Internet Auth users simultaneous connections by Cisco WLC 5508?

Hello

We have 2 WLC5508 (7.2.111.3) with multiple SSID.

One of them is configured as Passthrough with an external boot server. Works very well.

Now, we want to use the "failure of MAC filtering on.

If the client MAC address is configured under filtering MAC on the WLC, authentication is done without WebAuth.

If the MAC address is not known, the client will be redirect to the external WebAuth server for authentication.

To preserve the functionality of relay for the user, we have hard coded a username & password in the start page.

Thus, each customer WebAuth uses the same user name & password for authentication against the WLC.

Strategies of user login is set to unlimited.

So far so good, it seems to work, but I've read that the controllers of Cisco 5500 supports only 150 concurrent connections to Auth users.

The two WLC have abount 100-170 clients connected.

Question:

-It's going to be a problem with 150 connections simultaneous, despited when the not usin only one user for all customers-Wifi?

-L' user WebAuth is possible with a Cisco ISE as Passthrough, no username & password must be entered by the user.

If so, some guide information wolud be great.

-When it is properly authenticated, a logout screen shows on the Windows client. Can he hide some how?

Thanks for the replies ;-)

Kind regards

Norbert

Its probably a limitation to the treatment of patients with the same credentials.  I never ran into a questions, but how many comments will complain, if they hit the button to accept a few seconds after :)

Thank you

Scott

Help others using the system of rating and marking answers questions like "answered."

Tags: Cisco Wireless

Similar Questions

  • Cisco WLC 5508 & HP printer

    Hello

    I have some problems with cisco and hp airprint wlan systems.

    I use two cisco wlc 5508, a master and an anchor.

    the APs ar connectet to master wlc, DHCP and the point of diversion to the internet are on anchor wlc.

    so far, with my android phone, I can connect and hepatitis has access to the internet.

    now, I use an HP Multifunction (MFP M276nw) printer with Airprint. I connect to the WLAN even the hp printer on the same IP range.

    I can ping the printer from my android tablet, but I can never find the printer with a hp soft.

    If I connect the printer even with the same compressed to a point of user access to home normal is all ok thing.

    I think I have to configure something on my wlcs.

    any ideas?

    Thank you

    It seems that v7.5 supports Hello on anchor. You might want to look at this thread

    https://supportforums.Cisco.com/thread/2200019

    Sent by Cisco Support technique iPhone App

  • authenticate the cisco WLC 5508 with cisco ACS 1120 (version 5.0) using GANYMEDE +.

    My installation has cisco WLC 5508 and ACS 1120 ver 5.0. How to authenticate users who access to the WLC via the ACS 1120 users GANYMEDE +. I am able to authenticate users for routers and cisco switches, but when I try the same for the CMT, it fails.

    Can someone explain please the config/basic steps that must be configured on both services ACS & WLC.

    You use plain vanilla 5.0 or have installed patches?

    the ACS 5.1 has new GANYMEDE related functionaity, including support for custom services and attributes. If they are necessary for the WLC yo need support it would improve.

    He could also relevant corrective patch from calendar 5.0 but I can't find any relevant specific at this stage CDETS

  • How Anyconnect VPN users will connect with cisco ASA, which uses the server (domain controller) Radius for authentication

    Hi team

    Hope you do well. !!!

    currently I am doing a project which consists in CISCO ASA-5545-X, RADIUS (domain controller) server for authentication. Here, I need to configure Anyconnect VPN and host checker in cisco asa.

    1 users will connect: user advanced browser on SSL VPN pop past username and password.

    2. (cisco ASA) authentication: VPN sends credentials to the RADIUS server.

    3 RADIUS server: authentication: receipt and SSL VPN (ASA) group.

    4 connectivity creation: If employee: PC so NAW verified compliance, no PC check Assign user to the appropriate role and give IP.

    This is my requirement, so someone please guide me how to set up step by step.

    1. how to set up the Radius Server?

    2. how to configure CISCO ASA?

    Thanks in advance.

