Insufficient privileges on 11.2.03 but not 11.2.0.1?

Similar Questions

• Error ORA-01031: insufficient privileges

  Hi all
  
  I am currently working on the logic of the standby database
  
  but I am facing a primary database problem
  
  "Select * from V$ ARCHIVE_DEST.
  
  LOG_ARCHIVE_DEST_1 valid
  LOG_ARCHIVE_DEST_2 ERROR ORA-01031: insufficient privileges
  
  to the current database, do not sync
  
  Help, please
  
  Vaibhav

  Vaibhav;

  Is the password file is missing from the backup site? Or is the different password between the primary/secondary database?

  If so I would correct by copying the file password from the primary to the waiting and changing the name to match your configuration.

  OR

  Try this command:

  Alter database guard standby;
  

  Best regards

  mseberg

• I tried to switch from Firefox 5 to 8 of Firefox, but a message box indicates that I have insufficient privileges to install. How can I continue?

  I received the alert to update Firefox, but during download and try to install, by moving the Firefox to the Applications icon, receive the message "insufficient privileges" box

  If he has problems with the update or the permissions then simpler is to download the full version and trash the version currently installed to do a clean install of the new version.

  Download a new copy of the Firefox program and save the file on the desktop disk image (dmg)

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Trash the present application Firefox to do a clean (re-) install
  • Install the new version you downloaded

  Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data if you uninstall and (re) install Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• I have administrator privileges, but when I run CHKDSK it says access denied due to insufficient privileges.

  I have administrator privileges, but when I run CHKDSK it says access denied due to insufficient privileges. You have to invoke this utility in elevated mode.

  How can I fix it?

  Hello

  1. what prompted to run chkdsk on your computer?

  To work with this problem, refer to these methods.

  Method 1:

  I suggest that you disable the antivirus software temporarily and try to run chkdsk on your computer.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Warning:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  You can check disk errors using the command-line of the system recovery options in Windows 7.

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  To open the System Recovery Options, see the section: to open the menu system on your computer Recovery Options
  

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Check if it helps.

• create view but insufficient privilege

  Hello
  I tried to create a view like below in 11.2.0.2
  
  create or replace view test as
  Select the dealer of dba_role_prives;
  
  but it keep saying 'insufficient privilege', I'd given s/n, create any view, under any view to the user.
  but still no luck.
  someone know what a privilege to another must grant the user?
  Thank you
  
  Vincent

  It works for me
  As sys

  grant select on dba_role_privs to scott
  

  As SCOTT

  create or replace view test as
  select grantee from dba_role_privs;
  

• ORA-20000: Schema does not exist or insufficient privileges

  Salvation of DBA
  
  I do the upgrade from 9.2.0.6 to 10g database
  I'm following ID. doc. 316889.1 - step 7
  I get the following error while taking backup existing statistics as follows:
  
  SQL > exec dbms_stats.export_schema_stats ('WMSYS', 'dictstattab', statown = > 'SYS');
  BEGIN dbms_stats.export_schema_stats ('WMSYS', 'dictstattab', statown = > 'SYS'); END;
  
  *
  ERROR on line 1:
  ORA-20000: WMSYS Schema does not exist or not sufficient to analyze privileges a
  object it contains
  ORA-06512: at "SYS." DBMS_STATS", line 4984
  ORA-06512: at "SYS." DBMS_STATS", line 5007
  ORA-06512: at "SYS." DBMS_STATS", line 5409
  ORA-06512: at line 1
  
  SQL > exec dbms_stats.export_schema_stats ('XDB', 'dictstattab', statown = > 'SYS');
  BEGIN dbms_stats.export_schema_stats ('XDB', 'dictstattab', statown = > 'SYS'); END;
  
  *
  ERROR on line 1:
  ORA-20000: XDB Schema does not exist or not sufficient to analyze privileges a
  object it contains
  ORA-06512: at "SYS." DBMS_STATS", line 4984
  ORA-06512: at "SYS." DBMS_STATS", line 5007
  ORA-06512: at "SYS." DBMS_STATS", line 5409
  ORA-06512: at line 1
  
