Interactive report - is possible to find and change if necessary the unique column.

Similar Questions

• Portege M400: Is it possible to receive and make calls with the SIM card

  Is it possible to receive and make calls with the card SIM module in the Portege M400?

  I know that you can send and receive sms messeges, which, according to me, the software is not all good because you can't hold much, and you can't send to ems or mms.

  But there may be other software here?

  Hello

  What software do you mean exactly?

  As far as I know that the MobiLink was preinstalled on some units Portege M400.
  This software supports these features:
  Send and receive SMS, composition and read TEXT messages in several languages, compose and send to multiple recipients, the mobile contacts address book support, Rich edit for the launch of URL and Email using embedded addresses.

  As you can see that you can not use this software to make calls!
  And unfortunately other software does not know me :(

  With regard to the MobiLink Communications Software Suite;
  The details can be verified here:
  http://www.novatelwireless.com/products/solutions/MobiLink.html

  Greetings

• Is it possible to click and hold something on the screen with the keyboard?

  Original title: click and hold the function with a mouse?

  Is it possible to click and hold something on the screen with the keyboard? My mouse is dying and I can't afford a new right now, but I need to move things on the desktop and do not know how, is there maybe a shortcut for this?

  Hello

  There is no this keyboard shortcut to accomplish the task.

  For more information about keyboard shortcuts, see: keyboard shortcuts for Windows XP

  Hope the helps of information.
  Please post back and we do know.

• After leaving the screen saver, display shuts off and change to select the user account screen

  I have a windows7 32 bit desktop. While everything works fine the problem is whenever I leave the keyboard and mouse intact even for one minute, the display turns off and change to select the screen of the user. 'Disable the display' and "put the computer to sleep" has been on 'never' and screen saver changed nothing but the problem still persists.

  Please provide the solution

  Hi Sam,

  Sorry for the late reply.

  I understand that when your computer is left idle, the select user screen appears.

  The issue can be caused if the power plan settings are incorrect.

  To get a better understanding of the issue, I want to know:

  1. What is the brand and model of your computer?
  2. You did it changes on your computer before this problem?

  To resolve the problem, try the following methods:

  Method 1: Troubleshooting to be able to run.

  The resolution of the problems of power check things as settings timeout of your computer, which determines how long the computer waits before turning off the display or enter the mode 'sleep'. These settings can help you save energy and extend the life of the battery in your computer.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  After trying method 1, if the problem persists, try Method 2.

  Note: When you're done, restart your computer and check if your computer works fine. If the problem persists, try Method 2.

  Method 2: Change the screensaver settings.

  I suggest you follow also the suggestion given in the answer by Vijay B answered the

  May 14, 2013.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/disable-automatic-lock-with-Windows-7/1d45e806-6a8a-492C-A0C7-ac85b759ad66

  Please, try the above suggestions and we provide the information required so that we can help you.

• How can I find and get rid of the duplicates

  How can I find and get rid of the duplicates

  Hi sinkerslider,

  I apologize for the long delay. In what app work? Looking for double .jpgs, PSD etc files. ? Also, what device and operating system are you using? Thank you very much!

  -Kathleen

• Possible bug in inDesign CS5 with find and change

  This could be a problem with my script, or it may be a bug, not sure.

  The script is used to find a double space in a text fragment and change to single space.

  It only works once when it is run.

  To make it work again you must close and reopen inDesign.

  Here is the code:

  app.findTextPreferences.findWhat = "";
  app.changeTextPreferences.changeTo = "";
  App.documents [0] .changeText ();

  Works for me...

  Try to screw up your prefs.

  Substances

• How to find and change settings when Firefox Sync synchronize?

  As the XMarks bookmark Synchronizer deteriorated to the point where it is unusable, I transfer my Firefox Sync synchronization tasks. It seems to work very well, but I would like to know the settings (and if possible, be able to change) that determine when its synchronizations. Does sync (a) immediately, and automatically, whenever a bookmark is changed? (b) what FF starts or firm? (c) when I say explicitly that she? (I know that c is true, because there is a menu option 'Sync'). Where can I find this info?

