Integrate the OBIEE report to the applet SIEBEL using realtime mode

Similar Questions

• Why can't I access the internet without using safe mode

  Help cannot access internet without using safe mode

  Hi Dharrington25,
   
  -Remember to make changes to your computer after that this problem started to happen?
   
  As you are able to access the Internet using the safe, put your computer in a clean boot state in order to identify the program causing this problem.
   

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See KB Microsoft article below for more information on how to solve a problem by performing a clean boot in Windows Vista or in Windows 7:How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Integrate the image to use in any application

  Anyone know how I can integrate an image into a Flex application that can be used anywhere in the application? I have several itemRenderers in my application. They all have something like this in it:
  
  < mx:Script >
  <! [CDATA]
  [Bindable]
  [Embed("assets/images/closeicon/closeiconup.png")]
  public var closeUp: Class;
  []] >
  < / mx:Script >
  < mx:Image id = "dragImage" visible = "false" source = "{closeUp}" width = "18" height = "18" / >
  
  
  I was lazy and made this way for each rendering engine. How can I integrate an image (with CSS?) while I only have a single Embed that makes my closeUp class available for use throughout the application?

  I found this all simply by creating a new public class that contains the Embeds, and then import the class into each component that needs to use the icons.

  I wanted to avoid having to still use an import statement, but this will do. If anyone know of a way to do this without importing anything or to import a script file, let us know!

• OBIEE reporting requiremnt:Display image based on the value of result report

  Hello

  
  

  I have an OBIEE reporting requirement, the report displays the result out of 10 based on a value selected in the command prompt dimension, what I want is if the score is less than 5, the image of warning should appear right in the report score with a sufficient distance and if the score is greater than 5, I want a right image tick.

  It will be a great help if someone will give me the solution as soon as possible, because I have a very urgent need.

  
  

  Thanks in advance.

  

  It took 3 clicks to hide the structure of the table...

  For the "how to return an image of the formula in the column" it's just the data format of the column that should be set to the URL of the Image and your column value must be the URL of the image. If you add a formula as CASE WHEN your_condition THEN 'http://.../picture1.jpg' WHEN your_condition_2 THEN 'http://.../picture2.jpg' END

  

• Planning the OBIEE reports

  I am planning the OBIEE reports to mail through the SMTP server, but this is show planning is competing with compensation and out there is in the average mail meail goes the recipeents.

  Please help me on this if someone has encountered this.

  The error that I do when I run the scheduling is less than

  Agent: / shared/kiraann/N_ATTR_Reports/agent

  [nQSError: 75005] Cannot send the AUTH command. SMTP server does not support authentication mechanisms.  Remove email credentials, or use a server that supports authentication.    Agent: / shared/kiraann/N_ATTR_Reports/agent

  ... Loop delivery SMTP to try again... Sleep for 3 seconds.    Agent: / shared/kiraann/N_ATTR_Reports/agent

  [nQSError: 75005] Cannot send the AUTH command. SMTP server does not support authentication mechanisms.  Remove email credentials, or use a server that supports authentication.    Agent: / shared/kiraann/N_ATTR_Reports/agent

  ... Loop delivery SMTP to try again... Sleep for 5 seconds.    Agent: / shared/kiraann/N_ATTR_Reports/agent

  [nQSError: 75005] Cannot send the AUTH command. SMTP server does not support authentication mechanisms.  Remove email credentials, or use a server that supports authentication.    Agent: / shared/kiraann/N_ATTR_Reports/agent

  ... Loop delivery SMTP to try again... Sleep for 5 seconds.    Agent: / shared/kiraann/N_ATTR_Reports/agent

  [nQSError: 75005] Cannot send the AUTH command. SMTP server does not support authentication mechanisms.  Remove email credentials, or use a server that supports authentication.    Agent: / shared/kiraann/N_ATTR_Reports/agent

  Exceeded number of SMTP delivery attempts.

  The Agent, test_a, completed with warning

  Thank you

  Thank you for responding. It's helped me. Problem is solved.

