installtion with forms 11g problem

Similar Questions

• Problem with forms 11g

  Hi all
  I installed 11g on Win2003 R2 Forms and the facility is clean and everything works fine. The WLS_FORMS starts without a problem on port 9001 and when I asked his status through the http://localhost:9001 / forms he answers forms listener is running. My problem is that when I try to run my simple form I created by form 11g, the browser page comes with nothing in it. It shows no error message or anything that might be useful, and it does not show the form either!
  The URL that has been set in the forms preferences > DURATION is
  http://[machine_name]:9001/forms/frmservlet?config=other
  'Other' is a section of configuration in formsweb.cfg that I created to be able to run my forms from inside the form builder
  and it contains the following:
  
  [others]
  separateFrame = False
  LookAndFeel = generic
  UserID = scott/TIGER
  form = module1.fmx
  
  Does anyone have an idea?
  
  My best,
  Alireza Vali

  There are many ways in which you can host the plug-in on your own server. The easiest way would be to store the installable in the same Oracle home, in a directory that is already set up with a virtual path. For example, the directory of java forms. Then simply set up your formsweb.cfg to point to your own file rather than the distance.

  Thus, for example in 11 forms, follow these steps:

  1. download the JRE 32 bit on the Java website (http://www.oracle.com/technetwork/java/javase/downloads). For example, 1.6.0_24 is as follows: jre-6u24-windows - i586.exe

  2. copy this file to: C:\Oracle\Middleware\as_1\forms\java

  3. change the configuration of your web (formsweb.cfg) to reflect the change. So, something like this:

  jpi_classid=clsid:CAFEEFAC-0016-0000-0024-ABCDEFFEDCBA
  jpi_codebase=/forms/java/jre-6u24-windows-i586.exe#Version=1,6,0,24
  jpi_mimetype=application/x-java-applet;jpi-version=1.6.0_24
  #
  # YOU NEED TO CREATE A DOWNLOAD PAGE AND STORE IT INTERNALLY FOR NON-IE USERS
  # THE SAME METHOD COULD BE USED - STORE YOUR HTML PAGE IN THE JAVA DIR OR OTHER VIRTUALLY MAPPED LOCATION
  jpi_download_page=/forms/java/myJREdownloads.htm
  

  For anyone interested to download from a remote server, here are the necessary details for other versions:

  http://www.Oracle.com/technetwork/Java/JavaSE/AutoDownload-140472.html

  All the information above applies to earlier versions of forms too.

• Problem with forms 11g with Windows 2003 Server

  Hi friends,
  
  I tested compatibility of oracle 11g in various version today, I installed in windows server 2003 has increased with the same installation that I did for my windows XP that has worked well. Now, I started the server http for forms and then opened my application forms and create a simple forms when I press the 'Run the form' button all I get is page not found that any suggestions would be welcome.
  
  I've already updated my java and it is a new installation of forms 11g.
  
  Kind regards
  Manoj Chakravarthy

  make one
  opmnctl startall
  of $OI/bin as well and check...

• legacy in form 11g problem

  Hello

  I recently migrated from 10g to 11g a forms application. (OS is Windows server 2008).

  I have problems to display the icons on the toolbar.

  The toolbar is inherited from a group of objects in a model module.

  I tried to recreate a new module and inherit from the toolbar

  When I try to inherit directly from the Group of objects, the button are created in the radio button group and not the command button.

  When I try to inherit from the canvas and the block of the module Template, command button are created, but the dimension are wrong.

  Issues such as someone with experience?

  Thans

  Yves

  Yves,

  I've not met, but your description makes me think that you did not convert your dependent objects.  Have you done all your dependent objects (Object Library, Template.fmb, etc.) have been converted to form 11g first?

  Craig...

• Oracle Discoverer 4i (Portal db - oracle 8i) connectivity with database 11g problem

  Hi all

  We have oracle discoverer 4i with Portal db (oracle 8i).

  Connect to external databases by using links in the portal db db and reports will use the link db to retrieve data from views in external databases.

  External databases, we have been connecting is oracle 10g version and now we have improved these databases to version 11g.

  Now I have a created a new database link to this 11g database and I have created a new EUL in the portal to connect to this database 11g.

  But when I try to create a report using the discoverer of this new EUL after login for the discoverer we get an "Unable to connect to the database" error.

  We all have the privilege of necesscary to the user and the new database link works perfectly well. (when we try to query directly using SQL as database portal using this db link the query works perfectly).

  I'm not sure if it is a compatibility issue in accessing an 11g database since oracle disk 4i.

  Can any advise if this is the case and if there is no work around for this?