    Hey Chick,

    Please consult the following page of installation as well as ASA Radius server. The ASA end there is frankly nothing much difference by doing this.

    http://www.4salesbyself.com/1configuring-RADIUS-authentication-for-webvp...

    Hope this helps

    Knockaert

  • SHIFT of Mode on Cisco WLC 5508

    Hello

    I have two WLC 5508 working in ACTIVE / standby. They are connected to my local network by linking to each WLC.

    I would like to implement the LAG Mode to have two WLC link but when I activate LAG Mode (Mode CONTROLLER/general/LAG at the next reboot active), I have this newspaper:

    "Error in the setting of the Mode of LAG. Please see the log file.

    I see nothing in the log file.

    The version of my WLC is 8.0.100.0

    Thank you

    First, you will need to disable HA if you want to enable the LAG.

    http://www.Cisco.com/c/en/us/TD/docs/wireless/controller/8-0/Configuration-Guide/b_cg80/b_cg80_chapter_010100001.html

    A time LAG configured on both controllers, you can then enable HA between two WLCs

    HTH

    Rasika

    Pls note all useful responses *.

  • Migration of Cisco WLC 5508 to 5520

    Hi all

    I need to migrate cisco 5508 to 5520 wlc. This Cisco 5508 WLC is in production, it is possible, I can import this 5508 configuration file and export again 5520.

    Please provide the steps to follow while making the migration.

    (1) how cisco WLC-2 AP WLC-1 transfer since both have the same versions of IOS. Any URL available Cisco?

    WLC-2, enter the command "config primary ap .

    (2) applicant tried to transfer 2 points of access for LAP 1130 2 WLC WLC - 1 2 days back but still not reflective in WLC - 1. Measures to solve the problems there?

    Distance or console in the AP.  Post the output of the command 'sh' full record when trying to move the access of a controller to another point is entered.

  • Cisco ISE 1.2 & Cisco WLC 5508 v7.6

    Hi all

    We intend to upgrade our WLC to 7.6 to fix a bug with FlexConnect customer ACL but I just saw on the ISE Cisco compatibility table which it recommended only up to the WLC 5508 v7.5...

    Cisco told me to avoid 7.5 as it is in a State of defferred if anyone know or are running in a laboratory or production, ISE1.2 with a WLC v7.6 n 5508?

    I wish I knew rather questions of people know before hand than to have to go through a software update, and then restore.

    Thank you all

    Mario Rosa

    Definitely stay away from 7.5. I've done several deployments with the WLCs 7.6 running. The two main issues that I touched were:

    CSCue68065 - in this bug FlexConnect ACL does not work unless you have a regular (non FlexConnect) ACL created with exactly the same name

    CSCuo39416 - CWA does not not on FlexConnect APs. It would apply to you if you have older models APs

    I hope this helps!

    Thank you for evaluating useful messages!

  • Error: "connection attempt timed out, please check the connectivity of the internet" when trying to connect to Cisco AnyConnect 2.5 on Windows 7 x 64 computer with modem usb wireless HSIA.

    Original title: issue with Cisco AnyConnect 2.5 on win 7 x 64 when connecting to the internet using wireless HSIA usb modem.

    I have win 7 x 64 enterprize edition on my laptop.

    I have problems with Cisco anyconnect VPN client. When I'm on my corporate network it works fine.

    But when I connect to internet using HSIA modem usb wireless home form, client AnyConnect VPN will not connect. The error I get is "connection attempt has expired, please check internet connectivity.

    Please help me to solve this problem as soon as possible.

    Hi Manish,

    The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet forums for assistance.

    I also recommend that you contact the VPN support to help:

    https://supportforums.Cisco.com/community/NetPro/security/VPN

  • Cisco WLC 5508 password invalid? (Fixed! Thank you)

    Hi guys,.

    This afternoon, I did a few tests in WLC in our network wireless company.

    However, after my 3-hour test, I tried to connect new WLC by GUI and SSH. The username admin and the password doesn't work any more. In read-only and guest account did not work as well.

