Integrated personalized with slideshow banner

Similar Questions

• Live Mail will not receive any emails with slideshows

  Howdy

  My new computer with windows 8 and Live Mail will not receive emails with slideshows or many photos attached.

  While my old laptop with windows 7 Live Mail will receive these same emails.

  Any ideas?

  Larry has soon

  I would ask uninstall you Windows live mail and then install it back and see if it helps to overcome the problem.

  In addition, check this:
  http://answers.Microsoft.com/en-us/w...b14b21f?auth=1

• HP integrated module with Bluetooth for Microsoft Windows 7 wireless technology

  Hello

  Recently installed windows 7 in my system. My dv6330ea model No. - HP Pavilion Notebook PC. Check out the link http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&lc=en&product=3411896&

  Here are the details mentioned in the Device Manager

  Bluetooth radios

  HP Integrated Bluetooth module

  USB\VID_03F0 & PID_171D & REV_0100
  USB\VID_03F0 & PID_171D

  Microsoft Bluetooth enumerator

  BTH\MS_BTHBRB

  -------------------------------------------------------------------

  can anyone provide the latest drivers from Hp that is to say spXXXX.exe that will help my system? I'm confused little

  sp44774.exe  

  Version:7 (19 October 2009)

   

  Supported devices and features
  VID_03F0 & PID_171D = 'Module integrated HP with Bluetooth wireless technology'

  VID_03F0 & PID_2A1D = 'Module integrated HP with Bluetooth 2.1 wireless technology'

  VID_03F0 & PID_231D = 'Module integrated HP with Bluetooth 2.1 wireless technology'

   

  Model of support material in

  Computer laptop HP Pavilion dv4 series
  HP Pavilion dv6 Notebook PC Series
  HP Pavilion dv7 Notebook PC Series, etc.

  -------------------------------------------------------------------------------------------------

  sp47022.exe   

  Version:7 (22 January 2010)

  Model of support material in

  HP Pavilion dv3 Notebook PC Series
  HP Pavilion dv5 Notebook PC Series
  HP Pavilion dv6 Notebook PC Series
  HP Pavilion dv7 Notebook PC Series
  HP ProBook 4525 s Notebook PC
  HP ProBook 5220 m notebook PC, etc.

  Supported devices and features
  USB\VID_03F0 & PID_231D = 'Module integrated HP with Bluetooth wireless technology'

  USB\VID_03F0 & PID_171D = 'Module integrated HP with Bluetooth 2.1 wireless technology' USB\VID_03F0 & PID_2A1D = 'Module integrated HP with Bluetooth 2.1 wireless technology'

  --------------------------------------------------------------------------------------

  Which one to install or provide me with the last being?

  Or

  Install the version of vista to windows 7, which came with pre-installed i.e sp34275.exesupport download and driver HP Pavilion notebook dv6330dea

  Hello:

  I don't think that the Vista driver works the bluetooth under W7.

  It is the latest version of the HP bluetooth software driver W7:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-81348-2&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0001

• Why do I get emails intended for person with completely different e-mail address?

  Why do I get emails intended for person with completely different e-mail address? some of the Emails are addressed to names nowhere near the same spelling to my address and I always get them

  You CAN receive email if your email is added to the BCC list [1].

  Most spammers use this medium to spam others.

  [1] http://en.wikipedia.org/wiki/Blind_carbon_copy

  See you soon!

• HP integrated module with Bluetooth wireless technology

  Hello

  I just upgraded my pc to win 8, and I need this driver «Module integrated HP with Bluetooth wireless technology»

  Could you please help me! ?

  Just that, best regards!

  Rodrigo

  If you need drivers, follow these steps:
  1. in search of charms bar type devmgmt.msc. Select the file resulted in the left pane. This opens the Device Manager.
  2 unknown devices would be listed as such and plotted with a yellow question mark.
  3. Select the unknown device or any other device you need of drivers and right-click to access the properties.
  4. in the Properties window, click the Details tab and select Device Instance of Id or hardware ID from the drop-down.
  5. an alphanumeric string, like this DEV_7130 & PCI\VEN_1217 & SUBSYS_012F1025 & REV_01\4 & 6B16D5B & 0 & 33F0 is the marker for the identification of the unit.
  6. Please provide this number so we can offer you the appropriate driver.

• Are there examples of what the iPad screen looks like the enterprise level without storefront with a banner of entitilement?

  It seems that all the magazines I opened that DPS has a store front. We want a subscription button to ours with a banner of law, and would mask the iOS subscription. I would like to see some visual examples of this. We are going in this direction and I would also like to know what other resources I should so I can get the design work carried out before the launch. Y at - it a tutorial Adobe TV, I can look at? I read this page: https://helpx.adobe.com/digital-publishing-suite/help/create-custom-viewer-app-ipad.html

  Can you direct me to more resources?

