Installing KB978207 cause problem

Similar Questions

• I installed the latest version of flash player and it said installed successfully and I can use it very well, but when I checked the system requirements do not match. She required 2.33 ghz and I 2.13 ghz. then that cause problems on my computer? I h

  I installed the latest version of flash player and it said installed successfully and I can use it very well, but when I checked the system requirements do not match. She required 2.33 ghz and I 2.13 ghz. then that cause problems on my computer? I have an intel i3 proccessor, windows 7, internet Explorer.

  All processors Intel i3 having at least 2 hearts, your specifications far exceed the requirements; See http://ark.intel.com/products/family/75025#@All

  I have some computers with much slower processors, and Flash Player 14 works perfectly well on them also.

• M40-237: network after installing XP Prof problem

  I have buy new Satellite M40-237 laptop with win home edition on it
  I formatted the running home victory and installed Win XP Professional on it after that I have facing problem on the network
  When I ping to the other PC, I can not ping permanently some time she answered then it give me the query at the time
  What could be the problem, it's the new laptop
  Maybe the problem of network card drivers
  Please tell

  [Edited by: admin November 12 05 17:53]

  Hello

  have you installed the software in the correct order? This can sometimes cause problems.
  The order of installation are on the CD tools & utilities or in the installation instructions.

  Good bye

• KB975496 and causing problems KB980408.

  These two updates that I just installed caused problems with my C drive.  The disk check said he cannot work while the disk is used and how have it run at startup says it cannot do the job and use the system restore.  System Restore says that it cannot function without a check disk first.  What should I do?

  Depending on the operating system you have, and if your hardware vendor as long as you media appropriate, you can make a drive that started at the Windows install DVD while repair.

  In Vista (?) and Windows 7 boot from the installation DVD allows you to use repair tools, which is a command line.  The type of command line

  CHKDSK C: /F

  and a repair disc should be performed.

  Caution:-the last time I tried this it turns out that my hard drive was not physically, and for this reason, the disk check has failed, completely destroy the file system and cause a complete data loss.  REAR FIRST.

• In Windows XP, the $ntUninstall directories can be deleted without causing problems.

  I have Windows XP SP3 POS PC in our retail store lcocations.  These machines have a slightly smaller boot partition.  My question is, when you install updates from Microsoft, it creates an uninstall directory in the Windows directory.  So Windows XP, $ntUninstall directories can be deleted without causing problems or causing previous updates to be reinstalled.

  I have Windows XP SP3 POS PC in our retail store lcocations.  These machines have a slightly smaller boot partition.  My question is, when you install updates from Microsoft, it creates an uninstall directory in the Windows directory.  So Windows XP, $ntUninstall directories can be deleted without causing problems or causing previous updates to be reinstalled.

  The article at the link below gives a detailed explanation of the $ntUninstall directories. This should you guide as to whether or not you can remove folders.

  http://ask-Leo.com/can_ntuninstall_folders_be_deleted.html

• The modernization Pavilion dv8t 16 GB memory will cause problems?

  I have a HP Pavilion dv8t Quad Edition Series Notebook PC, product number: VF836AV. The maximum amount of memory that can be installed in it is 8 GB, according to the operating instructions. I recently replaced the original 8 GB with 16 GB of memory, and the 16 GB is recognized automatically. The Windows system information report now shows that the installed physical memory is 16.0 GB and total physical memory is 16.0 GB. In addition, the original memory installed in the PC has been Crucial DDR3 PC3-10600 of type, and I replaced it with a Crucial DDR3 PC3-12800 memory of type. However, the newly installed 12800 DDR3 memory does not work at its full rated speed, it runs at the same speed as the original memory. There seems to be no problem with the configuration of the improved memory, but I can't help but wonder why the manual (and even Crucial memory Advisory tool) says that the maximum installed memory should be 8 GB. Memory of 16 GB currently installed will cause damage or some other problem in the long term?

  Hello:

  A few other people have installed 16 GB of memory in their notebooks with 1st generation i7 quad cores and reported no problems at all.

  I would be not the least bit concerned the performance of 16 GB in your mobile life.

  The reason why that memory does not run at 1600 MHz is...

  Memory can only run as fast as the processor FSB speed which, in the case of yours is 1333 MHz (10600).

  If the 12800 memory simply downlclocked to match the speed of the processor.

  Not until you get to the Intel 3rd generation I series with an Intel 7 series chipset processors memory runs at 1600 MHz.

  So there is nothing wrong at all to your situation.

• Recovery system causing problems with the size of the screen.

  Due to some problems I had, I finally had to yield and perform a system recovery back to the manufacturer's specifications.  Once this is done, I downloaded all the updates to Vista, all the drivers, etc..  Everything is square and works fine now, with a big problem.  I bought a monitor 20 "a few months ago.  It worked fine before the recovery is done.  Since the resumption, the display is smaller, as if I still had the old monitor 15 '' on the system.  I did that the driver for the monitor is correct and up-to-date.  I found a way to enlarge the display of the size of the screen in an online search, but it does not clear up the problem.  For example... If I go to a site like the Pogo, the bottom of the site is almost normal size for the monitor, but the game pop up displays the size of the screen 15 ''.  I tried everything I know and can't get this last problem fixed.  Any suggestions would be greatly appreciated.  I also checked the resolution and makes sure it's OK for this monitor.  Thanks for your help.

  Do you have the driver from Microsoft or directly from the manufacturer?  If Microsoft, go to the manufacturer website and download THE latest drivers applicable on your screen and the version of Vista (Microsoft sometimes cause problems).  Does the monitor require any firmware - if so, download and install that too much of the manufacturer's web site.  You can also update the video card drivers and firmware just in case it is the underlying cause of the problem - again go to the web site of the manufacturer to get the files rather than using those available through Microsoft.