    Is that someone has had this problem before? Is there a restriction on access to the CMT 3 hours or a day? Moreover, I do not have any password change.

    Thank you

    Well well... something has changed on the WLC for this to happen.  That you were testing?  Changes in the configuration of your RADIUS and allows management or priority may cause you a problem if things are not set up right.  If that is the case, dissconnect the WLC on the network and connect to your service port or the console port and the connection.

    If you are unable to open a session, here is a link for how to do a recovery of password on the WLC:

    https://supportforums.Cisco.com/docs/doc-8038

  • License of Cisco WLC

    Hi all

    Could someone help me, I have Cisco WLC 5508 with details of license as the photo below as a status "in use".  My question can I used another license with inactive status?

    5508 as the 2504 can only use licenses that have been purchased and installed or if eval has not expired. If you exceed the number of licenses of AP, then you need to activate the eval, if not expired. You will not be able to do both. The newer controllers who have the right of use license, you would be able to do.

    -Scott

    Please evaluate the useful messages *.

  • Cisco NAC appliance - after a success does not change users to connect to the vlan propper

    Hello

    I am new to cisco NAC BURNERS and I have to troubleshoot an implementation. It is a real OOB IP gateway configuration. Users can connect to the Pentecost the CCA, but after the connection of this success, they remain on the role not authenticated, as well as on this vlan. I checked the SNMP protocol and seems to work very well. Also, I checked the logs on nac_manager.log and there is nothing surprising, in fact I see nothing about this user or IP address that connects.

    Also the user does not appear on the list of users online on cam.

    Can someone help me figure out how can I fix? version 4.8, I'll post any information requested

    Thank you

    We recently had the problem with Windows AD SSO and Windows 7 clients.

    Would authenticate the XP clients very well, however, Windows 7 clients would not authenticate and will remain just on the authenticated vlan.

    Our question was looking for CASE SSO account, we installed on AD. It only support the encryption, WHICH has no Windows 7 64. We turned off "Use OF THE encryption" on the account authentication UNIQUE AD and re-tested.

    What are the parameters of the port-profile to which is applied the switchport?

    What is the map settings vlan ports trunk not approved or confidence?

  • Trouble getting a Cisco 2600 series AP to stay connected to WLC 5508

    Hello

    I recently loaded the independent our old APs upgrade to LWAPs.  We have a WLC 5508 to our Virtual Co - Lo and I use Flexconnect to accommodate local switch and dhcp on our sites.  I have updated more than 50 APs and joined them to the controller.  These include only the 1130AG and 1240AG models.  However they work perfectly and stay connected to the controller.  I'm having is with a new batch of 2600 series APs stay connected to the controller.  I tried to do research in what may cause disconnect it but have yet to find a solution.  I use DNS to resolve queries for CAPWAP & LWAPP APs to the controller on our EXTENSIVE network.  Read other messages I thought that this is perhaps a problem with packages to drop but have had our provider that manages Sonicwalls at both ends of the WAN confirm for me that there is no packet loss.  Here are the logs that I collected through the puttty of the WLC & AP.  Any help would be greatly appreciated.

    AP, I do the test on:

    NAME: "AP2600', DESCR: 'Cisco Aironet 2600 Series (IEEE 802.11n) Access Point.

    PID: AIR-CAP2602I-A-K9, VID: V01, SN: FTX1740J8V1

    WLC in question:

    Name of the manufacturer... Cisco Systems Inc..

    Product name... Cisco controller

    Version of the product... 7.3.112.0

    Bootloader Version... 1.0.1

    Retrieving Image Version field... 6.0.182.0

    Firmware version... Console USB 1.3, 1.6 Env FPGA, 1.27

    Build Type....................................... DATA + WPS

    System name... wificontroller

    Location of the system... Corp

    Contact System... Net engineer

    ObjectID of system... 1.3.6.1.4.1.9.1.1069

    Redundancy mode... People with disabilities

    IP Address....................................... 10.250.32.8

    Last Reset....................................... Software reset

    Time system... 190 days 3 hours 34 minutes 24 seconds

    Location of the time zone of the system... (GMT - 5:00) Eastern (USA and Canada)

