Interface travel Stop - SRS complete with warning

Hi all

When we run the trip-Stop - SRS Interface it end with warning. The message is very long, but the part of the error is the following:

msg_buffer == > the inventory Interface has no process some lines in the batch as they are locked by another process.
W:inventory Interface has no process some lines in the batch as they are locked by another process

When we asked the person who runs the program, we learned that they made the expedition before the acceptance of the order (sorry if the expression is not very clear, I translate from Turkish and I have almost no knowledge about OM management or inventory). Thus, the elements seem to always be in stock of the sender and receiver only sees all incoming orders.

I looked the metalink notes, but did not find any useful doc. Please help me with this.

I can provide some information if necessary.

Kind regards.
Burak

Hey Burak;

What is your EBS also release OS?

The inventory interface has no process some lines in the batch as they are locked by another process.

Have you checked that you have an error message in the alerts db log? Have you checked that you have lock on the database?

Pelase check also:
The inventory Interface that has failed for some deliveries [ID 754528.1]
CAN'T INTERFACE INVENTORY LINES AS THEY ARE LOCKED BY ANOTHER PROCESS [567471.1 ID]

Respect of
HELIOS

Tags: Oracle Applications

Similar Questions

Stop of trip completed with warning of interface
Hi all

For a sales order, the line has been shipped where the line are as taken showning and according to delivery status is closed with the next step is showing that "run the Interface." While I presented Interface travel stop, completed by the caveat. The log file says:

---------------------------------------------------------------------------
Execution of the expedition: Version: 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
Module WSHINTERFACES: Interface travel Stop - SRS
---------------------------------------------------------------------------
Current system time is April 20, 2009 07:31:03
---------------------------------------------------------------------------

* Starts * April 20, 2009 07:31:03
* Ends * April 20, 2009 07:31:03
Stop of trip interface is complemented by the caveat
---------------------------------------------------------------------------
Beginning of the FND_FILE log messages
---------------------------------------------------------------------------
From WSH debugger == > 20/04/2009 07:31:03, Session ID = 2850630
The current shipping related debug settings are the following:
OM: Debug level == > 0
INV: Debug level == >
WSH: Active Debug == > Yes
WSH: Debug prefix file == >
WSH: Debug level == > statement
WSH: Debug logs directory == > /dtmp
WSH: Debug Module == > %

Enter WSH_SHIP_CONFIRM_ACTIONS. INTERFACE_ALL_WRP (WSHDDSHB.pls 120.19.12010000.3) (20/04/2009 07:31:03)
P_MODE == > ALL
P_STOP_ID == > a NULL value
P_DELIVERY_ID is > 2888
P_LOG_LEVEL == > 1
p_organization_id is > 381
p_num_requests == > 1
p_stops_per_batch == > 1
l_req_data == >
Enter WSH_SHIP_CONFIRM_ACTIONS. INTERFACE_ALL (WSHDDSHB.pls 120.19.12010000.3) (20/04/2009 07:31:03)
P_MODE == > ALL
P_STOP_ID == > a NULL value
P_DELIVERY_ID is > 2888
P_LOG_LEVEL == > 1
p_organization_id is > 381
p_stops_per_batch == > 1
INTERFACETRIPSTOP: LOOKING FOR STOP FOR DELIVERY_ID 2888
l_stop_id is > 3031
InterfaceTripStop: treatment, stop_id 3031 for INV OM DSNO
l_inv_interface == > 1
l_om_interface == > 1
l_dsno_interface == > 1
l_interface_mode == > DSNO OM INV
l_stop_id is > 3031
l_override_wf == > N
Ship to deliver workflow is enabled for one or several deliveries related to that case == >
Ship to deliver workflow is enabled for one or more deliveries on this S
Back to top
Interface_All: jump stop_id 3031
========================================================================
l_stops_count == > 0
InterfaceTripStop: no stop is processed without being referred to as interface lines
five.
errbuf == > travel stop Interface is complemented by the caveat
RETCODE == > 1
l_completion_status == > WARNING
Out of WSH_SHIP_CONFIRM_ACTIONS. INTERFACE_ALL (20/04/2009 07:31:03,.01 seconds)
Automatic remediation of == >
l_recs = 0 == >
errbuf == > travel stop Interface is complemented by the caveat
RETCODE == > 1
l_completion_status == > NORMAL
Out of WSH_SHIP_CONFIRM_ACTIONS. INTERFACE_ALL_WRP (20/04/2009 07:31:03,.03 seconds)
Summary of the expedition of the API calls *.
WSH_SHIP_CONFIRM_ACTIONS. INTERFACE_ALL_WRP: 1 calls:.03 seconds
WSH_SHIP_CONFIRM_ACTIONS. INTERFACE_ALL: 1 calls:.01 seconds
*****************************************************

Thanks in advance for your help.