  
  SQL > exec dbms_stats.export_schema_stats ('WKSYS', 'dictstattab', statown = > 'SYS');
  BEGIN dbms_stats.export_schema_stats ('WKSYS', 'dictstattab', statown = > 'SYS'); END;
  
  *
  ERROR on line 1:
  ORA-20000: WKSYS Schema does not exist or not sufficient to analyze privileges a
  object it contains
  ORA-06512: at "SYS." DBMS_STATS", line 4984
  ORA-06512: at "SYS." DBMS_STATS", line 5007
  ORA-06512: at "SYS." DBMS_STATS", line 5409
  ORA-06512: at line 1
  
  
  SQL > exec dbms_stats.export_schema_stats ('LBACSYS', 'dictstattab', statown = > 'SYS');
  BEGIN dbms_stats.export_schema_stats ('LBACSYS', 'dictstattab', statown = > 'SYS'); END;
  
  *
  ERROR on line 1:
  ORA-20000: LBACSYS Schema does not exist or not sufficient to analyze privileges
  an object it contains
  ORA-06512: at "SYS." DBMS_STATS", line 4984
  ORA-06512: at "SYS." DBMS_STATS", line 5007
  ORA-06512: at "SYS." DBMS_STATS", line 5409
  ORA-06512: at line 1
  
  
  SQL > exec dbms_stats.export_schema_stats ('DMSYS', 'dictstattab', statown = > 'SYS');
  BEGIN dbms_stats.export_schema_stats ('DMSYS', 'dictstattab', statown = > 'SYS'); END;
  
  *
  ERROR on line 1:
  ORA-20000: DMSYS Schema does not exist or not sufficient to analyze privileges a
  object it contains
  ORA-06512: at "SYS." DBMS_STATS", line 4984
  ORA-06512: at "SYS." DBMS_STATS", line 5007
  ORA-06512: at "SYS." DBMS_STATS", line 5409
  ORA-06512: at line 1
  
  
  SQL > exec dbms_stats.export_schema_stats ('SI_INFORMTN_SCHEMA', 'dictstattab', statown = > 'SYS');
  BEGIN dbms_stats.export_schema_stats ('SI_INFORMTN_SCHEMA', 'dictstattab', statown = > 'SYS'); END;
  
  *
  ERROR on line 1:
  ORA-20000: SI_INFORMTN_SCHEMA Schema does not exist or insufficient privileges
  to analyze an object it contains
  ORA-06512: at "SYS." DBMS_STATS", line 4984
  ORA-06512: at "SYS." DBMS_STATS", line 5007
  ORA-06512: at "SYS." DBMS_STATS", line 5409
  ORA-06512: at line 1
  
  Please guide me to solve the problem above.
  
  Thank you
  SG

  SG,

  You can ignore these errors.

  Note: 359483.1 - upgrade from 9.2.0.6 to 10.1.0.4.2 with Applications 11.5.10.2
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=359483.1

  Kind regards
  Hussein

• Tedious Error Message When you install Itunes "the installer has insufficient privileges to access this directory: C:\Program Files\Quick Time\QTSystem.»

  Hi, I tried to update my iTunes a day and when he made an error appeared. Now, today I uninstalled both iTunes & Quicktime, I don't remember what the first said (before finding out the programs were installed yet) but after I went back uninstalled them I tried to reinstall again (in the hope that it would work) and this message popped up.

  The installer has insufficient privileges to access this directory: C:\Program Files\Quick Time\QTSystem. The installation cannot continue. Log in as administrator or contact your system administrator.

  * I'm already logged as administrator.

  Could you please help me understand what the problem is? Thank you!

