Integer to string conversion

Hello

Is there a way to convert an entire parameter to a string and save it in a string parameter, IPCC Express 3.5?

Kind regards

Christos

You can accomplish this by running the Java method, use Execute Java method step, I remember exactly what method to use, but there should be a pre-defined.

Chris

Tags: Cisco Support

Similar Questions

  • Number to String Conversion

    So the question is, which is rounded up my numbers?  Or, more generally, what have I done wrong here?

    The main program this sub.vi works for the needs these numbers as strings, and I think I picked the wrong number to string conversion .vi or missed a configuration somewhere, because the program takes perfectly good number like - 0.340316 and rounded to-0 (zero negative? it's zero, negative).

    The zero negativity hand, the number of decimal string .vi is rounded up my whole numbers.

    The function is supposed to be converted in its entirety. Just go to help > show contextual help and read the description. The desired function is called fractional number of string.

  • Convert integer to string and show two numbers

    Hello

    How can I convert an integer to a string?

    StationGlobals.MyInteger is 1.

    With the help of Str (StationGlobals.MyInteger) must convert to "01" instead of only 1.

    How is that possible?

    THX

    Thanks for the screenshot.

    I took the format string "%.2i" in my function str() and now have numbers here too 2.

  • On the digital unit of string conversion

    Hello world

    I'm trying to convert a digital control with min as a unit to a string.

    The fact is that it converts in seconds before it updates the channel indicator.

    I noticed that the format "in channel" will convert always first to the base unit (unit multiple value of units conversion value), as W kW (10 kW will display 10000 W) to watt unit.

    Is there a way to format the entry without this conversion value to the first base unit?

    Thank you...

    If you are looking for the syntax of using LabVIEW Format specifier, you'll see a unit option.

    This is the format that you want to keep the string in a few minutes: g {min} %

  • Number in hexadecimal string conversion problem

    Hello

    for a serial communication, I need to send byte-code in an ascii hexadecimal string. When I use the constants and send them by VISA to the COM port it works fine, but if I use converters numbers it doesn't. Can someone show me what I'm doing wrong?

    deepearth

    --------------------------------

    Windows XP SP3, LV 8.5.1

    Since your string indicator is set to hexadecimal display, it seems you want to a hexadecimal string, a single byte/number.

    (You are currently using a hexadecimally format string, composed exclusively of ASCII of the 2 characters/byte "0.F" characters.) This is not what you want!).

    Here is another solution using type conversion:

  • Ascii to binary string string conversion

    Hello

    I am fairly new to LABVIEW but now I connect to a device using a serial RS232 cable.  In any case I use VISA read to get the output of the unit, and I wanted the device to return the output to ASCII format.  He is able to do, but now I'm stuck.  Now, I'm trying to convert this string of ASCII characters to a binary string.  In other words, if my release was a "Medley" of VISA Read, I have to be able to get a string that was '0111000101101110 '.  Any help is appreciated.  Thank you.

    This does not make much sense, because "0111000101101110" would be "SB" and not "QN". You want to throw a conversion 'lowercase' too?

    In any case, here's a solution that works with any length of string.

    This seems quite complicated. In general, it is easier to work directly in binary strings rather than binary to ASCII format.

  • * Exception text _ * __System.InvalidCastException: string Conversion 'You have an error in your SQL sy' to type 'Double' is not valid. -> System.FormatException: input string is not in the correct format.

    at Microsoft.VisualBasic.CompilerServices.Conversions.ParseDouble (String Value, NumberFormatInfo NumberFormat)
    at Microsoft.VisualBasic.CompilerServices.Conversions.ToDouble (String Value, NumberFormatInfo NumberFormat)
    -End of the exception stack trace internal-
    at Microsoft.VisualBasic.CompilerServices.Conversions.ToDouble (String Value, NumberFormatInfo NumberFormat)
    at Microsoft.VisualBasic.CompilerServices.Conversions.ToDouble (String Value)
    at CPAX20.utilities.Dec (String strCode)
    at CPAX20. Form1.tmrOffer_Tick (Object sender, EventArgs e)
    to System.Windows.Forms.Timer.OnTick (ByVal e As EventArgs)
    at System.Windows.Forms.Timer.TimerNativeWindow.WndProc (Message & m)
    at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

    Hi AnnBrod:

    Good news!
    I beat CPAX20.
    I found a solution and until now it works fine.