  Thank you

• Send an OBIEE report to the user no OBIEE Mail (customer) in OBIEE11g

  Hi Patricia,
  
  I'm fresher to OBIEE, I need step to 'send an OBIEE report the user no OBIEE Mail (customer) in OBIEE11g. searched on-line got only OBIEE 10 g Documents that one also followed but no results. Please help me... step to config a courier for external users.
  
  Thnaks,

  That the SMTP server configured by your admin and create a privilege given to your role agent. Then schedule an Agents to yourself / Testuser with the report to be sent to external users as its content. Configure the profile of delivery to the recipient. In the implementation for electronic device - profile of delivery specify the external e-mail address. This might be useful

  http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/FMW/bi/bi11115/delivers/alerts.htm

  Thank you.

• Go to the Microsoft Office Document in OBIEE report

  Hi all
  
  Client has a requirement where he wants access to the Office Document (located in the shared location) of OBIEE report when clicked on the value of data. Can someone let me know, if that's possible, and what are my options. A line of guide in the right direction will be first.
  
  Thank you
  D
  
  Published by: BIDeveloper on September 27, 2010 12:04

  A standard link by using a UNC path to your shared drive should work fine. See:

  http://en.Wikipedia.org/wiki/Path_%28computing%29#Uniform_Naming_Convention

• How the parameter values can be passed to OBIEE reports of the user interface

  Hello
  
  Does anyone have an idea on how to pass parameters to the UI (user interface of a java application) to
  OBIEE report page. Based on the value of the parameter passed, the report page should be displayed for ex: the product
  name must be selected in the user interface, then the page of the report must show sales for this product
  Alone.can u please let me know how this can be achieved. Any help would be appreciated.
  
  Thank you
  Leela

  Hi Leela,
  What you're looking for can be accomplished with GO URL, see here:
  http://download.Oracle.com/docs/CD/E12096_01/books/AnyWebAdm/AnyWebAdm_APIWebIntegrate6.html#wp1005251

  Kind regards
  Alastair

  Published by: AlastairB_UK on October 26, 2009 15:27

• take off the borough in OBIEE reports

  I have a report with 10 columns, when all values are zero, so I need to remove that line of crresponding report.
  
  I wrote a filter condition where (col1! = 0 or col2! = 0 or col3! = 0 or... col10! = 0)
  
  I have a value of 0.1 in one of the columns. He is shown as a zero in the report... Since it has 0.1 this line is not eliminated report which is good. BUT my report shows that the value 0 instead of 0.1
  
  How take off rounded without going into the properties of each column and substituting the default values?

  Column-> Data Format format->
  Locate the default alternative size data
  Treat the numbers as--> number
  Decimals Select 1 or 2

  You may be able to save the configuration by using the Admin user so that all users can see the same format.

  Published by: Srini VIEREN on March 25, 2013 14:53

• How can I get Firefox to run and view the applets without asking my permission for each of them?

  Whenever I load a web page with a new applet, I wonder if I want to run it. I don't want to. I want just the applet to run. I read in the help section on the use of the java console, but I can't find how to display the java console either.

  Hello, lower the security level in the java settings in the system control panel: http://www.java.com/en/download/help/jcp_security.xml

• NB200 - how to integrate the audio drivers for Windows XP Home edition?

  Can you give me an idea for my Toshiba NB200 guy.

  I use nlite and don't create addons for my realtek (audiodriver) but it no chance that the installation is not successful.

  Toshiba has a software to create an audio driver windows xp built-in?

  Thanks in advance...

  Toshiba does not provide any software to integrate the drivers, but Toshiba provided software to create the own recovery disk (or recovery media)
  The creator called pre-installed software Toshiba Recovery Media (disk beginning) created the recovery disc to install the image of Toshiba.

  But this software was available on laptops with preinstalled system. He of not ready for download.

  However, I used nLite repeatedly in the past and never had serious problems to add additional drivers to my Win XP system.
  I have created my new installation disc and added all Win XP Service Packs.

• create the new file using report generation express vi

  Hello

  In my application, I need to write that certain data in spreadsheet Excel. For whom I created an excel template and I used the express vi report generation Toolkit to record appropriate data in the columns of the place. I need a new file created every day by the name of the day and write the data that he rest of the day. I have problems, create the new file using this express vi. I tried to use the low level vi but not able to make properly.