  Hello

  Try right click on setup.exe itunes then run as adminintrator

  If this does not work, try this

  Follow the information from apple to the link below

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  http://support.Apple.com/kb/HT1923

  and or ask for their support of itunes

  http://www.Apple.com/support/iTunes/

  Also try the discussions of apple itunes

  http://discussions.Apple.com/category.jspa?categoryID=149

• ORA-01031: insufficient privileges when granted access privileges to a new user

  Hello.

  When you are connected to a SYSTEM, I'm trying to create a new user and give him all the system privileges, but do so always the following error message appears:

  Cannot process the SQL command

  -

  Error at startup to the line: 123 to orders.

  SYSDBA GRANT TestUser

  Error report-

  SQL error: ORA-01031: insufficient privileges

  01031 00000 - "insufficient privileges".

  * Cause: An attempt was made to execute a database operation without

  the necessary privileges.

  * Action: Ask your database or the designated security administrator

  administrator to grant you the required privileges

  After clicking OK, the user is still being created, but it lacks many privileges to access.

  How can I solve this problem?

  I use Oracle SQL Developer version 4.1.2.20 and Oracle database 11g of the express edition.

  Connect as SYS, not SYSTEM to grant this priv

  Give him with extreme prejudice - it is powerful

  Note in the 12 c database we have stopped a lot of the administrative bits of the SYSDBA role in less powerful. This gives you more flexibility on who can do what in your database

  https://docs.Oracle.com/database/121/DBSEG/authorization.htm#DBSEG578

• Service_name problem-> ORA-01031: insufficient privileges error!

  I installed the database Oracle 11.2.0.1 on Oracle Linux 6.6, Virtualbox to test replication of the database.

  I have oracle11g and grid of two users. User network is set to infrastructure grid on ASM.

  When I prepare the database for duplication, I created a service_name as neworcl. When I connect to new oracle_sid with service name neworcl the following error has occurred!

  [oracle11g@orcl11g dbs] $ sqlplus sys/222333@neworcl as sysdba

  SQL * more: Production release 11.2.0.1.0 on Sun Oct 13 15:00:35 2015

  Copyright (c) 1982, 2009, Oracle.  All rights reserved.

  ERROR:

  ORA-01031: insufficient privileges

  BUT WHEN I want TO CONNECT locally without service_name then it is OK as follows

  Enter the user name: sys as sysdba

  Enter the password:

  Connected to:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  SQL > select instance_name, status from v$ instance;

  STATUS INSTANCE_NAME

  ---------------- ------------

  neworcl START

  My tnsnames.ora file located in oracle11g user home as below

  tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora

  # Generated by Oracle configuration tools.

  = ORA11G

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = orcl11g) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = ora11g)

  )

  )

  NEWORCL =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = orcl11g) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = neworcl)

  )

  )

  Listener.ora file located user to network as below

  listener.ora # Network Configuration file: /u01/app/grid/product/11.2.0/grid/network/admin/listener.ora

  # Generated by Oracle configuration tools.

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (GLOBAL_DBNAME = ora11g)

  (ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)

  (SID_NAME = ora11g)

  )

  (SID_DESC =

  (GLOBAL_DBNAME = neworcl)

  (ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)

  (SID_NAME = neworcl)

  )

  )

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  (ADDRESS = (PROTOCOL = TCP)(HOST = orcl11g) (PORT = 1521))

  )

  )

  ADR_BASE_LISTENER = / u01/app/grid

  ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER = WE

  QUESTION: Why I can't connect to the new database with service_name = neworcl?

  Net Oracle connections as sysdba usually require a password file. Have you created a password file for your database?

  You can check the content of $ORACLE_HOME/dbs and see if you have a file named "orapwneworcl". If you do not, you can create it using the orapwd utility. Change your password for SYS in sqlplus must automatically synchronize the password in the password file. The password file is necessary for remote connections, since you cannot authenticate using the OSDBA group and the database may in fact not even begin to verify your password.