  Melissa

  Here is an article on creating a proof of concept apps:

  Creation of Concept Apps for DPS validation | Adobe Developer Connection

  After you build your application development, let us know if you have any questions.

• Right slideshow banner

  I have an application universal binary for my DPS application and want to use the slideshow right banner for my library. I'm having a problem with the scaling for both devices, since there is no way to download assets separated by device.

  My only solution is to find a happy relationship of the banner that works on iPhone and iPad?

  Jason

  If you use the banner of the slide show right out of the box, then Yes, you have to find a banner design that works well on the iPad and the iPhone. For example, you can center the text and make it no larger than 320 pixels. Otherwise, you need to export the code, modify it and add it to your own server.

  It would be great if Derek would allow the assets of separate banner for iPad and iPhone into universal apps. I'll ask him, but he's a busy guy.

• Offering personalized with GANYMEDE + (ACS 5.4) - NX - OS RBAC limited access

  Hello

  I created the RBAC personalized depending on NX - OS.

  Role: Limited_Admin

  11 denies config t command. mgmt interface 0

  10 permit command read

  9 permit config t command. interface *; *

  8 allow the copy running-config startup-config command

  7 permits ping command *.

  6 allow the traceroute command *.

  I created a profile Shell with the following attributes that place the user in the role of Limited_Admin and that mapped to the rule of authorization policy.

  Cicso-av-pair attribute

  Mandatory requirement

  Shell: roles of value = "Limited_Admin".

  When I connect with the Test account - I get mapped to the custom role as shown below but I have priv 15.

  user: testrbac

  roles: Limited_Admin

  account created through the REMOTE authentication

  Credentials such as ssh server key will be cached only temporarily for this user account

  Local login is not possible

  Any help is greatly appreciated. I had this working perfectly on the 4.2. but unable to make the rules work at 5.4.

  Configuration of the AAA Nexus:

  radius-server key *.

  source-interface IP Ganymede mgmt0

  RADIUS-server host x.x.x.x

  AAA group Ganymede Server + ACS SERVERS

  Server x.x.x.x

  the vrf use management

  AAA group Ganymede Server + ACS SERVERS

  AAA authentication login default group ACS-SERVERS

  AAA authentication local console connection

  Default accounting AAA group ACS-SERVERS

  AAA authentication login error-enable

  I saw it and that's what I wanted to see and use it as a syntax/format on nx under role

  ike this
  Role: Limited_Admin
  11      deny    command                         configure terminal ; interface mgmt0
  

  However I think you tried and confirmed that it didn't ' work so I started to think it might be a bug in the Os. Glad it works for you.

  Jousset
  * Note help messages *.

  Sent by Cisco Support technique Android app

• Integration: Jabber with VCSC

  Hi experts,

  I'm new in the world of telepresence and I will install into a new customer a solution with VCSC, TMS and MCU.

  The customer already has a CUCM with Jabber and they want to deploy the Jabber with VCSC, they want that, for example, a Manager actually a video conference with other offices through your Ipad with Jabber

  I have not found a document with this configuration, can someone help me with the documentation of this integration?

  With their experience of telepresence, including the complexity of this integration? Can give me of highlights and key points of this integration?

  Best regards

  In addition to what Alok suggested, there are other things, you should consider:

  • The version of the recommended software is CallManager 8.6.2 and later (you can try 8.5.1, but there is no support BFCP)
  • It must integrate CallManager and VCS by following this document:

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/VCs/config_guide/Cisco_VCS_Cisco_Unified_Communications_Manager_Deployment_Guide_CUCM_8_9_and_X7-2.PDF

  • To enable content sharing between registered in CUCM Jabber and the end point registered in VCS, make sure that your Jabber in CUCM devices have a SIP profile with BFCP protocol enabled, as well as the setting "Allow presentation sharing via BFCP" set to allow.
  • If you want to schedule conferences in MSDS for the Jabber in CUCM, you can add them to TMS as a 'room '. By using this option, you will be able to plan the Conference and the calendar control (it's better than using the Participant model)
  • About the phone book, you might have some problems. If your devices registered in VCS use device with an alphanumeric URI address, for example [email protected] / * /, you will not be able to add this contact to Jabber clients registered with CUCM, alphanumeric once is not supported. A solution would use only digital device address for all devices. About Jabber for Telepresence, you can define directories using TMS, in this case, you can add contacts without problem, either using a digital or non-digital address.
  • If you have endpoints another enrolled in CUCM who will call the end points registered in VCS, make sure your devices are running compatible software versions, mainly the videophones. It is strongly recommended to use the latest version of the software.
  • Be aware that Jabber for Telepresence doesn't support Instant Messaging, as the common Jabber support with presence server

  I hope this helps.