Kind regards
Jyoti

Published by: Jyoti.Mohanty on April 20, 2009 02:46
Hello
This problem is documented in 785934.1 (Metalink doc).
Summary of the solution is given below. Please, make sure you read the document above to confirm that the solution applies to your environment.

--
1. go in the liability: System Administrator.

2. go to profile > system.

3. the profile of queries option "WSH: ship instead deliver workflows ' and set this value to 'Yes'"
at the level of the Site.

4. test the issue again.

5 migrate the solution as the case in other environments

What is the purpose of the program Interface travel stop?
At the time confirm ship, an Interface program travel stop gets submitted. What is the purpose of this program?
Interface travel Stop - stop Interface very essential travel plays in the Oracle order management application.
This is the simultaneous program triggering interface > Submit Request. Judgment of travel of the interface.
Or you can also trigger this program competed at the ship to confirm uncheck the? Reporter Interface? checkbox. By default, this check box is clear only.

Stop of trip interface has 2 parts
1. He treat data for order management.
2. it processes data related to inventory. (and we have separated CP for this also? The inventory interface?).

In the first part, it is the point on the oe_order_lines_all as well as wsh-delivery_details table and once this part correctly executed only then SECOND phase of ITS triggered. If the FIRST part error for some reason then the 2nd part is not raised, and even if you try to send? The inventory Interface?, he's not going to get you data. Reason? It will validate and check if oe_interfaced_flag in the wsh_delivery_details table is there or not. If N or X? Interface of stocks? Let's not get this folder for the treatment.

I have observed that in most of the time users submit trip interface stop while the ship confirm, but there are significant cases where favorite client to run it as a planned process without specifying delivery # or Trip #, because their volume of orders is very high and they want to run this process for a time of the day.

Please note that unless this execution process, workflow for the command line is maintained to notified SHIP_LINE and will not progress to complete billing and finally. So while deciding trigger for this program, you will need to make sure that when you want customer invoice.

A little advice I give here is, never try to stop the execution of this program, unless you have a very valid reason. Any stop its will result in stacking the data in the State of the workflow notified SHIP_LLINE and as soon as you start again after a stop running it will take a deep dive based on your performance.

Source:
http://eoracleapps.blogspot.com/2009/11/interface-trip-stop-its-in-order.html

Failed: WARNING: execution completed with warning - when compiling

Hi all

I Googled it before posting here.

One of the packages (package body) become invalid on the diagram of the test after installing the update.

I tried to recompile it:

modify the body of package zoom.pkg_bagrcl_card_pts compilation;

or

dbms_ddl.alter_compile exec ('BODY of PACKAGE', 'zoom', 'pkg_bagrcl_card_pts');

Received the message:

SQL command: package ZOOM. PKG_BAGRCL_CARD_PTS
Failed: WARNING: execution completed with warning
ZOOM on the package. Modified PKG_BAGRCL_CARD_PTS.

I tried to see updates in custody help

ALTER session set plsql_warnings = ' ENABLE: ALL ';

But it did not help me.

How can I see in custody?

Try the all_errors view

SQL> desc all_errors
 Name                                      Null?    Type
 ----------------------------------------- -------- ----------------------------
 OWNER                                     NOT NULL VARCHAR2(30)
 NAME                                      NOT NULL VARCHAR2(30)
 TYPE                                               VARCHAR2(12)
 SEQUENCE                                  NOT NULL NUMBER
 LINE                                      NOT NULL NUMBER
 POSITION                                  NOT NULL NUMBER
 TEXT                                      NOT NULL VARCHAR2(4000)
 ATTRIBUTE                                          VARCHAR2(9)
 MESSAGE_NUMBER                                     NUMBER

Error in CP and report completed with warning
Hi all

I'm new to XML Publisher, I followed the steps I gave this link

http://Oracle.anilpassi.com/XML-Publisher-concurrent-program-xmlp.html and created the report and when I ran the program at the same time, my program completed with warning. And I can't be able to view the XML output.

Thanks and greetings
Srikkanth.M
Looks like you used the desktop client 11g BEEP for EBS reports developing.
Not all features in 11g is supported in EBS now. Please download the Patch 12395372 which has the setup.exe for client computer and install it.
It comes to 5.6.3 version of the desktop client.

