On the digital unit of string conversion

Similar Questions

• Number to String Conversion

  So the question is, which is rounded up my numbers?  Or, more generally, what have I done wrong here?

  The main program this sub.vi works for the needs these numbers as strings, and I think I picked the wrong number to string conversion .vi or missed a configuration somewhere, because the program takes perfectly good number like - 0.340316 and rounded to-0 (zero negative? it's zero, negative).

  The zero negativity hand, the number of decimal string .vi is rounded up my whole numbers.

  The function is supposed to be converted in its entirety. Just go to help > show contextual help and read the description. The desired function is called fractional number of string.

• How to pass data to the tables according to the value of the first 4 digits of 7 strings of numbers

  I want to sort incoming data, in several bays based only on the first 4 digits of each string.

  For example, a hexadecimal string may be 41322033333533 which is A1 3353.

  A1 is a sensor. particularly, and I want to send all data from the A1 to a table. I have 8 sensors data and want to send the data to separate the bays of sensor. My sensor names are A1, A2, A3, T1, T2, T3, W1

  I will use a structure of the matter, for loop and a comparison of '=' for the data. However, I want to only compare the first 4 digits of the string and I can't find an operator for this. Any advice on how to proceed would be appreciated.

  With a thread like this

  

• Channel of String conversion to the data channel

  I have a problem I tried to accomplish through a. The URI of the file but can seem to make it work good for me.  I have an original data channel are in TEXT format and the data in the channel are the phone number in the format 6667779999 or 4343. Can someone help me with a suggestion of script to convert this. Most of my ATTEMPTS end with a 66.67779e5.  Can be simple but I can just figure it out.

  Thank you J

  Hello J,

  A number such as 66.6778888e5 can be shown as 6667778888 in a DISPLAY box or table or text REPORT or a axis of REPORT graph by using the display correct format string - in this case "d".  Where do you 6667778888 number appears like this in DIAdem, exactly?  If you want to see in a BULLETIN Board, you will need to choose the option button 'Selected channels' first in the configuration dialog box, and only then will you be able to choose a format string to display such as "d" for this column.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Reading about the digital data into the Scanner, followed of a string

  I am a student, new to Java and will be picking up in the semester at College next.
  
  I did my self-study using online tutorials and noticed that when I do this:
  
  Entrance to the parser = new Scanner (System.in);
  System.out.Print ("enter a number :");
  Try
  {
  double d = input.nextDouble ();
  System.out.println ("the number is:" + d);
  
  System.out.Print ("enter a number :");
  String s = input.nextLine ();
  d = Double.parseDouble (s);
  System.out.println ("the number 2 is:" + d);
  }
  catch the exception here irrelevant code
  
  Reading the data for education String s = input.nextLine (); is ignored. I guess it's because of the character "\n" remains in the buffer, am I right?
  
  My solution would be to put a statement (); input.nextLine before the String s = input.nextLine (); and it works. But it feels inelegant to remove the newline like that. Is there a suitable or more 'recognised the market' best way to do this?

  863720 wrote:
  I guess it's because of the character "\n" remains in the buffer, am I right?

  Yes.

  My solution would be to put a statement (); input.nextLine before the String s = input.nextLine (); and it works. But it feels inelegant to remove the newline like that. Is there a suitable or more 'recognised the market' best way to do this?

  It is the "standard". I wouldn't be too worried about this, the Scanner also is widely used in the real world as tutorials might make you believe.

• Beginner: How to set the label of the digital control programmatically?

  I have a digital control and I want to put the labels (and unit) programmatically. I've created a property for the text of the label node, and then it changed to a knot of Scripture. For now I have just son a constant in this property. When running I get the error "input unit is not compatible with the current unit." However, the property and the constant are strings "roses." Is what I'm trying to do possible? My apologies in advance for a noob question.

  You will not be able to change the value of the property label programmatically. Here is an article in the knowledge base that explains this and a way around:

  Programmatically change the label for a control or the indicator in LabVIEW

• Problem with the digital data to write VISA function

  I have a GE's PowerPC that is running on the VxWorks operating system. I have a tornado application where I run my C code to generate a file .o & .out, then I empty image .o files & .out for PowerPC via FTP, now I need to communicate with PowerPC of LabVIEW (via serial communication using VISA vi) using the VxWorks controls. When I enter orders VxWorks in LabVIEW

  That is to say for Eg: 1 > ls --> the contents of a directory list IE .o & .out files. The problem I'm facing here is, when I run the vi, I am able to read the file in the box to read the string but keep files on speeding up juice,

  2 > ld <> --> load a module object in memory. I face the same problem here.

  3 > then I need to type the name of funtion main c program, after which I can give input to the program.