  ~ Tx, Ken

  a. Yes, Sync will contact the server almost immediately after a new bookmark is added. A slight delay is built to quickly add multiple bookmarks.
  b. sync will contact the server at the launch of Firefox to search for changes made on other devices connected to this sync account.
  c. There is a synchronization toolbar button sitting in the range of customization can be used to "synchronization on demand.

• In Vista, it is possible to find and replace a specific name that I used many files on the hard drive?

  My apologies if someone already asked this (I couldn't find the answer however). I used the name of a person to dozens of (mostly Word) documents that are kept in many different files on my hard drive. I know that I can dig each document separately and then use hidden word and replace the tool to change the name. But this will inevitably take time. Is it possible to do a through - computer find and replace so that I don't have to do this exercise once? Any help gratefully received. Thank you.

  Hello

  I suggest you go through the article and check if it helps.

  Searching in Windows Vista, part 1

  http://Windows.Microsoft.com/en-CA/Windows-Vista/searching-in-Windows-Vista-part-1-secrets-of-the-search-box

  Searching in Windows Vista, part 2

  http://Windows.Microsoft.com/en-CA/Windows-Vista/searching-in-Windows-Vista-part-2-Start-menu-and-control-panel-search-tips

  Searching in Windows Vista, part 3

  http://Windows.Microsoft.com/en-CA/Windows-Vista/searching-in-Windows-Vista-part-3-using-advanced-search-for-those-hard-to-find-files

  Improve Windows searches using the index: frequently asked questions

  http://Windows.Microsoft.com/en-CA/Windows-Vista/improve-Windows-searches-using-the-index-frequently-asked-questions

  Hope this helps and let us know if you need more assistance.

• Text find and change the problem CS3 and CS4 scripts

  I use the script below to find text and turn them into others.

  There is one thing the script can't do it for me.

  Example:

  
  (g) management

  (1) that no law that is adopted in the Cayman Islands, a tax to collect profits, income, gains or satisfaction does apply to the company or its activities; and

  (2) that the above-mentioned tax or any tax in the form of rights of succession or inheritance tax is payable in respect of shares, debentures or other obligations of the company.

  Example: (end)

  I had a lot of subjects or points in the passage. And I want to change the space between '(g)' and 'Management' in a tab character. So I revised the plain text file 1texte.

  PS: 1text.txt is filled with what to change.

  text {findWhat: "^ p(^?)" ' "} {changeTo: "^ p(^?)"} ^ t "} {includeMasterPages:true, includeHiddenLayers:true, includeFootnotes:true, wholeWord:false} search all space-dash-space and replace it with an en dash."

  The result is:

  (^?) ^ tManagement

  (^?) ^ tthat any law that is passed in the Cayman Islands, imposing a tax on profits, income, not capital gains or satisfaction applies to the company or its activities. and

  (^?) ^ tthat the above-mentioned tax or any tax in the form of rights of succession or inheritance tax is payable in respect of shares, debentures or other obligations of the company.

  PS: ^ t is a tab character.

  result (END)

  This is not what I want.

  It should be"(g) ^ tManagement'.

  PS: ^ t is a tab character.

  Please someboady help me out revised the script below to change the text in what I want. Thank you very much.

  Here's the script.