    The country is set... USA - United States

    Operating environment... Utilities (0 to 40 ° C)

    Limits the internal temperature alarm... 0 to 65 ° C

    -Other - or ITU (q)

    ... Internal temperature 38 C

    Outdoor temperature... + 20 C

    Fan Status....................................... Ok

    State of 802. 11 b network... Activated

    State of 802. 11A network... Activated

    Number of wireless LANs... 14

    Number of Active Clients... 71

    Built-in MAC address... C8:9 C: D: 8 1: 52:E0

    Power supply 1... Currently, OK

    Power supply 2... Absent

    Maximum number of taken access points supported... 100

    Here is the result which leaves on concluded that the AP joins the WLC for a short period and then goes offline

    WT-4thFlr-AP3 #.

    * 15:42:04.419 Dec 14: % 3-CAPWAP-ERRORLOG: County of Retransmission for package exceeded max (CAPWAP_WTP_EVENT_REQUEST

    ., 3)

    * 15:42:11.443 Dec 14: EVT-4-AVT %: write flash: / done event.capwap

    * 15:42:11.483 Dec 14: LWAPP-3-CLIENTERRORLOG %: switch to standalone mode

    * 15:42:11.487 Dec 14: % 3-CAPWAP-ERRORLOG: dating BACK to the DISCOVERY of FASHION

    * 15:42:11.487 Dec 14: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 10.250.32.8:5246

    * 15:42:11.571 Dec 14: % FEDS-6-persons with DISABILITIES: Signature of IDS is removed and disabled.

    * 15:42:21.575 Dec 14: % 3-CAPWAP-ERRORLOG: MWAR selected ' wificontroller'(index 0).

    * 15:42:21.575 Dec 14: % 3-CAPWAP-ERRORLOG: go join a capwap controller

    * 15:42:12.000 Dec 14: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.250.32.8 peer_port: 5246

    * 15:42:14.303 Dec 14: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 10.250.32.8 peer_port: 5246

    * 15:42:14.303 Dec 14: % CAPWAP-5-SENDJOIN: send request to join 10.250.32.8

    * 15:42:15.127 Dec 14: "Promiscuous" from Ethernet mode

    * 15:42:15.535 Dec 14: LWAPP-4-CLIENTEVENTLOG %: OfficeExtend Localssid recorded Flash AP

    * 15:42:15.667 Dec 14: ac_first_hop_mac - IP:10.1.2.250 Hop IP:10.1.2.250 IDB:BVI1

    * 15:42:15.667 Dec 14: AC setting hop first MAC: 0017.c575.a23c

    * 15:42:15.855 Dec 14: % CAPWAP-5-JOINEDCONTROLLER: AP joined controller wificontroller

    * 15:42:15.911 Dec 14: LWAPP-4-CLIENTEVENTLOG %: No. Flex ACL to load map configuration file. To connect to the controller to get the configuration file

    * 15:42:15.911 Dec 14: LWAPP-4-CLIENTEVENTLOG %: No. Flex ACL to load map configuration file. To connect to the controller to get the configuration file

    * 15:42:15.911 Dec 14: LWAPP-4-CLIENTEVENTLOG %: map No. LS Flex to load ACL configuration file. To connect to the controller to get the configuration file

    * 15:42:15.915 Dec 14: LWAPP-4-CLIENTEVENTLOG %: no central Dhcp configuration file map to load. To connect to the controller to get the configuration file

    * 15:42:15.915 Dec 14: % LWAPP-3-CLIENTERRORLOG: connected mode

    * 15:42:23.639 Dec 14: FEDS-6-ACTIVATED %: Signature of IDS is loaded and enabled

    * 15:42:34.615 Dec 14: CLEANAIR-6-State: Slot 0 disabled

    * 15:42:34.615 Dec 14: CLEANAIR-6-State: Slot 1 disabled

    * 15:45:43.783 Dec 14: % 3-CAPWAP-ERRORLOG: County of Retransmission for package exceeded max (CAPWAP_WTP_EVENT_REQUEST

    (. 11).