  4 > I need to enter numeric data as inputs to my program. but the write VISA function accepts the only input string and read VISA function gives only out of string... I want to give digital entries and read the digital output.  Any help would be appreciated.

  Hi Luke,.

  You can try with this reliable hyperterminal VI.

  http://lavag.org/files/file/172-hyper-Terminal/

• How can I get the digital power meter?

  How can I get the digital power meter?

  I use a method similar to the example below to measure the market factor using the inputs of a multifunction data acquisition meter.  If the duty cycle is 0% or 100% for a given period, DAQ reading times out and returns an error.  In this case, I would get the digital state of the counter of entry so I can put as cycle to 0% or 100%.  I want to do it without knowing the digital port and line the entrance of counter... for example I would like to continue referencing DAQ/ctrX since I already have this information.

  The application uses an M series: PXI-6229 DAQ and LabVIEW 2011 to make a system customized for VeriStand.

  https://decibel.NI.com/content/docs/doc-12396

  For the moment I wired the block diagram to add a case structure to check the meter ID and string constants to set the identifier of digital input, as they share the physical connection.  As much as I can say that makes the specific code for the PXI-6229 (or any DAQ with only two counters that share connections with p2.1 and p) 1.4

  I have attached the VI sub.

  When the device is used with a different data acquisition, I can add the connection and/or separate control.  Looks like at least one will be necessary given that the meter can only detect the edges... I think it was the piece of information I needed.

  Thanks for your help!

• Acquire the values only when the digital output is high.

  Hello

  I work with test of transistor, whose door is controlled by the digital release of USB6289, related to BNC2120.

  Test plan:

  Door 1.transistor is enabled for 5seconds, with P0.0 for example

  2. then, everything remains off for 1secondes.

  3.p0.1 is used as digital output to activate the circuit passing him curent through in the opposite direction, P0.1 goes high for 3 seconds, PS: Gate is off.

  4. the same cycle repeats again.

  My question is to store values to the output of the transistor when P0.0 and P0.1 goes high, and these values should not change until my digital outputs respective again go high.

  I can access transistor by continiously read out my power supply values.

  and in the State off I want to read AI0 because at that time, my power supply is off, so that I can activate the circuit to pass the current in the opposite direction.

  Again, my question is to gain the output through power value when P0.0 is high and store them until the transistor turns on.

  and even for P0.1, acquire the value of output through AI0, when P0.1 is high and store it until it goes high again.

  Hopefully, I'm able to explain my problem clearly.

  Please help me.

  Concerning

  Anurag

  Think about what States (object:statemachine and determine when to use sequence Structures) do you want from t0... t(n-1), IF DAQmx generates outputs and/or inputs are absorbed and what needs to happen (event timed out), before move you on to the next 'State '.

  type def 'enum' with your different States:

  • initialize
  • wait (the user initializes times (sec) set for States, or whatever and presses button 'Start')
  • T0 (generate DigOutputs, store acquired data AnalogOutput (string output number) the register shift, before moving to the next State > user 'set time' must elapse (Note: the wait function allows you to control the rate of execution of loop and allow the CPU to respond to external events and system tasks and avoid using wait functions at the same time an operation of software...))
  • ...
  • t(n-1) if ' end (made requirement) "> goto 'stop', ' another (not requirement not)" > goto regardless of 'State '.
  • stop
  • write a text file of data (string).

• 0xc0000428 error - "Windows cannot verify the digital signature for this file."

  Original title: 0xc0000428 error

  I'm using Windows Vista and I already had the problem, "the Windows Boot Configuration data file is missing required information" which I have rebuilt the bcd for. Now it won't let me not restart due to the error 0xc0000428, stating "Windows cannot verify the digital signature for this file. How to do this?

  Hi Rajisace,

  ·         How long have you been faced with this problem?

  ·         You did it last changes before the show?

  ·         Please provide us with the file information in the error message.

  Method 1: Try to start the computer using the last good known Configuration and check if you can successfully start.

  Using the last good known Configuration

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 2: I will suggest you to do material clean boot and check to see if you encounter the same problem.

  1. right click on my computer-> properties

  2 Hardware tab Device Manager->

  3. right click on the sound card, video card and NIC, one by one, then click on turn off

  4 restart the computer.  If the problem is resolved, you can then enable the devices one by one to find the exact mechanism causing the problem

  After you find the device that is causing the problem you can solve by installing the latest driver or replacement of the unit.

  I will also propose you to check if the boot priority is set on hard drive and check if you experience the same problem.

  Method 3: Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important:  If all available hard disk data can be lost when running chkdsk, as the chkdsk attempts to repair the affected area.

  Hope this information is useful.