  FindChangeByList.jsx
  An InDesign CS4 JavaScript
  /*
  @@BUILDINFO @ "FindChangeByList.jsx" 2.0.0.0 January 10, 2008
  */
  Loads a series of strings delimited by tab characters from a text file, and then executes a series
  Find/replace operations based on the lines read from the file.
  //
  The data file is delimited by tabs, returns to cart that separates records.
  //
  The format of each record in the file is:
  findType < tab > findProperties < tab > changeProperties < tab > findChangeOptions < tab > description
  //
  Where:
  < tab > is a tab character
  findType is 'text', 'grep' or 'glyph' (this sets the find/replace operation type to use).
  findProperties is a recording of properties (text) search preferences.
  changeProperties is a recording of properties (text) of the change preferences.
  findChangeOptions is a recording of properties (text) of the options find/replace.
  Description is a description of the search/replace operation
  //
  Very simple example:
  text {findWhat: "-"} {changeTo: "^ _"} {includeMasterPages:true, includeHiddenLayers:true, includeFootnotes:true, wholeWord:false} find all double hyphens and replace by an em dash.
  //
  More complex example:
  text {findWhat: ' ^ 9 ^ 9.} {' ^ 9 ^ 9 '} {appliedCharacterStyle: 'price'} {include notes: true, include master pages: true include hidden layers: true, any word: false} find $ 10.00 to $ 99.99 and apply the character style 'price '.
  //
  All metacharacters search InDesign are allowed in the properties 'findWhat' and 'changeTo"findTextPreferences and changeTextPreferences.
  //
  If you enter the backslashes in the object findGrepPreferences findWhat property, they must be "escaped".
  as shown in the example below:
  //
  {"findWhat: '"\\s+ "}
  //
  To learn more about InDesign scripting, go to http://www.adobe.com/products/indesign/scripting/index.html
  or visit the InDesign Scripting user to http://www.adobeforums.com users forum
  //
  main();
  main() {} function
  var myObject;
  Ensure that the interaction of the user (dialog boxes display, etc.) is turned on.
  app.scriptPreferences.userInteractionLevel = UserInteractionLevels.interactWithAll;
  If (app.documents.length > 0) {}
  If (app.selection.length > 0) {}
  {Switch(App.Selection[0].constructor.) Name)}
  case 'PointInsertion ':
  'character ': case
  case "word":
  case 'TextStyleRange ':
  case "line":
  stops of the "Point":
  case "TextColumn":
  case 'text ':
  case "cell":
  case "column":
  case 'Row ':
  case 'Table ':
  myDisplayDialog();
  break;
  by default:
  An option has been selected, but it was not a text object, so look for in the document.
  myFindChangeByList (app.documents.item (0));
  }
  }
  else {}
  Nothing has been selected, then just search for the document.
  myFindChangeByList (app.documents.item (0));
  }
  }
  else {}
  Alert ("no document is open. Please open a document and try again. ») ;
  }
  }
  function myDisplayDialog() {}
  var myObject;
  var myDialog = app.dialogs.add({name:"FindChangeByList"});)
  {with (MyDialog.dialogColumns.Add ())}
  {with (dialogRows.Add ())}
  {with (dialogColumns.Add ())}
  staticTexts.add ({staticLabel: "beach of research :"});})
  }
  var myRangeButtons = radiobuttonGroups.add ();
  {with (myRangeButtons)}
  radiobuttonControls.add ({staticLabel: "Document", checkedState:true});})
  radiobuttonControls.add ({staticLabel: "Selected Story"});
  If (app.selection [0] .silence! = "") {}
  radiobuttonControls.add ({staticLabel: "Sélection", checkedState:true});})
  }
  }
  }
  }
  Ditto var = myDialog.show ();
  if(myResult == true) {}
  {Switch (myRangeButtons.selectedButton)}
  case 0:
  myObject = app.documents.item (0);
  break;
  case 1:
  myObject = app.selection [0] .parentStory;
  break;
  case 2:
  myObject = app.selection [0];
  break;
  }
  myDialog.destroy ();
  myFindChangeByList (myObject);
  }
  else {}
  myDialog.destroy ();
  }
  }
  function myFindChangeByList (myObject) {}
  var myScriptFileName, myFindChangeFile, myFindChangeFileName, myScriptFile, ditto;
  var myFindChangeArray, myFindPreferences, myChangePreferences, myFindLimit, monarticle;
  var myStartCharacter, myEndCharacter;
  var myFindChangeFile = myFindFile("/FindChangeSupport/1test.txt")