  Go to start / Control Panel / customization / display settings / and make sure that your monitor is displayed in the drop-down list.  If this is not the case, click on the box and see if you can find your monitor and then select and make the box extend the desktop to this monitor is selected.  Go into the advanced settings, click list all Modes and try one at the top, if it is not already selected (assuming that it is appropriate for your monitor).  If this does not help, try others that are compatible with your monitor to see if you can find one that allows you to achieve your goals.  It may not work, but it's probably worth a try.

  Other than that, I don't know what to think.  You already seem to have covered most if not all of the bases.  If the above does not work, maybe someone else review this thread will have other ideas to offer.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Window update causing problems of printer driver

  Hi, I have a laptop running XP and router wireless computer (WAG54G) and a set of HP6380 in one. About 2 nights ago an update to Windows Installer by himself and rebooted the laptop (even though I have some turned off automatic updates what they seem to be screwing with anything these updates produce still grr)...

  I went to try and print and to found the 6380 was absent from the list of available printers... The problem is not with the wireless network (as it is trendy and functional). I don't know what it does the update of windows... but when I tried to reinstall the drivers for this printer from the disc, he acknowledged that they were already installed... So I uninstalled them instead (and it is taken up only parts of the driver remained and he removed these pieces).

  Then I tried to do a fresh driver... install that took a long time because it got stuck at the end... Finally, he came up with an error and so I tried to introduce him, HP - and received click on a desktop icon... (Icon HP - XP Installation). I tried it but it tells me to 1) Reinstall driver (done twice -) solve printing problems wireless (not a problem at this point given that I have no printer driver and I can use the network wireless for other things very well) well tried anyway... or 2

  Anyone has any suggestions please > in the past when Windows updates have caused problems, I used the system restore to roll back, but this is only a temporary solution - as Windows insists on the updates I want!

  Thank you very much!

  If you have the original HP software CD, look in the folder of the ccc/utils for a L3_unintsall (or similar).  Run for an uninstall very full.

  Reset.

  Now, download the latest version of the software for your printer from the "Support & Driver" link at the top of this page.  DO NOT reinstall from the CD (a good rule is in general not the CDs software, but to go to the website of the manufacturer for the latest and best).

• Rename a hard disk will cause problems?

  When I got my new custom Windows 7 PC built last year, the technician just copied over my old XP, which was a Compaq machine. I don't know if he named the "Compaq" c: or if Windows automatically named that. What I want to do is to rename the drive to something more relevant, since this is a Compaq computer.

  If I rename the drive, it causes problems with the applications already installed on it?

  Thanks for your help!

  Cyndi

  Name change is OK. The drive letter (C:\ etc.) is the part you do not want to change (cannot change if Windows is installed on it), if the partition has installed software.
  If a partition has only the files that are not related (target or path) to any software, you can change the drive letter as well.

• I have a personal account of CC.  I'll get a CC account through my work for my machine here soon.  In the meantime, I can run my CC on my work computer or which will cause problems in the future?

  I have a personal account of CC.  I'll get a CC account through my work for my machine here soon.  In the meantime, I can run my CC on my work computer or which will cause problems in the future?

  When you install the cloud on a computer, the use of the programs is related to the Adobe ID used for installation

  Then use the cloud with a different ID, you need to disconnect from your personal account and sign in to your professional account to install and use

  If you would eventually use only the ID of your work on your work computer, it would probably be best to completely remove your personal ID and Cloud programs before you install using your work ID.

  Sign out of your personal account... Uninstall... to run vacuuming...

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and prior to the relocation is necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Log in to your account... Install

• Why install CS3 cause my interenet connection to fail?

  Why install CS3 cause my internet connection fails?

  He shouldn't be doing, but this is the forum for Photoshop Elements.

  You should try to ask in general Photoshop forum covering the CS3.

  General discussion of Photoshop

  I suggest that you give the details of your operating system and describe the problem a little more in detail. What error messages you get?

  Brian

• Can software update on iphone cause problems when my computer can only move to Mountain Lion?

  Can software update on iphone cause problems when my computer can only move to Mountain Lion?

  When my computer can only be upgraded to Mountain Lion?

  Any Mac that can run Mountain Lion can run El Capitan, as long as the conditions are identical.

  

  Too little information: you must identify the model of your iPhone and explain exactly your problems. There is no way that anyone would be able to help otherwise.

• Firmware update recent Airport 7.6.7 causing problems with VoIP

  Hi all

  Firmware update of recent Airport 7.6.7 causing problems with VoIP.

  Unable to connect voip since update...

  Any help appreciated.

  Thank you

  It might be useful to know what VoIP that you use and what type of problem the update affects your VoIP.

  My MagicJack & NetTalk lines properly.

  Jim

• in iBooks author, how can I change the book ID?  I update often books and hand but ID remains the same, so it caused problems when others discover.  I wish it were as if it were a new book with a new code.

  in iBooks author, how can I change the book ID?  I update often books and hand but ID remains the same, so it caused problems when others discover.  I wish it were as if it were a new book with a new code.

  From the link 'related items' below, see:

  Give your book a new internal ID.

• It will cause problems if my new iMac has the same id and password that my old iMac that I still have and use

  It will cause problems if my new iMac OS 10.11.3 5 k has the same user id and password as my old 2008 imac OS 10.9.5

  No it just means that you can download and sync past purchases and data to iCloud