• How to extract the same song, several times using different bit rates or formats and store all the digital music files in WMP 12 default on the same HDD music library

  Using Windows Media Player 12 (w/under Windows 7), "can I ripping the same song, several times, using different bitrates & and/or formats and store all the digital music files in the music library by default WMP - 12, on the same hard drive?

  1.) #1 goal: tear up the same song repeatedly, w / "different rates" as a WMA file.

  2.) #2 goal: tear up the same song repeatedly, w / "different rates" as an mp3 file.

  3.) #3 objective: NOT to each subsequent copy (version) of the song, deleted & and/or replaced by the previous version of the song [even].

  4.) question Bottom Line Up Front--> is Windows Media Player 12 (included with the Windows 7 operating system) are able to achieve '#1 objectives; #2; & #3 above?

  5.) details/example: I want to tear the piece "Maria Maria by Carlos Santana" to my laptop as a Windows Media Audio [WMA] file.  In addition, I would like to rip the song 'Maria Maria' three several times with 3 different bitrates in format WMA; and, as an MP3 file.  Therefore, my final result wished (after the extraction process), will take place the four 4 audio files split up as follows: (a) 'Maria Maria by Carlos Santana'--> Format: file WMA; Ripped @128 Kbps bitrate.  (b) ' Maria Maria by Carlos Santana'--> Format: file WMA; Ripped to the "Variable bit rate; (c) ' Maria Maria by Carlos Santana'--> Format: file WMA; Ripped commissioning "Lossless." and (d). 'Maria Maria by Carlos Santana'--> Format: MP3 file. Ripped @256 Kbps bitrate.

  6.) my preference: I do NOT want to rename the file (s). {for example, 'Maria Maria by Carlos Santana' renamed/changed for--> "Maria_Maria_by_Carlos_Santana_128kbps.wma",...} 'Maria_Maria_by_Carlos_Santana_256kbps.mp3 '; etc.}.  In addition, I am not concerned about the additional disk space that will be consumed after multiple copies of the same song with different speeds of transmission and different formats.

  7.) my experience w / Windows Media Player 10 (w / the operating system of Windows XP): using WMP - 10, my goal (s) described above is not a problem at all.  Simply insert the CD purchased by Carlos Santana, containing the song "Maria Maria"... Select the desired Format (WMA; WMA VBR; WMA Lossless; or mp3)... Select the desired flow rate (WMA... 128/160/192kbps_mp3: 128/192/256/320 kbit / s; etc.) ; and click on the "RIP" button to start the copy process on the hard disk of of Carlos Santana's "Maria Maria".  This process (w / WMP-10) would result in having the same song, copied on the hard disk, with levels of quality different "audio" (via the different bit rate settings); regardless of the format (MP3/WMA) which was chosen.

  8.) my experience w / Windows Media Player 11 (w / the operating system of Windows XP): using WMP 11, to described above of my objective (s) could not be reached e-a-s-i-l-y.  The problem with WMP - 11 - in short - which was after the desired selection "Rip settings" tab 'Options' of WMP - 11 (i.e., Format & Bit Rate) and heart-wrenching piece wanted to {'Maria Maria by Carlos Santana'} a moment later/second, WMP11 remove / would crush the previous version of the song [even].  Therefore, the program would NOT allow the user to have multiple copies of the same song on the hard drive of the PC; which obviously restricts a user to have the freedom to choose what level of quality digital audio, they prefer to listen to.

  9.) the ability to have multiple copies [at my descretion] of the same song (on my hard drive) with different bitrates and formats in my music library, is important for me because it has a direct impact on "how I enjoy MY music ', and in what form (audio quality), I choose to listen to my music.  {For example, when I exercise and listening to my camera, digital audio player (Zune), a song ('Maria Maria by Carlos Santana'), will usually be torn off at a lower rate due to the unit of capacity reduction of storage - compared to the storage capacity of notebook PCs/desktop/external hard drives PC.}  However, when I listen to my music through my home cinema or entertainment system (which contains a hard disk dedicated with a large storage capacity), I prefer to load the entertainment system with digital music files that have been ripped to WMA... with the bit being rate-setting is for the: settings "WMA Variable Bit Rate" or "WMA Lossless.

  10.) there you have it.  This is my first post in this forum.  I hope that [detailed] explanations, will be sufficient to encourage these "with knowledge & the hands on experience" using Windows Media Player 12 (as well as with WMP-10/WMP-11 respectively), by providing a [step] "How-to"... "solution to my situation.  It would be highly appreciated.  I'm looking forward-'the solution' - and relevant suggestions & and/or community feedback regarding my request for assistance.

  * Thank 'All' (that would) in advance... For your time & Assistance *.

  Certainly, you can, but I would say that they be in different folders, for your convenience as well as Windows.  You can create one for each debit/format, then you will know who is who.

