Instructions for?

Similar Questions

• Instructions for managing macs w ARD on the internet (no static IP address)

  Please excuse me if it's asked all the time, but I searched and can not find detailed instructions for this.

  I need to manage more than one Mac, on connections to the internet, the devices will not be on the static IP, they will constantly be moving around.

  All the videos I have found online seem to show how to connect and manage Macs on LANs w ARD.

  Details:

  ARD v3.8

  All Mac on El Capitan

  Very appreciated for any help!

  This question is not particularly related to Apple Remote Desktop; for ARD.  This is a configuration of generic firewall and networking question, so good enough instructions for your specific firewall will work here, as long as the firewall can redirect ports - port TCP 5900, in this case - or if your particular firewall has a VPN - Firewall Server average range and high-end frequently - or if you can implement a VPN server behind your firewall and configure the firewall to forward the VPN protocols (different ports) and ports necessary for the particular VPN.

  In general...  I would suggest three ways...   1: set up your firewall to port before port TCP 5900 to the client target.   Maybe TCP 5988.   Or set up a VPN server in your firewall and connect to that and use ARD via a VPN.    If you want to access more than one system on the target network, you will need to either use a range of ports to forward to specific systems behind your firewall and happens to be a problem with many customers - I don't know immediately off-hand if the ARD client allows even to select different target ports - or to set up and move to a VPN.    2: creation and configuration of the VPN server in the firewall allows access to all systems on your network target - a VPN connection makes your local system as it is directly connected to the target network.  3: If you have the VPN server running on a target system and accessible through the firewall port forwarding, this target system must always be available, and all VPN traffic is routed through this system.   It is more complex and can also be a bit difficult to set up.

  If you directly expose ARD ports to the Internet via port forwarding, you'll want to either restrict the available source IP ports (to reduce the magnitude of the attackers), and you'll want to be very careful about passwords on target systems.   Ports of the ARD are detected very fluent, and several people and botnets will attempt to access the system password-baited; trying to guess the users and passwords on the target system.   Once attackers have a login and a password, they will then try to spread throughout the rest of the network.  (It's part of why I prefer to use virtual private networks).

  Sierra of MacOS support PPTP VPN, so I wouldn't go with any configuration of VPN that you considered it.   I'd probably use L2TP/IPsec, because the customer is generally available in most of the other operating systems, Mac OS and iOS.

  There is information available on the network ports used by Apple devices.   If you enable VPN port forwarding, there are discussions on the ports and protocols required to according to VPN you use posted around the ' net and not all firewalls is particularly good to port-forwarding, the protocols and ports VPN. "  Low-end older firewalls and firewalls tend to have problems here.

  To locate on the networks of the target systems, you get to use dynamic DNS from client devices or other means to identify the public IP address that is associated with the target customer.   If customers are roaming on disparate networks and not simply roaming IP addresses on their private networks (these addresses can be fixed through DHCP configurations, too) and if you don't have access to intermediate firewalls, then you will probably have to rethink the entire approach, unfortunately.    Connection to mobile systems distance arbitrary is not especially it is possible, he must do something on the client that "tags" or "ad" its network metadata to your own server from tracking client or server monitoring of some other entity (for example messages to the DNS servers used by the dynamic DNS providers), or the management connection must be initiated from the client.    ARD does not support these mechanisms.   Discussions here can get pretty complex, too--in terms of network configuration, both in terms of security for the clients and servers.

  There are a few related discussions this general topic in the forums. See here, here, here, here or here.

• are the same instructions for the migration of outlook 2003 data as they are in your instructions for outlook 2007

  The site gives instructions for mobile information e-mail from Outlook 2007 to Thunderbird, are these instructions applicable to Outlook 2003? In other words the instructions will work on Outlook 2003, that I have, or are there different instructions to move the contents of Outlook 2003 to Thunderbird?

  All versions of Outlook import in Thunderbird the same way.

  They need for Outlook must be installed and only the PST files in the default outlook defined and loaded in Outlook will be imported.

• Instructions for AMPERAGE satellite 1905-S303 CPU fan

  Hi guys,.

