Installed 8.6.1f1 Patch - LabVIEW has now "no license available".
I just installed the Patch - 8.6.1f1 and now LabVIEW refuses to start. I had a look in the License Manager and the key is there, but when I try to launch LabVIEW, it is listed as "no license available".
Thanks for the reply Ajmal,
I installed the patch on top a copy of 8.6.1 I've used for several months, he was certainly properly registered before the patch. According to the Manager of licenses, it was still registered with no expiration date!
In any case, I've fixed since my installation, and he now works again. I don't know if the patch installed correctly now however; It seems unlikely
Brett
Tags: NI Software
Similar Questions
-
A few weeks ago, I installed Comodo Firewall and uninstalled quickly. Now, I find that it has diverted the navigation program (not the field of research but the side navigation) default search bars. I have reset 21.0 FF that it did not yet use the Comodo research. I found one ran the search default reset program also, it did not work. What else can I try?
If you have used the reset Firefox feature, then the Firefox search parameters are at their default values, unless there is a malicious program, intervene on the settings as soon as born new Firefox profiles.
1. check your DNS for IPv4 and IPv6 settings. If they are set to anything other than automatic, compare the values with Comodo SecureDNS.
Do not change these settings without writing first down the original values; your ISP may require the particular addresses to clarify, rather than using the automatic setting.- http://Windows.Microsoft.com/en-us/Windows7/change-TCP-IP-settings
- http://www.Comodo.com/secure-DNS/switch/
2. If you have a router, check the settings as well. Refer to the manual of your router for more details.
3. If the problem persists, post on the Comodo forums for help.
-
Ok.. I bought a laptop with Vista pre installed Sony.
Then, I bought a copy of Win 7 Upgrade to upgrade, I did.
Shortly after, my laptop broke and I got a new laptop through my insurance company which had Win 7 pre installed. I just got a new desktop PC and was wondering if I could use my Win 7 Upgrade disk to do a clean install on my desktop that my old laptop has now been destroyed. ?As long as the original computer disappeared, I think you can use the upgrade on another computer...
-
I have an old Photoshop CS3 that was installed on a desktop computer that has crashed and is still not bootable. I now have a new office with 10 windows and I installed it and it works. Activation is dimmed, but I can't save. It is said there is no internet connection, which is not correct. What should I do?
Please read https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and disable your firewall
-also clear the cache of your browser if you start with a fresh browser
-check the file hosts for blocked entries https://forums.adobe.com/thread/1912777
An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others
- or run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)
-
ACROBAT BUSINESS TOOLS has been installed on my PC by Dell. Now I have to reinstall the software, but I have only the serial number. Where can I download the software? Thanks for your help.
-
The HD I had my installed Photoshop has now died. I now work with another HD and reinstall Adobe Photoshop. I had paid about $10 a month. How can I get Photoshop working in my computer, but in a new HD? Thank you, Pablo
Hello
In order to download Adobe Photoshop, you need to download the desktop app creative cloud first.
You can please apps download Adobe Creative Cloud | Adobe Creative Cloud free trial
After downloading the desktop application, you can download photoshop through it.
Kind regards
Sandrine
-
I bought LR 6 and installed on the desktop and laptop. Now desktop mainboard has failed and hat to be replaced wit consequence to reinstall Windows 7 and 6 LR. Now, I exceed the number of licenses. Should I still buy LR8?
Hi John,.
I'm unable to install the second copy LR6. I get the windows with the message that I've exceeded the number of licenses.
I did the following:
On the desktop computer:
I registered
Uninstalled LR
Re-installed LR
On laptop:
I registered
Uninstalled LR
Re-installed LR
What's wrong?
Concerning
Dieter Kolonko
Von: John T Smith
Gesendet: Mittwoch, 19. Juni 2015 21:02
Year: Kolonko Dieter
Vacancies: I bought LR 6 and installed on the desktop and laptop. Now desktop mainboard has failed and hat to be replaced wit consequence to reinstall Windows 7 and 6 LR. Now, I exceed the number of licenses. Should I still buy LR8?
I bought LR 6 and installed on the desktop and laptop. Now desktop mainboard has failed and hat to be replaced wit consequence to reinstall Windows 7 and 6 LR. Now, I exceed the number of licenses. Should I still buy LR8?
created by John T Smith https://forums.adobe.com/people/JohnTSmith > in download, full installation, commissioning - see the discussion of https://forums.adobe.com/message/7667228#7667228>
-
I had a game on my laptop called sniper art of victory but it has now stopped working and I can't get it working again. the loading of the game at the level that I saved my game to but then when I go to start the game where I recorded home everything stops and I get a message saying that the game does not run correctly, and windows has stopped, so what could be wrong with the game
Hey paul bell bond,.
There could be several possible reasons for this.
Try to get the game settings to the 'Factory Defaults'. For instructions on how to do it please contact the vendor of the game. Delete all of your temporary files and see how it goes. To do this, run Disk Cleanup.
See the article below:
Delete files using disk cleanup
http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanupAnother application could also be in conflict with the game. Perform a clean boot procedure to verify if this is the case.
