Installing a version upgrade to a new PC

Similar Questions

• When I install CS5.5 (upgrade) in a new computer, it says that there are no old version in the computer. I have older versions CS3 and 1.1 What do I have to install them also?

  When I install CS5.5 (upgrade) in a new computer, it says that there are no old version in the computer. I have older versions CS3 and 1.1 What do I have to install them also?

  Laughing out loud

  but after you have entered your serial number of cs5.5, the installer will search your computer for cs3.  Unable to find the Setup program will present a drop-down list of previous versions.  Select cs3.  you will be prompt to enter the serial number for cs3.

  Enter the correct number at the right time and proceed with the installation.

• Install Windows 7 upgrade on the new hard drive?

  I have the Windows 7 upgrade version that I installed last September, but a few days ago my hard drive died.  How do we install the version 7 upgrade on the new hard drive without using a previous version of windows on it?

  In order to install the Windows 7 upgrade version, you must have a system of eligible operating Windows installed and activated.  You cannot install a version upgrade of Windows 7 on a drive blank.  The installation procedure you do not insert a Windows disk in the drive for verification, eligible operating system must be installed.

  If you do not have a qualification system of operating Windows installed with an activated genuine license, then you can not use the version upgrade of Windows 7 - you would need a license of Windows 7 "full version".

  In summary:

  1. a Windows operating system to eligible address must be installed.
  2. the Windows operating system to eligible address must have a genuine license (product key) and it must be enabled.
  3. to upgrade, boot on the eligible Windows desktop, insert the Windows 7 upgrade disc in the DVD player.
  4. when the menu appears, select custom (advanced option) to a clean install procedure.

  You should be able to repair the installation, if your installation one fall. I suggest create you a System Image (backup) of your installation of Windows 7 after installation of Windows 7 in order to spare you the trouble if your computer one fall in the future.

  You can work around this two ways, I would suggest that you create a System Image (backup) of your installation of Windows 7 after installation of Windows 7 in order to save you the trouble if your computer loses the system failure or instability. Since you are in possession of a valid license of Windows Vista for this computer, you can use the following method to do a clean install with upgrade support:
  http://www.winsupersite.com/Win7/clean_install_upgrade_media.asp
  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Cannot install a version upgrade of Windows Vista after changing the hard drive.

  Original title: my computer gives me a warning... saying backup.

  My hard drive is bad.  I can feel it.

  Keep the system lock up and rebooting message says cable and BAD status.

  I took the hard drive... put in a new one... and now it says I can't install vista.

  I have the version upgrade.

  I put XP on this drive and upgrade again.  Y at - it something I can do.

  I want to just reinstall windows vista on a new drive.  How can I accomplish this.

  The bad hard drive still works and is accessible it is not stable and keeps locking up.

  The full version of XP that I have is out of licenses.  Help Help

  Hi Rob,

  You must install first Windows XP and upgrade to Windows Vista.

  If you have a genuine copy of Windows XP, after you install Windows XP you can contact support for Microsoft's Activation to activate the copy of Windows XP.

  For more information, you can consult the following articles:

  Upgrade Windows XP to Windows Vista

  How to activate Windows XP

• Move a version upgrade to a new computer

  I am running Windows 8 Pro on my desktop I built from scratch in 2008. My path to the current operating system went Vista Ultimate Edition (full version) > Windows 7 Professional (updated) > Windows 8 Professional (upgrade). All the steps have been performed with the new software of the retail (not OEM versions) and I got all the records & codes activation. I'll add that I bought and installed upgrading Win8 less than a month ago.

  Since then, I decided to build a new computer using the Haswell i7 architecture and an SSD for the boot drive, and I want to start with a clean OS install. The old system will be eliminated parted and the boot drive is destroyed.
  Is there a way to install my license Pro Win8 existing on the new system? If so, is it possible to do without the installation of Vista and upgrade to Win7 and then Win8? I guess I should buy a new Pro Win8 license, but it will cost nearly $300 if I merge the $90 I just spent from Win7 to Win8.
  Any advice will be appreciated. -Pete-

  See the following topics:

  http://www.eightforums.com/tutorials/13375-clean-install-Windows-8-upgrade.html

  Note: Make sure that the Windows 8 Pro upgrade is no longer in use on the old computer.