  Paulo Souza

  My answer was helpful? Please note the useful answers and do not forget to mark questions resolved as "responded."

• IOM 11.1.2.2.0 Email Notification to any person with a specific role

  Hi all

  I created notifications sent to a user and Manager by using event handlers in the IOM 11.1.2.2.0, but I met a new use case. I send out notifications to an entire group (100 users) who all have the role of approver. This notification will be be telling them they have a pending approval.

  These notifications will be sent to them at a stage 2 or 3 multi-stage. So when a person of the 1st stage approves the request notifications will be sent to everyone with the role of approver for the 2nd multi-stage procedure. The notification will be those that have the role of approver to say they have a pending request. It is best to do SOA or IOM and what is the approach needed to make it from one of those who? As I said I have never sent notifications to a single user not a group.

  If you want more information, or for me to elaborate further please let me know.

  Thank you

  JS

  Here I am not unfortunately

  You can insert some Java tasks in your BPEL process for sure (to use the IOM API to get a list of users in a role). You can also call the IOM SPML web service, if it is enabled for the same purpose. I think the real gurus can help you with that

• problem with slideshow

  My slideshow doesn't quite work:)

  problem must be with synchronization of music files once I unchecked that and went for manual of this kind of work, but would be nice to have this problem

  Thanks for your reply anyway

  Concerning

  Kamil

• Persona with roaming profiles manager

  Hello people, hope you can help me out here!

  NOTE: I've updated this issue.

  The original question is far greater.

  We want to use character whose profiles management; the profile path is set in the attribute of "profile path" users AD.

  Set us up, as defined by Microsoft: How to configure a user account to use a user profile roaming in Windows Server 2003, Windows 2000 Server, or Windows n...

  In particular, note the comment on this link:

  Use the following format for the path of the user profile:

  \\server_name\shared_folder_name\user_profile_folder_name

  For example, if you want to store the roaming user profile in a folder with the same name as the user account in a shared folder named "Profiles" on a server named "Server1", type the following path:

  \\Server1\Profiles\%username%

  However, when you use management persona (assuming that it is configured correctly), we get errors in the log of the PM:

  [0] [23/10/2013 11:23:56:0116] [RTOVPHelper! RTOTestConnection] Impossible to obtain the attributes of the profile distance: \\ourdomain.com\userpathlocation\Profile\%username%. V2, 0 x 80070002

  A test, if I change the attribute of "profile path" roaming profile of \\Server1\Profiles\%username% to \\Server1\Profiles\realusername then persona Manager no longer has a problem.

  It seems that it cannot interpret the %username% variable.

  Is this correct? Am I missing something? Anyone can shed some light on this situation?

  Thank you.

  ORIGINAL QUESTION BELOW:

  Users can use many devices and can use a physical device or virtual in any place - they are not related to an office.

  Traditionally, we use roaming profiles in our physical environment. It works well - their profile goes with them (we have some parameters of redirection).

  When the user connects to the virtual, Persona Manager is not happy. It is said: "management of Persona is disconnected - please contact the administrator '

  Check the log of the PM, the only things that stand out are:

  ....

  [0] [23/10/2013 11:23:30:0066] [RTOProcessLogonEvent] CONNECTION: opening session Set event: user: testuser, event: 0 x 278

  [0] [23/10/2013 11:23:30:0066] [RTOProcessLogon] finish event processing logon: user: testuser

  [0] [23/10/2013 11:23:30:0066] [RTOGetUserProfileInfo] user: testuser, Sid: S-1-5-21-199048513-897128045-483988704-295896

  [0] [23/10/2013 11:23:30:0066] [RTOGetUserProfileInfo] key to open user profile failed: user: testuser, 0x2

  ....

  [0] [23/10/2013 11:23:40:0224] [VMWPopulateOfflineFiles] failed open remote folder: user: testuser, Session: 1, path: \\ourdomain.com\userpathlocation\Profile\%username%. V2, 0 x 80070002

  ....

  [0] [23/10/2013 11:23:55:0710] [RTOVPHelper! RTORefreshWorker] could not create event Refresh Office: ProcessId: event 5116,: Global\RTOVPHELPER_DESKTOP_0000000000459176, 0x80070005

  ....