  If (myFindChangeFile! = null) {}
  myFindChangeFile = File (myFindChangeFile);
  Ditto var = myFindChangeFile.open ("r", not defined, undefined);
  if(myResult == true) {}
  Loop in find/replace operations.
  {}
  myLine = myFindChangeFile.readln ();
  Ignore blank lines and comment lines.
  If ((myLine.Substring (0.4) == "Text") |) (myLine.substring (0.4) == "grep"). (myLine.substring (0, 5) is "glyph")) {
  myFindChangeArray = myLine.split ("\t");
  The first field in the line is the findType chain.
  myFindType = myFindChangeArray [0];
  The second field in the line is the FindPreferences channel.
  myFindPreferences = myFindChangeArray [1];
  The second field in the line is the ChangePreferences channel.
  myChangePreferences = myFindChangeArray [2];
  The fourth field is the range - used only text find/replace.
  myFindChangeOptions = myFindChangeArray [3];
  {Switch (myFindType)}
  case 'text ':
  myFindText (myObject, myFindPreferences, myChangePreferences, myFindChangeOptions);
  break;
  case "grep":
  myFindGrep (myObject, myFindPreferences, myChangePreferences, myFindChangeOptions);
  break;
  case 'glyph ':
  myFindGlyph (myObject, myFindPreferences, myChangePreferences, myFindChangeOptions);
  break;
  }
  }
  } while(myFindChangeFile.eof == false);
  myFindChangeFile.close ();
  }
  }
  }
  function myFindText (myObject, myFindPreferences, myChangePreferences, myFindChangeOptions) {}
  Reset the preferences of find/replace before each search.
  app.changeTextPreferences = NothingEnum.nothing;
  app.findTextPreferences = NothingEnum.nothing;
  var myString = "app.findTextPreferences.properties =" + myFindPreferences + «;"»»» » ;
  myString += "app.changeTextPreferences.properties =" + myChangePreferences + ";". " » ;
  myString += "app.findChangeTextOptions.properties =" + myFindChangeOptions + ";". " » ;
  app.doScript (myString, ScriptLanguage.javascript);
  myFoundItems = myObject.changeText ();
  Reset the find/change preferences after each search.
  app.changeTextPreferences = NothingEnum.nothing;
  app.findTextPreferences = NothingEnum.nothing;
  }
  function myFindGrep (myObject, myFindPreferences, myChangePreferences, myFindChangeOptions) {}
  Reset the find/change grep preferences before each search.
  app.changeGrepPreferences = NothingEnum.nothing;
  app.findGrepPreferences = NothingEnum.nothing;
  var myString = "app.findGrepPreferences.properties =" + myFindPreferences + «;"»»» » ;
  myString += "app.changeGrepPreferences.properties =" + myChangePreferences + ";". " » ;
  myString += "app.findChangeGrepOptions.properties =" + myFindChangeOptions + ";". " » ;
  app.doScript (myString, ScriptLanguage.javascript);
  var myFoundItems = myObject.changeGrep ();
  Reset grep find/change preferences after each search.
  app.changeGrepPreferences = NothingEnum.nothing;
  app.findGrepPreferences = NothingEnum.nothing;
  }
  function myFindGlyph (myObject, myFindPreferences, myChangePreferences, myFindChangeOptions) {}
  Reset the preferences of glyph in find/replace before each search.
  app.changeGlyphPreferences = NothingEnum.nothing;
  app.findGlyphPreferences = NothingEnum.nothing;
  var myString = "app.findGlyphPreferences.properties =" + myFindPreferences + «;"»»» » ;
  myString += "app.changeGlyphPreferences.properties =" + myChangePreferences + ";". " » ;
  myString += "app.findChangeGlyphOptions.properties =" + myFindChangeOptions + ";". " » ;
  app.doScript (myString, ScriptLanguage.javascript);
  var myFoundItems = myObject.changeGlyph ();
  Reset glyph in find/change preferences after each search.
  app.changeGlyphPreferences = NothingEnum.nothing;
  app.findGlyphPreferences = NothingEnum.nothing;
  }
  function myFindFile (myFilePath) {}
  var myScriptFile = myGetScriptPath();
  var myScriptFile = File (myScriptFile);
  var myScriptFolder = myScriptFile.path;
  CheminMonFichier = myScriptFolder + CheminMonFichier;
  If (queue (CheminMonFichier) .exists == false) {}
  Display a dialog box.
  CheminMonFichier is File.openDialog ("choose the file containing your list find/replace");.
  }
  Return CheminMonFichier;
  }
  function myGetScriptPath() {}
  try {}
  myFile = app.activeScript;
  }
  {catch (MyError)}
  myFile = myError.fileName;
  }
  return myFile;
  }