  You may need to reactivate by phone:

  1. press the Windows key + X , and then clickrun, and then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• How do we install student version CS5 on my new computer?

  The license says that it may be on 2 computers at the same time, so I would not disable it immediately on my old computer. I just want to install it on my new for now.

  Install it and activate using your serial number.

  CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

  There is no special version that presents itself as version student... it is the same software under another version... license/serial number is the only thing that is different.

• Unable to install Photoshop CS5 upgrade on a new computer.  [was: Fairrel]

  I can't install the upgrade Photoshop CS5 on a new computer.              Any suggestions?

  Fairrel Tackett you have no software titles or active members in the title of the e-mail address/Adobe ID allowing you to post on this forum.  Please make sure that you log on to the account associated with your registered software titles before you contact our support directly team to Contact the customer.

  If you are unsure which e-mail Adobe ID/e-mail address contains your registered software titles then please provide alternate email addresses and phone numbers for your registered software titles can be found.  For more information on how to locate and to register and title of the Adobe software, see find your serial number quickly.

• Cannot install the version upgrade of Adobe Presenter 9.

  When I tried to install the upgrade, he stopped and said that I needed to restart.

  I did this... .and then when I tried to reinstall it asks me to remove the trial version of Adobe Presenter 9! I never installed a trial version.

  So, I had a conversation and downloaded the Adobe cleaning tool.

  Has passed through the stages. There is no presence of an Adobe Presenter 9 installation. Of course Adobe Presenter 8 is installed... .and it takes to be upgraded.

  I hope someone here can give me one solution, else I call Adobe Tuesday after his return from Mumbai

  Hello

  Can not coexist two versions of Adobe Presenter.

  Please uninstall the previous version of Adobe Presenter 8.

  Then install Adobe Presenter 9, it should work.

  Let us know if it works.

  Kind regards

  Mukul

  Adobe Presenter Engg. Team.

• Windows 7 student version is identical to the full version upgrade if I'm upgrading from XP

  Windows 7 student version is identical to the full version upgrade if I'm upgrading from XP

  Ronnie,

  Thanks, if it is so why Microsoft sells version upgrade to the full version of its operating system, I was going to buy a full version, but if the student version will do exactly the same thing I may as well save the money. Also, I was wondering what was the difference between student and other versions of office, you views would be appreciated because it is all a bit confusing. Thank you once again.

  Regards Simon Cheetham

  The difference between Windows 7 full version and upgrade versions is a matter of convenience.

  The full version of Windows 7 does not require that you have a license of qualification to be eligible for the upgrade.

  In order to install the Windows 7 upgrade version, you must have a system of eligible operating Windows installed and activated.  You cannot install a version upgrade of Windows 7 on a drive blank.

  You can do the same thing with the student version, which makes the different student version is applied reduction if you have an account valid .edu.  There is no difference is the code of a regular retail upgrade version.

  Also, I must point out, updates make it affordable for consumers to spend in future versions. For example, the PC I'm running now provided with Windows XP Professional, I didn't buy the Windows Vista Business Upgrade, Windows 7 Professional Upgrade instead of buying full versions of these newer versions.
  
  Also, I was wondering what the difference was between the students and the other versions of microsoft office, you views would be appreciated because it is all a bit confusing.

  One is a productivity suite and the other is an operating system. If you are referring to editing Office home and student, good Office Home and Student edition allows you to install on 3 computers. She is allowed only for noncommercial purposes. You are not eligible to reductions in upgrade for future versions. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• Try to upgrade to the new version of Java and get error 1606: could not access network location %APPDATA%\protector.exe

  I tried the upgrade to the new version of JAVA kept b/c getting reminders... uninstall the older versions (2)... réessayées... got the following error code: "Error 1606.  Could not access network location % APPDATA%\ ».  I tried of looking for help on the Java site. and I tried a few suggestions listed... no luck!  CAN SOMEONE PLEASE?

  Thank you!

  gasweetpeach54

  The usual reason for this error message, it's that some of the registry entries mentioned in the following items are damaged.

  http://support.Microsoft.com/kb/886549

  http://support.Microsoft.com/kb/2258121

  If you are unable to fix it by using these methods, try to create a new user account, give administrator privileges and use it to install Java.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-a-users-account-type

• MY DELL LATITUDE D610 HOW CAN I UPGRADE TO THE NEW VERSION OF WINDOWS? NOW IT IS WINDOWS 7, WHAT VERSION IS SUPPORT FOR USE WELL ON MY DEVICE?

