Installed Windows 7 in the wrong place

Similar Questions

• Boot Camp can not install Windows because of the formatting?

  I have a 2012 MacBook Pro (500 GB to 8 GB memory storage) with the OS X 10.11.3. I try to install Windows 8 Pro (64-bit) using Boot Camp. When I restart my computer after creating the partition, I have two USB ins journal. They say Windows and the other says Boot EFI. When I click on the option of Windows, I am taken to a screen that says that there is no bootable disk and restart with an inserted. When I click on Boot EFI, I did get into the Windows partition and can start set up for installation, but when I get to the stage where it asks me to install Windows, none of the listed drives are able to have Windows installed. I have a list of 4 disks, all drive 0 and then partition 1,2,3,4 respectively. 4 is the one that is 46.6 GB (I created Windows to be 50 GB), so I guess it's that I need to be installed in. However, when I click on any of the partitions, this message appears: "Windows cannot be installed to this disk. The selected disk is a MBR partition table. On EFI systems, Windows cannot be installed to GPT disks. Windows cannot be installed to this disk. Hardware may not support booting to this disk. Ensure that the disk controller is enabled in the computer's BIOS menu. "After talking with the Apple support (who told me it was a matter of putting in the form any and to talk to the Windows how do I reformat) and Windows support (who took the opportunity to remind me why I had stopped using them in the first place), I think I have a better idea of what it means , but I have no idea what to do about this. Anyone have an idea how I can fix?

  You have two choices.

  1. use GPT Fdisk to delete the MBR and continue boot EFI. Later, it is problematic when you install the drivers for the Apple hardware.

  2 use a USB2 flash drive and let BCA create setup of USB and partition your drive. No matter what Manual partitioning or manipulate the installer USB can cause problems.

• FreeCell game moves the columns to the wrong place

  I checked the related topics were displayed with no luck.

  My problem is a column had moved and was in the wrong place.  Column 7 of 8 has been moved down beyond the end of column 8 and is now fully functional, to the right of the screen.  Now the right column 7 appears empty and is not recognized as a plus column.

  I tried to post on the other posts instead of starting a new post, but none of the experts seem to be looking back.

  I tried all the suggestions. Restore privious point, uninstall/reinstall, sfc/scannow, several resets etc. No luck.

  Other solutions?

  It is absolutely amazing. Than to repair a 800ko program/game it will take hours of effort to go through a reinstallation. Backig to the top of my data, reinstall my programs, desktop, shortcuts, passwords etc.

  The option 'fix' using the disc is not available for me because I have a Dell laptop which has the hidden partition "system restore." I don't think that the option is available. I'll check.

  It seems that where ever FreeCell 'will' and 'comes' of when you use the "Turn Windows Freatures power' is corrupted.

  Just an aside, is that the problem has added a "degree of difficulty" to play FreeCell, that I adapted for. I think that at this time I'll just live with it and add another element to the list of what's wrong with MicroSoft Vista.

• When you type on the keyboard, the characters on the screen are not what I typed. "These characters are in the wrong places (~ @ #" | "), how can I solve this problem?".

  The characters are in the wrong places (~ @ "|") (# and the Sterling character is missing), I tried troubleshooting and this message comes on my screen.

  ID of device PNP ACPI\PNP0303\4 & 31AD995D & 0
  Error code this device is not present, does not work or does not have all its drivers installed.
  One of you smart people have a solution I can try.
  Thank you very much
  otev

  The characters are in the wrong places (~ @ "|") (# and the Sterling character is missing), I tried troubleshooting and this message comes on my screen.

  ID of device PNP ACPI\PNP0303\4 & 31AD995D & 0

  Error code this device is not present, does not work or does not have all its drivers installed.

  One of you smart people have a solution I can try.

  Thank you very much

  otev

  You use the wrong keyboard layout. Apparently, you have a UK keyboard, if you want that the UK keyboard layout. You are probably using the American provision.

  To change it, go to control panel | Region and language and click the keyboard and languages tab. Then click on change keyboards... and choose the one that suits you.

• Floppy disks to install Windows 7 and the product keys are exclusive to each other?

