Instrument to appear in MAX, but not in the executable file

Similar Questions

• Why build application vi works in the development environment, but not in the executable file; error 1025

  Hello

  I have a request ('A') that I am trying to build another application ("BuildA").

  I can create a request for A manually of its project using the Build specification, and it works fine (A.exe).

  Also, when I run BuildA.vi in the development environment he calls the "Build.vi" properly and again generates application A.exe very well.

  Then, when I ask BuildA (manually) and run BuildA.exe, I would expect that it also creates A.exe as BuildA.vi did in the development environment.

  However, it fails with the error:

  Code: 1025

  Reference VI opened in .vi NI_App_Builder_API.lvlib:Build (path)-> BuildA.vi
  Path of the VI: C:\TEMP\AppBuild\BuildA\vi.lib\AppBuilder\BuildTarget.vi

  I noticed this thread , which looks like a similar problem, but has reached no conclusion.

  Why BuildA.vi works fine in the LabVIEW environment, but the application that builda.exe does not work?  All paths are hard-coded, so it shouldn't be a path problem.

  Thank you

  -john

  eye_in_the_sky wrote:

  I guess we will have to keep the application building separated the disappointment... automated scripts

  There are still other options.  Lets say configure you VI to run then.  If you ran the following command from your script line

  "C:\Program NIUninstaller Instruments\LabVIEW 2011\LabVIEW.exe" "C:\BuildA.vi".

  It would then open your BuildA.vi in LabVIEW and run in the development environment.

• On my iPad, can I move files from one folder to another, but not in the Preview file, why?

  When you manage files in iCloud, from an iPad, I can move to the files from one folder to another, but not in the Preview file. Secondly, when I check the file Preview to iCloud from Mac content is so different when you look at an iPad. Why is the gap between the iPad and the Mac?

  Try to go to iCloud.com to see if the elements are there and whether the device or the computer. That should indicate if the device or computer is not synchronizing. If the computer, try going to System Preferences/iCloud and stop synchronization. Wait a few minutes, then recheck the timing. If the device, go to settings/iCloud and do the foregoing.

• Can not run the executable file by LV7.1

  Hi all

  I'm surprised, I can't build and run the executable file LV7.1.

  I used to write a few vi with LV7.1 and built the executable according to these vi. It was no problem to build and run this executable file at that time. Now I can open these vi well with LV7.1, bu I can't run this executable file, it will be a mistake, please refer to the attachment. I'm trying to compile an executable file according to a simple vi, and then I can't run this exe file much more.

  Can you help me solve this problem? Thank you in advance.

  Evan

  @Christian: this is not correct.

  One of the reasons to do this is if LV 7.1.1 is installed, and then you install an application, including the runtime engine built in 7.1. It corrupts the execution engine.

  See here: http://digital.ni.com/public.nsf/allkb/680E61A4D02158A186256F7A0073C228

  Daniel

• files appear in Dreamweaver, but not in the local folder

  I have set up and set my site... I listed paintingfrance as my local folder where I would like my stored files. So when I opened Dreamweaver, I see all the files on the local folder... tab but when I go to my hard drive and look under the Files\paintingfrance program, the folder is empty. I can edit the files in Dreamweaver and download them - that everything works well, but it's a mystery why they are not in the local folder on my computer.

  You have probably two folders named paintingfrance on your computer.

  Do a search for files with the same name and when you have found the site folder, delete the empty folder in Program files.

  The Program folder files is where the programs install themselves, should not be used to store documents.

• When I export a PDF to JPEG, the margins are screwed to the top, but not in the PDF file. Why?

  I did a series of layouts landscape 8.5 x 11 in Illustrator, they all had the same instructions in the PDF file, aligning the different elements of text and vector itself. When I saved and print PDF files, they look good and printed as expected.

  However, when I go to file-> export... and save another version in JPEG format, they are all out either a little cut on the left margin or right margin. It is not consistent that confuses me, also because they look all uniforms in PDF format. Anyone know what I can do in the document or export the setting to prevent this from happening in Illustrator?

  When we realized that what was going on, we just open the PDF files in Acrobat Reader and saved in JPEG format, which takes more time, but is not screw up left or right margins. Any ideas what's happening? Thank you!