  I'm not a writer, but I'll take a stab and try to make a difference here.

  The main problem, in my opinion, is that you use a plain text instead of GREP search. Text gross has no provision to replace the text found by itself, for example, rather than using the codes you entered a literal string. Your search text of ' ^ p(^?) ' means find any character in brackets that occurs after a paragraph break. I would use in GREP ^ \s+ (\(.+?\)) which translates to find an opening parenthesis at the beginning of a paragraph (so he'll find if it happens to be the first character in th in a story) followed by a number any characters up to the first parenthesis (in the case where you have double the figures or double entries letter) followed by ANY white space (in the case where it is not an ordinary space or multiple spaces). Replace $1\t which means the text found in the first set of parentheses in query search followed by a tab.

  Parentheses are special in GREP, they surround groups of terms you want to re-use the text found, so looking for the actual characters you need to 'escape' with the-prefix, so \(.+\) will find a paren open followed by all the characters up to the end last paren in the paragraph. Addition of the? After the + makes research stop at the first closing paren met, although there are several sets in the paragraph.

• need to find and change the connection speed

  I take a class online and when I ran the test of the pre-class, the report said my connection on the modem speed speed but must be something else. How can I fix it?

  I take a class online and when I ran the test of the pre-class, the report said my connection on the modem speed speed but must be something else. How can I fix it?

  Hey cherokeegirl507

  Contact your internet service provider

  They provide your broadband or dial-up connection

  discuss with them ways to achieve best download speed plan them and or what is required by your class online

  and also to discuss with the people who run the online class

  Walter, the time zone traveller

• The Finder and windows after restarting, the browser windows

  Some time ago different finder windows and windows of the browser in different spaces put in its original place after reboot. Now, this no longer works. I don't know if I changed something.

  I checked when I shut down or restart selected "Reopen windows when you log back in.

  Reopen the application windows and place it in the same place, but not the finder and browser windows. A few days ago, it worked. How to solve this?

  Thank you

  System Preferences > General - uncheck "Close windows when you exit the application.

• my external cd will not appear in the finder or on the desktop.  I went into preferences for the finder and intended to show the CD, I can load a blank cd and iTunes says and I burn on it then the cd will appear on the desktop.

  I don't see my external cd in the finder under devices, I can load a blank cd and iTunes says it's white and I can burn songs, then the cd icon appears on the desktop, went into preferences for the finder and ticked the box show the cd.  Help please?  CD has been disconnected and placed back started loading but no show, iMac says he had an attached cd when I search.

  CD/DVD players don't appear that a disk is inserted. It's normal.

• Find and move text within the existing framework of anchored

  I have a great story that spans several pages text. It contains a number of paragraphs that have the following content:

  [empty anchor for an existing character, but the anchor text frame] [important book that contains NO tab] [TAB] [intermediate text containing NO tab] [TAB] [end text containing NO tab] [empty anchor for an another existing character, but the block of anchor text]

  I need a script (Javascript, preferably) that:

  1. find a paragraph that starts with a character of anchor;

  2. find and cut the main text between the character of the anchor and the first TAB after

  3. Paste the main text in text anchored at the beginning of the paragraph;

  4. in the same paragraph, find the final text between the second (and last) TAB and the character of the second (and last) anchor at the end of the paragraph;

  5. glue the final text under text anchored at the end of the paragraph;

  6. repeat 1. -5. for the paragraph all in the same article that starts with a character of the anchor.

