Interleaving of tables

Similar Questions

• How to clone items in a 1 d array?

  I have a table with unique values from elements such as [1,2,3] and I want to convert it to the format [1,1,2,2,3,3]

  I am using a loop with 2 account but for some reason it says that I have too many dimensions.

  My image is attached.

  There is a simple primitive, Interleave 1 table D who would do this for you.

  Hope that works!

  

• Interleaving of samples: two outputs analog (tables with different lengths)

  CHAN                   AOCHANNEL1       AOCHANNEL2       AOCHANNEL1           AOCHANNEL2       .. .and so on
  
  SAMP                   * * * * *           *              * * * * *              *           .............and so on

  Hi guys, how could I go on the interlacing of two arrays of different lengths in a two-channel analog output?

  In the illustration above, for example, I like to write 5 values in channel 1, followed a string of unique value 2 and so on...

  I use DAQmx library controls to achieve this (not LabView).

  I am able to write unique values each time a task is opened without any problem, I was wondering if I can interleave the berries so that values are buffered and tasks are performed with greater haste.

  best regards,

  Ravi

  target met: I've made the following changes:

  CREATION OF TASK 1
  
  CREATION ANALOG_VO channel 1 & channel 2 in TASK 1
  
  CONFIG. CALENDAR OF TASK 1
  
  CREATED some TENSION with SAMPLES interleaved pre
  WRITING TASK 1 VALUES
  TASK 1 STARTED

  
  
  DAQmxCfgSampClkTiming(taskHandle1,"",SAMPLING_RATE,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps,2*SAMPLE_SIZE_WX)
  
  
  

• Implementation of the shift from table register

  Hi all

  I am a novice in Labview and I'm trying to implement entrelaceur Convolutional.

  I have a problem with the implementation of the shift register using tables.

  Here I use interleaver in channel 4. First bit should go directly to the output. 2nd bit should go in a shift register which is initialized to 0. 0 should go to the exit and entry should replace the registry of offset value.

  Similarly, in the 3rd round, 2 element shift register is present initialized to 0. Here, too, 0 should go to the exit element (0) first should get input should come in the shift register. And in the 4th inning, 3 element shift register will be there.

  I tried to apply this using tables, but I'm not be able to crack. Using loops with disabled automatic indexing is the key to this?

  Your help to solve this will be highly appreciated.

  Thank you

  Try something like this:

  

• Intertwining of the tables on FPGA

  Hello

  I am trying to interleave 1 3 tables for writing a FIFO DMA on an FPGA, but I can't make it work properly. When I try 2 1 tables it of ok, but with 3 elements are not properly interlaced and the result is that all 1 3 bays are mixed up.

  I tried to use the interleave with 3 entrances and gives the mixed result, and I also tried to striping and striping 2 tables then the 3rd in this table. It works better that at least I get 2 tables properly interlaced, but the 3rd one is missing. For the test I used 3 sine waves each of a different magnitude, but the same frequency, using the input function 3 the result is a sine wave in a sine wave. 2, interlacing and then the 3rd in this table are reflected in three waveforms good but table 2 and 3 are identical.

  According to the help, it is possible to use the interleave on an FPGA at the entrance and the results are tables 1 d, which combines 3 1 the tables should be, I think...?

  I tested the service in a standard vi and it worked fine so the question is of course to the fact it's on an FPGA, but this is because of the FIFO, the function interleave or something else?

  The material is a 7856R if that makes a difference.

  See you soon,.

  Darren.

  
  

• Reshuffle / Interleave 2D Array

  Hey guys,.

  Background information for the context:

  I know that the answer to this is somewhere out there, but so far I could not enter the right key words.  I set up a routine of analysis where I compare the monthly values by a category in which there are two "buckets" of information by month.  At the end of the day, this is all plotted on a graph to compare values from month to month.

  The question at hand:

  I built a 2D array that I want to interpolate a lot as a 1 d array.  If I [x, y] structure where I want to interpolate the second half of the first, which is the fastest way to do it?  That is to say, my values would be in the form [0, x / 2, 1, x / 2 + 1] while the values there would remain no mixed.  (Many as a kind of function in Excel where you sort by a single column and each value rearranges the sort column-based.)