  First of all thank you for your help in advance.

  My fan is this similar to a buzzing noise, but not very much. Almost as if something interferes here or something is loose.
  It can also feel vibrations final on my wrists resulting from the present.

  The computer itself works well no problems. And fan of stitching to do this work, however since his on and outside the usual tricks.
  I get the feeling, it must be emphasized in working well.

  It was that don't happen at the initial start upward and the problem would go sounds fan away quickly to normal.
  Now this noise/vibrations come all the time every time that the fan starts.

  More fan calls, more noise/vibration.

  In any case I tried to blow out with compressed air to clean it. But nothing has changed.
  That's why I want to open it up, take it out, maybe clean it or see if something is loose. Or maybe replace it.

  That's why I'm looking * instructions on how to replace the fan on my Satellite 1905-S303 CPU *.
  Does anyone know all the instructions I can follow? I couldn't find anything on the Toshiba support site.

  (Or instructions for a computer similar to mine at least?) (Or something that might help?)

  Thanks a lot guys! I really appreciate you!

  > My fan is this similar to a buzzing noise, but not very much. Almost as if something interferes here or something is loose. It can also feel vibrations final on my wrists resulting from the present. The computer itself works well no problems. And fan of stitching to do this work, however since his on and outside the usual tricks.

  In this case, I would not recommend to disassemble the laptop just to check if the fan is ok or not
  I mean disassembly of the laptop is really a delicate procedure and there is a risk of damage to the part.

  However, the disassembly instructions are not downloadable on the Toshiba page. I didn t find anything and I think that these manuals are released for service only partners.
  But I think you might find a few details and info on the internet. Use google and search for irisvista.com/tech/

  Good luck

• I lost the toolbar that displays 'file' 'view' 'edit' etc at the top, it is impossible to follow your instructions for using the 'View' option to fix my toolbars.

  I lost the toolbar that displays 'file' 'view' 'edit' etc at the top, it is impossible to follow your instructions for using the 'view' option to fix my toolbars. I have no idea how access toolbars without this toolbar - I can't believe this allows this toolbar to delete (I did accidentally while trying to get an another toolbar restored). Thanks for any help

  Hi toby,.

  on the assumption that you always have access to the navigation bar, right click on the stop button, when the home page is loaded and check the 'Menu Bar' option in the context menu that appears.

  If you need more help see the knowledge base article the Navigation buttons such as back, home, bookmarks and recharge are missing

  Daniel

• How to add adobe reader to sites allowed to be updated? Instructions for Firefox do not work

  I tried to follow the instructions for adding adobe to allowed sites, but sees no yellow bar with edit options in this regard.

  This has happened

  Each time Firefox opened

  == If adobe has announced its last update

  The instructions on the Adobe site are outdated and no longer to the current versions of Firefox and you can ignore these instructions and save the Adobe installer on your desktop and start the installation with a double click on this file.

  See How to change the options to add Adobe to the list of allowed sites

• Firefox Certificate Manager is not listed in the tab view certificate should be. I have instructions for a certificate that requires him to be selected.

  "Firefox Certificate Manager" is not indicated in the certificate of view selection in the encryption tab Instructions for the installation of a certificate of some say to select the Firefox Certificate Manager. But I just can't.

  This has happened

  Each time Firefox opened

  == I searched the tab

  You can click on the "view certificates" button to open the Firefox Certificate Manager.
  Tools > Options > advanced > encryption: Certificates > view certificates

• Need instructions for older iPod

  Please let me know if you have any kind of instructions for the older iPod - one that is approximately 4inches 4 inches,

  See if one of them is the iPod you have. Apple - Support - manuals

• I need instructions for replacing the ink cartridge on my color laserjet pro 100 mfp175nw.

  Can you please send me instructions to replace the ink cartridge on my color laserjet pro 100 mfp175nw.  I have a 126 a cartridge.  Also, where can I get a full manual for my printer?

  Hello revammann

  You can find instructions for the replacement of the cartridge to print here and you can find the user manuals here.