How to set the simultaneous request completed with warning?
Hi all:
How to set the simultaneous request completed with warning in oracle 11.5.9?

For example:

I completed an application with "Completed" 'Normal '.
After I put a condition similar to when xxx > 0 then
It will complete a request indicates 'Complete' 'warning '.

My environment is: oracle 11.5.9 and operating system is Linux Redhat 4.0

Concerning
Terry
Terry,

You can use 'FND_CONCURRENT. Function SET_COMPLETION_STATUS.

Note: 866194.1 - is there a method to return a 'Warning' to host Language simultaneous program status?

The Oracle Applications Developer's Guide
http://download-West.Oracle.com/docs/CD/B11454_01/11.5.9/Acrobat/115devg.PDF

FND_CONCURRENT. SET_COMPLETION_STATUS
http://forums.Oracle.com/forums/search.jspa?threadID=&q=FND_CONCURRENT.SET_COMPLETION_STATUS&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001

Thank you
Hussein

Quesiton on Interface travel Stop
We have a situation where our actual shipping is made by a third party. Advisers wrote that two interfaces, one to create a file for shipping once things are released pick and the other to import a file that will be delivered to comfirm the same sense.

We had a situation where we were backed up for a while.

Essentially, we have imported some files that were to ship confirm many picked orders. I think what happened was that they have closed a large number of deliveries, but there are exceptions shipping so that even if they were closed, the corresponding order lines are always in a selected state. I guess what happened was that ITS has not been run for them, and that's why they are where they are.

Thus, many exceptions were dates tp not valid, so I advanced and closed all the people. But... I still need to close the order lines.

Can I run without HIS knowledge, and if it will it work for all eligible deliveries, or what I need to start manually for each delivery?

If I peut run it wide open, it will affect only deliveries that are eligible (i.e., only those that are ship confirmed)?

Thanks for the tips!

-jerry
Hi Jerry,

I see no reason to not start blind if you have 100s of deliveries for which command lines need closing. As you claimed it, it will simply ignore something unacceptable. If you still get exceptions however, you might want to hone more on where all the problems are... that is run in debug mode and back up your OM: Debug level 5 so that you can see something significant in the output log for deliveries/travel stops individual.

A word of caution - if you are not providing a travel or the delivery stop in its then depending on your configuration settings (i.e. If you have several associations with their own shipping) you can at least fill out the shipping warehouse in the setting of the organization rather than run really "blind."

It seems that your problems have been in part DSNO interface with exceptions tp date. I'm sure you're already aware that it is also possible to rotate the 3 parts of ITS separately if necessary for troubleshooting... lots of help on MOS for this.

Good luck...!

Jon

Create accounting completed with warning

Hello friends
I am facing a problem while running create accounting program in AR but his works well in AP. Recognition of creation complete with warnings and account program completed with error.
Excerpt from the log file:
An internal error occurred in the xla_ar_acct_hooks_pkg.main program.
...
Call for upgrade_11i_r12_post +.
Get the 11i upgrade application
End upgrade_11i_r12_post-
...
ARP_XLA_EXTRACT_MAIN_PKG.load_line_data_ctlgd () +.
EXCEPTION of OTHER in arp_xla_extract_main_pkg.load_line_data_ctlgd
Error: The user-defined Exception
EXCEPTION of OTHER in arp_xla_extract_main_pkg.extract
Error: The user-defined Exception
Technical problem: error encountered in extract API product
I downloaded the log file full here.
I saw a few recommendations in previous posts, but I can't recognize that applying on my environment. The file version of xlajecci.pkb is:
strings - a $XLA_TOP/patch/115/sql/xlajecci.pkb | grep '$Header '.
REM $Header: xlajecci.pkb 120.59.12010000.2 2008/08/06 21:10:29 sbhaskar ship $
Concerning
Mohamed Ahmed

Hi Rudy,.

Please check the following note and see if this helps you:

R12 create accounting program fails with the EXCEPTION of OTHER arp_xla_extract_main_pkg.load_line_data_ctlgd [427654.1 ID]

I hope this helps!

Best regards

simultaneous request completed with warning
Hello

Sometimes, we found that all concurrent request completed with no attention, no output file that is generated, is that it related to the question of system resources?
11.5.10 on linuxx86

Concerning
srpa01red wrote:
Hello
the log file is needle like below:

Application object library: Version: 12.0.0

Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.

