Integration of Google map with Map Viewer does not work

Similar Questions

• How can I get the serial number for update for first pro cs4 4.2.1, one provided with the product does not work.

  How can I get the serial number for update for first pro cs4 4.2.1, one provided with the product does not work?

  You don't need a serial nr for updating a program

  You need the original CS4.0. install and add the series nr. to get the program to work.

  Now you can update to 4.2.1

• the default PDF Viewer does not work

  I understand that Firefox has a default PDF Viewer, but it does not work on my Mac OS 10.6.8. When I click on a pdf document, nothing happens.

  When you click on a link to a PDF file, you get a blank page or a black background with an empty progress bar, or you get absolutely nothing?

  Can you try to change your setting as described in the following article to launch the PDF outside Firefox and see if that works? After this test, you can change it back and repeat the internal viewer. How to disable the built-in PDF Viewer and use another Viewer

  A little luck?

• Windows Photo Viewer does not work when photo is clicked on

  When I click on the individual image in the folder, the first message received error is 'there was a problem starting D:\Program Files\Windows Photo Viewer\PhotoViewer.dll. The specified module could not be found.

  Windows 7 is installed in C:\ and D:\had the old XP Professional which I've updated.

  Slide show does not work either.

  However, I can say 'Open with' and select the Windows Photo Viewer to view the photo. Photos of the record may be consulted by clicking on 'Next' and 'Previous', but not when you click on individually

  Any help is appreciated.

  Best,

  Mahesh

  Syed,

  Thanks for the reply. I had to reinstall Windows 7 on my machine. It corrects the problem.

  However, it caused another :). Now my camera Canon A710IS unrecognized despite getting all the latest updates. Any help will be appreciated.

  Thank you

  Mahesh

• Dose of Windows Photo Viewer does not work! Why?

  My local disk C: / was full, so I moved my default folder for programs install on my E: /. Then the folder of the Windows Photo Viewer and others have been moved automatically to the new folder. And now my windows photo viewer will not work. I don't know exactly when he stopped work because I don't use very often, but it's after I've changed the default folder. Now of poliovirus Sauvage just dose not load. I opened image, it loads and dose not open anything.  I have install Picasa because I thought that I can't use the wild poliovirus. But the dose of Picasa is not working too. It makes a black image and a unknown title. Is there a way to fix this without a computer preinstallation mt. Thank you. I'm really sory for mistakes and the gramer, but I'm not talking about English country.

  Hello

  How have you changed to E:\ program files folder location?

  Microsoft does not support changing the location of the Program Files folder by modifying the ProgramFilesDir registry value

  Reference: http://support.microsoft.com/kb/933700

  Note: The link above applies to Windows 7.

  Registry warning:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the link below to follow the steps to back up registry:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope the above information is helpful.

• Help with Live View - links not working not

  Hello

  I'm having a problem with Live View.  It worked very well, until recently.  Now, when I load a site stored locally, the page seems normal and links, highlight when I cursor over them, but when I click on them no navigation takes place.  I'm staying right on the index page.  The site tests fine in IE8, Chrome, Firefox and used to test properly in Live View mode.  The same thing happens with all my sites.  No changes have been made to my system.  Maybe I've changed a setting without knowing?  Y at - it a parameter type that I'm missing maybe?  Any help would be appreciated.

  Jason

  roc383 wrote:

  I'm having a problem with Live View.  It worked very well, until recently.  Now, when I load a site stored locally, the page seems normal and links, highlight when I cursor over them, but when I click on them no navigation takes place.  I'm staying right on the index page.

  This is what is supposed to happen. Live View mode does not support the navigation to other pages. See http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WS0459F349-E2DC-4d31-ADCF-F954B79D9A77. html.

• WITH query Clause does not work in Oracle reports.

  Hi gurus,
  
  I use a query WITH clause and want to create a report by using the same query.
  
  But when I am trying to build a report, request gives error like "WITH clause table or view does not exist.
  
  But the same query works perfectly in line of sql.
  
  Does support the Oracle WITH clause query reports?
  
  Please suggest.
  
  
  Thank you
  Onkar

  I met a similar problem before and worked around it by moving the query to a pipeline function in the database as described in the unexpected CLAUSE causes ORA-00942 in Report Builder

  I hope this helps.

• Games used with Windows XP does not work

  Can I install XP on the same computer with 7?

  Games will not work on windows 7... It was the biggest reason outside the Office that I bought the new computer... now my games does not work...

  These are your options to get a game like work on Windows 7.

  If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, you cannot run Windows XP mode, but you can try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other 3rd party software virtualization and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  Thank you

  Marilyn

• MS Paint "fill with color" tool does not work. :(

  In the painting, my "fill with color" tool (the pouring paint can) does not work. I click on the box, I click on a different color, the icon changes to the can, but when I click on a space as say an empty circle, it doesn't do anything. Right click, nothing, left click, nothing.

