Integration of Golden Gate with HDFS

Similar Questions

• Web services with Golden Gate

  Hello
  How to use Web Services with Golden Gate? Is there a document for the use of Web Services with Golden Gate?
  
  Thank you
  Hiren Pandya s

  Messages are introduced into flat files, then you go on the road to flat file for loading the data.

  Messages are entered in the database, and you are regular GoldenGate-Land.

  There is no way, a message will be put directly into a trail; those are specific GG.

• Topology of Golden Gate

  Hello

  I need your help to understand the topology to use for my new setup of the Golden Gate. I need to have active replication on my 11.2.0.3 bases (2) in Linux environment but topology seems to much complex. Please help answer following questions. I have installed oracle golden gate and management available latest pack

  1. I understand that I must install Golden Gate on both servers of databases.

  2 I need to configure replication using GUI, what I have to install Director of the Golden Gate Bridge to set up the replication or there is a graphical interface with normal installation of Golden Gate, which I would install my two nodes?

  3 golden Gate Director should it merge first middle ware to install?

  4. is this average fusion dishes must also have an oracle database must be installed?

  5. can I have this door Director of gold installed on one of the server of databases or would I need on a separate server.

  6. on the Golden Gate monitor server, can I install this monitor server on the same server as the Director of Golden Gate using the same database as the Director of the Golden Gate?

  Thank you

  1. I understand that I must install Golden Gate on both servers of databases.

  -Yes, it is correct, however, it is out of available treatment. (It does not change the authorisation scheme, but it can be used to make it easier to install / implement).  Thus, you can use a connection string in the connection (such as USER name, or ASMUSER) parameters and it will connect through SQL * Net. This can be used to apply data remotely.  In the case of the snippet, you can use the mode of ALO in out area treatment, or you could use a Capture integrated downstream.

  2 I need to configure replication using GUI, what I have to install Director of the Golden Gate Bridge to set up the replication or there is a graphical interface with normal installation of Golden Gate, which I would install my two nodes?

  -This is part of the directory, Yes, that is part of the Oracle GoldenGate Management Pack.

  3 golden Gate Director should it merge first middle ware to install?

  -Now just webcenter and a data base for its small repository.

  4. is this average fusion dishes must also have an oracle database must be installed?

  -It can be Oracle, MySQL or even SQL Server.

  5. can I have this door Director of gold installed on one of the server of databases or would I need on a separate server.

  -It can be the source or target, or separated. There is no requirement that is difficult for the location of the repository.

  6. on the Golden Gate monitor server, can I install this monitor server on the same server as the Director of Golden Gate using the same database as the Director of the Golden Gate?

  -Yes, and he can use the same server database repository.

  Nick

• Problem in the replication of Golden Gate

  Hello
  
  When I start services is however getting error below...
  
  2012-03-28 11:54:35 GGS WARNING 109 Oracle GoldenGate for Oracle delivery, rpripor.prm: no unique key is defined for the table GR_DATAREPAIR_LASTSYNC_DETAIL. All viable columns will be used to represent the key, but cannot guarantee the uniqueness. KEYCOLS can be used to set the key.
  ' 2012-03-28 11:54:36 218 Oracle GoldenGate for Oracle delivery WARNING GGS, rpripor.prm: aborted transactions grouped on ' GES1_OWNER. GR_DATAREPAIR_LASTSYNC_DETAIL', database error 25128 (ORA-25128: no insert/update / delete on the table with the constraint (GES1_OWNER.) SYS_C0011163) disabled and validated).
  2012-03-28 11:54:36 218 Oracle GoldenGate for Oracle delivery WARNING GGS, rpripor.prm: repositioning of EBR 755918 in seqno 5.
  2012-03-28 11:54:52 218 WARNING GGS Oracle GoldenGate for Oracle delivery, rpripor.prm: mapping 25128 error SQL CAAA. GR_DATAREPAIR_LASTSYNC_DETAIL to GES1_OWNER. GR_DATAREPAIR_LASTSYNC_DETAIL error ORA-25128 OIC: no insert/update / delete on the table with the constraint (GES1_OWNER. SYS_C0011163) disabled and validated (status = 25128), SQL < INSERT INTO 'GES1_OWNER '. "' GR_DATAREPAIR_LASTSYNC_DETAIL ' ('REPAIRKEY', 'LASTSYNCID', 'TABLENAME',"PARAMNAMES","PARAMVALUES", 'WHERECLAUSE', 'CREATED_DATE', 'ROWS_UPDATED_IN_SOURCE', 'ORDERSEQ',"APPNAME"," OF >. ")
  2012-03-28 11:54:52 218 WARNING GGS Oracle GoldenGate for Oracle delivery, rpripor.prm: repositioning of EBR 755918 in seqno 5.

