installation, upgrades

Similar Questions

• Error code 43 - installation upgrade failed

  Error code 43 - installation upgrade failed

  Hi ThinkRed,

  Please check if your creative Application of the clouds is up-to-date.

  Concerning

  Sonam

• Installation/upgrade error!

  Current version: 6.16.0.105

  Window 7 Ultimate 64 Bit

  I get errors during the last Upgrade. Also tried installing standallone but the error messages are attached

  Any help?

  Thank you

  

  Try to clear any version currently installed by using this MS Fix It:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/en

  If that still does not help, then try this:

  http://community.Skype.com/T5/Windows-desktop-client/impossible-to-install-v6-13-0-104-error-1603/m-...

  Be aware that if you want to install the 6.18.0.106 currently the latest version, then you must use this msi installer link in order to extract the Skype.exe and Login.cab files:

  http://download.Skype.com/MSI/SkypeSetup_6.18.0.106.msi

• Installation upgrade memory in the new laptop (E8730w)

  I just got my new laptop and was dismayed to see that I obviously have to install the 2 GB memory upgrade that I ordered.  When I'm ready to install it, I will contact HP technical support.  I'm interested in the big picture right now.  The laptop has installed Windows Xp and Vista, stored on the hard drive.  No matter if I use the new laptop for, say, from the user's manual before as I have added additional memory, or is it better not to use the laptop until I have all of the memory (2 GB original and 2 GB upgrade) in place.  I hope that this process will be no more complicated than to install an ethernet card in a years office 5 or 6.  Where can I get good screwdriver to open the module compartment memory?  From my experience, it is easy band, the head of a screw phillips, especially a small head, if there is no appropriate screwdriver.  I'd appreciate any idea on these issues.

  I don't think that no matter how long you use it before you install the memory. Regarding the screwdriver, I use a 41678 artisan to work on laptops with screws Phillips. It could cost $ 1.69 at any Sears and any tech tools for perhaps $15 will be a very similar small Phillips. You will know if you are stripping it, so stop everything. Memory installation is much easier than to put a PCI on a desk. Relax its all good.

• Dell M620 (VRTX) blade - ESXi 5.1.0 Update 1 installation upgrade to ESXi 5.1.0 Update 3 (latest)

  This morning I did an installation of upgrade to ESXi 5.1.0 Update 1 to ESXi 5.1.0 Update 3 (latest Version) on one of the blades of my VRTX M620 three 3.  I have the same problem that I met about a year, when I tried to update 1-2 update.  I had to go down to 1 update to see the data store.

  With update 3, the data store does not appear on this blade.  I did a scan to see if the data store is present, but he did not.  Also, I restarted the blade which did not help.

  I have to keep upgrading to 3 update due to the necessary correction of problem CBT.

  How to troubleshoot and resolve this problem of my data store does not?

  Note: I have very little experience with virtualization.  I just found today on how to access the interface from the CLI of blades.

  Thanks in advance.

  SOLVED.

  The original sas megaraid drivers (even installed on the blades of M620 Dell) had to be installed.  It is my understanding that several versions of the megaraid sas driver provided on the Dell ESXi ISO are meant to satisfy the VMware HCL for this material.  However, the more recent does not show the data store.

• Installation upgrade of Windows 8 stuck to customize screen

  I use a MacBook Air model mid-2013 Haswell.

  13-inch: 256 GB

  • Processor 1.3 GHz dual-core Intel Core i5
  • Turbo Boost up to 2.6 GHz
  • Intel HD 5000 graphics card
  • 4 GB memory
  • 256 GB of flash storage
  • I installed Windows 7 Home Premium with Boot Camp and that you have installed all the drivers. I then upgraded to Windows 7 Windows 8 Pro, because I have a upgrade key and cannot do a clean install. I tried the upgrade of the installer itself, since a 2 USB and flash USB 3 and also a DVD drive. The installation will run normally and it will start in Windows 8.

  But when customize installation reaches the screen, my trackpad and keyboard no longer respond. I tried to plug my USB keyboard and mouse, but they do not work either. I have no choice that to restart the Mac, and when I start Windows again, he tells me the installation of Windows 8 has failed and it will now roll back to Windows 7. So, I'm at square one.
  I'd appreciate any help I can get. Thank you!
  SOLVED!