  For more details, see https://docs.oracle.com/cd/B28359_01/server.111/b28310/dba007.htm

  BTW, when you connect AS SYSDBA using Protocol inheritance, you can use any user name and password and will always connect to the SYS schema, which case authentication is made by the OSDBA group identifier. For example, you can use any user name and password, such as "humptydumpy/blablaba sqlplus as sysdba".

• insufficient privileges when you create sequence using the procedure

  CREATE OR REPLACE PROCEDURE schema1.proc1 AS
  BEGIN
  EXECUTE IMMEDIATE 'DROP SEQUENCE schema1.add_ins_seq';
  EXECUTE IMMEDIATE 'CREATE SEQUENCE schema1.add_ins_seq MINVALUE 1 MAXVALUE 999999999999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 1000 NOORDER  NOCYCLE';
  END;
  

  This procedure is created to schema1 by schema1.

  Schema1 boasts a CREATE SEQUENCE privilege.

  When I run this procedure through SQL Developer after the Cup to schema1, the error is thrown in insufficient privilege to CREATE SEQUENCE, however, DROP SEQUENCE is executed. I can create the sequence without the procedure call.

  If I add AUTHID CURRENT_USER so I don't get the error of insufficient privileges.

  Why it gives this error when the owner and the applicant of the procedure is schema1?

  Hello

  1st thing to know: when a procedure is defined (and updated), any privileges granted through ROLE is not taken into account. This is because these privileges can be active or not at the level of the session (as happens if for example a user has active 'role A' in session 1 but not in session 2 and if this role has been used to define a procedure?) The proecedure must at the same time be VALID in session 1 and INVALID session 2? Is not possible.

  Thus, for instance in a situation of 'standard': user SYSTEM has 'DBA Rôle', so you can for example make a sqlplus session "SELECT * v $ instance;", but you would write a procedure owned by system making instance_name SELECT INTO l_variable OF v$ instance;  "then"surprise": the procedure cannot be compiled because of the ORA-904 Table or view does not exist..." To be able to create the procedure, a DSS system needs to be done.

  2nd thing for your special case, a little more complex: default for a procedure is 'AUTHID DEFINE', but once more: it means "privileges of the author creating the procedure", so without taking into account the acquired privileges through roles... Your user name is 'sequence create' through a role, it cannot use the privilege within the procedure.  But... but when you define the procedure with AUTHID CURRENT_USER, privileges are evaluated at run time, and thanks to the active ROLE in the session by calling the procedure, at this time, the user can create the sequence.  If try again you but with 'The VALUE NONE ROLE' in the session before the call, you will again have the question.

  Conclusion: If you need to do the action, you must grant the user the necessary privilege directly.

  Best regards

  Bruno Vroman.

• ORA-01031: insufficient privileges - HOW SOLVE? Help, please...

  Hello

  Everything was running as a result with the exception of a question with ENTERPRISE MANAGER I posted on the discussion. So following the favorable response of the discussion, what I did is I tried to change the listening port, and then I got this error message ORA-01031: insufficient privileges .  Then after I uninstalled the database again and tried to remove all the listener again and tried to add the listener again, but has no wok. I have the grid installed in my pc. I already uninstalled dbca database so I wonder how I could resolve the question above? I have oracle grid in my pc and here is some information that you might need.

  [grid@example admin] $ echo $ORACLE_SID

  + ASM

  [grid@example admin] $ echo $ORACLE_HOME

  /U01/app/11.2.0/grid

  [grid@example admin] $ su - oracle

  Password:

  [oracle@example ~] $ echo $ORACLE_SID

  ORCL

  [oracle@example ~] $ echo $ORACLE_HOME

  /U01/app/Oracle/product/11.2.0/Db_1

  [oracle@example ~] $ echo $ORACLE_UNQNAME

  ORCL

  [oracle@example ~] $

  [grid@example admin] $ vi sqlnet.ora

  #NAMES. DIRECTORY_PATH = (TNSNAMES, HOSTNAME, EZCONNECT)

  SQLNET. AUTHENTICATION_SERVICES = (ALL)

  NAMES. DIRECTORY_PATH = (TNSNAMES, HOSTNAME, EZCONNECT)

  ADR_BASE = / u01/app/grid

  Thanks Hemant K Chitale. According to your suggestion, I went through CRSCTL view of ALL... http://docs.oracle.com/cd/E11882_01/rac.112/e16794/crsref.htm#CWADD92153 ... AND it solved my problem thank you very much
  

  
  

  CRSCTL overview

  CRSCTL is an interface between you and Oracle Clusterware, analysis and requesting objects Oracle Clusterware Oracle Clusterware APIs.