  Salvation;

  "" For your question, I suggest farm your thread here that change the status of the thread to answered and move it to Forum Home "management system and integration ' GoldenGate is Golden Gate dedicated forum site.

  Respect of
  HELIOS

• Golden gate Oracle compatibility

  Hello
  
  We are trying to decide on the use of the Golden Gate in our project, but I was not able to determine if our database and operating system is compatible and supported.
  
  We have IBM DB2 UDB v.8 with Z/OS 1.11
  
  I downloaded the Certification Matrix (http://www.oracle.com/technetwork/middleware/data-integration/goldengate1111-cert-matrix-349179.xls) and I have not seen any version of Z/OS, but I saw a few presentations that say that OGG can work in a Z/OS with DB2.
  
  ¿Anybody can help me to find information?
  Thanks in advance.

  Hello

  1.
  DB environment: IBM DB2 UDB v.8 with Z/OS 1.11

  Oracle GoldenGate is ceritifed for use with DB2 on z/OS 1.11 8.1. You can download below mentioned either the OGG edelivery.oracle.com software and can install and configure and use for replication of data to homogeneous or hetrogenous environments.

  a. Oracle GoldenGate V11.1.1.0.0 for DB2 8.1/9.1 64 bit on zOS 1.08/1.09/1.10/1.11
  Package/Zip name: V22309-01
  Construct the name: ggs_zOSV1R6_UDB81_32bit_v11_1_1_0_0_078

  OR

  b.Oracle GoldenGate V10.4.0.x for DB2 8.1/8.2 64 bit on zOS 1.06/1.07/1.08/1.09
  Package/Zip name: V18173-01
  Construct the name: ggs_zOSV1R6_UDB81_32bit_v10.4.0.19_002

  Both versions are certified for use with DB2 v8.1 on z/OS 1.11

  2.
  Installation guide for DB2 z/OS and OGG can be downloaded at the bottom of the link.
  http://download.Oracle.com/docs/CD/E18101_01/doc.1111e17796.pdf

  Other OGG documentation can be downloaded at the bottom of the link.
  http://download.Oracle.com/docs/CD/E18101_01/index.htm

  Thank you & best regards
  SK

• Golden Gate 12 c on Windows 8

  Hello

  I download and installed this version GG (12.1.2.1.0) on a laptop Windows 8.

  Version 12.1.2.1.0 OGGCORE_12.1.2.1.0_PLATFORMS_140920.0203

  Windows x 64 (optimized), Oracle 12 c on September 20, 2014 14:21:36

  My version of db is 11.2.0.4 and I am able to start the process of Bishop and this command, open a window with the journal of Bishop, like the previous version of GG (11), but when I try to start an extraction process, not nothing happens and doesn't generate any newspaper or info on ggserr.log or dirrpt for the extraction process.

  This is the info on mgr.log

  ***********************************************************************

  Oracle GoldenGate Manager for Oracle

  Version 12.1.2.1.0 OGGCORE_12.1.2.1.0_PLATFORMS_140920.0203

  Windows x 64 (optimized), Oracle 12 c on September 20, 2014 14:21:36

  Copyright (C) 1995, 2014, Oracle and/or its affiliates. All rights reserved.

