
-
Unable to play a game installed, DRACULA's ORIGIN. Frustrated & need help.
Hello! I downloaded a game and it won't let me play. A message never ceases to appear saying "insufficient privileges; You must be an administrator to run this application for the first time. "It's been downloaded on another computer and does not say
-
error code when you install an important update
I have an update to download important for microsoft 2010 and every time I have try to install that I can't, it always gives me an error code and I try again and again and it will not always install so what am I, I guess what to do? Ive tried to remo
-
No site Ichain will now load with IE9 and Norton360 since April
I have Norton 360 and IE9 and since late April, I can't connect to my Citrix using IE9 works, I can also not connect to my web mail works them both use Novell Ichain, sites just don't load up, so I don't not even for login pages, all other internet j
-
Printer icon stuck in the system tray.
I have the printer icon stuck in my system tray. It will only display when it was actively printing a document. Now, this is where all the time. When I switch on it shows 1 document waiting, but when I click on "open all active documents print" it