  Oracle Clusterware 11 g release 2 (11.2) introduced controls compatible with the cluster with which you can perform the check, start and stop operations on the cluster. You can run these commands from any node in the cluster to another node in the cluster, or on all nodes of the cluster, depending on the operation.

  You can use the CRSCTL commands to perform several operations on Oracle Clusterware, such as:

  • Start and stop Oracle Clusterware resources
  • Activation and deactivation of the Oracle Clusterware demons
  • Check the status of the cluster
  • Management of the resources that are third-party applications
  • Integration of Intelligent Platform Management Interface (IPMI) with Oracle Clusterware of failure isolation support and ensure the integrity of clusters
  • Debug Oracle Clusterware components

  
  

  [grid@example bin] $ crsctl start resources-all

  CRS-2501: resource "ora.ons" is disabled

  CRS-2672: attempt to start 'ora.evmd' on 'example '.

  CRS-2672: attempt to start 'ora.cssd' on 'example '.

  CRS-2672: attempt to start 'ora.diskmon' on 'example '.

  CRS-2676: beginning of "ora.diskmon", the successful "example"

  CRS-2676: beginning of "ora.evmd", the successful "example"

  CRS-2676: beginning of "ora.cssd", the successful "example"

  CRS-2672: attempt to start 'ora.asm' on 'example '.

  CRS-2676: beginning of "ora.asm", the successful "example"

  CRS-2672: attempt to start ' ora. DATA.dg' on 'example '.

  CRS-2672: attempt to start ' ora. FRA.dg' on 'example '.

  CRS-2676: beginning with ' ora. DATA.dg' on successful "example"

  CRS-2676: beginning with ' ora. FRA.dg' on successful "example"

  CRS-2672: attempt to start 'ora.orcl.db' on 'example '.

  CRS-5017: the action "ora.orcl.db start" resource has met the following error:

  ORA-01078: failure in the treatment of system settings

  ORA-01565: error in the identification of file "+ DATA/orcl/spfileorcl.ora".

  ORA-17503: ksfdopn:2 could not open the file +DATA/orcl/spfileorcl.ora

  ORA-27140: attach to post/wait installation failed

  ORA-27300: OS dependent operating system: invalid_egid failed with status: 1

  ORA-27301: OS Error Message: operation not permitted

  ORA-27302: an error occurred at: skgpwinit6

  ORA-27303: additional information: current startup egid = 504 (oinstall), egid = 501 (asmadmin)

  . For details, refer to "(:CLSN00107:))" "in ' / u01/app/11.2.0/grid/log/example/agent/ohasd/oraagent_grid/oraagent_grid.log '.

  CRS-2674: beginning of 'ora.orcl.db', 'example' failed

  CRS-2679: attempt to clean the 'ora.orcl.db' on 'example '.

  CRS-2681: clean "ora.orcl.db" on successful "example"

  CRS-4000: Start command has failed, or completed with errors.

  [grid@example bin] $

  ASM IS WATCH NOW TO THE LISTENING PORT

  [grid@example bin] $ lsnrctl status

  LSNRCTL for Linux: Version 11.2.0.3.0 - Production on July 15, 2015 09:03:11

  Copyright (c) 1991, 2011, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=example.castrading.com) (PORT = 1521)))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  Version TNSLSNR for Linux: Version 11.2.0.3.0 - Production

  Start date July 15, 2015 07:30:34

  Uptime 0 days 1 h 32 min 36 sec

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Parameter Listener of the /u01/app/11.2.0/grid/network/admin/listener.ora file

  The listener log file /U01/app/grid/diag/tnslsnr/example/listener/alert/log.XML

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=example.castrading.com) (PORT = 1521)))

  Summary of services...

