Integrate TMS with WebEx through a proxy

Similar Questions

• Metadata for WebEX through proxy stream

  Hello

  My client is using WebEX meeting through a proxy server.

  Therefore, the port of destination of the WebEX package number is 8080.

  In this case, is the package identified by metadata stream?

  Kind regards

  Mitsuhiro

  Mitsuhiro salvation,

  If a proxy server is in the path between the customer of WebEx meeting and WebEx's data center. The flow between the client and server proxy will be represented by the metadata stream. Since the proxy to the WebEx datacenter server the flow will not be represented by metadata stream. It should be integration in the proxy to the proxy traversal (think of something similar to an ALG metadata) for metadata.

  [PC]-[proxy] - Internet-[WebEx DC]

  [PC] [proxy] will be covered for the metadata.

  [proxy] [WebEx DC] is not currently covered by metadata.

  In a situation of no-proxy (for example, the video stream below), metadata coverage would be between [PC] and until the NAT/FW.

  In the example below, the proxy server is 10.81.74.42 port 9090. The client is 10.4.9.12. There are 4 flows that are representative (control, data, data, and video). Video traffic is UDP traffic and directly by going to the Internet without going through a proxy. In other cases, the video stream itself could have through the proxy server.

  ====

  3009R1-BB0206 #show flow of metadata

  Return to Protocol DPort SPort entry exit SSRC

  7 10.81.74.42 10.4.9.12 TCP 9090 38319 Gi0 gi1/0/1 article 0

  5 10.81.74.42 10.4.9.12 TCP 9090 38313 Gi0 gi1/0/1 article 0

  6 10.81.74.42 10.4.9.12 TCP 9090 38315 Gi0 gi1/0/1 article 0

  8 64.68.119.235 10.4.9.12 UDP 9000 63300 Gi0 gi1/0/1 article 0

  3009R1-BB0206 #show metadata flow local-flow-id 5

  SPort DPort penetration Protocol I / F output I / F

  10.81.74.42 10.4.9.12 TCP 38313 9090 GigabitEthernet0/1 GigabitEthernet1/0

  Metadata attributes:

  Tag application: (414)

  Group application: webex

  Application provider: Cisco Systems, Inc..

  Application category: audio-video.

  Application under category: control and signalling

  Device application class: Office-conferences

  Type of media application: data

  Identifier of the unknown (147): [00 00 00 06]

  Identifier of the unknown (148): [00 00 00 06]

  Identifier of the unknown (150): [00 00 00 02]

  Application name: webex meeting

  Application version: T27

  Model of end Point: meeting webex customer - data

  Matching filters:

  Direction: IN:

  Direction: OUT:

  3009R1-BB0206 #show metadata flow local-flow-id 6

  SPort DPort penetration Protocol I / F output I / F

  10.81.74.42 10.4.9.12 TCP 38315 9090 GigabitEthernet0/1 GigabitEthernet1/0

  Metadata attributes:

  Tag application: (414)

  Group application: webex

  Application provider: Cisco Systems, Inc..

  Application category: audio-video.

  Application under category: control and signalling

  Device application class: Office-conferences

  Type of media application: data

  Identifier of the unknown (147): [00 00 00 06]

  Identifier of the unknown (148): [00 00 00 06]

  Identifier of the unknown (150): [00 00 00 02]

  Application name: webex meeting

  Application version: T27

  Model of end Point: meeting webex customer - data

  Matching filters:

  Direction: IN:

  Direction: OUT:

  3009R1-BB0206 #show metadata flow local-flow-id 7

  SPort DPort penetration Protocol I / F output I / F

  10.81.74.42 10.4.9.12 TCP 38319 9090 GigabitEthernet0/1 GigabitEthernet1/0

  Metadata attributes:

  Tag application: (414)

  Application name: webex meeting

  Group application: webex

  Application category: audio-video.

  Application under category: control and signalling

  Device application class: Office-conferences

  Media application type: control

  Application provider: Cisco Systems, Inc..