  Yay, I finally installed Windows 8 successfully!

  Here's what I did:
  Instead of install Windows 8 from the file ISO of Windows 8 on Windows 7, I started in Mac OS X and launched Boot Camp Assistant.
  From there I chose the ISO image of Windows copy on a USB key. Then, I chose the image ISO of Windows 8, after I copied on my Mac partition. Then he did his magic, and I found myself with a USB drived called WININSTALL.
  Then I booted to Windows 7, has opened the window of the USB drive and launch the setup.exe
  Voila! Windows 8! With the Apple's Boot Camp drivers installed automatically as well.

• Is Installer-upgrade just make the server? What shell hyperic?

  I installed the Server 3.0 to 3.1 hyperic
  
  I downloaded hyperic-hq-installer-3.1.0-439-amd64-linux.tgz and made a
  tar - xvzf hyperic-hq-installer-3.1.0-439-amd64-linux.tgz.
  
  I then /opt/hyperic/hq/hyperic-hq-installer/setup.sh-mise to level. This upgrade of the server
  Would I able to use this Setup program to upgrade the agent also. HOW?
  I downloaded the agent only and all installed package, but I was wondering if I should?
  
  Also how to pass shell hyperic?  Would I could again use the--upgrade
  with other options to include the agent and the shell
  
  I don't see any mention upgrade documentation to specify anything except - upgrade
  
  I returned and used the setup.sh - full and just choose the hull of HQ to install the new shell. Again could I have updated it with the hyperic-hq-installer-3.1.0-439-amd64-linux.tgz file Setup?

  Hi Mike,.

  A note: this has been asked several times. In the future, please see the docs - http://support.hyperic.com/ - and research first on this forum.

  As a reminder, the "-upgrade ' flag is for the server. 'Improve' agent and the shell (really, you're just replacing the whole directory) run setup.sh and install the agent and the shell. The beam of the agent does not have the shell, you must use the installation for this package.

  -John Mark

• Installation upgrade w/o original S/N.

  My MAC is dead. I replaced it. I have re-installed Creative Suite 3 from CD I own. The CDs are the upgraded version. I can't find the version of the original software that I applied the update. What are my options?

  I looked in 'My orders' and found no separate perchase.

  No numbers, no upgrade installation. It is that easy. If you do not have written them elsewhere or they are not registered on your account, you are FUBARd.

  Mylenium

• Installation upgrade LR4.1. There is nothing to click to select "select destination". Help!

  Hi - I'm LR4.1 upgrade installation on my Mac. In "select destination" there is nothing to click to select the destination. Help!

  Thank you.

  Laurie

  Hi - I thought about it. There was the box "accept" hidden in the background and when I tried it again that popped and I was good to go! Thanks again for your help!

  Laurie :)

• Catalyst CS5 installation upgrade problem

  I bought the CS5 Master Collection upgrade because I wanted to get the full Version of CS5 Flash Catalyst. I already had the beta version of Flash Catalyst on my computer. Before installing the CS5 upgrade, I dumped my beta version of Flash Catalyst in the Recycle Bin and emptied the Recycle Bin.

  When the choice of products to install with the installation of CS5, I not give me the option to install Flash Catalyst CS5 (there is a red x next to this option and it said "a preliminary version of the product is already installed") even if a search for remnants of the previous BETA version cannot be found.

  I stopped and restarted the computer. and I spoke with technical advisers Adobe in India (or anywhere) for an hour... This situation wasn't in their reference to which they referred to repeatedly without success, so I was told that I have to send by e-mail Adobe from the internet.

  Talk to someone across the world is bad enough, but when the people of the India or Bora Bora, or elsewhere, to put you on hold while they refer to their references for an hour then can not help you and you say should send an email to a more competent to support level, it's even more frustrating. In addition, duty e-mail to a more appropriate level of technical support, even if I had just spent more than $1,000 on an UPGRADE, is more outrageous.

  I hope that Adobe will my installation of Adobe Flash Catalyst CS5 soon. But in the meantime, If anyone has had this problem?