• I want to install Srvc Pack 3 for Windows XP on a computer that is not connected to the internet. I already ordered the Windows XP3 installation CD. Are there instructions for my situation?

  I want to install Windows XP, Service Pack 3 on a computer that is not connected to the internet.  I have already ordered the CD of installation of Microsoft.  When the CD comes, there will be instructions for people who are upgrading from Windows XP, Service Pack 2 for Windows XP, Service Pack 3 on computers that are not connected to the internet?  Are there special instructions for people with my situation?

  HI V - ron,
   
  As you have already ordered for the CD of Windows XP Service Pack 3, you can install the operating system by following the on-screen instructions on the CD at the time of installation.
   
  However, I recommend you to go through the articles given before you install Windows XP service pack 3:
  Steps to take before you install Windows XP Service Pack 3
  Information about Windows XP Service Pack 3

• I was not able to find the instructions for upgrade to Windows 10. The upgrade site says to buy a new PC.

  Original title: upgrade

  I am operating Windows Vista. I was not able to find the instructions for upgrade to Windows 10. The upgrade site says to buy a new PC. Any advice?

  Hello

  You buy Windows 10, as there is no free upgrade to Vista 10.

  https://www.Yahoo.com/tech/s/Microsoft-just-confirmed-Windows-10-pricing-everything-know-114542550.html

  Microsoft on Monday said CNET Windows 10 will cost just as much as its predecessor. This means price for Windows 10 will run anywhere from $110 for Windows 10 Home package at $199 for Windows 10 Pro edition. In addition a Pack Pro 10 will allow users upgrade Home Pro for $99.

  http://www.CNET.com/news/Microsoft-prices-single-Windows-10-licenses-at-119-for-home-199-for-Pro/

  But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.

  https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs

  Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015

  "FAQ Windows 10.

  http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ

  See you soon.

• I have a HP Photomart 5520 printer and I need a book of instruction for the CopyOption parameters

  I bought my first computer at the age of 81 years five months ago.  The provided installation manual

  with the printer has not all the instructions for the different parameters of CopyOption.

  I was wondering if there was instructions that could be sent by post or by e-mail to me?

  Norman Pencille

  [edited by Moderator]

  Hello norman - 99,.

  Welcome to the Forums of HP Support! Congratulations on your first computer, which should be exciting and scary at the same time!

  I see that you are interested in a guide to all the different copy settings and options for your Photosmart HP 5520, there is a User Guide that has information about the copy feature, you will find that here: HP Photosmart 5520 series User Guide on pages 21-24. I know you are probably looking for more information, although not available in the manual, I took the lead and went through the front for you and made a list for you, you'll find it attached (at the bottom of this post) in this way you can keep it for future reference.

  I hope this has been helpful, please let me know if you need more help.

  Thank you

• Instructions for Mac connection to LJ P1102w wireless

  I just bought a new HP LJ P1102w for our conference room to serve a printer without comment thread.  I want to enable wireless printing, but not to join our enterprise network for security reasons.

  I use a Mac 10.6.3, which says that the package and instructions is supported under way of execution.

  I can't do the wireless to connect with my Mac, and there is no instructions for the use of a Mac - only to install wireless by using the CD - that has wireless options or guest.

  Anyone have any ideas?

  I had all the trouble that you guys are self-describing. I then implemented flawlessly on another system. That's what I did.

  1. when I put it up on my own system (laptop #1), when I installed the driver, I checked the box for a set up USB, rather than a network configuration. Maybe it's a difference, I don't know. In any case, when I put it up on top of another system (laptop #2), when I installed the driver (using the supplied CD), I checked the box that says "network printer". Maybe that makes a difference.

