Installing oracle 11g (RAC) on RHEL 6

Similar Questions

• Install Oracle 11g R2 on RHEL 6

  Hello

  I'm trying to install Oracle 11 g R2 on RHEL6 using VM Ware workstation. I went through all the controls preinstallion and now want to create directories to hold the oracle software.

  My UNIX box has only one primary partition which is the root partition (/).

  Now the Oracle documentation on installing LInux say the following commands must be executed.

  # Pei mkdir /mount_point/app/

  # chown r oracle: oinstall /mount_point/app/

  # chmod 775 r /mount_point/app/

  For example:

  # mkdir -p /u01/app/  
  # chown -R oracle:oinstall /u01/app/ 
  # chmod -R 775 /u01/app/  

  I want to know is the following, which one should I get about this

  (a) create a new partition, make a new file system and then mount it on the directory/U01

  or

  (b) create a/U01 directory in the root (/) directory using mkdir and just go ahead with the installation without any additional partition or file system.

  Thank you.

  Hello

  as you use this machine in a virtual machine, you can simply create the folder with mkdir. The need for the mounting points on the various devices becomes relevant for productive environments due to performance reasons.

  / Florian

• Install oracle 11g Client in an application server (HP - UX 64-bit operating system)

  I'm going to install oracle 11g client in an application server (HP - UX 64-bit operating system)
  I have to create the new mount for client installation point?
  Through the application server, I will access (rac) database server.
  
  I have enough space available in / or root mount point.
  I have space in / opt mounting point, can I make a directory in/opt/OU1/app and install the client at this place in the access database?
  
  
  
  Thank you
  Solaiman

  876149 wrote:
  I'm going to install oracle 11g client in an application server (HP - UX 64-bit operating system)
  I have to create the new mount for client installation point?
  Through the application server, I will access (rac) database server.

  I have enough space available in / or root mount point.
  I have space in / opt mounting point, can I make a directory in/opt/OU1/app and install the client at this place in the access database?

  Thank you
  Solaiman

  You can install in any desired point of installation/directory. Oracle does not give a flying fig this topic. Just put it somewhere that makes sense.

• Oracle 11g RAC can support 2 separate databases?

  1. can you Oracle 11 g RAC support 2 separate databases because it requires to SCAN ip cluster with a port number unique listener?
  2. Oracle 11.2 database connections will work correctly if I install a mandatory DNS server in Oracle RAC servers?
  I'm leading a team for a project of 11g and appreciate the answers.
  Thank you
  Satish.

  Oracle 11g RAC will support the 2 separate databases because it requires to SCAN ip cluster with a port number unique listener?

  YES

  Oracle 11.2 database connections will work correctly if I install a mandatory DNS server in Oracle RAC servers?

  YES

• Installing Oracle 11g Release 2 on Centos

  Hello

  I just bought a cloud computing system and wish to install oracle 11g. My OS is CentOS / 6.0 - 64 and minimal for the CCI. Can you please any good tutorial/doc to install it?

  Thank you in anticipation

  ChristyH. wrote:

  Is there someone who can install oracle for me?

  Best regards

  You will need to find consulting companies in your area to do it. If you always use CentOS, they recommend most likely you are using a supported operating system version

  HTH
  Srini

• Help me! Impossible to install oracle 11g on ubuntu

  Hello I am a student, I am a student of oracle database 11g, but I encountered a bug like
  http://Nguy-Hiem.co.cc/12.PNG
  
  I try to fix it and I start fixup.sh, but
  
  root@hieukenpro-virtual-machine:/tmp/CVU_11.2.0.1.0_oracle#./runfixup.sh
  Answer file used is:./fixup.response
  Activate used file is:./fixup.enable
  Location of the log file:./orarun.log
  *. ' / fixup.response: line 11: Unexpected EOF while looking for matching ' ' ' *.
  *. / fixup.response: line 12: syntax error: unexpected end of file *.
  *. / fixup.response: line 12: warning: syntax errors in. or eval will cause future versions of the shell to abandon as Posix requires *.
  Definition of parameters of the kernel... *.
  * uid = 1001 (Oracle) gid = 1001 (oinstall) groups = 1001 (oinstall), 1002 (dba) *.
  * oracle hard nproc 16383 *.
  * Couldn't find /etc/security/limits.conf or answer fichier.* MAX_PROCESSES_HARDLIMIT
  * oracle hard nofile 65535 *.
  * Couldn't find /etc/security/limits.conf or answer fichier.* FILE_OPEN_MAX_HARDLIMIT
  * oracle soft nofile 1023 *.
  * Couldn't find /etc/security/limits.conf or answer fichier.* FILE_OPEN_MAX_SOFTLIMIT
  
  so, what should I do?
  Thank you!
  