  I noticed that the only thing he is able to do is to change a solid color that I did (as a solid black rectangle) in a different color, but only once. If I rectangle black color green, I can't change it to any other color after. I don't know what is happening.

  I am not edit a photo or anything btw, I start a new painting from scratch file. I'm trying just to circles of color and enclosed spaces. I've done this dozens of times with no problems. I tried restarting the computer and paint without effect.

  Thanks for any help!

  In the painting, my "fill with color" tool (the pouring paint can) does not work. I click on the box, I click on a different color, the icon changes to the can, but when I click on a space as say an empty circle, it doesn't do anything. Right click, nothing, left click, nothing.

  I noticed that the only thing he is able to do is to change a solid color that I did (as a solid black rectangle) in a different color, but only once. If I rectangle black color green, I can't change it to any other color after. I don't know what is happening.

  I am not edit a photo or anything btw, I start a new painting from scratch file. I'm trying just to circles of color and enclosed spaces. I've done this dozens of times with no problems. I tried restarting the computer and paint without effect.

  Thanks for any help!

  Hé salés

  try to run the sfc/scannow command. to repair the corrupted system files

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Walter, the time zone traveller

• Problem with BearPaw 2400CU Plus Scanner with Win7 Scanner does not work properly

  BearPaw 2400CU more does not work with Win7

  Yes I did, but it has not solved the problem

• BEFORE the UPDATE of relaxation with time stamp does not work as expected

  We have a scenario where I check update operations on a table.

  I created a before update TRIGGER, so that every time he goes an update on the main table statement, one before the image of the lines is captured in the table of audit with timestamp.

  Since it is before updating, ideally the audit table timestamp (TRG_INS_TMST) should be less main table timestamp (IBMSNAP_LOGMARKER) VALUE, I mean TRIGGER should happen before the update.

  (I could understand in a way that the UPDATE statement is formulated with SYSTIMESTAMP earlier before the TRIGGER is evaluated and so UPDATE is to have a time stamp prior to TRIGGER, but this isn't what we wanted. We want PRIOR update)

  'Table' IBM_SNAPOPERATION IBM_SNAPLOGMARKER            
  ---- ----------------- -------------------------------
  T1   U                 13-OCT-15 03.07.01.775236 AM   <<---------- This is the main table, This should have the latest timestamp
  T2   I                 13-OCT-15 03.07.01.775953 AM
  

  Here is my test case.

  DELETE FROM TEST_TRIGGER_1;
  
  DELETE FROM TEST_TRIGGER_2;
  
  SELECT 'T1', ibm_snapoperation, ibm_snaplogmarker FROM TEST_TRIGGER_1
  UNION
  SELECT 'T2', ibm_snapoperation, TRG_INS_TMST FROM TEST_TRIGGER_2;
  
  INSERT INTO TEST_TRIGGER_1 (ID,ibm_snapoperation, ibm_snaplogmarker)
       VALUES (1, 'I', SYSTIMESTAMP);
  
  COMMIT;
  
  SELECT 'T1', ibm_snapoperation, ibm_snaplogmarker FROM TEST_TRIGGER_1
  UNION
  SELECT 'T2', ibm_snapoperation, TRG_INS_TMST FROM TEST_TRIGGER_2;
  
  UPDATE TEST_TRIGGER_1
     SET IBM_SNAPOPERATION = 'U', ibm_snaplogmarker = SYSTIMESTAMP;
  
  COMMIT;
  
  SELECT 'T1', ibm_snapoperation, ibm_snaplogmarker FROM TEST_TRIGGER_1
  UNION
  SELECT 'T2', ibm_snapoperation, TRG_INS_TMST FROM TEST_TRIGGER_2;
  

  Def trigger:

  CREATE OR REPLACE TRIGGER etl_dbo.TEST_TRIGGER_1_TRG BEFORE UPDATE OF IBM_SNAPOPERATION
  ON TEST_TRIGGER_1 REFERENCING OLD AS OLD NEW AS NEW
  FOR EACH ROW
  WHEN (
  NEW.IBM_SNAPOPERATION= 'U'
        )
  DECLARE
  V_SQLCODE  VARCHAR2(3000);
  --PRAGMA AUTONOMOUS_TRANSACTION;
  BEGIN
  INSERT INTO etl_dbo.TEST_TRIGGER_2
  (ID,
  IBM_SNAPOPERATION,
  IBM_SNAPLOGMARKER,
  TRG_INS_TMST
  )
  VALUES (:OLD.ID,:OLD.IBM_SNAPOPERATION,:OLD.IBM_SNAPLOGMARKER,SYSTIMESTAMP)
  ;
  --COMMIT;
  END;
  /
  

  Output is something like this

  1 row deleted.
  1 row deleted.
  no rows selected.
  1 row created.
  Commit complete.
  