    Step 1.
    Perform the procedure on this site:

    http://support.Microsoft.com/default.aspx/KB/929135

    When you perform the sequence of boot, before defining the configuration of the computer to normal,
    go to this location on your computer:

    C:\Program Files\Fichiers Files\alg.exe
    (File is CPAX20.exe)
    It's your culprit.

    The boot he has stopped working; While it is not running, it may be deleted.
    Everyone please get rid of this pest as soon as you get this.

    Have a great day and be careful on the net; I still don't know how we are infected by it.

    See you soon,.
    Michelangelo
    (ITstudent)

  • a stupid question about the string conversion error

    I learn generic

    well generic allows setting the data type that you add to the fields of the object, right?

    I made a simple example

    class generic < String >

    {

    The name of the string;

    void set (String name)

    {myIdName = name ;}

    String get() {return myIdName ;}

    }

    class using {}

    Public Shared Sub main (String [] args)

    {

    generic < String > gn = new

    (generics) < String >;

    GN. Set (90);

    System.out.println ("name entered is:" + gn.get ());

    }

    }

    now the line

    GN. Set (90);

    I know that I send a string to the value method, but I wanted to see the error that comes when I send the argument of type other than a string and sent 90 to set method (without quotes)

    the error that slammed me is

    method defined in the class generic < String > cannot be applied to the given types

    required: java.lang.String

    found: int

    reason: int real argument cannot be converted to a java.lang.String by method invocation conversion

    corresponding to a variable of type String: String extends the object declared in the class generic

    OK here is my stupid question

    I know that int cannot be converted to a string and put 90 quotes will correct the error

    What intrigued me is the last line

    "Chain extends object declared in the class generic.


    I know that everything is under the object class

    that means that means line... ??

    thnq

    What intrigued me is the last line

    "Chain extends object declared in the class generic.


    I know that everything is under the object class

    that means that means line... ??

    Which refers to the class definition you provided:

    generic class

    You "stated" in your 'generic' class a 'collar' stretching ' the object '. It reads as if it said "String declared in the class generic.

    See "Generic Types" in the Java Tutotial

    http://docs.Oracle.com/javase/tutorial/Java/generics/types.html

    Search for the word 'object' and you'll see that word highlighted in the world. Although it appears highlighted read this line:

    As you can see, all instances of the object are replaced by T. A variable of type can be any non-primitive type you specify: any type of class, any interface, any type of table or even another variable of type.

    On this page, you will see this:

    A generic class is defined with the following format:

    class name { /* ... */ }
    

    Where each one is read as: T1 extends object ', "T2 extends object", etc.

    When you said this:

    generic class

    You replaced "T1 extends object" with "String extends object".

  • Create object of type integer error String

    Hi all

    I use JDev 12.1.2.0.0

    I created a selectManyChoice based on a data control that I did a view with a single column (which is a string).

    I set the properties of the component to be immediate = true and autosubmit = true and I have a method that I have already tried with other components like that and I know it works, but the method runs. It gives the following error:

    < 21 February 2014 10:04:41 AM GMT > < error > < oracle.adfinternal.controller.application.AdfcExceptionHandler > < ADFC-50016 > < ADFc: when Manager application exception exception handling threw a new exception.

    oracle.jbo.domain.DataCreationException: Houston-25009: failed to create an object of type: java.lang.Integer type: java.lang.String with value: General BI seller

    ....

    Caused by: java.lang.NumberFormatException: for input string: "General BI vendor.

    at java.lang.NumberFormatException.forInputString(NumberFormatException.java:65)

    at java.lang.Integer.parseInt(Integer.java:492)

    at java.lang.Integer.valueOf(Integer.java:582)

    .....

    I think that his is a normal behavior of the component, it tries to convert the full text but I've not specified for this component and I have other elements (selectManyChoices) that return string values where this doesn't happen.

    How can I fix?

    Here is the code for my component:

    < af:selectManyChoice value = "#{bindings." TypeSellerList1.inputValue}.

    label = "#{bindings." TypeSellerList1.label}"id ="smc3.

    autoSubmit = 'true' immediate = "true".

    valueChangeListener = "#{OBIEE_managed_bean.» TypeSellerListSelection} ">"

    < f: selectItems value = "#{bindings." TypeSellerList1.items}"id ="si6"/ >

    < f: validator binding = "#{bindings." TypeSellerList1.validator} "/ >"

    < / af:selectManyChoice >

    Any idea on how to solve this problem?