  You have to draw everything in alignment with pixels in Illustrator. Otherwise, a line may fall between 2 rows of pixels and you get this effect.

  But let's be honest, I think that JPG is not the best type of file to export from Illustrator. Why you do this?

  If you need to print, use HAVE or PDF/X-4, if you need it for the web or MS Office use PNG, if you need it on MS Office on Windows, use EMF.

  JPG has some kind of lossy compression that makes very visible spotty areas with drawings line Illustrator produces, so I would not recommend to export HAVE them in JPG format at all, unless you have a priority of photography and the work of art is not the object of your file.

• Alpha channel renders in preview, but not in the exported file.

  I have a pronounced After effects with Animation codec quicktime video that has an alpha channel.  Looks great play on the timeline in the first cc2014, but when exporting the layer alpha is made black.  I did exactly the same thing several times in previous versions of first without problem.  Is this a known issue with the first?  Is there another way to do that properly renders Media Encoder?

  It is a remake of an old video from SD card HD.  So, all this has been done before with success.  Why does cc_2014 not make it properly?

  Thank you.

  Problem solved.  I closed the first and Media Encoder and then reopened them and they made the alpha channel properly.

• Tween alpha works fine in preview, but not in the swf file

  I was wondering if anyone could offer some suggestions. I have a few words written in text mode static I made a graphic symbol. On the timeline, I used the motion tween and classic Tween to create change aplha from 0% to 100%.  I made sure that I have enoough to space on my calendar (10 images).

  Aplha interpolation works fine in preview, however when I export the swf file the aplha interpolation doesn't work anymore? I tried to break the text, flash of reboot, restart my computer and similar proposals for other items such as:

  I was able to fix this by checking the box 'use bitmap caching DURATION' in Blend in the properties panel for the MovieClip in question.

  I am currently using Flash CS5 on an imac. Would be grateful for any suggestions, that I do not understand how something that worked very well, has suddenly stopped working? Bug?

  Thanks in advance

  Stace

  Create a new fla and duplicate your efforts with your tween alpha of your text.  any problem?

• CD/DVR Player does not read the executable files on some CDs.

  It reads files on the CD, but not an executable file. I have two computers identicle, so I can check the CD on the other to see if it works. Some CD will start auto and others do not - and when I try to search the CD thanks to explore, there are only available data files & text. Example: new Canon printer installation software not start.with game automatic or manual, since there is no file to run. The same CD works on my other machine. I replaced the CD/DVR Player with a new and got the same results. Reinstall the driver didn't work, makes me think that something in Windows is enabled or disabled causing this problem, but I don't know what it could be. I have autoplay on, and it used to work fine until recently. Help! A final clue: he's going to play the CD in Safe Mode?

  Hello

  Check your antivirus/security program. The just maybe not clear enough as is
  always load chunks of itself into memory. So uninstall it and run its creator for removal tool
  avoid problems causing scraps left. Here are the recommendations to
  use during the test and even permanently.

  List of tools to clean/uninstall anti-malware programs
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 5.x and 4.8 x

  Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  ==========================================================

  Other methods would be to use the clean boot method to see if you can determine whether something
  interfere with the operation of the drive.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when
  your system boots and you connect. Autoruns also shows you the complete list of the registry
  and where applications can configure Auto-start for the files settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• My integrated Webcam is recognized by MAX but not as the IMAQ device

  Hello

  I use with 2014 LabVIEW IMAQ 14 and IMAQdx14.

  I am able to use my webcame MAX both in the Vision Assistant, but when I am trying to generate vi, in the wizard, IEEE1394 Imaging is grayed out.

  When I am using triggered image acquisition and select cam0 as the name of the interface (name of my camera to the MAX), I get the error code:-1074397163 (NOR-IMAQ: the session or the interface passed is not valid.)

  In MAX, I can see and use my camera, but it appears directly in the devices and Interfaces (and not under devices NOR-IMAQ)

  I can't find out if it is compatible live show... Is this to say that my camera is not supported by IMAQ? Is there a way to check whether LabVIEW?