  I'm not a computer scientist, but attempted (probably bad) using notation appropriate to help convey what I'm looking for, but if I didn't, please ask and I can clarify.  I hope to do this as effectively as possible, because these tables can be very large.  I'm also a big fan of the MGI, OpenG, GPower, pallets etc, so if there is something already developed I can use, I'm all for it.

  Thanks for the help.

  Thank you for the responses guys.  I appreciate your thoughts and you have answered my question exactly as I had asked her.

  I was however very confused by the answers and trying to interpriate them properly.  Whelp, it turns out that I messed up my language by not being is not a CS.  I would have had to say that I am looking for a method of striping (not interpolate) table 2D by row or column.  I think I need to divide the table into two (remembering in my case there will always be an even number of indices), and then interleave the lines there.  I can foresee doing similar to the code below, but I'm sure that's not effective and is not adjusting well when my paintings become very large.

  Any thoughts you have on this design would be greatly appreciated.

  

  (Note: Green Subvi is OpenG reorganize table)

• Question about full scan of the Table and Tablespaces

  Good evening (or morning).
  
  I read the Concepts of Oracle (I am new to Oracle) and it seems that, based on the way in which Oracle allocates and manages the storage of the local the following is true:
  
  Principle: A table which is often accessible by using a full table scan (for some reason any) would be better resident in its own dedicated tablespace.
  
  The main reason I came to this conclusion is that when you perform a full table scan, Oracle doesn't diluvium IO, reading probably one step at a time. If datafile (s) of storage space only contain data for a single table, then a reading series will have to skip segments containing the data in the other tables (as is the case if the tablespace is shared with other tables). The performance improvement is probably low, but it seems that there is a very similarly.
  
  I wish I had the thoughts of DBA experienced about the assumption above.
  
  Thank you for your contribution,
  
  John.

  a reading series will not jump the segments that contain data from other tables

  You are referring to a misleading picture of the operation.

  Let's say 'A' table is a table among a number of tables in a tablespace that consists of one or more data files.
  Since this is one of the many tables, it may not start at the beginning of a data file. His first measure may be somewhere in the middle of the file. The next step may not be nearby with the first step. The 3rd degree can be in different data file.
  So, it's the picture where you see Oracle having to jump the other tables when you do a FullTableScan.

  Now, view the same image:
  Measure 1 is in the 1000 to the 1127 block block (IE 128 blocks) in the data file 6
  Measure 2 is the 2400 block 2527 block in the data file 6
  3 is to the block to block 9371 9245 in datafile 12

  How Oracle does not have a FullTableScan? It starts with the segment header to get a map of the extent (it would read UET$ in a dictionary managed tablespace). He knows now what degrees it should read.
  What is doing?

  He made a call to the operating system to read 1000 blocks Oracle 1127 in the data file 6.
  The operating system then translates this call to starts and ID ranges and the block of the file system.
  The operating system puts this request to the storage subsystem.
  The storage subsystem and then translated the BONE, ID, blockrange to the drive starts, track, sector.
  Assume that these are all the neighbor on the single disc (that is, the volume is not distributed over multiple LUNS and disks).
  Storage reads the information and sends it to the operating system. This can still mean multiple readings, because the head (or several heads because the disc is made up of several trays) does not read 1 MB in an "appeal".
  The operating system then collects the 1 MB and passes it to Oracle.
  Oracle then fills buffers in its cache buffers--(PS: Astuce!) Tip! (: don't you know that it will be not be neighbor memory locations?)
  Microseconds past milliseconds.
  The disc is still spinning (it stops ). It has "evolved" - a different set of blocks are now under the read head.

  Oracle is now asking the OS for blocks of 2400 to 2527 in the data file 6.
  Oracle did not to "jump the other tables. He just made a separate call to the OS with a new range of blocks.
  The operating system now translates the block ID and filenumber at its own mapping.
  Storage then made his translation.
  The disc under the head blocks are very (almost certain) to be a different from blocks together. Not even those corresponding to 1128 Oracle Oracle datafile block 6. Not even the ones corresponding to 2400 block Oracle in Oracle data files.
  We are suffering now fetch - and reading the disk.

  and the story continues...

  And what happens if there is finally another user on the same system? Between the first blocks 1000-1127 call and the second call to blocks 2400-2527, that other user requested blocks 2000 (IE made a call from reading one piece).
  And, after the second measure is read by the user FullTableScan, a third user has requested block 2048 in a single block read call.