  Floppy disks to install Windows 7 and the product keys are exclusive to each other?  Or can I use a disc that I have to restore the windows on a second laptop and activate it with a different product key?  It is not a question to find out how many users I can put in place, but whether the disk and product key are mutually exclusive.

  As long as the product key matches the edition, it should work perfectly, no exclusivity.

• Drop-down menus appear in the wrong place

  Some of my menus appear in the wrong place. Seems to be limited to those in the Panel on the right... Also, it seems to be related to windows 10's high resolution display scaling, because it solves the problem to initialize it to 100% (but causes many others...) I also tried to go to lightroom.exe properties to disable the high DPI scaling, but it makes no difference... Is this a bug, or is there something else I can do to fix this?
  

  Hi AASOS,.

  This issue has been traced.

  Refer to this link: 2015.6 Lightroom: list dropdown question menu position with screen high resolution | Community customer Photoshop family

  Concerning

  Claes

• In Lightroom 5, choose "Merge to Panorama in Photoshop" open PS in the wrong place

  Hello, I use Lightroom version 5.7.1 on an iMac with OS X (version 10.10 [5]) and, until recently, if I chose the Photo - Edit open inside my request of Photoshop on my boot drive.  Now, although it uses by default trying to open the backup copy of Photoshop on my external backup drive, which is a clone of the hard drive of my iMac, and if I choose "merge to Panorama in Photoshop" (which I need to do often enough) it freezes and gives the following error:

  

  I can see that it tries to open the cloned version of Photoshop (on iMac Anna/backup/Applications/Adobe Photoshop CS6) but I can't find any way to change this so that it can reuse the version on my boot drive.  I'm sure there must be a file somewhere that staged Lightroom to try to open Photoshop on the external hard drive, but I don't know where it could be.

  If I have already opened the version of Photoshop on my startup disk before trying to merge with Panorama, it will use that one.  If I remove the external hard drive containing the cloned version of Photoshop, I just get an error that says that the files could not be changed because Photoshop CS6 could not be launched.

  I tried to delete the file [file username]/Library/Preferences/com.adobe.Photoshop.plist, then by restarting Lightroom, but it did not help.]  I also tried to change the external editor in Lightroom preferences - preferences: I can create an additional external editor and have pointing to Photoshop on my boot drive, but this has no effect when you try to merge with Panorama and I see no way to change the settings to 'Edit in Adobe Photoshop CS6' at the top of the box as shown below :

  

  If anyone has a solution to this, I would be really grateful.  Thanks in advance.

  Anna

  Post edited by: Anna walls

  After posting this question I've been tracking the answer me - it seems that there is a bug in Lightroom that Adobe know since at least January 2015.  As far as I know, it has not been resolved in the latest version of Lightroom, but they wrote a plugin that works around the problem.  I have downloaded and run and it works, so I thought I would like to include the link to the page in case someone else has the same problem:

  Lightroom: "Edit in PS 2014" opens PS 2014 in the wrong place. Community customer Photoshop family

  Ignore the first suggestion about uninstalling Lightroom and Photoshop and scroll down the page until you find the official response from Jeffrey Tranberry - there is a link to download a plugin it and once you installed you will be able to specify the location of Photoshop.   With a bit of luck will be solved properly in a future version of Lightroom.

  Best wishes

  Walls of Anna

• Stroke in the wrong place after copy/paste in Illustrator CC

  Since the passage of the CS6 at CC, I have a problem of copy/paste, work of one Illustrator document to another.

  Sometimes features are in the wrong place as you can see in the screenshot below. On the left side I just copied a picture from another file I and lines appear at the bottom right where they should be (in this case it is not possible to select the lines "out of place". Moving all about what I selected moves around the misplaced lines, but they keep the same distance. The way I found for this problem is either doing "Contour lines" or to make the illustration more bigger or smaller. Which will appear automatically the features in place. If I can undo these changes traits remain in the right place.

  This seems to happen with illustrations that have been made to the CS6, but save the original file does not help CC; the problem is occurring. It also seems to occur to the traits that have a variable width profile. Features with a uniform profile remain in place. I had this problem in Illustrator CC on Windows and Mac, with various files that I created initially in CS6. It is quite annoying because I copy and paste a large number of these illustrations, so I find myself constantly having to do "Contour lines" and then "Cancel" to remedy. What can I do to prevent this?