  Application version: t27

  Model of end Point: meeting customer webex - control

  Identifier of the unknown (147): [00 00 00 0a]

  Identifier of the unknown (148): [00 00 00 06]

  Identifier of the unknown (150): [00 00 00 02]

  Identifier of the unknown (149): [00 00 00 0a]

  Matching filters:

  Direction: IN:

  Direction: OUT:

  3009R1-BB0206 #show metadata flow local-flow-id 8

  SPort DPort penetration Protocol I / F output I / F

  64.68.119.235 10.4.9.12 UDP 63300 9000 GigabitEthernet1/0 GigabitEthernet0/1

  Metadata attributes:

  Tag application: (414)

  Application name: webex meeting

  Group application: webex

  Application category: audio-video.

  Application under category: voice-video-chat-collaboration

  Device application class: Office-conferences

  Application media type: video

  Application provider: Cisco Systems, Inc..

  Application version: t27

  Model of end Point: customer webex meeting - video

  Identifier of the unknown (147): [00 00 00 05]

  Identifier of the unknown (148): [00 00 00 02]

  Identifier of the unknown (150): [00 00 00 01]

  Matching filters:

  Direction: IN:

  Direction: OUT:

• Software exists for the creation of a 'virtual' network card and going to all the traffic on the local network through a proxy server, then by this adapter?

  I can access net through LAN and my college requires a proxy for all access to the internet. If you want to use the internet, it is impossible to do not use a proxy. This is a problem for many programs that do not seem to allow you to enter the proxy settings.

  any software is to create a 'virtual' network adapter that will pass all traffic network (or any protocol x traffic) through the proxy?

  So I have do not need to enter the proxy anywhere... and I have normal internet access.
  What I saw is possible with OpenVPN, but it is a vpn service that I need .i just want to use the feature. In OpenVPN I just enter my proxy server in its framework and OpenVPN to connect to a VPN service and routes all traffic to the FAUCET adapter after which I don't need to set the proxy address anywhere... so my idea is how can I use only the last part that is routing all my LAN traffic to a virtual card.

  Support the LAN---> proxy---> virtual adapter--->, then software I access the net

  That's what I like to do...

  Although I am facing this problem on Windows 7, solutions for all operating systems are welcome.

  P.S: Proxifier is not my solution to not offer something like this.

  Hi Sapan,
  Thanks for posting in the Microsoft community!
  You can use your favorite search engine and look for the software that meets your requirements.

  WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Resilliency planning TMS with driver

  Hi all

  We plan to put our cluster 8710 2 blades behind the conductor, now programmed with WebEx conferences are supported. We also add an additional 8710.

  Here is what I intended with respect to the design of driver:

  Service preference

  Hen Bridge 1-8710 cluster

  Marked for planning

  Used for the CMR / appointment conferences only failing 8710 in pool 2

  Blade 2-8710 pool deck

  Unmarked for planning

  Used for only scheduled conferences if 8710 cluster in pool 1 fails

  If an existing scheduled conference is set to start at, say 10:00 and 09:00 8710 at the Bridge Pool 1 cluster fails, conductor forward this conference automatically to the Bridge Pool 2?

  We all want CMR / appointment conferences to automatically use the default Bridge Pool 2 and don't use Bridge Pool 1 if the 8710 in Bridge Pool 2 fails.

  The above version works for my scenario?

  What you have above, is correct for the planning, see example 2 of the planning section of the examples of the conductor with the TMS Deployment Guide.  However, in the case of a failover bridge, TMS does not guarantee that there are enough resources as the secondary bridge is shared with the announcement of conferences ad hoc it is not enabled for the planning, so TMS will monitor not his ability to do that there are enough resources for scheduled conferences.

  Regarding your failover scenario, if a bridge fails, conductor detects this and start to use either the next bridge in the pool or service preferences.  I'm not sure of the time, but it will happen in a minute or two.

  However, you will need an additional service for RMC preference / conferences appointment containing the pools two bridge in order reverse just like what you listed, but in this case, none of the bridges will be marked for planning.

• Migration tool - using a connection through a proxy

  Hello
  
  My Internet connection is through a proxy. How can I configure the Migration tool to use that proxy? Is this possible?
  