    * 15:45:43.787 Dec 14: LWAPP-3-CLIENTERRORLOG %: switch to standalone mode

    * 15:45:43.787 Dec 14: % 3-CAPWAP-ERRORLOG: dating BACK to the DISCOVERY of FASHION

    * 15:45:43.787 Dec 14: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 10.250.32.8:5246

    * 15:45:43.867 Dec 14: % FEDS-6-persons with DISABILITIES: Signature of IDS is removed and disabled.

    * 15:45:53.867 Dec 14: % 3-CAPWAP-ERRORLOG: MWAR selected ' wificontroller'(index 0).

    * 15:45:53.867 Dec 14: % 3-CAPWAP-ERRORLOG: go join a capwap controller

    * 15:45:44.000 Dec 14: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.250.32.8 peer_port: 5246

    * 15:45:46.315 Dec 14: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 10.250.32.8 peer_port: 5246

    * 15:45:46.315 Dec 14: % CAPWAP-5-SENDJOIN: send request to join 10.250.32.8

    * 15:45:46.487 Dec 14: "Promiscuous" from Ethernet mode

    * 15:45:49.903 Dec 14: LWAPP-4-CLIENTEVENTLOG %: OfficeExtend Localssid recorded Flash AP

    * 15:45:50.031 Dec 14: ac_first_hop_mac - IP:10.1.2.250 Hop IP:10.1.2.250 IDB:BVI1

    * 15:45:50.031 Dec 14: AC setting hop first MAC: 0017.c575.a23c

    Here are the results of the client debugging capwap event about to access:

    WT-4thFlr-AP3 #debug capwap customer event

    Display debugging EVENT customer CAPWAP is on

    WT-4thFlr-AP3 #.

    * 15:54:58.335 Dec 14: % 3-CAPWAP-EVENTLOG: Echo interval has expired.

    * 15:54:58.335 Dec 14: % 3-CAPWAP-EVENTLOG: sending package to AC

    * 15:54:58.335 Dec 14: % 3-CAPWAP-EVENTLOG: echo sent to 10.250.32.8 request

    * 15:54:58.343 Dec 14: % 3-CAPWAP-EVENTLOG: reset reTransmissionCnt to 0

    * 15:54:58.343 Dec 14: % 3-CAPWAP-EVENTLOG: queue empty.

    * 15:54:58.343 Dec 14: % 3-CAPWAP-EVENTLOG: echo response from 10.250.32.8

    * 15:55:08.000 Dec 14: % 3-CAPWAP-EVENTLOG: setting the time at 15:55:08 UTC 14 December 2013

    * 15:55:25.579 Dec 14: % 3-CAPWAP-EVENTLOG: sending package to AC

    * 15:55:25.587 Dec 14: % 3-CAPWAP-EVENTLOG: reset reTransmissionCnt to 0

    * 15:55:25.587 Dec 14: % 3-CAPWAP-EVENTLOG: queue empty.

    * 15:55:25.587 Dec 14: % CAPWAP-3-Journal of EVENTS: event Wtp 10.250.32.8 response

    * 15:55:25.827 Dec 14: % 3-CAPWAP-EVENTLOG: sending package to AC

    * 15:55:25.835 Dec 14: % 3-CAPWAP-EVENTLOG: reset reTransmissionCnt to 0

    * 15:55:25.835 Dec 14: % 3-CAPWAP-EVENTLOG: queue empty.

    * 15:55:25.835 Dec 14: % CAPWAP-3-Journal of EVENTS: event Wtp 10.250.32.8 response

    * 15:55:55.835 Dec 14: % 3-CAPWAP-EVENTLOG: Echo interval has expired.

    * 15:55:55.835 Dec 14: % 3-CAPWAP-EVENTLOG: sending package to AC

    * 15:55:55.835 Dec 14: % 3-CAPWAP-EVENTLOG: echo sent to 10.250.32.8 request

    * 15:55:55.843 Dec 14: % 3-CAPWAP-EVENTLOG: reset reTransmissionCnt to 0

    * 15:55:55.843 Dec 14: % 3-CAPWAP-EVENTLOG: queue empty.

