Why does a file of type ._filename appear on television, but not on Mac

Similar Questions

• How and why does a file name as 20160312103251.m2ts becomes 0003.mts?

  How and why does a file name as 20160312103251.m2ts becomes 0003.mts?

  How to make the .m2ts in a .mts?

  Hi HiView,

  .Mts and .m2ts file extensions is not a real difference as these two are associated with AVCHD files. The file extension can differ depending on how you import the files on your computer. Files that are imported by drag and drop, or transfer them without using PlayMemories House are registered as .mts files. While those who are copied using PlayMemories House are read as .m2ts files. You can change the file extension and also rename the whole file, clicking on the video, then select Properties. The file name and other data will appear to the right of the window. You can then rename or change the format of file through this tab.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• files appear in Dreamweaver, but not in the local folder

  I have set up and set my site... I listed paintingfrance as my local folder where I would like my stored files. So when I opened Dreamweaver, I see all the files on the local folder... tab but when I go to my hard drive and look under the Files\paintingfrance program, the folder is empty. I can edit the files in Dreamweaver and download them - that everything works well, but it's a mystery why they are not in the local folder on my computer.

  You have probably two folders named paintingfrance on your computer.

  Do a search for files with the same name and when you have found the site folder, delete the empty folder in Program files.

  The Program folder files is where the programs install themselves, should not be used to store documents.

• Why does my computer need a password to login? Was not necessary before.

  My monitor would not come after hitting the space bar. The PC was in mode 'sleep', so when I move the mouse or press a key on the monitor and the PC will wake. But not this time. I restarted my PC and a new (different, never seen before) opening page appeared. To the left was instruction click on my user name. To the right was a Director HP_. I clicked on that and open a password window. I've never set up a password, then I just hit enter. I was invited for a password again. Message 'Forgot your password?', retype your password.  I typed in admin, but that has not worked. I tried several passwords that I use for web access and the forums, etc. but I have not received the case at all. Several reboots, always the same new opening page and request a password. Before that, my PC would just open in my office, now I have this new blue sheet that need a password.

  Hi Trevor,

  Thanks for posting your query in Microsoft Community.

  The description of the problem, you are not able to connect to the computer. I'll be happy to help you in this case.

  I suggest you try the steps from the following link:

  How to connect to your Windows XP-based computer if you forget your password or if your password expires
  http://support.Microsoft.com/kb/321305

  How to turn on automatic logon in Windows XP
  http://support.Microsoft.com/kb/315231

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: http://support.microsoft.com/kb/322756

  I hope this helps! Let us know if you need help with Windows in the future. We will be happy to help.

• Why the html file that I downloaded from the internet will not open in Dreamweaver?

  I tested other pages to index and their linked pages and they opened in Dreamweaver.  I applied the same steps to this file, but it still not open.  All of this linked pages / index associated is open in Dreamweaver, but not the index page itself.  When I double click on the index.html file, it opens in the browser and the links work.  If the file is damaged in any way can it be repaired?  I checked the index.css file, but I see nothing wrong with it yet.  Can the html or css file contain code that prevents the files open in Dreamweaver, and yet still be opened in a browser?

  Of course, you have all the support files.

  Nancy O.

• Why can I play a WMV video that I created, but not import it into Windows Movie Maker?

  Why do I get the error message "the file * *.wmv cannot be imported because the codec required to play the file is not installed on your computer." If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file. "even if I CAN play the video in Windows Media Player?

  I have a Windows Media Video file I recorded using another program. I can open the video and watch it in Windows Media Player, but when I try to import into Windows Movie Maker (as I did with the other videos I recorded), I get a message saying that it cannot be imported "because the necessary codec to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file. "I tried to close Windows Movie Maker and reopening, she even tried to restart my computer, but it still does not work.

  Hello

  ·         What program did you use for recording to WMV file?

  ·         Are you having similar problem when you try to import the WMV file, which is not recorded by this program?