    Respect and thanks for the help,

    Frederico.

    I'm very well thank you Frederico. Hope you are fine as well.

    I just saw that you have a validators on your component. Try commenting on this line and test again.

    Thank you for your congratulations

    Antonis

  • Beginner? : entire string conversion

    Hello!  I have some difficulty to convert a string to an integer.  Here is my code:

    var str:String = e.currentTarget.name as String; / / getting values like "song1", "song2"

    str = str.replace ("song", ""); It passes the "song1" or "song2' to '1' or '2'

    var num:int = str as int; / / MUST convert the '1' to '2' to 2 and 1

    trace ("number:" + num + ", str:" + str);

    The trace is still out:

    NUM:0, str:1

    NUM:0, str:2

    etc...

    The str value is there, but when he gets put in num then it zero.  What I am doing wrong?

    Thanks in advance!

    Try to use: var num:int = int (str);

  • Channel of String conversion to the data channel

    I have a problem I tried to accomplish through a. The URI of the file but can seem to make it work good for me.  I have an original data channel are in TEXT format and the data in the channel are the phone number in the format 6667779999 or 4343. Can someone help me with a suggestion of script to convert this. Most of my ATTEMPTS end with a 66.67779e5.  Can be simple but I can just figure it out.

    Thank you J

    Hello J,

    A number such as 66.6778888e5 can be shown as 6667778888 in a DISPLAY box or table or text REPORT or a axis of REPORT graph by using the display correct format string - in this case "d".  Where do you 6667778888 number appears like this in DIAdem, exactly?  If you want to see in a BULLETIN Board, you will need to choose the option button 'Selected channels' first in the configuration dialog box, and only then will you be able to choose a format string to display such as "d" for this column.

    Brad Turpin

    Tiara Product Support Engineer

    National Instruments

  • String conversion number

    Hi all

    I need to convert the string like "-73.28" to the number - 73.28. With decimal string to number Vi I get only - 73,00 output with "-73.28" Dim input As string. What I've done wrong? How to get the required results? Also, note that it must be. the number of output!

    Thank you!

    Hi Nina,

    Firstly: have the decimal separator ',' in a digital indicator is just for aesthetic purposes, you can always calculate using the value...

    (1) you can change the settings of the operating system (Win: settings regional aka regional Einstellungen). I do this for all my computers as it seems "natural" for me when working with scientists/measurement data

    (2) you can move LV to ignore the decimal separator system settings - you will find in the dialog box options...

    But when using properly formatted output functions you do not need to change any setting...

  • string conversion appropriate type based on the content of string

    Hello

    I have a CSV with string values, and I want to assign them to good type in labview, then assing them to some pre-existing teststand properties.

    I think a particular way in a digital chain of detection should be in labview somewhere, but I can't seem to find it.  There is certainly decimal string number and string of fractional number, but an error during their passage of a string like "blah".  They just return 0.

    So my main challenge here is to feel a digital channel, either with a single point decimal or not and the impression that it is a 'number '.

    Example:

    Takes the string->

    1.234-> is the number

    1234-> is the number

    192.168.1.12-> is not a number

    I could write a vi to do this, but I was wondering if it wasn't already obvious tool in labview, which is escaping at that time.  I don't like to reinvent the wheel, even for something so simple.

    Thank you

    David J.

    david_jenkinson wrote:

    So my main challenge here is to feel a digital channel, either with a single point decimal or not and the impression that it is a 'number '.

    Example:

    Takes the string->

    1.234-> is the number

    1234-> is the number

    192.168.1.12-> is not a number

    In the more general case, you must also be able to properly analyze, for example - 10e6, 85.83E - 3 and such good number to floating point. Also your last example is basically a number U32, just formatted in the style of IP address.

    You must use 'analysis of the string' %f format and NaN as a default value. Then also check if the string is an empty string. If this isn't the case, then it is not a number according to your narrow definition.

  • Points table for the string conversion of floating

    Is it possible to convert an array of floating point and keep the decimals, while in the version of the loop below, without no loop?

    How about using "String in array to worksheet" and the "worksheet of array of strings" back to back.

  • String conversion that a certain past number

    Why do I only get a past number?

    STRING [XXXXX. XXXXXXXX] => FLOAT [XXXXX. X]

    float extended by default did not help

    your digital indicator is configured to display the 6 digits of precision

Maybe you are looking for