  It is important that the Table is not in the neighbor extensions? Even if you did put the table in "adjacent areas" they are not likely to be contiguous on the disk. Even if they are nearby on the disk, they are not likely to be able to read without delay, because the disc has passed.
  And we have not even spoken interleaving where readings from multiple disks need to be coordinated.

  So why still prefer 1Mo diluvium readings in Oracle? Because most SOAs allow a single OS call of up to 1 MB. Therefore, the overhead of Oracle making a call to read 1 MB are experienced only once. If the operating system allowed a maximum of 256KB reads diluvium, even a reading of 1 MB measurement must be carried out as 4 separate calls to the OS (and, recursively, 4 separate calls to the OS for the storage subsystem). We try to reduce the number of calls from software that we do. We cannot reduce the time of access and reading (but allows us to achieve more high "parallelism" in readings striping).

  Hemant K Collette
  http://hemantoracledba.blogspot.com

• That the face is lit mode bedside table may be shortened? He remains too bright for too long

  That the face is lit mode bedside table may be shortened? He remains too bright for too long.

  Hello

  No, it is not currently possible to customize the duration for which the screen remains lit mode bedside table.

  If you want to send feedback or feature requests to Apple, you can do so here:

  https://www.Apple.com/feedback/watch.html

• Table of contents for several sheet file...?

  It is possible to:

  1. Create a Table of contents listing all sheets in a file?
  2. Have these hyperlink worksheet titles to the sheets themselves?

  I build what will eventually be a fairly large file (read: 75 + leaves). Rather than scrolling all the leaves one by one by one manually to locate the correct table, it would be useful to have a table of contents or an Index that lists the in order... Ideally, allowing the connection of hypertext link to the leaves they reference. (I swear that this was part of a way-back-when number...)

  Instead, is it possible to auto-trier worksheets in alphabetical order? He would not give me the project view as a table of contents or an Index of 35,000 feet, but at least it would be a little easier to find what it takes.

  Looking forward to sharing the wisdom...

  HI stephanie,.

  The numbers 2 (' 09) and 3 support not the hyperlinks to locations within the current document. Both take in charge of hyperlinks that open a Web page in your default browser or which will open and send a new e-mail message.

  Command-F can be your friend here.

  Place an array of single cell on each sheet (or use a cell on the existing table). Enter a short text string that identifies the table or sheet. Each string must be unique in the document.

  To access the card containing one of the following strings:

  Press Control + F to open the Find dialog.

  Enough chain to identify the worksheet type.

  Number will draw this roadmap forward as soon as it can determine which table contains the cell containing this string.

  Tested with four sheets containing:

  able, baker, charlie and delta

  With this limit together (and any other tables in the document - quite an artificial situation!), type c or d was enough to bring me to sheet 3 or 4, sheets 1 and 2 required two letters (ab or ba) to identify the good sheet and bring it forward.

  

  

  With a document containing several tables (and more leaves), create (and remembering) a separate channel for each becomes more complicated.

  You can place a second copy of each in a table of Index or table of contents on a separate sheet. From the index table,

  Copy the entry for the table/worksheet you want to go.

  Open the dialog to find (command-V)

  Paste the entry in the search box. (What it will find and highlight the entry that you have copied to the index table)

  Click on the > button on the dialog to find the occurrence FOLLOWING this string (on your target table.

  Kind regards

  Barry

• Automate the cells of the filter to another table based on two columns

  Hello

  What I'm trying to do is: filter multiple cells to a new table. In this example, I want that all students (column 'lidnr', 'city', then the first 7 columns) with 1 teacher in the 'First' column to be copied into the table 'teacher 1'. The same goes for students per 1 teacher in the column "second". I know it can be done with the help of the filter and the copy paste, but I would like to know if this can be automated, because there are many more tables in my actual document.

  

  

  I've been using maybe to think the search formula but he can't give me more than one result, the result must be unique.

  Thank you very much for your help.

  Kind regards

  Kim

  Hi Kim,

  The usual way to do this is to add an index for each table for which column the data is to be copied.

  Here is an example of preliminary. Improvements after return from the light of day.

  

  Triangles of error on the last row of T1 are thanks to the formula out of data to search for. Easily fixed.