  Service '+ ASM' a 1 instance (s).

  Instance '+ ASM' READY State, has 1 operation for this service...

  Service "orcl" has 1 instance (s).

  Instance "orcl", status UNKNOWN, has 1 operation for this service...

  The command completed successfully

  [grid@example bin] $

• Download "error: ORA-01031: insufficient privileges" when try to add relief of database

  Hi all

  I get insufficient privileges error when I added a standby database to dg configuration. I read some blog and he said that dgmgrl does not support os authentication, which means that I need to connect with sys and password. But I found that if I keep standby and primary SIDs are the same, the error will not occur even if I don't provide a password. Anyone know the reason? And no workaround?

  The process as follows:

  main SID: orcl ensures sid: prxx

  connect to "dgmgrl / '.

  Run ' add the database ' prxx_stby "as an identifier of connection is"prxx_stby"

  Download:

  Error: ORA-01031: insufficient privileges
  
  Failed.

  But if sid main: orcl ensures sid: orcl

  connect to "dgmgrl / '.

  Run ' add the database ' orcl_stby "as an identifier of connection is"orcl_stby"

  Download:

  Database "orcl_stby" added

  Liz

  I think still you can connect as "dgmgrl /", but its recommended to use "dgmgrl sys / * '.

  As rchem has said, there can be question of password. It doesn't matter whether the SID is the same or not primary and standby so different locations. So the best practice is to connect to the database from the primary server before using Oracle net service and test whether you connect or not.

  Ex: Prim_host > sqlplus sys/***@stby as sysdba

  There are a lot of possible issues

  -Missing or invalid password file

  -Service name is not registered with earphone

  -service incorrect, mentioned in the tns names

  and so many things, overlaps with these things.

• ORA-01031: insufficient privileges in ORACLE 8.0.5

  
  

  Hi all

  
  

  Can you help me please:

  
  

  IM using ORACLE 8.0.5

  
  

  
  

  I made this package:

  ORACLE 8.0.5
  CREATE OR REPLACE PACKAGE BODY MULTIFOX. PAQ_MULTIFOX AS PROCEDURE REVISA_CRED IS BEGIN UPDATE / * + BYPASS_UJVC * /. ( SELECT IF NECESSARY. CDGNS, PRN. CICLO, PRN. CANTAUTOR, MPD. NF OF MULTIFOX. MPD MPD, SIACOM. NRP NRP WHERE MPD. CDGNS = PRN. CDGNS AND MPD. CICLO = PRN. CICLO AND THE LBD. CANTAUTOR > 0 ) NF SET = null; COMMIT; END; END PAQ_MULTIFOX; /
  CREATE OR REPLACE PACKAGE MULTIFOX. PAQ_MULTIFOX AS

  
  

  PROCEDURE REVISA_CRED;

  END PAQ_MULTIFOX;

  When I call this procedure of Toad SQLEditor I get this error

  

  If I run the script directly in TOAD sqleditor, it works great!

  

  I have connected to the schema SIACOM one gave all permisions them user MULTIFOX,.

  
  

  GRANT CONNECT TO MULTIFOX;

  GRANT DBA TO MULTIFOX;

  MULTIFOX GRANT RESOURCE;

  GRANT SELECT ANY TABLE TO MULTIFOX;

  GRANT EXECUTE ANY PROCEDURE TO MULTIFOX;

  GRANT SELECT, INSERT ON SIACOM. PD FOR MULTIFOX;

  GRANT SELECT, INSERT ON SIACOM. PDI TO MULTIFOX;

  but don't solve it, get the same error (ORA-01031: insufficient privileges)

  When I add the AUTHID CURRENT_USER clause to the definition of the package, had this error in compiling...

