Integrating the sections content website company Eloqua substitution content through segments.

Similar Questions

• I'd like to produce consistent spacing before and after the section headings in the table of contents

  Hello

  I am trying to create a style for the entries of table of contents for the titles of the books section. I would have a little more vertical space between these securities and two other section titles or sub-section titles, like so:

  Section 1

  Paragraph 1 a

  Paragraph 1(b)

  Section 2

  Section 3

  and so on. To do this, I can easily add a space before and after the space for the section title style. The problem comes when there are two titles with no intermediaries paragraphs, such as 2 and 3 in the example above. Then, the space between these titles is double. If I set is a nonzero value space before or after the space, but not both, then the titles won't be correctly spaced in areas where it has paragraphs either below or above a section title. Does anyone know how to get a uniform spacing?

  Thanks in advance for any advice!

  Make a third style for the case where there are two titles of section together.

• How to set up two different sites with a section that has the same content?

  I have two sister sites, each a separate but related Department in a hospital. Each of these Web sites, I have a main tab called library, which has about 30 pages it contains for related health issues. The library is the exact same content on each site, but the main navigation and the header of the site is obviously different. I have been maintaining this same content on both sites (if something is changed, then I must do it twice). It is not effective, and I would like to find a way to combine them somehow. I don't have a ton of experience, but I catch pretty quickly and I basically need ideas for the best way to handle this. I considered creating a third-party site, and the Library tab on each of the other sites would take you to this new site. I also wondered if there is a way to integration of duplicate content to two different pages (perhaps with an iframe). In this way I would update the original file, and it would be updated on both sites.

  The sites also have different sizes. It is 960 pixels wide and the other is 690 because it has a sidebar that makes it smaller. How would you recommend all that I manage that? I use Dreamweaver CS6 and my pages are all HTML

  Because the sites are on separate areas, I'm not sure you can use set includes in this situation.

  Iframes would be the way to go. You just save the content iframe on one of your sites and link page to two pages.

• Alignment of the links in the sidebar to the main content sections

  In firefox I can line up the links in the sidebar to the topics in the category so that during playback of the main content of the reader is able to see the related links in the sidebar... This isn't Karmen in internet explore... also in internet explore the indent of links I don't want them too... can someone please help

  http://www.informationrequested.com/SystemsTrading.html

  Thanks for the help

  the view in browser preview shows new text and watch sidelinks page are not aligned with h2 two sections to the main content

  Why would they?  You don't design a print document.  You design a web page. As soon as someone increases the size of the text in their browser, all changes anyway.

  DOCTYPE HTML PUBLIC "-//w3c//DTD HTML 4.01 / / IN" http://www.w3.org/TR/html4/strict.dtd "> "

  my old code says

  I changed the type of document HTML 4.1 strict better cross browser. It is also much more forgiving of coding errors and easier to validate as XHTML.  Use any type of document matches your skills as a coder.

  In my view, that the problem with the links in the list behind has been resolved. At least they appear correctly for me on Win XP in 3 major browsers.

  Firefox 3

  

  Internet Explorer 6
  

  

  Safari 3.0
  

  

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  www.Alt-Web.com/
  www.Twitter.com/ALTWEB

• How to stop the ' only content secure is displayed > display content "box popping up every time I try 2 share games on fb"

  When I am playing games on facebook and send request 2 friends, a box appears at the bottom of the screen with the message "secure content is not displayed > view content". "." When I click on it there 2 stand 2 return 2 main menu of the game b4 I can send request. How can I stop this happening

  Hi Kylie.

  Assuming you're using IE, go to Tools / Internet Options / Security / custom level / scroll to the section and find the entry called "Display mixed content".  Change to activate it.  Save the modified settings and exit all tabs and Windows IE.  When you then open IE, this problem shouldn't be a problem.  If you use another browser, I'm reasonably sure their parameters have something similar, if you will not have to contact for assistance (or visit their websites and/or forums) If you don't understand yourself (or if you use FF, Chrome or Opera, post back with the exact version and I'll see if I can figure it out for you that I have installed all - but if you are not currently has it) Please get current Prime so we're using the same versions and cannot be excluded as a problem - but I think you can do very well with them, now that you know what is causing the problem and what to look for in their circles).

  I hope this helps.

  Good luck!

• I can name the html (in WebHelp output) of the FrameMaker content files?

  We are using FrameMaker 10 on Windows 7.  We use RoboHelp 9 for WebHelp.

  I work for a small software service in a large company.  We must provide our customers with context-sensitive online help.

  When we publish WebHelp, each page of the WebHelp consists of the section in FrameMaker and all the content that follows as such (in the next section).