  Published by: 837251 at 16/02/2011 05:14
  
  Published by: 837251 at 05:17 16/02/2011

  Oracle 11g does not support Ubuntu. It can be installed, but it requires around Word:

  Re: Installing Oracle 11g R2 on Howto Ubuntu 10

• install oracle 11g r2

  Hi people, please specify a good link to install oracle 11g r2 on the computer windows XP client
  
  and also the steps how to install
  
  Thanks in advance

  Salvation;

  All the installation guide canbe to 11 doc librart g which is available at:

  http://www.Oracle.com/pls/db112/homepage

  Also, see, and check below doc of steps the thread mention etc.

  11 GR 2 on Windows XP installation problem
  Re: problem installing 11 GR 2 on Windows XP

  Respect of
  HELIOS

• How clearup unsuccessful installing oracle 11g R2 on redhat linux 5

  Hello world
  
  Try to install oracle 11g R2 on the test server Red Hat linux 5 (according to the quick installation guide), I did the following tests:
  
  trial (1): failed by giving the file not found error. I discovered that I need to I have unzipped the source files in a dir.
  (2) trial: failed because there is no static IP address
  trial (3): failed because that/etc/hosts was not set correctly.
  
  the installation was supposed to be in default dir/home/oracle/app
  the problem is that before every test I just renamed app app_old and once again the new installation with the default settings.
  
  I have now to clearup this whole mess, I know this isn't simply deleting the directory created, because I need to free the RAM memory reserved for the crteated of databases in all previous installations.
  
  Help please,
  Thanks for your time

  Hi Alain;

  Similar topic discussed here before. Please check:

  Uninstall db Oracle 11 g r1 OS linux 5
  Uninstall db Oracle 11 g r1 OS linux 5

  How do I uninstall datbase 11g
  How do I uninstall datbase 11g

  Respect of
  HELIOS

• Oracle 11g RAC installtion

  Hello
  
  I would like to know how to install Oracle 11 g RAC by using the virtual machine.
  
  material:
  RAM: 8 GB
  Hard drive: 320
  CPU: i5
  
  above hardware is compatible for oracle 11 g RAC?
  Please suggest.

  996253 wrote:
  Hello

  I would like to know how to install Oracle 11 g RAC by using the virtual machine.

  check the link below.

  http://www.Oracle-base.com/articles/11g/Oracle-DB-11gr2-RAC-installation-on-OL5-using-VMware-Server-2.php

  material:
  RAM: 8 GB
  Hard drive: 320
  CPU: i5

  above hardware is compatible for oracle 11 g RAC?
  Please suggest.

  Yes, you can install the help above HW.

• No oracle support for oracle 10g RAC on RHEL 5.3?

  Hi all
  I have no oracle support. I need this information juice to my knowledge.
  could you get it someone please let me know if oracle supports Oracle 10 g RAC on RHEL 5.3?
  or on any version of RHEL 5.
  documentation on tahiti has no mention of RHEL5.
  
  Thank you
  Arvind

  Both Oracle 10 g 2 and 11g RAC are supported for RedHat Enterprise 5 on versions 32 and 64 bit. It's really some information that should be available outside metalink (for people like you who are not yet customers).

  Hope this has helped
  Bjoern

• Deployment of Oracle 11g RAC Release 2 with IBM midsize V7000

  At and deployment 11g rac with IBM midsize V7000 san with aix 6.1
  Is this possible using Oracle CRS without going to the OS like GPFS cluster

  lbn76 wrote:
  At and deployment 11g rac with IBM midsize V7000 san with aix 6.1
  Is this possible using Oracle CRS without going to the OS like GPFS cluster

  Oracle Grid these days use ASM starts for vote and register files storage. So no need for a cooked cluster file system that must be mounted by all nodes. No need either directly with a gross storage logical unit number.

  ASM uses the LUN of the matrix of storage/SAN directly (as devices of rough blocks).

  Generally however, there are several I/O paths to that LUN on the SAN - in which case there is more than 1 device level o/s for this LUN. Multipath driver s/w addresses this and creates a logical (and redundant) device that sits at the top of several devices of i/o path to the level of the o/s.

  You configure ASM to use devices of paths multiples (as devices of rough blocks) - and applying exterrnal, normal or high redundancy necessary when creating starts on these logical multipath devices.

  The grid s/w and RAC database instances can then use ASM starts as cluster storage.

  This makes storage much easier layer management - and also provide a number of useful features too.

  This is also the approach recommended by Oracle Corp. for RAC - use ASM under the layer of management of storage between storage LUNS in the table and one side and CARS on the other.