  
  

  I'm a JS programmer advanced, but new scripts CreativeSuite. I just understood how to search for some text, and I know that the 'parent' of an anchored object is a 'character' - but now to I access the contents of an object anchored to its parent character?

  
  

  Even better:

  function movetoanchored(find) {
    var myText = find.characters.itemByRange(1, -1).texts[0];
    var myFrame = find.characters[0].textFrames[0];
    myText.move(LocationOptions.AT_BEGINNING, myFrame);
  };
  
  function main() {
    var myStory = app.selection[0].parentStory;
    app.findGrepPreferences = app.changeGrepPreferences = null;
    app.findGrepPreferences.findWhat = "^~a\\S+";
    var myFinds = myStory.findGrep(true);
    for (i = 0; i < myFinds.length; i++) movetoanchored(myFinds[i]);
    Window.alert(myFinds.length + " moves performed");
  };
  
  app.doScript(main, ScriptLanguage.JAVASCRIPT, undefined, UndoModes.ENTIRE_SCRIPT, "MoveToAnchored");
  

• Find and replace Question (skipping the code block)

  Hi, I worked on it for a few days now and can't seem to make it work. I read through the tutorials page Trent Mueller, etc., but it does not work just the way I need to. I'm really starting to get a little goofy to manually place images based on finding the unique product code. I'd appreciate any help really.

  I'm working on a catalogue and I have about 200K lines of products that use one of the 10 images. Basically, I need to find and replace:

  < class td = "xl15700" style = "border: solid windowtext .5pt ' > PRODUCT < table >

  < class td = "xl64700" style = "Dimensions are: 11.0pt;" color: black; Police-weight: 700;

  text - decoration:None; Text-Underline - style: None; Text-line - through:None;

  do-family: Calibri; border-top: none; border-right: none; border-bottom: .5pt solid windowtext;

  border-left: none; background: yellow; MSO-model: black no ' > < table > ABCD

  < class td = "xl64700" style = "border: solid windowtext .5pt ' > < table > ABC

  < class td = "xl64700" style = "border: solid windowtext .5pt ' > DEF < table >

  < class td = "xl64700" style = "border: solid windowtext .5pt ' > < table > GHI

  < class td = "xl70700" style = "border-top: none" >  </td>

  in:

  < class td = "xl15700" style = "border: solid windowtext .5pt ' > PRODUCT < table >

  < class td = "xl64700" style = "Dimensions are: 11.0pt;" color: black; Police-weight: 700;

  text - decoration:None; Text-Underline - style: None; Text-line - through:None;

  do-family: Calibri; border-top: none; border-right: none; border-bottom: .5pt solid windowtext;

  border-left: none; background: yellow; MSO-model: black no ' > < table > ABCD

  < class td = "xl64700" style = "border: solid windowtext .5pt ' > < table > ABC

  < class td = "xl64700" style = "border: solid windowtext .5pt ' > DEF < table >

  < class td = "xl64700" style = "border: solid windowtext .5pt ' > < table > GHI

  < class td = "xl70700" style = "border-top: none" > " < img src ="... /.. / images/PRODUCT.jpg "> " < table >

  I tried to use many of the buildings, but I can't move me many questions. I'd really appreciate any guidance and help.

  I thought about it...

  To find:

  U27-2CHIP-(C|) MY | THERE | K)\n*\s*]*)>(.*?) \n*\s*]*)>(.*?) \n*\s*< td(\b[^="">]*)>(.*?) \n*\s*]*)>(.*?) \n*\s*]*)>(.*?)

  Replace:

  U27-2CHIP-$1\n$3\n$5\n$7\n$9\n

  Thanks for your help, Murray. I appreciate it.

• Find and replace all of the odd numbered lines?

  Is their way to search for and replace or delete really, all the odd numbered lines in code view? I have about 12,000 lines of code but you don't need that things on the even lines.
  
  Thank you very much for the help!

  The odd lines contain random numbers and letters, that's why I can't just find and replace. If they were embedded in a tag, say a 34341 is the way for me to tell dreamweaver to remove all the interval and ? That would solve the problem.