  The way our software provides a context-sensitive online help is not by any alphanumeric code, but rather by the name of html file.

  For example, the name of the HTML file to the window "Add insurance" should be: AddInsurance.htm.

  When the user is in the Add Insurance window and press F1, the system looks in the folder help online to a file named, "AddInsurance.htm."

  Is it possible to manually assign the name of the output HTML of the header file in the source FrameMaker file?

  If so, I would be grateful for the detailed procedure.  (I was recently reacquainted with FrameMaker after a long absence.)

  Thank you!

  Tim

  Yes, you can use the topic marker name field in HR Conversion settings to specify a marker custom FM that you put where you want your FM file broken up. In the text of the marker, you can specify the file name and the title of the topic - see the TCS blog for more information.

• Re: Internet browser does not have the full content of the page

  Hello

  Have a Satellite L300 laptop. Problems with opening the pages of website. I use Vista.
  When I try to open Internet pages pages explore does not bring to the high content full screen is full of information, but the content is not.
  Say yes they is 20 items on a web page, it displays 10. tried my ISP and they told me to reset the Explorer but has not fixed they deliver siad it is something to do with the computer.

  Then a hlp with that?
  It would be great if you could.

  A BIG thank you in advance.

  To be honest I don't understand what the problem is here.
  Can you send us the screenshot?
  Is IE zoomed maybe?

• While surfing... dialogue security https sites apperas "do you want to view only the webpage content that was delivered safely?

  While surfing... Security https sites apperas to dialogue "do you want to view only the webpage content that was delivered safely. It irritates a lot. Since then, he's waiting for Yes/No. How to avoid it? Thanks and best regards yeshsoft

  Hello

  Add the e-mail to each site Page to IE - Tools - Internet Options - Security tab - Trusted Sites

  If necessary, you can then you can click on the tab Security - Sites trust - custom level and change
  parameters for sites that will be treated separately from the other Trusted Sites No. You
  can experiment if necessary as it is a default button reset it as well. Do not forget to
  APPLY / OK any changes.

  You can also get to security settings - then Trusted Sites quickly by double-clicking the blue
  Globe on the lower part of IE in the central section, where it is said - Internet | Protected mode
  on the status bar (you can double-click on any part of this article).
   
  I hope this helps. Rob - bicycle - Mark Twain said it is good.

• How to erase history of reliability report details in the section "maintenance" of the Centre?

  Original title: reliability history

  Is there a way of compensation reliability history report details in the section "maintenance" of the centre?

  Hello

  Please keep us updated.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following question:

  Why do you want to delete the contents of "the history view reliability?

  The reliability monitor has a chronology of software and hardware changes, application failures and shutdown problems.  The version of Windows 7 does not collect data using WMI (Windows Management Interface) and this explains why there is no executable file as resmon.  WMI also allows you to collect reliability data using Windows PowerShell scripts.

  How to reset the history of reliability monitor?

  Suppose you want to resume, and clear history of reliability monitor; This is how to do it:

  a. you need locate the folder of RAC, it's usually to:

  C: \ProgramData\Microsoft\RAC

  (b) to decide if you want to keep the data, if so, then copy or save the sub folders PublishedData and StateData.

  c. Select all files in the C: \ProgramData\Microsoft\RAC\PublishedData folder.  Right click and delete.

  d. repeat to C: \ProgramData\Microsoft\RAC\StateData.

  e. now that you have reset the reliability monitor, it will automatically start recording new data.

  Hope this is useful information. Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• Folder on CD moved to the section "files ready to be written to disk.

  I have several folders on a CD.  When I opened one of them to look at the contents, the folder was moved in the section "Files currently on the drive" to the section that says "ready to be written on the disc of the files.  It should not be written to disk, it is already on the CD.  How for it to be shown in the first section?

  I have Windows 7 Home edition 64-bit, with a combination CD/DVD drive.

  I suggest you copy the folder that is located in the section "Files ready to be written to the disk" in your desktop environment.

  Turn on "Show hidden files folders and drives" of Tools > Folder Options > view

  Also try C:\Users\\AppData\Local\Microsoft\Windows\Burn\Temporary Burn folder and delete the folder.

• Dynamic change in the model content?

  Hello

  I was a model email in Eloqua, but there is a problem in dynamic content. When I change the dynamic content, only half of the content is displayed.

  Help.

  Hello

  You must hav forgotten to write the css code in the css editor tools...

  Here is the code:

  ""

  Use this... it will be probably solved.

• Just failed 1z0 - 060, would be selftest exam prep 1z0-067 to be the best route to study for the section Core DBA?

  Hello

  Upgrade of 1z0-060 12 c the weekend reviewing.

  I almost spent the new features section, but not quite a few on the section s/n Basic.