Module FNDGSCST: collect statistics of schema
---------------------------------------------------------------------------

Current system time is April 18, 2011 17:18:13

---------------------------------------------------------------------------

* Starts * April 18, 2011 17:18:14

What is the full contents of the log file? If so, please activate the trace and debug and submit the request again. In addition, please see that all errors are reported in the database log file.

Thank you
Hussein

INV 11i Interface travel Stop - end with warning

(1) the user forgot to update the exchange rate information and made a reception without her.
(2) then they put prices and run the interface again.
The interface ends always in alert and does not not the records in the MTL_TRANSACTIONS_INTERFACE table
On the Interface of the Transaction, the error message is
Interclass conversion between CAD and EUR is not defined
Define Conversions interclass screen allows you to define conversions interclass
I also checked Oracle document 338402 , and everything is in order.
How do overcome us this situation?
I think reset the status of the error of the registers and raise the simultaneous program.
However, it is has on the interface table, the columns related to currency: CURRENCY_CODE, CURRENCY_CONVERSION_DATE, CURRENCY_CONVERSION_RATE, CURRENCY_CONVERSION_TYPE
Should I update these columns with the information of EUROS?
Kind regards
DjG

I again the line by using the form interface and the file is processed.

No change via the back-end is necessary.

Simultaneous program completed with warning

Hi team

I am trying to generate a XML Publisher report, that i generate the XML code in the file RDF, creation and RTF designed and loaded the XML for this model RTF model
Created the simultaneous request
The Editor created the definition of data and model in my xml finally added my program contributing to the application group... I did all this correct to the best of my knowledge

When I submit the request he gets filled with the State of alert and the output pdf file isn't genereted when I checked the log view I do not understand why it causes? Please suggest me what is cause and should I need to do more to process my application

I enclose the logfile for your reference, I'll appreciate your help and suggestion

Log file

+-----------------------------
| Starting concurrent program execution...
+-----------------------------

Arguments
------------
P_ITEM_STATUS='Active'
------------

Environment will now switch to UTF-8 code-set.
Parts of this log file may not display correctly
as a result.  This is an expected behavior.     

 XML_REPORTS_XENVIRONMENT is : 
/u01/IGAUPGT/IGAUPGTora10222/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb

 XENVIRONMENT is set to  /u01/IGAUPGT/IGAUPGTora10222/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb


 Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8

'.,'

REP-3000: Internal error starting Oracle Toolkit.

Report Builder: Release 6.0.8.28.0 - Production on Tue Apr 3 03:10:17 2012

(c) Copyright 1999 Oracle Corporation.  All rights reserved.

Enter Username: 
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+


+---------------------------------------------------------------------------+
Executing request completion options...

+------------- 1) PUBLISH -------------+
Beginning post-processing of request 20244749 on node IGLDW at 03-APR-2012 03:10:21.
Post-processing of request 20244749 failed at 03-APR-2012 03:10:23 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
+--------------------------------------+

+------------- 2) PRINT   -------------+
Not printing the output of this request because post-processing failed.
+--------------------------------------+


Finished executing request completion options.

+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 03-APR-2012 03:10:23
{\Code}

Thanks
Thiliban

Tk2Motif_UTF8. RGB is used to form xmlp report

so
Please read the mos above and related mos inside

I can't post here mos - violation

Demand is complted with warning
Hi all

My concurrent request was completed with warning.
I have not found logfile errors

Please help me how do to trobleshut.

Thank you
Hello

This worked before? If so, the changes have been made recently?

Please see if these documents help.

Choose the report sheet complete with warning [ID 375541.1]
Take exit Srs (WSHPSRS) ends with a warning. [784683.1 ID]
During the release of Pick not all lines are allocated / storage when there is enough quantity [ID 1070600.1]
FAQ: Troubleshooting version stuck Pick and shipment of Transactions [ID 863761.1]

Thank you
Hussein

MSASCui.exe failed 0 x 80000003 & Windows defender User Interface has stopped working

I can't update windows and spybot will not run. AVG says no active components. When I restarted I got this MSASCui.exe message the application failed if initialize properly (0 x 80000003) click ok to complete the application. Then I got the message that Windows Defender user interface has stopped working. Also earlier while trying to ask this question box in my speakers one ad for Charmin and part of a kind of talk show or something. It also happened just before I open IE to ask this question. PLEASE ADVISE!