  From 2014-11-22 16:13:01

  ***********************************************************************

  Version of the operating system:

  Microsoft Windows 8 on x 64

  Version 6.2 (Build 9200)

  Process ID: 13764

  Parameters of...

  port 30000

  purgeoldextracts. / dirdat / *, usecheckpoints

  dynamicportlist 30010-30100

  Extracted comment to start automatic extwest

  Comment excerpt Autostart pwest

  Comment by AutoRestart extract *, WaitMinutes 1, try again 30

  Comment 1 of LagReportHours

  Comment by LagInfoMinutes 30

  Comment LagCriticalMinutes 45

  ***********************************************************************

  * Run time Messages *.

  ***********************************************************************

  2014-11-22 16:13:01 INFO OGG-00983 Manager began (port 30000).

  2014-11-22 16:13:12 received GGSCI 00963-OGG-INFO command on the host [FE80::B18E:58FE:580 D: 61 C 2]: 54033 (EXTRACT REPLICA1 START).

  2014-11-22 16:13:12 INFO OGG - 00975 EXTRACT REPLICA1 begins.

  2014-11-22 16:19:18 received GGSCI 00963-OGG-INFO command on the host [FE80::B18E:58FE:580 D: 61 C 2]: 54159 (EXTRACT REPLICA1 START).

  2014-11-22 16:19:18 INFO OGG - 00975 EXTRACT REPLICA1 begins.

  And the info all the

  GGSCI (ag-acer) 15 > news

  Program status group Lag time since Chkpt Chkpt

  MANAGER RUNNING

  EXTRACT DECREE PREP1 00:00:00 25:03:39

  EXTRACT DECREE REPLICA1 00:00:00 25:03:41

  No idea how to fix this?

  Thank you very much

  Arturo

  Hello

  I couldn't test the editing that you said about the specification of access roads. I installed the version 12 c database and it worked correctly with the previous railways.

  Now, I have GG 12 c 12 c Oracle database replication on a Linux machine with the same configuration on top and work very well.

  In theory, Golden Gate supports Oracle Database 11 g, version 12 c GG installing install says that this version of BD (11.2.0.4) are not supported. Of the other certification matrix Oracle only supports 12 GG:

  Microsoft Windows x 64 (64-bit) 2008 R2 Service Pack Microsoft Windows 0 + and x 64 (64-bit) 2012 Service Pack 0 +, nothing about Windows 8.

  I also found a difference between GG for Windows and Linux installers. Under linux, the Installer gives us the ability to install version 11 of GG or 1no Windows.

  In short, we believe that these are things of the platform.

  Thank you

  Arturo

• What are the consequences of the change of password for the admin user in golden gate?

  Hello

  I just picked up during surgery and allows us to replicate door data of gold. Unfortunately, the password for the user that has been created in the database for the Golden Gate has been lost.

  At the present time, processes are added and I was trying to connect but it fails with name of user and password invalid.

  I want to change it. Do I need to apply this new password anywhere after changing?

  Thank you

  Hello

  Not a lot of consequences, if you have changed the password where you had used.

  1. you must change the password of user goldengate in parameter files where ever you had mentioned, as the extract file etc..,.

  2. If you used the password encrypted, you must re-create the encryption password.

  3. If you used a user Alias id, then you must change this too.

  Kind regards

  Veera

• Golden Gate on SSH - Portfolio Manager

  Hi all

  I have a very specific need. I did mostly all my replication within the same company & VPN.

  However, I have 2 clients who both use the same application and they would like to replicate data between them. Obvious that they want to do this as secure as possible from its sensitive data.

  My first instinct is Oracle Wallet Manager? As Golden Gate already can already use the TNSNAMES for its connection information, I thought this might be the best approach.

  I was wondering if someone could advise others. Any document an example of how to configure the Portfolio Manager for the Golden Gate.

  Sincerely

  Jan S.