  2. I have had no bad USB connection setting.

  3. I then configure for use with an Airport Express station. I unplugged the Airport Express, attached the printer with a USB cable, plugged in and re-installed Airport Express with its installation software (which is on the laptop in applications / utilities / Airport utility). I have reset to factory, but only changed settings two windows: If use with iTunes and confirming the use with the printer (which appeared in the window as Hewlett Packard...). As I went through this procedure, I did a duty to observe that the password was not in WEP and WPA/WPA-2. I concluded the reconfiguration of the Airport Express. Now I connected the USB cable to the laptop Mac #2. I went through the Apple / system preferences / print and fax, has highlighted the LJ P1102w, etc., etc., as it is stated in the Youtube video. I chose the Airport Express as the SSID and used encryption WPA/WPA-2, alphanumeric and entered the Airport Express password. I then closed it all out as it shows in the Youtube video. I plugged the USB cable in the Airport Express. Then, I removed the printer from my list of printer as shown in the Youtube video and clicked on '+' to add a printer. Up jumps a printer Hello "Hewlett Packard," I added. I was able to print now 'Wireless' laptop #2 with the printer connected by USB cable to the Airport Express.

  4. I then plugged the USB cable in my computer and to the high jump the USB printer in my list of printers. I followed the Youtube video all over again, with basically all the previous settings. After running through the procedure, I've removed the USB printer (keeping the Airport Express printer), unplug the laptop Mac #2 USB cable and click on '+' to add a printer. A few seconds later, jumped up to a Hello LJP1102w printer, which I clicked on Add.

  -C' is to say that the printer unit now works in three different ways on this system (Mac laptop #2), all depending on how I put my default in the computer.

  -I think that the differences between my first failure and the subsequent success has been

  A. ensuring that I select the pilot of 'network' at the beginning, when you install the driver on the CD provided

  B. ensuring that I use encryption appropriate (which, for the Airport Express was WPA/WPA-2)

  C. unplug the laptop USB cable before searching for the printer Hello.

  D. I do not know if the OS X makes a difference. Laptop #1 is 10.5.8 (Leopard), while Portable #2 is 10.6.6 (snow leopard, as in the Youtube video).

  -So, as I say, I had a very easy installation and successful triple, following a frustrating initial attempt. On this first attempt, with #1 laptop, I could do two of the three works, but you have a wireless printer. And be fully wireless is really very cool...

  Maybe something in that will help the rest of you guys. Good luck.

• need instructions for changing the ITB on hp color laserjet cp1518ni

  need instructions for changing the ITB on hp color laserjet cp1518ni

  Hello the circus,

  Unfortunately the ITB - transfer belt doesn't seem to be a replaceable piece by customer. You will need to call our technical support at the 800-474-6836, and they can help you get this problem is resolved. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://goo.GL/kQDB

  HP out of warranty of the Support Options for HP printers selection:
  http://goo.GL/WJ1Vb

• Operating instructions for Hewlett Packard OJJ4500 washer version 10

  Where can I find Instructions for use of Hewlett Packard OJJ4500 washer version 10

  Hello

  Please, try the following steps and let me know what happens:

  1. Open Control Panel > Add / Remove programs.
  2. Locate Flash from Adobe / Macromedia Flash, select it and click on uninstall.
  3. Install the latest version of Flash by using Internet Explorer (a different browser can only install a plugin for the browser) here
  4. Insert the installation CD. Close the installation windows.
  5. Open my computer, right click on the driver CD, and then click Browse.
  6. Enter in the installation folder.
  7. Enter the folder of SolutionCenter.
  8. Right-click SolutionCenter.msi (can be identified by its other icon) and choose repair. Aprove that any error or prompt until Setup is complete dialog box.
  9. Restart the computer and try running the Solution Center once again.

  Kind regards

  Shlomi

• Lock the orientation of the display against instructions for user interface?

  Hello
  I am new to this forum and I want to say hello to everyone here.

  I have developed some simple games using Marmalade fast during the Marmalade for BlackBerry 10 Port-o-thon and obtained their release denied because of problems when switching of modes of orientation.

  Because of the beta status of 6.2 of Marmalade and jam quick, I would rather stay with on BB10 portrait and landscape on the Playbook.

  Can I lock orientation and get my apps aproved or is it against the instructions for user interface?

  Concerning

  It is absolutely perfect lock orientation for applications. Go ahead, orientation of the lock and submit. You shouldn't have any problems.