  [0] [23/10/2013 11:23:56:0116] [RTOVPHelper! RTOTestConnection] unable to get attributes of profile distance: \\ourdomain.com\userpathlocation\Profile\%username%. V2, 0 x 80070002

  (... indicates to other log entries between which have been omitted)

  As we use roaming profiles, the profile path, \\ourdomain.com\userpathlocation\Profile\%username%. V2, stands in the AD user object. (NOTE: it's actually \\ourdomain.com\userpathlocation\Profile\%username% so the.) V2 is added by PM/Win7).

  If I am not mistaken, 0 x 80070002 corresponds to error 2, be "the system cannot find the specified file", but there isn't. If I come home \\ourdomain.com\userpathlocation\Profile\%username%. V2 in Solution Explorer, it seems.

  It almost seems that it does not expand the environment variable %username%.

  PM group strategies are implemented in the virtual environment:

  Manage the user persona: ENABLED

  The Persona repository location: ENABLED > > > share path: VACUUM > > > the user profile path override Active Directory if configured: ENABLED

  Log file name: ENABLED > > > Local log file path: WHITE

  Repository of roaming profile is established in accordance with this article:

  VMware KB: Management of Persona does not when it is configured according to the directives of the Management Guide of view 5.0

  Someone at - it ideas? I thought that the problem is the %username% in the roaming profile path, but this should be good, it should not?

  Please let me know if you need more information.

  Hello

  I forgot to update this.

  > Support connected with VMware.

  > They have confirmed the problem.

  > Question is a candidate for the next generation of Agent (no confirmed release date).

  In the meantime, we will have to use roaming profiles in Windows, there is no workaround for the Persona Manager solution until it is resolved.

  I don't know if the variable userdomain % is resolved for you. I hope that the difficulty they have presented with determination all the variables, rather than just the %username% variable (I reported and confirmed they had the problem). I would say that you talk about VMware to confirm that all the variables will be resolved by the Persona Manager.

• Integration Quickbooks with BC online

  Hello

  I know BC will be integrated with the desktop version of Quickbooks in a certain way, but everyone was able to integrate with the online version? perhaps through API?

  In my view, there are third party systems like OneSaas out there who will do the integrations, but I'll try to find a way around it.

  Any suggestions?

  Thank you

  For non-free... I quoted this solution 2 - 3 times to customers, it is an implementation several thousands of dollars. OneSaas would be the best solution (if you're on a budget) unless he didn't fit your needs or you need more control and improve security.

• Parallax scrolling with slideshow fullscreen

  I'm building a site of Parallax, the first area of the photo, I want pictures to switch (as a slideshow full screen) for a few images before it scrolls. Is this possible?

  Hello

  With the current role of Muse, this custom is possible as slideshow change can be automatic or parchment.

  Some images before you scroll by using the widget don't work because when you insert the widget it will work when you can scroll or it would be automatic.

  You can add ask feature.

  Thank you

  Sanjit

• Integration API with the UCM 11 g

  The customer in question is the conversion of a product of IBM to Oracle UCM content management. They have their internal house applications integrated with IBM CM (some java and .net applications). Integration is mainly via an API. My question is what kind of integration features exist with Oracle UCM and what kind of an equivalent API exists that I can suggest to the customer?
  Question 1: Anyone can give me pointers on integration with the AAU?
  Question 2: How do you view Annotations? East - other product?
  Question 3: Is there an equivalent API to display the Annotations?
  
  Thanks in advance.

  794499 wrote:
  The customer in question is the conversion of a product of IBM to Oracle UCM content management. They have their internal house applications integrated with IBM CM (some java & .net applications). Integration is mainly via an API. My question is what kind of integration features exist with Oracle UCM and what kind of an equivalent API exists that I can suggest to the customer?
  Question 1: Anyone can give me pointers on integration with the AAU?

  Start with this presentation: http://www.slideshare.net/bexmex/top-10-ways-to-integrate-with-oracle-enterprise-content-management-presentation

  In a word: Java integration via RIDC and/or of the CIS, of .net using Web Services
  (details here: http://download.oracle.com/docs/cd/E17904_01/doc.1111/e10807/toc.htm)

  Question 2: How do you view Annotations? East - other product?

  Yes, it is a little. There is an application called AutoVue. A few annotations can be made in I / PM (WebCenter Imaging) and a few annotations can be made of OnTrack (will be part of WebCenter Contact). The last two belong to the WebCenter family, then I'd go with one of these suites you best.
  One bad side: you will most likely lose the existing annotations - or you would have to "migrate", which could be very difficult.

  Question 3: Is there an equivalent API to display the Annotations?

  Depending on the product, there will be the API. I guess that the options will be confused - some Java API and other web services.

  >

  Thanks in advance.