  Method 1:

  Although you can play a file in Microsoft Windows Media Player, you may not be able to import the file into Windows Movie Maker even though this article lists this kind of file. You will not be able to import the file if the codec that was used to encode the audio or video is not a codec that is supplied with Windows. In this case, you can re - encode the video or audio by using Windows Media Encoder, and then import the video or audio.

  To download the Windows Media Encoder, see the Microsoft Web site at the following address:

  http://www.Microsoft.com/download/en/details.aspx?ID=8509

  http://www.Microsoft.com/download/en/search.aspx?q=Windows%20Media%20Encoder

  See also:

  Importing files into Windows Movie Maker: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/importing-files-into-Windows-Movie-Maker-frequently-asked-questions

  Method 2:

   

  I suggest that you try to perform the SFC (System File Checker) scan on your computer and check if the problem still persists. To see how to the SFC Scan click on the link below and follow the steps in the Kb article.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• Why I can't play Rihanna anti on my iPhone (but on my Mac, it works...)

  I am able to stream Rihanna s ANTI on my Mac but NOT on my iPhone. Someone know why? May be linked because it is marked 'E '? And, if so, how do I solve this problem?

  The solution is: on iOS, go to settings > General > Restrictions and restorations of turn on.

  In the section "Content permit" choose "Explicit" for "Music, Podcast & News"

  Subsequently, you can restrict disable it again if you wish.

• Why does the runtime error-2147217398(8004100a) appear when starting windows xp?

  whenever I boot windows xp an error message runtime error - 2147217398 (80004100a).

  why it is happening?

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. What is the full and exact error message?

  Search for the issue in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.

  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.

  4. When prompted, click on restart to restart the computer.

• Why would I be able to access the files on a machine virtual of CMD but not file Explorer?

  I had a problem that goes back, I think that all the way to when I installed Workstation 10...

  I can access the shares on my Windows 8.1 host system via Windows networking from inside a computer virtual 8.1 Windows without problem.  And I can access actions in the virtual machine of my host via a CMD window, but I can't access the virtual machine to the host through the file Explorer:

  
  

  Why?

  -Christmas

  I have at the bottom of this problem and write the solution here for the benefit of third parties who may run across this thread.

  I have a tool called WebDrive that allows me to map network drives as FTP sites.  He had destroyed the normal to a registry value content when you add itself as a provider of network to explore.

  The key and the value that Windows Explorer needs to establish network connections are:

  Registry Info
  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\NetworkProvider\HwOrder] "ProviderOrder"="RDPNP, LanmanWorkstation, webclient.

  In my case the tool WebDrive, rather than add the WDNP32 entry to this list, replace entirely the list.  Restoration of the above re - enabled me to access the data in my virtual machines via the Explorer of files on the host computer.

  -Christmas

• Instrument to appear in MAX, but not in the executable file

  Hello

  I use two HP34401A make some measurements, and I transfer the program to a laptop with complete labview at your desktop with only the runtime engine.  Instruments made their appearance in the Office MAX, but when I run the executable, they cannot be detected.  I expect some suggestions on how to possibly resolve this problem.

  Thank you

  Not to mention that MAX, what other driver is installed and necessary? Did you install NI-VISA, NI GPIB? At a minimum, you should include NI-VISA in the installer that you built.

• I have files on disks flexible old 3.5 ". When I try to load "drive not formatted" message appears on some but not all. We did load but wouyldn can't later. Is there a solution >

  The disks are of various types, DS HD and HD. They contain copies of already published books which I would now like to publish on Kindle.  A disc is open with a useful book, but stupidly I didn't not immediately save it to my documents folder. Now it it gives just unformatted disk message.

  Hello

  Check if it works on another computer.

  Please try to copy the contents of the diskette on another computer and check if it works. You can copy the contents of the other computer later.

• Why does my system said service pack 1 is installed, but he always tells me to install an important update that? service pack1

  my system downloaded and installed service pack 1, yet auto update keeps popping up telling me to instal it?

  Hi Jerry,

  1. How have you installed service pack 1 before? Is it through Windows update?

  2. have you checked the Windows update history?