  'T1' IBM_SNAPOPERATION IBM_SNAPLOGMARKER            
  ---- ----------------- -------------------------------
  T1   I                 13-OCT-15 03.07.00.927546 AM 
  1 row selected.
  1 row updated.
  Commit complete.
  
  'T1' IBM_SNAPOPERATION IBM_SNAPLOGMARKER            
  ---- ----------------- -------------------------------
  T1   U                 13-OCT-15 03.07.01.775236 AM   <<---------- This is the main table, This should have the latest timestamp
  T2   I                 13-OCT-15 03.07.01.775953 AM 
  
  2 rows selected.
  

  But for some reason, even after the creation of the 'AFTER' trigger for update, it works as expected. Sense - the main table is not having the last timestamp given

  It's OKAY - I told you in my reply earlier. Reread my answer.

  could understand somehow that the UPDATE statement is made with earlier

  SYSTIMESTAMP until the TRIGGER is assessed and updated so is to have

  time stamp prior to the trigger, but this isn't what we wanted. We want to

  BEFORE the update)

  As I told you before that your UPDATE statement occurs BEFORE the trigger is activated.

  Despite what the other speakers have said, it makes NO DIFFERENCE if you use a BEFORE UPDATE or an AFTER UPDATE trigger. Your UPDATE statement runs ALWAYS BEFORE the trigger.

  HE has TO - it's your update processing statement that causes the trigger to fire.

  Your update statement includes SYSTIMESTAMP. If during the processing of your return to update the value of SYSTIMESTAMP "at this exact time" is captured.

  Then your trigger is activated and starts to run. ANY reference to SYSTIMESTAMP that you use in your trigger cannot be earlier than the value of until the trigger was executed. It's IMPOSSIBLE.

  The trigger can use the SAME value by referencing: NEW and the column name you store the value. Or the trigger can get its own value that your code is doing.

  But the SYSTIMESTAMP value in the trigger will NEVER earlier than the value in your query.

  And none of these values can actually be used to tell when the changes are really ENGAGED since the trigger does not work and CAN NOT, to know when, or if, a validation occurs.

  Reread my first answer - he explains all this.

• Sampling of colors with the eyedropper does not work.

  In Lightroom CC, I create a graduated filter. I want to give it a color, if I click in the gray box, which shows the colorpicker. I understand that you can pitch a color of the picture by clicking the box with the colors, then hold and go to the photo and release the mouse button, LR will choose this color. This does not work with me. If I click on the mouse button and let the color box, the slider in the color box drops to zero saturation and does not move with the colors of my photo I'm going with my pipette. It does not pick up the color.

  Same problem here! Selector is not looking for colors on the image window (it does outside of the Lightroom window!)

  I found that the problem occurs when the preferences are set to use the graphics processor.

  Disable the GPU and the color eyedropper tool returns to work on the image window.

• 'Open with Photoshop Elements' does not work

  My photo does not open in Photoshop Elemtens, when I use "open with" to a JPEG file. The program starts, but no picture opens. What can I do?

  I did as you said, but it does not work.

  But I found the Solution in another forum:

  'open with photoshop elements EDITOR' and not with photoshop elements...

  He now works :-)

• With the clause does not work in SqlPlus for DataBase 11 GR 8 1 material

  I have 11 GR 1 database material, when I connect to my database through SqlPlus (version 8.0.6.0.0) this query

  with x as (select * from areas) select * from x;

  does not work. But when you use SqlPlus provided by 11g, this query works well. This query can run on an older version of SqlPlus?

  user12222356 wrote:
  This client software is installed with Oracle developer 6i form. should I remove all the form developer? Latest version of the form developer is available for 11 GR 1 matter?

  Well, you have problems with the developer of forms?

  I wouldn't recommend delete because you have problems with the SQL more customer that goes with it. I recommend to download the instant client and using them for your needs of sqlplus and leaving the rest products installed on your machine only.

• I got a problem with intel rst does not work, so I uninstalled it but want to reinstall.

  Original title: RST

  My cell phone message says RST service does not work - I does not recognize so I uninstalled Rapid Storage Technology completely and I can't restart.  Startup Repair is on-screen and worked for always.

  Hi Sue1234,

  Follow the steps below for a possible solution:

  Step 1: Start in safe mode and then try to perform the system restore when you uninstalled the RST.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: Try restoring the system to safe mode.

  You can follow the items below:

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  I hope this helps.