I thought that this update last night, but I guess no, here is what microsoft online malware remover found

Exploit Java/CVE-2008-53
c:\users\diana\appdata\locallow\sun\java\deployment\cache\6.0\3\12a49b83-322e820c
c:\documentsandsettings\diana\appdata\locallow\sun\java\deployment\cache\6.0\3\12a49b83-322e820c
MYF/y/appletx. Class

Trojan:Java / Selace.A
c:\users\diana\appdata\locallow\sun\java\deployment\cache\6.0\3\12a49b83-322e820c
c:\documentsandsettings\diana\appdata\locallow\sun\java\deployment\cache\6.0\3\12a49b83-322e820c
MYF/y/loaderx. Class

Trojan:Java / Selace.B
c:\users\diana\appdata\locallow\sun\java\deployment\cache\6.0\3\12a49b83-322e820c
c:\documentsandsettings\diana\appdata\locallow\sun\java\deployment\cache\6.0\3\12a49b83-322e820c
MYF/y/payloadx. Class

Earlier, I heard another ad for the outdoor channel. Help, please!

I have Vista I know makes a difference in what I do.

It looks like something very funky happening with your Internet Explorer program. It looks much like malware to me, but if you ran several scans with different products, then that may not be the case. You can try several above - but you probably won't find anything (but you might--sometimes a virus is very sneaky and that one or two anti-malware programs are able to deal with them).

Since it seems to be a problem with Internet Explorer, I suggest that repost you your question (with a link to this topic so that they will know what's already been tried) to the Forum of Internet Explorer http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/threads where people who specialize in issues of IE will be happy to help you with your problem.

Good luck! Lorien - a - MCSE/MCSA/network + / A +.

How can I stop blue screen with stop error code (0x00000002, 0x00000000, 0x804e70ed)

How can I stop blue screen with error code stop 0 x 00000050 (0xf05c371c, 0 x 0, 00000002 00000000, 0x804e70ed)

If you are not real tied to the current installation of Windows - then a cloth and then reinstall are the best way to see if you can fix this

Here's a suggestion on how to do a 'clean ': install
[quote]
For testing purposes, it is best to install Windows "clean".
It is, basically, install the way that Microsoft intended (with the drivers from Windows Update).
This procedure is for Windows 7, Vista is similar (but has 2 service packs)

You will need your installation/recovery DVD (s) before you start. Once you wipe the hard drive, there is no going back!

1 back up all your data.
It will wipe everything off of your hard drive, so what you want to keep should be backed up elsewhere.

NOTE: If this is due to an infection, remember to analyze the data with current antivirus to another system to locate and remove malware.

2. connect the system to the internet (if the system shows then disconnect from the Internet, do).

3. use one of these free utilities to wipe the hard drive:
DBAN ( http://www.dban.org/download )
KillDisk ( http://www.killdisk.com/downloadfree.htm ).
This will also remove the system recovery partitions - so the installation/restore DVD is essential!

4 install Windows by booting from the installation/recovery DVD - DO NOT change any settings!

5 visit Windows Update and get all updates

6. check device for all unknown/disabled devices Manager - if there are unknown disabled devices, secure them with the latest drivers from the website of the manufacturer of the device (not the PC manufacturer)

7 visit Windows Update and download the Service Pack 1 (normally under important updates). Read these notes for installing SP1: http://support.microsoft.com/kb/2505743

8 visit Windows Update and get any other available updates

9 download, install and update a free antivirus, so it does not get infected during the test ( http://www.carrona.org/freeav.html ).

If problems persist, then the problem is probably with your hardware.

Warning: If you have an Asus motherboard, check the date on the file C:\Windows\System32\driver\ASACPI.sys. 2004/2005 is a problem, 2009,2010 is OK. Updates are available on the Web from Asus site.

Warning: If you have a Sony system, make sure that you do NOT have the 2007 version (or earlier) Extension of Firmware of Sony Analyzer (SFEP.sys). To update this driver immediately!
[/ quote]

Printing status window Interface has stopped working

I have a new computer with Windows 8 and an old printer Dell720. I found a driver and the printer works with the new computer. The printer was working without any problems, when I received the message "the Print status window Interface has stopped working". I also had a "Low Ink" pop-up window.

Any help to solve this problem would be appreciated.

OK, I found a way to deal with my problem. Apparently the problem centered around the printer sends a message to the computer that the ink cartridge is low on ink. I said to the computer I installed a new print cartridge (but I do not actually have) and now the printer works.

Interface travel Stop - SRS complete with warning

Similar Questions

Maybe you are looking for