  Join my code and the excel template.

  Help, please.

  Thank you!

  I suspect that your problem is illegal characters (' / ') in your path, certainly it is the case in your original vi. You need to format your path, something like this (underscore instead of a slash stroke):

  

• Integrate the ICB with web interface

  Hi all

  We already have a CVI writes to order any of our instruments. We must develop a web interface to pass parameters to the CVI. In addition, currently the data is generated by the BCI as .csv files. What more we need to do is to transfer the data to a database as well. I did some research and discovered that Measurement Studio provides a .NET environment to control instruments. In addition, I think that the CVI/SQL Toolbox should be able to solve my problem of database. My question is who will Measurement Studio I want to integrate the CVI already present and communicate with him using a web interface? If so, what me does establish this communication?

  Thank you

  Kanu

  Kanu,

  Unfortunately, there is no easy or good way to create a web interface with CVI directly.  You can do this in Visual Studio with Measurement Studio, but you will at least need to the professional edition to do because you want to use web forms.  There are some resources with more information on the web forms, including this Walkthrough.

  Since you already have an investment in CVI, I don't understand why you don't want to throw just as work on.  According to the works of your code, you have a few options on how you try to bring together these two languages.  You can try to make your C code in a DLL and call it in the .NET application, as in this discussion of the call to invoke from managed code.  However, a better solution would probably be to use Of network Variables to communicate between the two programs.  Then, you can limit the .NET application to be mostly just a control interface that writes to the network variables, which are then used in the CVI program that you've already written.

  Hope this helps,

  Jen W

  Technical sales engineer

  National Instruments

  NI.com/support

• How to integrate the 2 buttons

  Hello

  I tried to integrate the two buttons. I mean: when I switch on the first button, it will disappear and the second convocation, when I turn on the second button - first appears while the second is hidden.

  Help, please

  Kind regards

  Mike

  MeeHow wrote:

  I do not want to cause I'm running LabView continually and it's make the problems (program won't leave this structure and I can not use the other buttons, cheating etc.)

  One of the first things to learn is spelled "LabVIEW" and not "LabView".

  So is running continuously there are problems, why you insist on the use of this tool for debugging? Why do you not use "another button" or "cheating"? What structure may not leave? You may have a few simple beginners problems that would be very easy to solve if you give us more details.

  In any case, here's my solution of the radiobutton. I've also attached a simple VI to use it. Look ma, no code!

• Integrate the external trigger into camera (PCI-1424)

  Hi all

  I use a PCI 1424 acquisition card to take the image of a Kodak "camera".

  Currently, I put the camera on a continuous mode - in which the camera give me frames one after one. I am able to 'snap' or 'capture' images of MAX with the help of the camera file. I can write a simple VI for 'break' a single image in LabVIEW.

  Now, I want to go to the single camera viewing mode. In this mode, the unit will display a single image to a trigger signal (the rising edge of a singal TTL).

  I wrote a short program for parallel port allows to send this signal triggered at the camera. The increase in power to the camera temporialy, I know that the camera captures an image.

  However, the question is how can I nathalie caron this image?

  What I do now, is to select 'snap' a picture to the MAX and allow a delay of 10 sec. After you click on the snap, I'll go to LabVIEW and send the trigger signal to the camera.

  However, in MAX, I altenativley had a black and white image that is of the Court a false image.

  does anyone know the reason?

  and how do I integrate the VI trigger in the captuire VI image, so that I can finish the task of single capture inside a VI?

  There is a sample VI "Grab.vi triggered" in which user can set waiting time and other properties for IMAQ1394, but I do not know how to PCI1424

  Thank you very much.

  Dear John,

  I have attached this VI.

  LabVIEW 7.1

  Framegrabber: PCI 1424

  Trigger the camera: after set us the camera in mode single shot (by rider material), I just need to send a signal of TTL and the camera will trigger in the front of this signal. So I schedule a pulse to the OID 0 pins at this TTL signal output.