  MY DELL LATITUDE D610 HOW CAN I UPGRADE TO THE NEW VERSION OF WINDOWS? NOW IT IS WINDOWS 7, WHAT VERSION IS SUPPORT FOR USE WELL ON MY DEVICE? PLEASE HELP ME

  Read this: upgrade Windows 10 Dell Latitude D610

  Take a look at my answer, complete instructions.

  Basically speaking, Dell officially supports Windows 2000 and Windows XP on Dell Latitude D610 (and other models of Dx10).

  However it can really run Windows Vista and 7 at least, as long as you max out the RAM (2 GB, 2 x 1 GB, can be purchased at a great price in eBay) and install the drivers, in particular graphics drivers, look in Device Manager and see what drivers are needed manually.

  If you're lucky to have a D610 with ATi graphics card then you can even run Windows 8 and 10 with all drivers available, and I can tell you that it won't be slow dog not unlike a lot of people say, I don't have something similar (a HP Compaq nx8220) in common use. Keep as lean as possible (not bloatwares, anti-virus etc.) system, and it will serve you well.

• New installation with a version upgrade to windows7

  A failure of recent motherboard (that fried also the SSD C: / drive) I found it necessary to replace my motherboard drive and startup. Since I own a version upgrade (not OEM) I tried to install windows XP. Now I am stuck in a loop after windows xp BSOD installed loads. By simply using the disk win 7 to the custom help (as suggested on the Microsoft web site) install installation is impeccable but not activate. Offices of Microsoft response solution is to buy a new copy. Is there a way to enter in my

  License number XP (which is what I expected)?

  No - you must use a Windows 7 key for installation of Windows 7.

  See here for the workaround...

  http://winsupersite.com/article/Windows-7/clean-install-Windows-7-with-upgrade-media-128512

• Photoshop 4 and 7 upgrade, now Windows 10 does not accept PS 4. How to install my versions?

  Photoshop 4 and 7 upgrade, now Windows 10 does not accept PS 4. How to install my versions?

  Hi Tuulah6441378,

  Photoshop 4 and 7 are very old versions, downloads for them are no longer available and the operating system you are using is the most recent, so there will be compatibility problems.

  Adobe has not tested these applications on newer operating systems.

  Please see, historical version of Adobe Photoshop - Wikipedia, the free encyclopedia

• I am entitled to an upgrade, as I have CS3 I want to buy a new mac and install the upgrade on the new computer. How can I do this?

  I am entitled to an upgrade, as I have CS3 I want to buy a new mac and install the upgrade on the new computer. How can I do this?

  If you get two new machines and the CS3 allows you to get the price reduced for a year then you should certainly pursue it.  However, I always recommend people to try before you buy.  When you get the new machines install the trial version and make sure that it works for you correctly.  Once you have confirmed it correct functions, then you can purchase the subscription.

• Just upgraded to the new version and now adjust no longer works, what is the solution?

  After the upgrade to a newer version the shrink to fix the width of the screen no longer works. What is the solution?

  Code changes for the HiDPI landed in Firefox 22 and later (bug #844604).

  You can change the layout.css.devPixelsPerPx and increase or decrease the value of 0.1 or 0.05 as follows to adjust the size of fonts and other elements in Firefox.

  • The layout.css.devPixelsPerPx pref is a string parsed in float value and allows you to adjust the dimensions of all elements (user interface and web pages) specifically (resolution 0.1 or 0.05).
  • You can use values between 0.05 and 1.0 to reduce the size of the elements or use a value greater than 1.0 to grow and enlarge the elements (percentage divided by DPI, % / DPI).

  If the web pages must be adjusted after changing this pref so you can watch Default FullZoom Level or NoSquint.

  • Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
  • NoSquint - https://addons.mozilla.org/firefox/addon/2592

  Also see this MozillaZine forum thread: 22 FX makes look all too big night?

  • http://forums.mozillazine.org/viewtopic.php?f=23 & t = 2678897