  Kind regards

  REDA

  You say that you are having problems with a link of database from 8i to 11 g (pl exact position of 4-digit versions)? If so, expect as database of links between these two versions are not supported. Is there a reason you can't pass the portal of databases of at least 10 g 2?

  See MOS Doc 207303.1

  HTH
  Srini

• Database 11g r2 with forms 6

  We can connect orace database 11g release 2 with forms/States, 6.

  No you can not connect oracle database 11g r2 to forms or reports 6.
  Forms and reports builder 6/6i support for 10 g.
  so you have to shoft your forms and the report on the developer 10g or heigher costume.

• Can I use Oracle Forms 11g with 9.2.0.8.0 Data Services?

  Hello world.
  
  My Department is evaluating the development tools to create new web applications and possibly migrate current buit applications with Oracle Forms 6.0.5.34.0. Our database is Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64 bit.
  
  We read that the new version of Oracle Forms is Oracle Forms Services 11 g. Is Oracle Forms 11g compatible with Oracle9i Enterprise Edition Release 9.2.0.8.0 Services - 64 bit? or we will have to migrate our Oracle 11g RDBMS?
  
  If our database is compatible, what would we have needed to develop and deploy applications with Oracle Forms 11 g Services?
  
  Thanks in advance.

  That it is compatible or not: 9.2.0.8 database is supported, which means you get patches for it. So even if it's compatible I would opt to upgrade to a newer version, because I wouldn't feel uncomfortable that the product is not supported by out in production.

  Take a look at the matrix of certification for the supported configurations
  http://www.Oracle.com/technetwork/middleware/downloads/FMW-11gr1certmatrix.xls

  With regard to the requirements; most of the stuff is on the forms OTN homepage:
  http://www.Oracle.com/technetwork/developer-tools/forms/

  or to the documentation:
  http://download.Oracle.com/docs/CD/E17904_01/index.htm

  see you soon

• Problem with form of smartview

  Hi all

  
  We have recently migrated Hyperion Planning 11.1.1.3 application to a newer version of 11.1.2.3 and many workbooks are saved with forms of the old version 1.3 smartview.
  When we try to open the saved form, it tries to connect to the old version 1.3, and we see no possibility to change the details of the connection here.

  How easily update us the connection to 1.2.3 and open / save the form in the new version?

  Thank you

  Michel K

  Hi AravindhK,

  I went through the same process, a few months ago, and according to the number of MS Excel workbooks, it is really easy - although a tedious might say - to the convert\migrate the leaves of ad hoc recovery overall.

  1. make sure that the URL of the shared connection is set to point to the new HP v11.1.2.3.x.

  2. open a MS Excel spreadsheet to be repointe

  3. from the main Ribbon bar, click Smart View > Panel

  4. in Smart View Panel, locate and then click [content Document] by clicking on the arrow pointing down icon

  5. a list of all the worksheets connected display then

  6. right click on each definition of the connection, and then select [change the connection]

  7 select the new connection APS URL from the drop-down and then click the [next] button

  8 go again cube HP, and then click [finish]

  9. Repeat steps 6 through 8 as needed

  10. save the MS Excel workbook

  11. click on the button [update] on each worksheet containing a form\adhoc retrieval\submission

  The same principle applies to forms and worksheets adhoc retrieval\submission.

  See how you go.

  JBM

• apex 4.0 with oracle 11g ee mail

  Hello
  
  I spent when you work with apex 3 I could work with apex mailsend very nice.
  Apex 4.0 with oracle 11g ee, I'm not able to send emails any more.
  
  Last error message in the queue is:
  
  ORA-29279: permanent SMTP error: 550 via this server without authentication.
  the smtp server has not been changed, the code is very well
  
  How can I go further?
  
  Thank you very much
  Florin

  Florin,

  Make sure that you use the relevent to instructions for your version.
  If you use 4.0 - you probably want the same script - with use of APEX_040000 appropriate.

  See the steps of INSTALLATION of document ITEM.

  http://docs.Oracle.com/CD/E17556_01/doc/install.40/e15513/otn_install.htm#CBHBABCC

  -Make sure that you don't drop the former users of apex framework before update or remove them from the ACL. It can cause you problems.

  -Tim St.

  P.S. Take a minute to update your profile so that your name is clear.

  Published by: Tim St. H., December 11, 2012 16:54

• JDev11G Vs Oracle Forms 11G

  Hello
  
  When it comes to the infrastructure to build an application on what benefits haver us with JDev11g forms 11g.
  
  Published by: OracleBabu on June 16, 2011 07:24

  Forms and require all two JDev/ADF FMW, or maybe I can be more specific and say that you need a license of FMW. Oracle Forms is accredited to work on Oracle FMW and you pay a license for it. For the ADF, you can deploy on a server of Oracle applications no, but you must still license FMW - but it is possible that the actual cost is less than the license of forms (but depends on).