  I am:

  Elizabeth Wallace

  716-572-3981.

  [email protected]

  This issue is addressed in the FAQ to this post. See if it works for you. You'll want to remove all previous Flash catalyst installations.

  All Adobe products have their own uninstall script, so you will want to run that, instead of simply drag the program folder to the trash.

  -Bear

• Installation upgrade value package

  Belatedly, for various reasons (mainly the uncertainty and concern that I would mess up the computer at an inopportune time), I have round for a second attempt to install the published Package value update January 9, 2008 (with various other latest driver updates to install when I did). I used "Add and remove programs" to remove the old Toshiba Value Package added, cleaned the registry with CCleaner (as advised) - and ultimately all other registry cleaners that I had accumulated on the system! - but was always an error message that a version of the software was already installed and needed to be removed before installation could go forward.

  Look further at the description of the package and the Toshiba software included in the "All programs" list, it seems that I could use as utility uninstal Toshiba. Is this correct? Y at - it another software, I have to uninstall to allow added value package of January to install successfully?

  And finally, I was confused when I unzipped the files and found that there was a 'setup.exe' and 'toshiba Value Added... '. "I wasn't sure to click on--but found that both led to the injunction and there was another version on the disc that I first need to uninstall.

  I guess what I really need, it's a "guide of l'idiot" installation of Toshiba driver updates: can anyone point me in the direction of one?

  (Currently I used "System Restore" to get us back in where he was this morning before that I started trying to mess around with it).

  Sorry, but boyfriend is stupid enough to discuss issues and don't know even what model of laptop you have. How to check the download file? Sorry, but this long number of zip file doesn't tell me much. Should we check out to 10 different models to see if the number corresponding to your one?

  For example, VAP for my machine is vap-20080428124906.

  Anyway, I removed VAP repeatedly on different laptops models and after restart I managed to install the most recent version available on the Toshiba support page. So now I wonder how I can do this and you do not. And please tell me who told you it work on cleaning the registry with CCleaner (as advised)? It is certainly not necessary to do so.

• Acrobat 8 or 9 with Windows 7 64 bit - printing issue: new installation, upgrade to Vista.

  Acrobat does not print using the PDF Converter.  I can print a PDF file on a conventional printer (not), but when you use printing > Adobe PDF as the printer selected, nothing happens. As a result, cannot make PDFs of web pages etc.  There is a problem reported by the AdobePDF.dll_64, during the installation.  I downloaded that separately and reached a complete reinstallation of 8 from Adobe, which previously worked perfectly on Vista.

  Try this first: http://www.sevenforums.com/software/2092-adobe-cs4-under-7-x64-pdf-printer.html

  Error "the file AdobePDF.dll is needed..." "When you install Creative Suite 3 on 64-bit (Windows 7 64-bit) Windows Solution

  Manually extract the 'adobepdf.dll_64 ' of the file data1.cab file before installing Acrobat. When the prompt appears, navigate to this file and select it.

  1. Navigate to the folder that contains the file setup.exe to your installation of Acrobat 8.
  2. Locate the file "data1.cab" and open it (this may require a third-party compression utility, such as WinZip).
  3. Inside the content list, locate the file "adobepdf.dll_64" and copy it to your desktop.
  4. Run the program setup.exe installation and when the prompt appears, select Browse and select the file that you copied to the desktop.
     Note: If the file cannot be selected, change the file type drown down in the dialog box to "All files", or rename the file "adobepdf.dll" by removing "_64" from the end of the file extension.

  http://kb2.Adobe.com/CPS/401/kb401731.html

  More information

  Because the Adobe PDF printer is not supported on 64-bit operating systems, version 64 bits of the AdobePDF.dll does not get extracted during installation. So, the installation program is unable to locate him. Although Acrobat is installed, the Adobe PDF printer will not install. Following the update procedure above will address the issue.