  

  Please apply the latest patch 19.1 this should solve your problem.

  -Ashutosh

• Photoshop saving files in the wrong place

  I started using Lightroom, most recently being forced to leave the opening by their lack of support and development.  I have the latest version of CC 2014 of two (5.7.1) LR and PS (2014.2.2), and the operating system is Mac OS X 10.10.2.  When I send an image to Photoshop to be edited, Photoshop saves it in the wrong place when return to LR.  Instead of returning to the same folder that the original came, he returned stepped to the top of the hierarchy and renames it as the record that she was originally (sequence, if tried repeatedly).

  For example, if I have a folder system in LR such as:

  2015

  January

  27

  < filename.cr2 > <-original file being transmitted to Photoshop
  

  When I use "Edit in Photoshop" on < filename.cr2 > of LR, when I save the file after modification, using the close box in the window/tab and then clicking on "Save" when the confirmation dialog box appears [edit:] Note: the file name IS correct in the [\Edit] save/Cancel dialog box, the file is incorrectly registered as < 27. psd > in Januaryrecord.  The original file remains in the original location.  for example,.

  2015

  January

  < 27. psd > <-new, edited, badly in a subfolder to modify and resave file name
  

  27

  < filename.cr2 > <-original file still correctly
  

  This prevents also from stacking, because LR doesn't add images not in the same folder.  Repeating attempts end upward with < 27-2.psd >, < 27-3.psd >, < 27-4.psd > etc., all saved a step upward path in the folder of January.  It does not matter if I select the file to change it from the record of 27 , the January file or folder 2015 , he always he did the same thing and returned to a step upward from and named, the folder in which the original file resided.

  He seems to be a problem of the PS is not a problem of LR, but I can't yet find a solution I tried each preference, which seems to be in no way affiliated with the backup or a file that controls the behavior in both programs, nothing helps.  I'm sure it's just a problem I have-D-10-T, but I can't find it yet.

  Post edited by: edit Ken Lucke added noting that filename is correct all the way up to and including the Save/Cancel dialog box during the closure

  The location to save files is your choice. Once set correctly, in the folder you select in LR, it will be always saved there.

  In LR open preferences and go to the external publishing tab and down select what you want the edited externally to be named (IIRC the default is to add "-Edit.psd" you can change it to what you want.)

  Select an image, a picture, and then click the export button. In the dialog box that appears at the top right and export to: make sure that it is set to HDD, then in the next section, "Place of export" select "same folder as the original picture. You can then select whatever other options you want to export and click the export button (you can delete this image, once this step is completed if you want).

  Now when you right click and select Edit in and choose photoshop just click Save icon or Ctrl + s or command + s and not save as. At this time you should not get everything save dialog windows. The file should then be recorded in the original folder, with the name of the file and modify (or whatever you chose as add it to the file name) and stacked with the original, if you selected in the external publishing tab.

• Verification request uses the wrong place

  I can't connect my mac to iCloud after changing my password.  Request for verification on the phone uses the wrong place.  It is safe to accept access?

  What do you mean by 'place' in 'request for verification on the phone uses the wrong place?

  You use two factor authorization?

• Install Windows 7 on the Satellite M100

  I have the Satellite M100-JG2 (PSMA0C-JG200E). I would like to install Windows 7. The Toshiba does not list the compatible M100. The Microsoft Windows 7 Upgrade Advisor points on certain issues, but I don't know how it's easy to overcome them.

  I read on another forum that the touchpad does not work after the upgrade, but this was solved by installing a Synaptics driver. Otherwise, I see people announced the upgrade succeeded with no other info. Can someone tell me if they have been successful or not to undertake this upgrade, all the problems that they led in to and how they have solved their?

  The Windows 7 Upgrade Advisor provides the following information (I remove personal programs):
  All the systems pass (I have only 1 GB of RAM if, so do not know if it is too little, even if it is passed)
  Pass all devices

  Program questions:
  TOSHIBA ConfigFree version 5.90.05 (don't know if I still need this)
  Version 1.39.0.4C of TOSHIBA hardware
  1.39.0.5C TOSHIBA supervisor password version
  TOSHIBA Alps Pointing - device Driver version 6.0.2.186 (is this touchpad)
  Version client and Host Security Platform 104.0.14.2

  Any help or advice would be welcome before I attempt this upgrade.