• Installing Oracle 11g with ASM

  Hi all
  
  I'm new with oracle 11g and I want to create a database with ASM and I can't get there.
  Could someone tell me the step to make or send a link here?
  Fact the below steps
  1 - install the software oracle only
  2. install and configure grid infrastructure
  3. create the database with asm
  
  Thanks in advance

  Salvation;

  Please check the docs below for steps

  http://www.Oracle.com/technology/products/database/ASM/index.html
  http://www.Oracle-base.com/articles/11g/AsmEnhancements_11gR1.php
  http://www.pafumi.NET/RAC11g_and_ASM_on_VMware.PDF

  Respect of
  HELIOS

• use of temporary space in oracle 11g rac

  Hello

  Oracle version: oracle 11g r2

  OS: linux

  storage: asm on exadata

  Please help us understand the use of the temp

  {code}

  SQL > set linesize 1000
  SQL > set pagesize 1000
  SQL > col USERNAME format a20
  SQL > col SPID format a10
  SQL > col MODULE format a30
  SQL > col PROGRAM format a30
  SQL > SELECT s.sid, s.serial #, s.username
  2, p.spid, s.module, p.program
  3, SUM (su.blocks) * tbsp.block_size/1024/1024 mb_used
  4, su.tablespace
  5. FROM v$ sort_usage su
  6, v$ session s
  dba_tablespaces tbsp
  7, $v 8 p process
  9 WHERE su.session_addr = s.saddr
  10 AND su.tablespace = tbsp.tablespace_name
  11 AND s.paddr = p.addr
  GROUP 12 OF
  13 s.sid, s.serial #, s.username, s.osuser, p.spid, s.module,.
  14 p.program, tbsp.block_size, su.tablespace
  15 ORDER BY s.sid;

  USERNAME SID SERIAL # SPID MODULE PROGRAM MB_USED TABLESPACE
  ---------- ---------- -------------------- ---------- ------------------------------ ------------------------------ ---------- -------------------------------
  11 2092 DBSNMP 2861 emagent_SQL_oracle_database Oracle @ [email protected] 8 TMP4

  SQL > select * from v$ temp_space_header;

  FILE_ID BYTES_USED, BYTES_FREE BLOCKS_FREE RELATIVE_FNO BLOCKS_USED NOM_TABLESPACE
  ------------------------------ ---------- ---------- ----------- ---------- ----------- ------------
  TMP1 2 + 12 222274816 33554432 2048 1024 3.6418E
  TMP3 4 + 11 19283968 75497472 4608 1024 3.1595E
  TMP4 5 + 11 19687936 0 0 1024 3.2257E
  TMP5 6 + 13 688638464 0 0 1024 1.1283E

  {code}

  Why isn't bytes_used reclaim as only 8 MB is currently using

  Thank you

  PMP

  I wanted to tell temp is never off allocated. So, if a 'bad' query explodes temp. the only thing you can do is to create a new and drop the old one.

  11 GB temp is clearly ridiculous. Usually, this is caused by the merge join Cartesian paths in your instructions.

  -----------

  Sybrand Bakker

  Senior Oracle DBA

• Installing Oracle 11g on Oracle Linux 5.10

  Hi all

  When installing Oracle 11 g R2 in Oracle Linux 5.10 I get the error message: no such file or directory

  
  

  ---------------------------------------------------------------------------------

  [data info@localhost] $ ls

  doc installation RPM runInstaller stage www sshsetup response

  [data info@localhost] $./runinstaller.sh

  bash:. / runinstaller.sh: no such file or directory

  [data info@localhost] $

  -----------------------------------------------------------------------------

  Please suggest.

  What is the path of your runInstaller.sh? This path contains spaces? If so, to remove these spaces, and then try again.

  Also have you created (an oracle oracle owner) of the user? You must install with this user...

• Installing Oracle 11g R2 on Oracle Linux 6.4

  Hi all

  I want to install Oracle 11 g on Linux platform.

  I installed Oracle Linux 6.4 on my pc using the virtual machine VM. The host OS is Windows 8.

  When I try to install Oracle 11 g (using the rpm file) it gives the error: the package is not compatible with this system. Valid architectures are ['i686', 'i586', 'i486', 'i386', 'noarch'].

  When I checked the sound system architecture: i686.

  Please suggest.

  Thank you

  Maeva.

  PL post a link to the binaries guest OS that you have downloaded, and also a link to the binary file of GR 11, 2 you have downloaded. Note that only 11.2.0.3 pl and 11.2.0.4 are certified on Linux 6.x - Oracle & reg; Database

  These versions are only available on My Oracle Support for customers with a contract of paid with Oracle support. If you have downloaded the 11.2.0.1 freely available version, then you will need to use Linux 5.x

  HTH
  Srini