  I spent probably 150-200 hours studying for the what's new section.

  Rate the new section of features through one or two questions.

  I was not on 12 c yet.

  However, I've spent hardly studied anytime for the s/n of base section.

  My strategy now is to buy the selftest 1z0-067 software to see if I can freshen up on core dba stuff.

  Thank you Roger

  
  

  However, I've spent hardly studied anytime for the s/n of base section.

  Like bigdelboy said, I consider that section Core s/n the harder of the two--largely because it is more difficult to prepare for. Several issues in this section are extremely broad.  "Solving the problems of network and database" and 'Implementation Application Tuning' in particular are ridiculously broad themes.

  That said, I don't consider any practice tests to be the place to learn the material.  In my opinion, their place in the grand scheme of things is to see if you're ready for the real exam and to diagnose where are your weaknesses * after * having prepared using other materials. The most probable resource for the Core section in my opinion would be the Oracle Press book "Manual of DBA Oracle Database 12 c" by Bob Bryla http://www.amazon.com/dp/0071798781 - something equivalent.

  This book should have broad coverage of basic skills Oracle DBA. That said - I have * not * its table of contents against the topics in the section s/n review basic recut.  I recommend you to do this before making a decision to buy the book.

• The webservice URL in connections.xml substitution

  Hello

  I started to learn the MAF Oracle recently, with the current available content in articles and documentation, I had an overview of the use of SOAP or REST services.

  We intend to achieve a business application. My question is related to the URL of webservice data control.

  When I create the Web service data control, the url is stored in connections.xml. This way I can actually work with my webservice deployed locally. but in real life, I can't know the url from the outset because it depends on the implementation and which server the services had been deployed. Considering this, how can I replace the url that is used by the MAF for data controls. What would be the typical approach that we must follow?

  Thank you

  Siva

  Siva, the solution to this is a CRG feature called "Service Configuration".  Essentially your application at startup can reach out to a remote WEBDAV server and download several files including the connections.xml file, which would contain any change in the URL.

  See the section in the dev guide: http://docs.oracle.com/middleware/mobile200/mobile/develop/maf-web-admin.htm#ADFMF23868

  CM.

• Removal and the reorganization of the files in the section of a course resources

  How can I delete a file in the section of a course of project resources? How can I rearrange the files in the resources of a project course section?

  If the answer is that I can not, please review my questions to a feature request. Thank you.

  Thanks for the question, Anna Marie. Yes, I connected a similar request myself. Here's a bit of clarity on how first manages the edition of the States to be the author of the course.

  There are essentially three States of a course, once you have completed this course.

  • PROJECT - you got to set the course and maybe even recorded, but not yet published.
  • PUBLISHED - you have published a course, and he is able-update (you can update modules)
  • RETIRED - you removed the course. You can republish a course, but it becomes only partially editable.

  In most cases, the old state allows you to edit the basics - for example. name of course, description, etc., but there are aspects of a course of retirees that cannot be changed. (IOW it refers not to the State of PROJECT.)

  Here are the things that cannot be changed in the OLD State:

  1. You cannot add a course module.
  2. You can not delete a course module.
  3. You can not re - sequence the order of the course modules
  4. You cannot change the access of navigation for the course modules
  5. You cannot change the assigned skills / skills credits
  6. You cannot change the type of registration (eg. self register, Director approved etc..)

  Perhaps more importantly, in the immediate future. You can duplicate a course and effective that return you to a State of DRAFT. The advantage is that it becomes the road to DRAFT - fully editable, without having to recreate the content. You will be able to rearrange the modules etc.  The downside is that if you have already deployed the course - and you want to data combined - you would aggregate data of the original and the new together in your reports.

  Thanks again for your comments. I'll be sure to share them with Deepak and first engineering team.

  Allen

• Do not take into account the specific content during import?

  File > place > Windows (select "Show Import Options") > customize Style Import > Style mapping... >

  [MS Word Style: title 1 > > > Style InDesign: title 1]

  Question: How do I configure the resulting "InDesign Style: title 1 ' so that the CONTENT is either:

  (1) no imported in InDesign

  (2) deleted during the import process.

  (3) completely ignored by InDesign?

  Is this possible?

  If not, is there some type of script that could handle this, and where that might be?

  Thank you.

  Go in Edition > find/replace. Let the Search and change empty fields, click on the icon next to the section to find Format (circled in red in my screenshot) and when the Parameters of Format to find window appears, select the paragraph style. If you click Search, you will find the first bit of text style with this style. Click Edit, so this will change the text to what is entered in the field of the currency , which is nothing, it will remove the text. You can use any combination of find, find next, change, change all or Change/find to control what is selected and deleted.