  333360 : support policy for Adobe Acrobat (8.0.x Windows x 64)
  333780 : support policy for Acrobat 7 and 8 on Windows Vista

  Questions about installing Windows 7? Read this:
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Windows7 and Installation/upgrade issues updated Itunes: HKEY errors

  I am running on a new laptop with Windows7 64 - bit OS.  I have already installed Itunes v9.0.3.15 on this computer, but when I open Itunes I got the following error:

  "Warning.  ITunes has not been installed correctly.  If you want iTunes to be able to retrieve information from the internet CD, you should reinstall iTunes. »

  Very well, but every time that I try to uninstall or update Itunes by installing the latest version, I get the following error at halfway through the installation process, on which the installation rolls back immediately and I'm stuck:

  «Could not open key: HKEY_Local_Machine32\software\classes\.pcast.»  Check that you have sufficient access to that key or contact your support team. » 

  I've looked everywhere.  I saw a lot of similar questions, but none exactly the same thing on other forums, and no resolution to other questions helped.

  I don't have this key in my registry editor because it is a 64-bit OS, so there is no "HKEY_Local_Machine32" only "HKEY_Local_Machine."  I have ensured that I do infact have full access to the 'HKEY_Local_Machine\software\classes\.pcast' , but the installation/uninstallation process is looking for the machine32 key.  NOTE: I am trying to install the 64-bit version of Itunes.

  The itunes forums have not proven useful.  If anyone has experience/solved this problem, I would certainly appreciate any suggestions.

  
  

  Hi bburkhart,

  To register permission number, install and run SubInACL to your computer to fix the permission issues.

  You can get the download here:

  SubInACL (SubInACL.exe)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en

  This seems to have helped others facing a similar question.

  See this for example:

  iTunes 9 install on Windows 7 64 bit

  http://discussions.Apple.com/thread.jspa?threadID=2153424

  That should do the fix.

  Before you run the SubInACL tool, please make sure that you take a backup of your registry and also create a restore point.

  Here are the links for your reference.

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Create a restore point
  http://Windows.Microsoft.com/en-us/Windows7/create-a-restore-point

  Important note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Installation upgrade to Win 7 Pro 64 Full

  I have a PC (can call PC - 1) with Vista installed. I've upgraded to Windows 7 Pro 64-bit and all sorts of problems.

  I bought a copy of OEM Win 7 Pro 64 and install it on a new hard drive on this PC-1. He works very, very well. So far, I'm very happy.

  The old hard drive on PC - 1 is out of the computer in a shelf with no use. He has my Windows 7 Pro upgrade in it.

  I bought a brand new similar (PC-2) computer and a new hard disc, so now I have:

  -PC-1 with a new drive hard and nine OEM win 7 64 bit install and works perfectly... and

  -PC-2 with a new hard drive in which I tried to install my (legal) original of the upgrade to Win 7 Pro 64, but I didn't want to not install Vista first, because I'm having the same problems that I had in the first place, so I install as a full version. At the point where he asks me my product key that I copied from the sticker in the present case, he tells me is not a valid product key.

  What should I do to use this copy of Windows 7 Pro in my new hard drive, but do not install Vista first?

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  You can not install the upgrades on a blank disc.

• After installation of Windows 7, I need key activation of an earlier version of Microsoft Office 2007 for a complete installation upgrade Office Small Business. It comes from or where it is found.

  When I bought a Lenovo Y530 with a trial version of Office 2007, I also bought an upgrade to Office Small Business 2007, installed, registered and used for about a year. About a year later, I've upgraded to Windows 7.  I went to install Office 2007 and it asked me for the key to the trial version.  How to do it? where can I find?  If there is a confirmation of registration e-mail in my Inbox how I read it until I re - install the software?

  Hi jdm-minn.

  a. do you have a disc of Microsoft Office, when you bought a Lenovo Y530 laptop?

  If you have, then check out the key on disk.

  b. do you have check-in confirmation email when registering Office Small Business 2007?

  Thank you for visiting the Microsoft answers community site. The question you have posted is related to Microsoft Office, and would be better suited to the Office Discussion groups. Please visit the link below to find a community that will provide the support you want.

  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  However, you can visit the links that may be useful below.

  http://support.Microsoft.com/kb/927756

  http://support.Microsoft.com/kb/823570

  Hope this information is useful.

  Thank you, and in what concerns:

  Umesh P - Microsoft Support

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.