  

  What Miss me?

  Thanks in advance. !

  
  

  
  

  But isn't your request doing an UPDATE? A right to select is not help with that.

  The best way to solve the problems related to the privilege is to remove all of THE objects except for one a simple query and see if it works. If she adds another object of return and test this.

  You will find the problem object when it fails.

• Re: "insufficient privileges" error when you run the Java stored procedure in another schema

  I get an "insufficient privileges" error when you run the Java stored procedure in another schema, see details below.  I don't know what are missing privileges (I already granted the EXECUTE privilege), suggestions?  -Thank you.

  Define a simple java class and deploy it as a Java stored procedure to test:

  
  

  Schema: User1

  test of the package;

  public class HelloWorld {}

  public HelloWorld() {

  Super();

  }

  public static String Hello () {}

  Return "HELLO";

  }

  }

  CREATE or REPLACE FUNCTION HELLO RETURN VARCHAR2 AUTHID CURRENT_USER AS LANGUAGE JAVA NAME ' test. HelloWorld.hello () return java.lang.String';

  Grant execute on USER2 HELLO

  Test the Java stored procedure through the PL/SQL function call (in the same schema):

  
  

  Schema: User1

  SET SERVEROUTPUT ON

  DECLARE

  v_Return VARCHAR2 (200);

  BEGIN

  v_Return: = User1. HELLO;

  DBMS_OUTPUT. Put_line ('v_Return =' | v_Return);

  END;

  anonymous block filled

  v_Return = HELLO

  Test the Java stored procedure through the PL/SQL function call in a different pattern:

  
  

  Schema: USER2

  SET SERVEROUTPUT ON

  DECLARE

  v_Return VARCHAR2 (200);

  BEGIN

  v_Return: = User1. HELLO;

  DBMS_OUTPUT. Put_line ('v_Return =' | v_Return);

  END;

  Error report-

  ORA-01031: insufficient privileges

  ORA-06512: at "User1." HELLO', line 1

  ORA-06512: at line 4 level

  01031 00000 - "insufficient privileges".

  * Cause: An attempt was made to change the user name or password

  without the privilege appropriate. This error also occurs if

  trying to install a database without the need for employment

  access privileges.

  When Trusted Oracle is configure in DBMS MAC, this error may occur

  If the user has been granted the privilege necessary for a higher label

  that the connection is active.

  * Action: Ask the database to perform the operation or grant administrator

  the required privileges.

  For users Trusted Oracle get this error, well that granted the

  the privilege that is suitable for the top label, ask the database

  administrator to grant the privilege to the appropriate label.

  You have created the function with AUTHID CURRENT_USER, which means that the function is executed with the rights of the applicant (but not with the rights of the author). This means that the applicant must have grants (directly or through roles) on all used/accessible objects in the service. In your case the user USER2 has not granted with EXECUTE on the class/source Java test. Class HelloWorld, causing the ORA-01031 exception. You create service without AUTHID CURRENT_USER (i.e. with AUTHID DEFINE, which is by default, if you do not have a specific reason to use AUTHID CURRENT_USER) or grant EXECUTE on JAVA test SOURCE. Class HelloWorld to User2.

  Dimitar

• MAXL drop database fails - ERROR - 1051041 - insufficient privilege for this operation - with Application Manager

  Hello

  SSP database security.

  User and group are both part of the native repertoire, but also exists in the active directory configuration.

  I create a group.

  I set up the Group Application Manager for Application X

  I make A user a member of the Group

  User A runs a MAXL script; -

  Drop database X.Y;

  The drop falls down-

  For this operation, the insufficient privilege ERROR - 1051041 -.

  Essbase 11.1.2.2.

  Is this a bug?

  Is there a solution?

  Thank you

  Robert.

  Robert, read Cameron link I see this:

  "An Application Manager can remove only the applications and databases that he created."

  Leaving aside the question of whether this applies also to female users, this is probably your problem, is it not?