  Jan,

  During the transfer of data between a source and a remote system, GoldenGate employs a TCP/IP communication. Data can be encrypted during transport or in the file of the track itself. Oracle GoldenGate Win/Unix administration Guide includes a section on the Oracle GoldenGate Security configuration:

  http://docs.Oracle.com/CD/E35209_01/doc.1121/e35957.PDF

  There are also the steps documented to use Oracle security with the extraction process in the following article of knowledge:

  Security Oracle GoldenGate and configuration (Doc ID 1461898.1)

  Let me know if this does not answer your question.

  Best regards

  Mary

• How Golden Gate will use change data Capture (CDC) in SQLserver2008R2

  How Golden Gate will use change data Capture (CDC) in SQL server 2008 R2. How much space it will occupy for each table when it erases the data and what will be the retention period for the tables of the CDC.

  So, here's what happens next. Normally, when a tranlog backup occurs, SQL Server may decide to release the tranlog space after the backup of the log, for transactions that have been committed and saved.

  When you activate a form any replication, like with OGG and allowing TRANDATA, you need to eat this truncation periodically. So with your configuration, even if the log backup occurs over 15 minutes, data in the journal are not allowed to be released after the log backup until the log backup that occurs after the 4th consecutive time of work.

  It is fine if you are not concerned about the lack of free newspaper in 4 hours. Just something to keep in mind.

• Golden Gate can be used to create a 3rd node?

  We are currently running flows and determine if the Golden Gate Bridge is worth going to. We have a present master in master. Golden Gate can easily be used to create a third master? If I had an empty schema on site 3, can I use datapump to sync it? Does anyone have experience with this, or it's documented anywhere?
  
  Thank you.

  You can do the installation, given that the data are large enough volume, using Data Pump or transportable tablespaces will be faster than the initial load using GoldenGate. Download caught up target (so for you make the instantiation and loading data, you use extracts on the source, and then these trails can be applied to get the target caught up). When you're all in sync, you now have master 1 and the database target of GoldenGate as your master-master. It must also take into account what the two-way replication, so a part of the work will be put in place of the extract, datapump (GoldenGate) (same name, wish that could turn one of these days) and replicate. Also, you do the DDL replication?

  Another factor to consider is the cost. Water is free, GoldenGate is not (by far). But, GoldenGate is much easier to use. But if stream works very well, what is your return on investment on passage? If you were from scratch and had the funds, I'd go with GoldenGate. Otherwise, you really have to sell people on why spend a significant amount of money is worth TI/better than what you have now, in my humble OPINION.

• Good boot sequence of processes in Golden Gate

  Golden Gate version: 11.2.1.0.3
  DB version: 11.2.0.3 (Oracle for Oracle replication)
  Platform: RHEL 5.4
  
  We have a very basic replication requirement.
  
  Use of GoldenGate we must replicate the LMD to 9 tables (Uni-directonal) source to target. The two DBs running different physical servers.
  
  Is the right sequence of boot process?
  

  Step0. For initial load, I use exdp/impd of the tables from source to target. Now we the relevant tables in Source and Target in Sync
  
  Step1. Start Manager process in Source server
  
  Step2. Start Manager process in Target server (with DYNAMICPORTLIST )
  
  Step3. Start  PUMP process (secondary extract) in Source
            From googling, I gather that Pump process in souce can be started only after starting the manager process in Target.
            
            GGSCI (kepler121) 18> view param pump
            
            extract pump
            passthru
            rmthost 10.80.16.125, mgrport 7809
            rmttrail /u01/GG/11.2.1.0.3/dirdat/rt
            table scott.* ;
  
  Step4. Start the primary Extract process in Source
       
       -- Adding local trail
       ggsci > add extract pump , exttrailsource /u04/ggs_data/dirdat/yp
       
       --- Adding remote trail
       add rmttrail /u01/GG/11.2.1.0.3/dirdat/rt, extract pump
  
  Step5. Start the REPLICAT process in Target 

  Just for you remember, this issue is not on the complete steps in the configuration of GG. I just want to know the correct sequence in which processes in the Source and target must be started.
  