  Check if the Service pack is already isntalled on the computer. Follow the steps.
  1. Right click on "computer".
  2. In the system of the Details check if section Serivce pack is mentioned.

  If the Service pack is not installed, then you can download the stand-alone package for Service Pack 1 and install.

  See the article to download the stand alone Service Pack 1, and then run the installation.

  Windows Vista Service Pack 1 five language standalone (KB936330)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30

  You can verify if the service pack is installed in Windows update history.

  Reference:

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-in/Windows-Vista/see-which-Windows-updates-are-installed

  Hope this information helps. Response with status so that we can help you.

• Why does Avid DNxHD see the 2014 of the encoder, but is already in other applications?

  I have a Windows 7, 64-bit machine.

  DNxHD is already installed and is an option in first 2014 and even in the CC of encoder Adobe (not 2014)

  Option is not there in 2014 of the encoder. What gives?

  Please try running SOUL while holding down the SHIFT key. This should clear the cache of your plug-in. Let me know if that solves the problem for you.

• Why can my customer receive e-mails from my iPad but not my IMac?

  Hello, I have an iMac OS X Yosemite, Version 10.10.5, 3.5 GHz Intel Core i5, 16 GB 1600 MHz DDR3 and an iPad. Last year, I worked with a client, have no difficulty emailing back. I use Yahoo Mail. Recently, my customer migrated from Lotus notes to Outlook (version 2010) and cannot receive my email from my iMac. Only they can, however, make from my iPad. It's the explanation of their IT Department. "I have recently gone from Lotus to Outlook. When I was on Lotus our security does not come into conflict. When I migrated to Outlook the Outlook security is that collide with your security is why I do not receive emails sent through your computer. Safety on the iPad is different and is compatible with my computer which is why emails sent from your iPad come to me. "We tried to check SPAM, junk mail, basic troubleshooting. I'm not big on technique and I need to be able to send this email to the person of my computer. Help, please!

  Is the address of the customer e-mail different since he switched to Outlook? If so, have you changed his e-mail address in your Contacts? My guess is when you type an email to that customer and you start to overlay in his name in the of: domain, Mail automatically fills to its OLD yahoo.com email address.

  If you have two email addresses on your iMac for this customer - one for his old account from yahoo.com and one to his new Outlook account, delete the OLD e-mail address to your Contacts.

• Unable to scan to a Word document open... (not in a file) I have on my old HP but not on this one.

  Photosmart HP 6515

  using Windows XP

  1. cannot find a way to "reframe" a scanned sheet when I really want on a portion of the worksheet.  On my old HP, it was an option to lighten, Darken, crop, etc.  There are no options to set the scan I see on this one.

  2. unable to find a way to scan directly to an open Word Document.  The only options I see are in a file or email.  Most of my scanner is a file open (still unnamed).  My old HP Photosmart, there was a framework for the analysis of the Document.

  3. still unable to find a place to enter 'user-defined sizes.  I use several sizes of stationery not one of the displayed formats.  On my old HP if you want a size don't figure does not, you can configure a "custom size."

  On HP 6515 documentation, he said of 3.5 to 11 "sizes ("such as Custom"size) but it does not work.

  If someone can tell me what HP printer (for home) has the features (like my other 2 HP printers) I'll really appreciate it.  Some models say the custom calibration is available for Mac only.  I've never had a Mac... goal had w / these features of HP printers.  Can't imagine why the new models would have FEWER features.

  Someone has already tried to install and former pilot a 6510 and 6515.  I read a suggestion that install the old drivers, restores the 3 numbers above to what they were on an older model.

  Part of what happens is that the custom print size feature is no longer available on any printers that use the new firmware.  If you scan using the HP software, you should see options for the harvest and to adjust the lightness and darkness of the analysis.  If you use the HP software and can't find these options, let me know and I'll try to point you to them.  For a scan in an open Word document, you must save the analysis as an image and insert it manually in the document now.  The automatic function for this has been removed as well.  I'm sorry.

  After that I made this post, I was put to aware of this post from Travis_C that give you a work around for custom print sizes.  Hope that helps.