  Otherwise, the error message is: an error occurred when connecting to the Oracle for CRM on demand server.
  
  I did a test with a direct (without proxy) connection to the Internet and it works, but unfortunately I need to use a proxy.
  
  Has anyone already done this?
  
  Thank you
  Simona

  Simona Hello,

  Edit the MigrationTool.bat file where use can find the following line

  "%JAVA_HOME%"\bin\java-Djava.util.logging.config.file="%ODESA_HOME%"\odesa.logging.properties-Dodesa.config.file="%ODESA_HOME%"\resources\OdesaConfiguration.cfg-Dodesa.home="%ODESA_HOME%" - jar "% %ODESA_HOME%"\odesa.jar. "

  It changes as shown below

  "%JAVA_HOME%"\bin\java -Dhttp.proxyHost = proxyhostURL - Dhttp.proxyPort = proxyPortNumber - Dhttp.proxyUser = someUserName - Dhttp.proxyPassword = somePassword -Djava.util.logging.config.file="%ODESA_HOME%"\odesa.logging.properties-Dodesa.config.file="%ODESA_HOME%"\resources\OdesaConfiguration.cfg-Dodesa.home="%ODESA_HOME%"-jar "% %ODESA_HOME%"\odesa.jar. "

  I added the Java Options for Proxy as the host, Port, user name, the password make sure that you set the correct information and run the batch file.

  Hope this helps :)

  Kind regards
  Deepak: kamal

• Activation of roles through the Proxy authentication

  Hi all
  I have a question to turn roles via the proxy authentication.
  
  It is an example of my environment:
  
  3 users:
  -SCHEMA_OWNER
  -PROXY_USER
  -APP_USER
  
  1 role:
  -SCHEMA_ACCESS
  
  Role SCHEMA_ACCESS has all subsidies for the selection, insertion, in the SCHEMA_OWNER tables. PUBLIC SYNONYMS have also created por these objects.
  
  We'll see
  
  GRANT SCHEMA_ACCESS TO APP_USER.
  ALTER USER APP_USER GRANT CONNECT BY PROXY_USER WITH ROLES SCHEMA_ACCESS.
  
  Now, APP_USER can access the tables of the SCHEMA_OWNER directly or via the PROXY AUTHENTICATION.
  The question are how to configure APP_USER to access these objects only through the proxy authentication and prevent access if APP_USER connects directly to the database.
  
  Thanks in advance.

  Try again with a secure application role: http://download.oracle.com/docs/cd/B19306_01/network.102/b14266/politips.htm#i1006355

• Exception of HTTP after migrating TMS with TMSPE

  Migrated 13.2 TMS with TMSPE physical server in VM 2008R2, which went well, however, VCS - C is now sent me some exception HTTP State for all services supply; users, directories, and devices.

  Status: failed

  Answer: HTTP Exception

  Reason: HTTP error (400): WWW-Authenticate

  And yet, diagnostics in TMS TMSPE shows no alarm; It's all green.

  However, TAC is working on it.

  Someone at - he seen this before?

  /Jens

  Thanks for the clarification, Jens and I'm talking internally for all involved here because it seems we have "several hands in the kitchen" (as well as the different cuisines) concernng this one... which means that we will use the official channels for troubleshooting it and we'll just update this thread with leading... agreed?

• New Migration TMS with an old backup of the old server for TMS

  Hi all

  Since the Migration of data to the new server of TMS with the old backup of TMS old we have problems to access the MSDS server over https.

  Could be the reason of this problem, the old database movement?

  I checked all the Services of the Windows Server Manager 2008\ IIS and all other services, but without success.

  Is perhaps a few services that I forgot? Or other things?

  I thank for your feedback

  Solved

  HTTPS was not enabled in IIS on the server. Created a self-signed certificate and limits only the default Web page and it worked fine, locally and externally.

  / Magnus

• How to cancel property integrate Skype with Hotmail

  How Cancel property to integrate Skype with Hotmail?

  I do not understand your question, but see if something here helps.

  See "can I unmerge my Skype and Microsoft accounts?