  Thank you

  Karol

  Hi Karol,

  Since you are able to use the camera in MAX, it is DirectShow compatible. The reason why you get this error, it is that your device is not compatible with the IMAQ driver. Instead, you should be using the driver IMAQdx and corresponding IMAQdx live. Once you use those, you should be able to control in LabVIEW. It isn't an IEEE 1394 device either, so I think that it is expected that all options for this would be grayed out. Hopefully that should get you going in the right direction, but please post again if you have problems with the generation of VI you.

  Thank you

  Katie

• Strange black pixels appearing in photoshop, but not in the bridge, help?

  First Photo is displayed in Adobe Bridge (Print Screen Image)

  

  Second photo in Photoshop (Image of the screen print)

  

  Third Photo is saved as a JPEG in Photoshop (Image of the screen print) - don't notice any strange black pixel

  

  Sorry there no consistency in harvest but why I see these strange black pixels and why they disappear when recording in jpeg or same photo read in different visualization software? Help, please.

  Thanks in advance for your time and understanding.

  A bug in the graphics driver AMD/ATI. Catalyst 13.2 beta 5 update. See thread: black on some colors pixels

• Activity light appears very bright, but not all the time?

  pcsupport.about.com/od/termshm/g /. It's been awhile and it aggrevates me!

  Your question is too terse and contains too little information for anyone to
  help you.  Read this article and try again:

  http://support.Microsoft.com/kb/555375

• cRIO appears in MAX, but he can't see in LabVIEW, why?

  I had to hang a cRIO-9012.  I can see it in MAX, buy do not see it in LabVIEW.  LabVIEW is a PXi-8195 installed on the same network, but it doesn't seem to find the cRIO.  While setting up to MAX, I got the following warning; "... you enter the subnet mask is the target and the door of entry into two subnets. ».   The entry door is not specified, so I'm not clear on what that means.  I ping the cRIO from the command line, and it appears in MAX, is visible on the network.  LabVIEW just don't see it when I try to add to my project.  Any thoughts?

  I guess you look at something like that? http://forums.NI.com/NI/attachments/NI/280/1546/1/no%20cRIO%20Target.jpg

  This occurs when the NOR-RIO is not associated with your LabVIEW installation. What version of LabVIEW you run? NEITHER RIO 2.4.1 supports up to LabVIEW 8.5.1, if you use 8.6, you use NI RIO 3.0 or higher.

  If this is not the case, simply install NI RIO 3.0 will fix probably the problem.

  In regards to the subnet is the thing:

  The reason that a device on another subnet does not appear in the list of 'existing or peripheral targets' in LabVIEW is because it only goes to search for the same subnet, your computer is on. If it was looking for all possible IP addresses, should be... forever. It's one of the reasons for which subnets were created in the first place. If your cRIO and your computer are in different subnets, LabVIEW automatically find it. You can add it manually by selecting "Existing device on the remote subnet" and typing in the IP address. Or you can go back to MAX and place them on the same subnet.

• I created a my page book epub file, and it works perfectly in ibooks. But it does not appear on my other devices, and the .epub file cannot be successfully sent by e-mail. 5.6.2, iBook 1.5 pages

  I created a my page book epub file, and it works perfectly in iBooks. But it does not appear on my other devices, and the .epub file cannot be successfully sent by e-mail. 5.6.2, iBook 1.5 pages

  What's not?

  You must check the iBooks category in your OS X system preferences: Panel iCloud: iCloud Drive: Options: Documents Panel. On iOS, you must have enabled to iCloud and in the iCloud Drive location setting iBooks. Also, in iOS parameters: iTunes and App Store, ensure that iBooks is running.

  The iBook.epub file is a compressed/compressed and renamed folder that represents a single file to any email client. What do you mean, it cannot be sent correctly - and it's your experience, send, or the failure of the recipient to view the ePub document? What email client?

• Why does a file of type ._filename appear on television, but not on Mac

  Why do a. _filename.jpg file appears on television, but not on Mac?

  When I use a USB "thumb DRIVE" on my TV to show the photos as the slides a bunch of files with the prefix ".» _"appears, and should be deleted until I can show the real slides. Where it comes and can they be eliminated?

  How the drive is formatted

  Select it

  type CMD + i

  If it is FAT32, EXFat, or NTFS this is the reason why

  If so reformat with MacExtended - it * should * work ranging from Mac to Mac. I've never tried, but it would make sense that they kept mac compatible.