  Published by: GarryB on 26 December 2012 06:17

  The correct sequence will be

  Step0. For the initial charge, use PPC/experimental tables from source to the target. Now the relevant tables in Source and target are synchronized

  However, please note that after step 0, you can be sure that the two DBs are synchronized
  If there is no activity of the application passes to the source that could have
  Insert additional data that might have been missed by the export utility.

  Step 1. Process of the boot to the Source Server Manager

  Step 2. Start the process to the Server Manager target (with DYNAMICPORTLIST)

  Step 3. Start the primary Source extraction process

  Step 4. Launch of PUMP (excerpt from secondary school) in the Source

  Step 5. Start REPLICAT process in target

  Published by: Saran on January 2, 2013 08:56

• Implementation of the Golden Gate

  Hello
  
  
  How long does a Golden Gate type implementation project take?
  
  
  Thank you and best regards,
  SK

  In a simple type like situation, with people who know the product, it could be as short as a few hours. A lot depends on how you know your application...

  I can download the product, set up a replication of a database to another on the empty tables in ten minutes as said the previous person. I saw some active scenarios (with 10 + knots) take a few months to set up, test, retest, reconfigure, test and implement.

• Data Guard Vs Golden Gate

  Hello
  
  I have custody-transfer data disaster and now my planning to do more to implement the Golden Gate. My question is when you can protect your data and active pressure on the primary database using the Data Guard why someone should go to golden gate?
  
  Please let us know of your experience of Golden Gate on Data guard!
  
  One more thing, what is meant when someone using eve of terms and dataguard, dataguard active? Are not all the same?

  I have data-guard for disaster recovery and now my management planning to do more like implement Golden gate. My question is when you can protect your data and offload pressure on primary database by maintaining active data-guard why someone need to go for golden gate?? 
  
  Please share your experience for using Golden Gate over Data guard!!
  

  Refer to this http://www.oracle.com/technetwork/database/features/availability/dataguardgoldengate-096557.html
  Can be useful

  One more thing, what is meant when someone using eve of terms and dataguard, dataguard active? Are not all the same?

  Active Dataguard is a device in which the database pending would be placed in open read-only mode and recovery (MRP/application log) would be ongoing. This is called as active dataguard and the wait would be in sync with the primary. The standby database when kept in open read-only mode can be used for purposes execute select queries. So, you would be having a function of the use of the database as a database, and at the same time the day before would apply the primary newspapers. This feature is available only from 11 g.

  In 10g or earlier versions, we had no such device. The database of rescue, if necessary use for reporting purposes, then the backup database must be open in read-only mode, but the recovery (MRP/application log) cannot be done. So, if you want that database waiting to have the application of fact log, then he must place in EDITING mode. If it will be used for the purposes of tax, then it must be placed in open READ ONLY mode and stop the recovery. Guests receive only 1 device at a time here.

• Golden Gate a Table of Siebel Oracle replication

  Hi all
  GG version 11.1.1.1
  the Oracle source: 9.2.0.6
  Oracle target: 10.2.0.4
  
  We intend to implement Oracle Golden Gate for replication in real-time for Siebel database (source).
  so, I have a few questions before implementing it.
  (1) allow to say my name of the table is S_ASSET and have 290 columns and require only 100 columns in target database, so it is possible to replicate?
  (2) for the first charge, I creates a target with 100 columns table, and then will do the full replication of the table (100 columns) via INSERT add link DB... in this case
  Let say my source table is to have 100 records, so I reproduced all the 100 records from the source to the target link db as initial charge... so now I'll start my extracted processs... .so how GG knows he should choose among 101 record...? or we need to talk about any parameter explicitly... ?
  
  For the initial charge, we expect export/import or insert Add... so after the initial load, how gg knows next record to pick up... ???
  (3) if I want to play my source to destination data replicaition every 2 hours once... then how to talk about this lag...?
  