  Here is my point of view - if you have loads of skills of forms and are already building Forms applications then it would be wise to consider forms. However, you might (and certainly consider) a long-term JDev/ADF. It could be a stand-alone well-defined project could be the perfect testbed for redevelopment of the ADF. The other point to consider is that this demand will be doing, how it will be used, and how it will be architected. If you are looking for expanded internet "self-service" applications and forms, then maybe isn't just for that. If you want to use BPM or Web Center then maybe JDev is better suited.

  Just think if you were doing some DIY, you start by saying "I'll use a hammer, okay, now what's the problem"... .or you would say "what problem am I trying to solve and what tool works best. After all, if you choose a hammer and what you want to do is paint a room then its going to be very difficult for you! (o).

  Concerning
  Grant

• Performance impossible forms 11g Application in Mozilla 3.6

  Hi all.
  I have one problem (another problem) with OFM11g. The problem is that do not run the application forms in a browser Mozilla 3.6. The time of execution of the
  URL, the message is still "additional plugins are required to display this page." The manual installation is a java page to download the jre 1.6.12, but I install this components and Don t work.
  
  
  There is Solution to this problem?
  
  
  Thank you!
  
  
  F.F.: In IE8 works OK and Google Chrome also. But in Mozilla don´st to run.

  Which versions to have located in the formsweb.cfg?

  # jpi_classid is used by iexplorer; it will run with any JPI >= 1.6.0_01
  jpi_classid=clsid:CAFEEFAC-0016-0000-0001-ABCDEFFEDCBA
  # jpi_mimetype is used by mozilla based browsers like firefox; when omiting the version any java plugin can be used
  jpi_mimetype=application/x-java-applet
  

  If my memory is the default jpi_mimetype of a forms 11g installation is set to 1.6.0_12 13 or something:

  jpi_mimetype=application/x-java-applet;jpi-version=1.6.0_12
  

  Firefox is accurate when it comes to Versions of YPI. While 1.6.0_12 is specified in your mimetype, it will only work with Version 1.6.0_12. Unlike Iexplorer, it won't work with superior installed versions (iexplorer uses by default the most recent version to run the cmdlet, you must specify the minimum version you want to use as jpi_classid) or run it with lower versions.
  So you could simply omit the YPI-version (I did this because I don't want to disturb when you install a new YPI) or specify the exact version you are using that is 1.6.0_18 or 1.6.0_19.

  concerning

• Forms 11g, WebLogic and NodeManager

  Hello

  I'm relatively new to form 11g. I am doing an installation in development mode, and all works well.

  In my setup, I have to run little web - app (servlet). With iDS10g, I use Tomcat for this. Now, I try to use WebLogic. If in the WebLogic Console, I create a new 'server', listening on port 8080.

  First question, so I want to run this server, I start Node Manager (I've never used before...). Why?

  I deploy my war files and works very well.

  Now I restart WebLogic and my new 'server' stay stopped. I must launch NodeManager to run it...

  Is second question, possible that my "Server" runs automatically at startup of WebLogic? And if possible, without having to run NodeManager?

  Thank you!

  Olof wrote:

  Hello

  If in the WebLogic Console, I create a new 'server', listening on port 8080.

  First question, so I want to run this server, I start Node Manager (I've never used before...). Why?

  I deploy my war files and works very well.

  I guess here that you have created a new server managed your installation of development? Technically speaking there is not much difference between the AdminServer and the managed server; for a development environment, I would save me the hassle of 2 developing weblogic servers so I don't know what you're trying to achieve? (to be honest I really don't get the point of having 2 managed servers for execution of the Servlets 3 in production either, but that's another story)

  You can deploy your war on the AdminServer files as well - in forms 11.1.2 Oracle who done with servlets forms and reports both in development mode so there is nothing wrong with that. Instead to access your Application via Port 8080, you simply access it via port 7001 (or whatever port you used for AdminServer). No need to NodeManager – just start the AdminServer.

  If you really want to use a server managed, with that you could start it upward the script startManagedWeblogic.cmd in the same directory that the startWeblogic.cmd is located (just pass the name of the managed server). But still - I don't see why it is not necessary to use a server here.

  In production, you can choose to deploy your war AdminServer, WLS_FORMS or WLS_REPORTS file. If you configure OHS respectively it shouldn't matter much.

  see you soon

• "a regular basis" to run a report form 11g

  I'm migration 6i c/s to 11g web app.

  I will have some difficulty in understanding how reports work now:

  In 6i, I used to code calls with run_report_object or even run_product built-ins, and the report went straight to the user's screen or printer.