  Thank you!

  Win 7 Vientiane does not contain Flash cards! You must install separately.

  Take a look on the Satellite L500 driver area.
  You'll find the VAP and Flash Card Utility for Win7

  I recommend reinstall these two tools again

  Welcome them

• Re: How do I install Windows Xp in the Satellite A200 1 M 7 PSAE3E?

  Hello

  I have a laptop Toshiba Satellite A200 1 m 7 PSAE3E, while I am trying to install windows XP on the laptop, his watch no HDD installed. Can I get the * Raid * for the laptop? so that I can customize windows XP and detect the than hard drive to install it.

  Thanks in advance.

  > while I am trying to install windows XP on the laptop, its shows no hard drive installed
  You need to install the SATA drivers!
  The laptop supports the SATA controller and the drivers are not part of the Windows operating system.
  The SATA drivers are in the Intel Storage Manager!
  Read some threads here about this theme for more details! There are a lot of threads!

  > Can I get Raid for the laptop?
  No, because the phone doesn't support RAID controller.

• iMac14, 4 have message "Could not install Windows 10" during the update to build 11099.

  iMac14, 4 have message "Could not install Windows 10" during the update to build 11099 and get the error message "this device is not compatible on Windows 10. Contact the manufacturer for more information. (Network Broadcom 802.11ac adapter) ».

  Picture to describe the problem: http://i.imgur.com/H0SlKd6.jpg

  I think you need to contact Microsoft.

• Dependencies in vi.lib and loading of the wrong place user.lib

  Hello

  I'm having a weird problem trying to load a LabVIEW project in 2013. Whenever I open the project folder, it keeps looking for files in vi.lib and user.lib in the wrong place. Instead of search in files (x 86) C:\Project \National Instruments\LabVIEW 2013\vi.lib, he look in C:\Program Files (x 86) \National Instruments\Targets\vi.lib

  

  I have manually browse for each file in the directories vi.lib and user.lib and point each a return to real folders. But in the project folder itself, all the files I have loaded just said that it is still in conflict. When I try to resolve conflicts of files, they disappear for a second then come back.

  I can't make LabVIEW for functions in the directories user.lib and vi.lib normal, it keeps adding targets in the destination.

  I tried to do a recompilation of mass, and which does not at all help.

  When I load the project, select a few dozen files vi.lib and user.lib, do a save all, close the project, and then re - open, I need to reconnect every file again.  It still seems for all... \Targets\vi.lib instead of just \vi.lib.

  This isn't the case for all projects, just this one it seems.

  The files are in the right place based on the path under "loading". If she says it's in : \Waveform\WDTOps.llb\WDT number of waveform samples DBL.vi, it really is. The path on the top is right, I don't know why LabVIEW is not find anything.

  Any idea how I can get this project to stop looking for vi.lib in the folder target?

  ng1902 wrote:

  I managed to get the errors to stop copying vi.lib and user.lib files in the subfolder of targets.

  This could be dangerous and cause problems.  If it's possible after your project.

  When I saw this sort of thing in the past, it was usually because of a broken dependency I got didn't really need.  I would say through your dependencies (in project) and search for the odd elements glyphs showing errors.  Try to find out why those are dependencies and remove unused code, or links to the missing code.  Resolve all conflicts and then make a backup of all.

  In the past, it happened when I tried to copy a project as a new project, and then changes the code snatch which was unnecessary, but there was always a code in a disabled structure that could not be loaded causing a kind of problem of linkage project.

• can we install windows 2000 on the i3 system

  can we install windows 2000 on the i3 system

  Depends on if you can get the drivers for your Windows 2000-compatible hardware; you need to verify that hardware manufacturers laicists site to check the drivers. Most of the hardware manufacturers are not even the creation of drivers for Windows XP that is newer than Windows 2000.

  Check out the thread below (specifically the post from Andre Da Costa) from earlier today about the installation of Windows 2000 as a virtual machine.

  lnstal dual boot win 2000 on existing Win7Pro64bit
   http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/lnstal-dual-boot-win-2000-on-existing-win7pro64bit/fac80945-70f0-4e18-9c1a-65acbb1ec85e

  Kind regards