  In Windows Media Player, on the toolbar, select Tools, Options, Rip, and then select the flow you want first, rip music, then change the folder (higher on the same tab) and rip again... and so on and so forth.

  When you are at home on your home theater, you can use the 320 bitrate folder, when you transfer to the Zune, you can use one of the lower bitrate files (although I personally tear it up to 320 and let the Zune reduce as he wants, even with the iPhone via iTunes, hard drive space is not really a problem here) my server has several hard drives, and I can always add more if and when space is low!

• I'm attemppting to enter the programming unit to operate on an OUYA. I encounter this problem while fixing my game development environment.

  I'm looking to get into the programming unit and finally run that I develop on an OUYA. I encounter this problem while fixing my game development environment. At http://stevetack.com/ouya_unity_tutorial_01.html, I try to do this step:

  ------------------------------------------------------------------------------------------------------------------------------------

  Pull up the android_winusb.inf file in Notepad or your favorite text editor and add this section to both [Google.NTx86] and [Google.NTamd64] sections:

  ;OUYA Console
  %SingleAdbInterface% = USB_Install, USB\VID_2836&PID_0010
  %CompositeAdbInterface% = USB_Install, USB\VID_2836&PID_0010&MI_01------------------------------------------------------------------------------------------------------------------------------------
  

  He tells me that I can't change this in Notepad! It is of crazy! The truth is that I am God in my own digital universe. I am an administrator and my computer needs to be aware of this fact! This refers to an area of permission that I am not familiar with.

  Help, please.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Media Center incorrectly determines the digital tuner on my Hauppauge 1850 as incompatible to the Canada for digital channels over-the-air via antennas

  I have a hauppauge tuner card 1850. I live in the Canada. If I've set up media center with the Canada as my position the digital tuner is not recognized as compatible in my area. If I place the library with my position defined in the United States. The digital tuner is recognized and works very well. The downside is that I can not guide ads for my actual surface when I set the location in media center in the United States.

  http://experts.Windows.com/w/experts_wiki/enable-ATSC-and-QAM-in-Canada-for-Windows-7-Media-Center.aspx
   
  http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/f/25/t/85193.aspx
   
  could help you.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• To delete the characters only at the beginning of a string using regexp_replace

  I want to be able to delete the characters in a string only until the first numeric value.  If it takes place after the digital, I want to keep them.

  "for example"AB1234' becomes '1234', 'AB1234C' becomes ' 1234 C.

  It might be also spaces and other types of characters at the beginning.  I tried this:

  Select

  regexp_replace ('ABC1234', ' [^ [: digit:]]').

  regexp_replace ('AB 1234',' [^ [: digit:]]').

  regexp_replace ('AB 01234',' [^ [: digit:]]').

  regexp_replace ('AB1234C', ' [^ [: digit:]]').

  regexp_replace ('^ 1234', ' [^ [: digit:]]').

  regexp_replace ('* #1234Z ',' [^ [: digit:]]')

  OF THE DOUBLE

  For all except "AB 01234' returned '1234' so it retains the digital.    For "AB 01234' it returns correctly '01234'

  The bad are those with a character after digital, for example "AB1234C".

  I know it I'm missing something here, can someone please help with this?

  Thank you

  SQL> with t
    2  as
    3  (
    4  select 'ABC1234' str from dual
    5  union all
    6  select 'AB 1234' str from dual
    7  union all
    8  select 'AB 01234' str from dual
    9  union all
   10  select 'AB1234C' str from dual
   11  union all
   12  select '^1234' str from dual
   13  union all
   14  select '*#1234Z' str from dual
   15  )
   16  select str
   17       , regexp_replace(str, '^[^[:digit:]]+') str_new
   18    from t;
  
  STR      STR_NEW
  -------- --------
  ABC1234  1234
  AB 1234  1234
  AB 01234 01234
  AB1234C  1234C
  ^1234    1234
  *#1234Z  1234Z
  
  6 rows selected.
  

• How to choose the value of a string are numeric together and words of letters (for example, TEST)

  Hi all

  How to choose the value of a string are letters (for example, TEST) and all numeric...

  for example
  TEST 123456
  TEST 34567
  123456 ABCD
  1234 TEST
  TESTING 12345
  TEST 1@234$
  YOUR T 123456

  I want the results of the query as below.
  TEST 123456
  TEST 34567

  And I tried to use regexp_like in this case but without success. See the code below.
  SELECT * FROM TABLE WHERE regexp_like (Description, ' [TEST] % & [[: digit:]] + $');

  How can I do this, please answer.

  Thank you

  WF

  If you want to return only the rows that contain the string 'TEST', followed by zero or more space characters, followed by one or more digits?

  How about this:

  SELECT *.

  FROM my_table

  WHERE REGEXP_LIKE(description,'^TEST\s*\d+$')