  (Now I have seen that you can not send it directly to the printer, but we can live with that).

  Now I use the solutions I've read discussions like this:

  https://community.Oracle.com/thread/2184172

  My work is as follows:

  PROCEDURE Pf_Run_Report_Object (p_report_id REPORT_OBJECT) IS
  
    l_report_server varchar2(100);
    l_rep_out   VARCHAR2(100); 
    l_report_job_id VARCHAR2(100);
    l_report_status varchar2(100);
    l_wait date := sysdate + (5/1440);
    Begin
     tool_env.getvar('REPORTS_SERVER_NAME', l_report_server);
     IF l_report_server IS NULL THEN
      Raise Form_Trigger_Failure;
     END IF;
  
  
     Set_report_object_property(p_report_id, REPORT_SERVER, l_report_server);
  
    Set_Application_Property(CURSOR_STYLE, 'BUSY');
    l_rep_out := RUN_REPORT_OBJECT(p_report_id); 
  
    l_report_job_id := Substr(l_rep_out, instr(l_rep_out,'_',-1)+1);
  
    l_report_status := REPORT_OBJECT_STATUS(l_rep_out);
  
    WHILE sysdate < l_wait AND l_report_status IN ('RUNNING','OPENING_REPORT','ENQUEUED') 
    LOOP
         l_report_status := REPORT_OBJECT_STATUS(l_rep_out);
    END LOOP;
  
  
    IF l_report_status = 'FINISHED' THEN
    WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid='||l_report_job_id||'?server='|| l_report_server,'_blank');
    ELSE
    MESSAGE('Report error: '||l_report_status);
    END IF;
  
    Set_Application_Property(CURSOR_STYLE, 'DEFAULT');
  
    End Pf_Run_Report_Object;
  

  All hardcoded that names of statutes and the property url... seem like a bug ticking. Also the loop 5 min... Don't like.

  It works... but it seems so crappy that I can't believe this is the usual way to simply run a report:

  How do you call a report in form 11g?

  I would recommend that you start here:

  http://www.Oracle.com/technetwork/Developer-Tools/Forms/documentation/integrating-forms11g-and-reports11g-1905204.PDF

  Here's what happens:

  1. your forms application requests that a report (rdf, rep, etc.) is executed. (Running is not identical to present)

  2. once the report is run and the data has been retrieved, the output is stored on the file system of the server in the format that you define (html, pdf, etc.)

  3. your Forms application can now retrieve the complete report when desired using the JobID reports.  WEB. SHOW_DOCUMENT is most often used, but other extraction methods are possible.

  As to why you coded a timer in the code, I can't speak for it, but you don't need.  Yet once again, refer to the doc above and it will explain how to launch and retrieve a report.

• Oracle Forms 11g - OFA - ADF Developer?

  Hello

  I am a newbie in these conditions and therefore don't know much about the difference...
  I finished the developer of the OCA and now I don't know what to choose then?

  what I've seen online on the next certification path is
  http://education.Oracle.com/pls/web_prod-plq-dad/db_pages.getPage?page_id=5001 & get_params = p_exam_id:1Z0 - 151 & p_org_id = & lang =

  It's Oracle Fusion Middleware 11g: create Applications with Oracle Forms

  
  also, I've seen some good hype about FAD and OPS being newbie I don't know what is the difference or either I can't find all of them in the lists of Certification.
  which I suppose is OAF is the same as Oracle Fusion Middleware 11g: create Applications with Oracle Forms

  but where is the certification of the ADF? any link

  also what to choose regardless of what I have in mind.

  Thank you

  Concerning
  Hassan Siddique

  (1) I guess there not available for OFA certification. However there is available land (Oracle University)

  (2) well, for that you need first to decide. you want to stay with forms and develop in sql, PL/SQL (learn more about the DB), then forms is the way to go. If you enjoy working with java and develop J2EE applications, you should work with ADF. OAF I don't know much about it other that it's built on an older version of the ADF, but is more suitable for E Business Suite (it has not used both in the open community).

  Timo

• Get url from the browser form 11g?

  Is there any function to get the current url of the browser that is running in applet form 11g?
  Or at least the server part: port?
  
  Thank you

  In version 11, you can use javascript to retrieve the url of the browser. For example:

  Declare
       JS_in      varchar2(32767);
       rtn     varchar2(1024);
  Begin
       -- JS_in is the javascript funtion you want to call.
       JS_in := 'location.href';
       rtn := WEB.JAVASCRIPT_EVAL_FUNCTION (JS_in);
       -- "rtn" should contain the complete URL as seen in the browser address bar.
       -- Do something with rtn.
  End;