  Can some one please help me...
  Thank you very much
  KVM

  Basically. The four steps in various locations include:

  1. prepare the environment
  2 configure the modified capture (excerpt), which can be started if simultaneous DML will take place during the initial load; otherwise you can start after load
  3. perform the loading initial, so while takes place, your snippet is the capture of changes, those who will be expected to apply
  4 set up the discount of the change (replicate), which includes the start

  If you have changes during the initial loading window / calendar, consider using the HANDLECOLLISIONS parameter.

• Oracle Golden Gate fail to start extract and reproduce the process

  Hello
  
  I am trying to set up Golden Gate, but I'm running into the following errors during Setup. Any help is appreciated. Below is the content of the configuration.
  
  Thank you
  JT
  
  ggssci > edit params mgr
  PORT 7809
  Ggs_owner username, PASSWORD ggs_owner
  PURGEOLDEXTRACTS/u01/app/oracle/ggs/dirdat/ex, USECHECKPOINTS
  
  ggsci > edit params ext1
  -extract the Group-
  extract ext1
  -connection to the database.
  ggs_owner username, password ggs_owner
  -hostname and port for trail-
  rmthost 192.168.2.111, mgrport 7809
  -path and trail name.
  rmttrail/u01/app/oracle/ggs/dirdat/lt
  Support - DDL
  DDL INCLUDE ALL
  DDL are mapped objname SCOTT.*;
  -DML
  table SCOTT.*;
  table SCOTT. EMP;
  table SCOTT. DEPT;
  table SCOTT. SALGRADE;
  table SCOTT. BONUS;
  
  
  GGSCI (ggsrc.localdomain) 12 > view report ext1
  
  
  ***********************************************************************
  Oracle GoldenGate Capture for Oracle
  Version 11.1.1.1 OGGCORE_11.1.1_PLATFORMS_110421.2040
  Linux, x 86, 32-bit (optimized), Oracle 11 g on April 30, 2011 22:35:14
  
  Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
  
  
  From 2011-08-18 14:17:50
  ***********************************************************************
  
  Version of the operating system:
  Linux
  Version #1 SMP Thu Mar 15 19:57:35 EDT 2007, exit 2.6.18 - 8.el5
  Node: ggsrc.localdomain
  Machine: i686
  limit software
  Address space size: unlimited unlimited
  Heap size: unlimited unlimited
  File size: unlimited unlimited
  Time CPU: unlimited unlimited
  
  Process ID: 3408
  
  Description:
  
  ***********************************************************************
  * In the course of a run with the following parameters *.
  ***********************************************************************
  -extract the Group-
  
  Context of the source:
  SourceModule: [er.main]
  SourceID: [/ scratch/sganti/view_storage/sganti_core_lin32/oggc]
  ore/OpenSys/src/app/er/rep.c]
  SourceFunction: [get_infile_params]
  SourceLine: [12245]
  ThreadBacktrace: [7] elements
  : [/ u01/app/oracle/ggs/extract (CMessageContext::AddThr]
  [eadContext () + 0 x 26) [0 x 8289366]]
  : [/ u01/app/oracle/ggs/extract (CMessageFactory::Create]
  (Message (CSourceContext *, unsigned int,...) + 0 x 817) [0x827fae7]]
  : [/ u01/app/oracle/ggs/extract (_MSG_ERR_STARTUP_PARAME]
  RROR_ERRORTEXT (CSourceContext *, const char *, CMessageFactory::MessageDisposition)
  [() + 0 x 81) [0x822fc81]]
  : [u01/app/oracle/ggs/extract [0x814e4c4]]
  : [u01/app/oracle/ggs/extract(main+0x1dc) [0x81529cc]
  ]
  : [lib/libc.so.6(__libc_start_main+0xdc) [0xa0adec]]
  : [/ u01/app/oracle/ggs/extract(__gxx_personality_v0+0x)]
  1C5) [0 x 8120491]]
  
  2011-08-18 14:17:50 parameter ERROR-OGG-00303 unrecognized (-excerpt).
  