  Order of the names is different from your example, which is grouped by day numbers. Build lists in the desired order, rethinking the index calculations.

  Course index calculations use the formula below, entered in Table 1::L2 and thre to the rest of the blue full cells filled.

  L2: = IF (OR (RIGHT($H2,1) = RIGHT (L$ 1.1) RIGHT($J2,1) = RIGHT (L$ 1.1)), MAX(L$1:L1) + 1"," ")

  Data recovery on the Table T1 is well done by the following formula, entered in A2 and down and B2 and filled and down-filled.

  A2: = INDEX (array 1::A, CORRESPONDENCE (LINE (−1, 1 Table): $L, 0))

  B2: = INDEX (array 1::B, CORRESPONDENCE (LINE (−1, 1 Table): $L, 0))

  More tomorrow (actually, later today).

• Need help with table

  I have a spreadsheet that has about 40 different sheets with each of them being a person that lists information about each of them and if they participated in a given event.

  Is there a way to create a table that spans all of the leaves and can show participation based on the event? A bit like a portal into a database. My struggle is to be able to drag the formula down to automatic change sheets. I don't want to have to individually type an if then formula with offset to connect the number for each field.

  You mention a portal on a database. I think you're on the right track. It is easier to gather information in a table that it is from the dozens of tables. Why not keep your data in a database table and 'extract' information for a person of this table.

  If you could give more details one you are trying to do someone here will be able to give more specific suggestions.

  SG

• How to change the default alignment of text in the cells in a table on the demand for numbers?

  I'm new to Mac. I own a MacBook pro MF839HN/A and currently using the 3.6.2 release NUMBERS (2577). I want to know if I can change the default alignment of text in the cell in a table of NUMBERS application? Also, when I select all the cells in a table to change their alignment, I can only change the horizontal alignment of the text and not the vertical alignment. To change the vertical alignment of the text in a cell, I have to select them individually. Help me with two questions.

  The only way I know is to create a table that is set up as you like, then save the empty document as a template customized by using the menu item "file > save as template:

  

• iBooks author - TOC shows the empty entries for table - how to stop this?

  Hello

  I spent hours trying to find an answer to this.

  My book has a few tables - nothing wrong with that.  I have a front cap of the table - that's what I want in the table of contents.

  iBooks author shows instead, empty entries whenever he comes across a table, that is hopeless.

  

  I just want the topic as indicated above - 2.1.  I don't want 2.2 which is the table.

  Does anyone have an idea how to do this, please?

  If this isn't the case, iBooks author is desperate for any book that contains the tables.

  See you soon,.

  Mike

  Hello

  I found an article from Apple which may help to answer your question and I pasted the link below. I think that you will have to 'say' iBA this is or is not part of the Table of contents (TOC) and's done it with the Inspector tool, Document tab, section TOC. Look down at the bottom of this window to the sign and arrow down to allow the addition of other document settings in the table of contents, or remove some.

  I hope that this help =)

  iBooks author: Customize the table of contents

  

• Match color of series for a table and a chart?

  I created a table with 4 sets of data.  Then, I created a graphic line with this information.  I noticed that when I select the line graph the data in the table becomes highlighted with a lighter version of colors used in the chart.  Each series Gets a corresponding really nice color to match the graph.  As soon as you select any where else these colors disappear.

  Is there a way to automatically match line chart series color color of the card?  If this isn't the case, I see this as the colors that appear in the table so that I can put in manually?

  Select the series by clicking on the graph, then any "point":

• Table of contents don't link to pages in a doc Pages

  Info entry:

  1. a .pages document
  2. blank template
  3. presentation of two columns

  The problem:

  Table of contents generated refuses to do interactive links to the corresponding pages. Styles is ok (so that's why I was able to compose the TOC).

  What is the problem and how to operate?

  4.2 pages (iWork ' 09)

  The document itself (a link to download, editable).

  https://drive.Google.com/file/d/0Bwsy7q2Qc3TCOElPVG02TWFqV3c/view?USP=sharing

  I forgot to mention that my document consists of many sections. While my other document that has its main contents in a cot, a great section working very well in this regard, for example, I am able to go to any title by clicking an appropriate fake (the pointer is active as opposed to the doc above).

  Much appreciate any input on this.

  Thank you

  I.S.