Please follow the steps listed in section of the knowledge base on how to achieve this.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135As a last resort, you can uninstall and reinstall the game. It should work.
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
When I double click on an Aperture library (the app is no longer installed on my computer) Photos repaired and opened it. My previous photo library has now been replaced by the opening one. How to return to the photo library? Where at - it go?
< re-titled by hosts >
You should have several libraries - hold down the option key while launching Photos and check every library in the window select library - you should find the original it
LN
-
IMAQ installed, but not found in LabView
Ladies and gentlemen,
We have a 2012 faculty (student) University of LabView license and want to use a digital camera with Labview. LabView has been permitted, also installing IMAQ 4.6.4 produced any errors. It is recognized by the NI Measurement and Automation Explorer as you can see in the attached PDF file.
However, IMAQ features are not visible in the window function LabView and our VI test cannot find functions IMAQ (pages 5 and 6 of the attached PDF file.
We reinstalled twice, LabView makes sure the antivirus has been disabled. We have also tried to install another version of IMAQ (4.6.1), but with such problems as described above.
Today, I realized that we have a version of 64-bit Windows and LabView has 32 bits?
Thank you very much for your help.
Here's the most likely explanation of our problem: IMAQ 4.6.1 and IMAQ 4.6.4 are not compatible with LabView 2012:
http://digital.NI.com/public.nsf/allkb/DB928F6D5E9D6B97862579A7006B2850
-
original title: "read only".
I restored a file on a hard disk newly installed using system MS Backup tool and now it is "read only". Anyone has a solution. I use XP Professional sp3. Thank you.
Right click on the file > properties > uncheck Read only > apply > OK.
-
Original title: April 16 to restart my computer after installing Windows Vista upgrades, my office is now only 2 thirds of the screen, with the third other black
The whole office is there, but it is located in the Center, if the screen, with black bands at the top and bottom. By clicking full screen on the top right has no effect.
Hi Jeremy,.
Thanks a lot for your help. You're right, I should have said no upgrades and updates.There were a total of 10 updates:4 a security updates for Vista,1 security update for the Microsoft 2010 information access path,1 day of cumulative security for IE9.1 windows Live essential 20111 definition update Windows Defender (KB915597)1 "" for Office 2010 "1 April 2013 malware toolI uninstalled Windows Live Essentials. I felt that I should not uninstall the updates of security, and the Defender update can not be uninstalled. It made no difference.I also checked the graphics card and told me that I had the latest version of the software.Then I checked the configuration of the monitor and graphics card configuration and found I could set the configuration to full frame. I did it and now all is well again.How and why the full frame disappeared April 16 remains a mystery.Thank you very much for your information without your help I would have been unable to delve deeply into the system. I learned a lot. -
Hi, I used to have a "Desktop" taskbar at the top of my screen and it has now disappeared. I miss this 2nd task bar! Anyone know how to get it back? Thank you very much!
You are welcome.
You should be able to download / Save the Dell Dock on the desktop of your computer online from the link to it that I gave you (included in this message also) > copy it to a Flash Drive > transfer / install on another computer/laptop.
It's only 12.7MBs
That saves waiting you!
Thanks for the reply.
See you soon.
Mick Murphy - Microsoft partner
-
Error message "display driver has failed but has now recovered.
I received a message on my PC saying "display driver has failed, but has now recovered," I got a black screen when it happened. Does anyone know what this means?
Jack
It is more informative than an error message. If she does not recover, it would be a problem. You may be able to solve it by installing the latest video driver available.
-
I installed CC2015 first on my desk. Now I'm on the road, I can't use the software of my laptop My ID is not recognized. Help.
You can use the CC as desktop application for up to 90 days as long as the CC is active & has no problem billing. You must connect once within 90 days to maintain the activation.
Let's get further this issue at our office in response https://helpx.adobe.com/contact.html .
Concerning
Stéphane
Maybe you are looking for
-
Safari does not history... Help!
2 days ago, I upgraded my iPhone to IOS 9.3.3 6. However, I find that safari does not save history more when I left completely. I change all the settings and it is not in private mode. I also turn off service iCloud on my iPhone. What should I do? He
-
Satellite L300 - Motherboard issue
Hi guys I have a L300 motherboard that needs to be replaced. Must be the same as the code on the motherboard, or can I use different one of the same series MineNumber of room = 13100a 2170208SP = v000138040 I want to replace it with the is this code
-
Ask about the maximum memory recognized in the Satellite Pro 4200/4300 series
I thought that the maximum RAM that could be recognized in the series SP4200/4300 of machines was the 64 MB on board, over a maximum of 2 X 128 MB tapes in the two expansion slots for a total of 320 MB. However, I came across an ad from someone who c
-
Unlocking a Paolo locked when the username and password are forgotten
I have an old p4that that I have not used in about 4 years I want to go down photos etc. but given the length of time that I did not use the p.c. I forgot the username and password... is there a way to bypass the log in?
-
I can't delete an old backup file
Several months ago, I made a return upwards on a disc. Now, it's showing on my computer and no matter what I try, I can't it turned off my computer... it's take up a lot of disk space. * original title - I can't delete an old one to back up file...