  2011-08-18 14:17:50 ERROR OGG-01668 PROCESS ABENDING.
  
  
  GGSCI (ggsrc.localdomain) 15 > news
  
  Lag time since Chkpt program status group
  
  MANAGER RUNNING
  EXTRACT STOPPED EXT1 00:00:00 00:07:32
  
  
  
  GGSCI (ggtrgt.localdomain) 2 > Info
  
  Lag time since Chkpt program status group
  
  MANAGER RUNNING
  REPLICAT REP1 00:00:00 BY-LAW 00:10:23
  
  
  GGSCI (ggtrgt.localdomain) 3 > start replicat rep1
  
  Sending START request manager of...
  REPLICAT REP1 from
  
  
  GGSCI (ggtrgt.localdomain) 4 > news
  
  Lag time since Chkpt program status group
  
  MANAGER RUNNING
  REPLICAT REP1 00:00:00 BY-LAW 00:15:22
  
  
  GGSCI (ggtrgt.localdomain) 5 > view report rep1
  
  
  ***********************************************************************
  Oracle GoldenGate for Oracle delivery
  Version 11.1.1.1 OGGCORE_11.1.1_PLATFORMS_110421.2040
  Linux, x 86, 32-bit (optimized), Oracle 11 g on April 30, 2011 22:40:44
  
  Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
  
  
  From 2011-08-18 14:22:08
  ***********************************************************************
  
  Version of the operating system:
  Linux
  Version #1 SMP Thu Mar 15 19:57:35 EDT 2007, exit 2.6.18 - 8.el5
  Node: ggtrgt.localdomain
  Machine: i686
  limit software
  Address space size: unlimited unlimited
  Heap size: unlimited unlimited
  File size: unlimited unlimited
  Time CPU: unlimited unlimited
  
  Process ID: 4095
  
  Description:
  
  ***********************************************************************
  * In the course of a run with the following parameters *.
  ***********************************************************************
  -connection to database target-
  
  Context of the source:
  SourceModule: [ggdb.ora.db]
  SourceID: [/ scratch/sganti/view_storage/sganti_core_lin32/oggc]
  ore/OpenSys/src/gglib/ggdbora/dboci.c]
  SourceFunction: [odbc_param]
  SourceLine: [1220]
  ThreadBacktrace: [8] elements
  : [/ u01/app/oracle/ggs/replicat (CMessageContext::AddTh]
  [readContext () + 0 x 26) [0x820fa26]]
  : [/ u01/app/oracle/ggs/replicat (CMessageFactory::Creat]
  (eMessage (CSourceContext *, unsigned int,...) + 0 x 817) [0x82061a7]]
  : [/ u01/app/oracle/ggs/replicat (_MSG_ERR_STARTUP_PARAM]
  _UNRECOGNIZED (CSourceContext *, const char *, CMessageFactory::MessageDisposition)
  (+0x7E) [0x81a7b6e]]
  : [/ u01/app/oracle/ggs/replicat (odbc_param (char *, char))]
  [*) + 0xc25) [0 x 8182475]]
  : [u01/app/oracle/ggs/replicat [0x812ec26]]
  : [/ u01/app/oracle/ggs/replicat(main+0x1a1) [0x8135bb1]
  ]]
  : [lib/libc.so.6(__libc_start_main+0xdc) [0x71a1dec]]
  : [/ u01/app/oracle/ggs/replicat(__gxx_personality_v0+0)]
  x1b5) [0 x 8112991]]
  
  2011-08-18 14:22:08 parameter ERROR-OGG-00014 unrecognized:-target. PARAMETERS
  amplifier could be misspelled or not supported.
  
  2011-08-18 14:22:08 ERROR OGG-01668 PROCESS ABENDING.
  
  
  GGSCI (ggtrgt.localdomain) 6 >

  Commented lines are two hyphens, not one.

  Also, if you use scott.star, so why the list of other tables that would already be included by wildcards?