  What happens when I merge my Skype and Microsoft accounts?
  https://support.Skype.com/en/FAQ/FA12060/what-happens-when-i-merge-my-Skype-and-Microsoft-accounts

  http://www.Google.com.au/search?q=merge+Skype+with+Hotmail&SourceID=IE7&RLS=com.Microsoft:-to THE: IE-address & ie = & oe = & redir_esc = & ei = hk3jULq1J66aiAf95YGgDg

• Impossible to select and move the letters while playing 'Word with friends' through facebook

  Original title: play games

  During playback "words with friends" through face book... I can't select and move the letters on the touch screen without the screen, scrolling up and down.
  I need the touch screen to allow the movement of the letters c A C H, etc. on the game board without scrolling of the image of the screen!
  Several of my Face book games does not load completely without hanging... both Adobe Flash player and Windows are also perfectly up-to-date.
  Kind regards

  Hi Stephanie,

  Looks like you are unable to play words with friends on Facebook and also problems with other facebook games.
   
   
  Since you are faced with a design problem with the play on words with friends on facebook, I suggest you to contact the administrator of the game to get more information about the compatibility of the game in Windows RT. You can also ask if they provide latest app for the particular game.
  
  support.Zynga.com/Home/Words-with-friends
   
   
  I would also ask you to contact Facebook to get information about other games:
  http://www.Facebook.com/help/
   
   
   
  Hope this information helps.

• Cannot install applications through Microsoft store in Windows 8 Pro: using the internet through the proxy: detected 'No. Internet Connection' Error statement

  I study in a University, and we have access to the internet through the proxy. We just need to put in the proxy port: in the settings of internet explore and authentication additional etc. is not necessary to access the internet. Everything else is working well, including windows update and even browse apps in the store of Ms. But I'm unable to install any application. Help, please.

  In fact here in ITI, all our internet traffic is routed through a proxy (to stop the torrent, filter things etc.). To remove the proxy is not an option.

  I solved the problem by using the following commands as an administrator:
  netsh
  WinHTTP
  import proxy IE

• Anyone know a good event management tool that integrates well with Eloqua?

  Anyone know a good event management tool that integrates well with Eloqua?  The tool would deal with everything associated with the event as: management agenda, registration, monitoring, reports, etc., but integrated with Eloqua in a way that allows you to trigger emails to confirmations, reminders and thank you and facilitates the exchange of information of contact/participant and campaign.    Think of something as integration between Eventbrite and Eloqua (although we are not looking at Eventbrite specifically).

  Any suggestions?

  Hi Kurt -.

  We've been Cvent users for two years and it integrates very well with Elouqa. If you have any specific questions, feel free to give me a shout - I manages all our events and am happy to give feedback.

  See you soon,.

  Laura

• CC Desktop App trying to go through the proxy, but it is disabled

  We have a proxy HTTP/S, and Creative cloud just don't like him. So in order to get a creative cloud works, I'll try to bypass the proxy and go straight on the internet connection. I did, and internet works, however, creative cloud is always get stuff of proxy from somewhere and try to go through the proxy. We have a CIP Automatic Proxy script, and I have this turned off in Windows. I am at a loss as to why creative Cloud is always picking up the proxy information, even if Windows is turned off. Where the creative cloud enter proxy information to?

  Hello

  Please see Proxy support Adobe Creative products cloud and set up for use behind firewall network

  Hope that helps!

  Kind regards

  Sheena

• I have just insalled LR6 into the dev module, I see no picture, but only a blue window with lines through it. Can you help me??

  I have just insalled LR6 into the dev module, I see no picture, but only a blue window with lines through it. Can you help me??

  In the Lightroom preferences, uncheck the box, 'GPU use' on the performance tab.

• 1119: access of property may be undefined with currentFrameLabel through a reference with static type f

  1119: access of property may be undefined with currentFrameLabel through a reference with static type flash.display:DisplayObject.

  line with the error: if (holder.getChildAt (i).currentFrameLabel.search ("false")! = - 1) {}

  any help?

  Try:

  If (MovieClip (holder.getChildAt (i)).currentFrameLabel.search ("false")! = - 1)