    * 15:55:55.843 Dec 14: % 3-CAPWAP-EVENTLOG: echo response from 10.250.32.8

    * 15:55:56.000 Dec 14: % 3-CAPWAP-EVENTLOG: setting the time at 15:55:56 UTC 14 December 2013

    * 15:56:25.735 Dec 14: % 3-CAPWAP-EVENTLOG: sending package to AC

    * 15:56:25.743 Dec 14: % 3-CAPWAP-EVENTLOG: reset reTransmissionCnt to 0

    * 15:56:25.743 Dec 14: % 3-CAPWAP-EVENTLOG: queue empty.

    * 15:56:25.743 Dec 14: % CAPWAP-3-Journal of EVENTS: event Wtp 10.250.32.8 response

    * 15:56:25.983 Dec 14: % 3-CAPWAP-EVENTLOG: sending package to AC

    * 15:56:25.991 Dec 14: % 3-CAPWAP-EVENTLOG: reset reTransmissionCnt to 0

    * 15:56:25.991 Dec 14: % 3-CAPWAP-EVENTLOG: queue empty.

    * 15:56:25.991 Dec 14: % CAPWAP-3-Journal of EVENTS: event Wtp 10.250.32.8 response

    * 15:56:55.991 Dec 14: % 3-CAPWAP-EVENTLOG: Echo interval has expired.

    * 15:56:55.991 Dec 14: % 3-CAPWAP-EVENTLOG: sending package to AC

    * 15:56:55.991 Dec 14: % 3-CAPWAP-EVENTLOG: echo sent to 10.250.32.8 request

    * 15:56:55.999 Dec 14: % 3-CAPWAP-EVENTLOG: reset reTransmissionCnt to 0

    * 15:56:55.999 Dec 14: % 3-CAPWAP-EVENTLOG: queue empty.

    * 15:56:55.999 Dec 14: % 3-CAPWAP-EVENTLOG: echo response from 10.250.32.8

    * 15:56:56.000 Dec 14: % 3-CAPWAP-EVENTLOG: setting the time at 15:56:56 UTC 14 December 2013

    Here are the results of debug capwap client package in detail:

    WT-4thFlr-AP3 #.

    * 14 Dec 15:59:01.823: <   start="" of="" capwap="" packet ="">>

    * 15:59:01.823 Dec 14: control of CAPWAP mesg sent to 10.250.32.8, Port 5246

    * 15:59:01.823 Dec 14: Type Msg: CAPWAP_ECHO_REQUEST

    * 15:59:01.823 Dec 14: Msg length: 0

    * 15:59:01.823 Dec 14: Msg SeqNum: 44

    * 14 Dec 15:59:01.823: <  end="" of="" capwap="" packet ="">>

    * 14 Dec 15:59:01.831: <   start="" of="" capwap="" packet ="">>

    * 15:59:01.831 Dec 14: mesg 10.250.32.8 Recd, Port 5246 CAPWAP control

    * 15:59:01.831 Dec 14: HLEN 2, Radio ID 0, WBID 1

    * 15:59:01.831 Dec 14: Type Msg: CAPWAP_ECHO_RESPONSE

    * 15:59:01.831 Dec 14: Msg length: 15

    * 15:59:01.831 Dec 14: Msg SeqNum: 44

    * 15:59:01.831 Dec 14:

    * 15:59:01.831 Dec 14: Type: CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, length 11

    * 15:59:01.831 Dec 14: the vendor identifier: 0 x 00409600

    * 15:59:01.831 Dec 14:

    * 15:59:01.831 Dec 14:

    IE: UNKNOWN IT IS ABOUT 151

    * 15:59:01.831 Dec 14: IE length: 5

    * 15:59:01.831 Dec 14: decode the routine unavailable, Hex Dump printing

    * 15:59:01.831 Dec 14:

    52 80 46 00 AC

    * 14 Dec 15:59:01.831: <  end="" of="" capwap="" packet ="">>

    * 14 Dec 15:59:20.931: <   start="" of="" capwap="" packet ="">>

    * 15:59:20.931 Dec 14: mesg 10.250.32.8 Recd, Port 5246 CAPWAP control

    * 15:59:20.931 Dec 14: HLEN 2, Radio ID 0, WBID 1

    * 15:59:20.931 Dec 14: Type Msg: CAPWAP_CONFIGURATION_UPDATE_REQUEST

    * 15:59:20.931 Dec 14: Msg length: 93

    * 15:59:20.931 Dec 14: Msg SeqNum: 38

    * 15:59:20.931 Dec 14:

    * 15:59:20.931 Dec 14: Type: CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, length 89

    * 15:59:20.931 Dec 14: the vendor identifier: 0 x 00409600

    * 15:59:20.931 Dec 14:

    * 15:59:20.931 Dec 14:

    IE: RRM_NEIGHBOR_CTRL_PAYLOAD

    * 15:59:20.931 Dec 14: IE length: 83

    * 15:59:20.931 Dec 14: decode the routine unavailable, Hex Dump printing

    * 15:59:20.931 Dec 14:

    00 0 HAS FA 20 08 01 00 07 0A 20 08 03 00 01 FA F4

    01 00 00 3 B4 2ND 2ND 06 94 51 79 25 C7 B2 B4 E7

    22 FD BE F6 04 00 00 00 00 00 00 00 00 50 52 4F

    53 2D 57 69 46 69 00 00 00 00 00 00 00 00 00 00

    00 00 00 00 00 00 00 00 00 00 00 00 00 01 06 0B

    01 01 01

    * 14 Dec 15:59:20.931: <  end="" of="" capwap="" packet ="">>

    * 14 Dec 15:59:20.931: <   start="" of="" capwap="" packet ="">>

    * 15:59:20.931 Dec 14: control of CAPWAP mesg sent to 10.250.32.8, Port 5246

    * 15:59:20.931 Dec 14: Type Msg: CAPWAP_CONFIGURATION_UPDATE_RESPONSE

    * 15:59:20.931 Dec 14: Msg length: 8

    * 15:59:20.931 Dec 14: Msg SeqNum: 38

    * 15:59:20.931 Dec 14:

    * 15:59:20.931 Dec 14: Type: CAPWAP_MSGELE_RESULT_CODE, length 4

    * 15:59:20.931 Dec 14: result of Code: CAPWAP_SUCCESS

    * 14 Dec 15:59:20.931: <  end="" of="" capwap="" packet ="">>

    * 14 Dec 15:59:21.139: <   start="" of="" capwap="" packet ="">>

    * 15:59:21.139 Dec 14: mesg 10.250.32.8 Recd, Port 5246 CAPWAP control

    * 15:59:21.139 Dec 14: HLEN 2, Radio ID 0, WBID 1

    * 15:59:21.139 Dec 14: Type Msg: CAPWAP_CONFIGURATION_UPDATE_REQUEST

    * 15:59:21.139 Dec 14: Msg length: 111

    * 15:59:21.139 Dec 14: Msg SeqNum: 39

    * 15:59:21.139 Dec 14:

    * 15:59:21.139 Dec 14: Type: CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, length 107

    * 15:59:21.139 Dec 14: the vendor identifier: 0 x 00409600

    * 15:59:21.139 Dec 14:

    * 15:59:21.139 Dec 14:

    IE: RRM_NEIGHBOR_CTRL_PAYLOAD

    * 15:59:21.139 Dec 14: IE length: 101

    * 15:59:21.139 Dec 14: decode the routine unavailable, Hex Dump printing

    * 15:59:21.143 Dec 14:

    01 0 TO FA 20 08 01 F4 00 07 0A 20 08 00 01 0C FA

    01 00 00 3 B4 2ND 2ND 06 94 51 79 25 C7 B2 B4 E7

    22 FD BE F6 04 00 00 00 00 00 00 00 00 50 52 4F

    53 2D 57 69 46 69 00 00 00 00 00 00 00 00 00 00

    00 00 00 00 00 00 00 00 00 00 00 00 00 24 28 2

    30 34 38 3 40 95 99 9 01 01 01 01 01 01 01 A1

    01 01 01 01 01

    * 14 Dec 15:59:21.143: <  end="" of="" capwap="" packet ="">>

    * 14 Dec 15:59:21.143: <   start="" of="" capwap="" packet ="">>

    * 15:59:21.143 Dec 14: control of CAPWAP mesg sent to 10.250.32.8, Port 5246

    * 15:59:21.143 Dec 14: Type Msg: CAPWAP_CONFIGURATION_UPDATE_RESPONSE

    * 15:59:21.143 Dec 14: Msg length: 8

    * 15:59:21.143 Dec 14: Msg SeqNum: 39

    * 15:59:21.143 Dec 14:

    * 15:59:21.143 Dec 14: Type: CAPWAP_MSGELE_RESULT_CODE, length 4

    * 15:59:21.143 Dec 14: result of Code: CAPWAP_SUCCESS

    * 14 Dec 15:59:21.143: <  end="" of="" capwap="" packet ="">>

    * 14 Dec 15:59:25.547: <   start="" of="" capwap="" packet ="">>

    * 15:59:25.547 Dec 14: control of CAPWAP mesg sent to 10.250.32.8, Port 5246

    * 15:59:25.547 Dec 14: Type Msg: CAPWAP_WTP_EVENT_REQUEST

    * 15:59:25.547 Dec 14: Msg length: 14

    * 15:59:25.547 Dec 14: Msg SeqNum: 45

    * 15:59:25.547 Dec 14:

    * 15:59:25.547 Dec 14: Type: CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, length 10

    * 15:59:25.547 Dec 14: the vendor identifier: 0 x 00409600

    * 15:59:25.547 Dec 14:

    * 15:59:25.547 Dec 14:

    IE: RRM_LOAD_DATA_PAYLOAD

    * 15:59:25.547 Dec 14: IE length: 4

    * 14 Dec 15:59:25.547: slot ccaLoad 0 rxLoad 0 txLoad 0 33

    * 14 Dec 15:59:25.547: <  end="" of="" capwap="" packet ="">>

    * 14 Dec 15:59:25.555: <   start="" of="" capwap="" packet ="">>

    * 15:59:25.555 Dec 14: mesg 10.250.32.8 Recd, Port 5246 CAPWAP control

    * 15:59:25.555 Dec 14: HLEN 2, Radio ID 0, WBID 1

    * 15:59:25.555 Dec 14: Type Msg: CAPWAP_WTP_EVENT_RESPONSE

    * 15:59:25.555 Dec 14: Msg length: 0

    * 15:59:25.555 Dec 14: Msg SeqNum: 45

    * 14 Dec 15:59:25.555: <  end="" of="" capwap="" packet ="">>

    * 14 Dec 15:59:25.795: <   start="" of="" capwap="" packet ="">>

    * 15:59:25.795 Dec 14: control of CAPWAP mesg sent to 10.250.32.8, Port 5246

    * 15:59:25.795 Dec 14: Type Msg: CAPWAP_WTP_EVENT_REQUEST

    * 15:59:25.795 Dec 14: Msg length: 14

    * 15:59:25.795 Dec 14: Msg SeqNum: 46

    * 15:59:25.795 Dec 14:

    * 15:59:25.795 Dec 14: Type: CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, length 10

    * 15:59:25.795 Dec 14: the vendor identifier: 0 x 00409600

    * 15:59:25.795 Dec 14:

    * 15:59:25.795 Dec 14:

    IE: RRM_LOAD_DATA_PAYLOAD

    * 15:59:25.795 Dec 14: IE length: 4

    * 14 Dec 15:59:25.795: slot ccaLoad 1 rxLoad 0 txLoad 0 0

    * 14 Dec 15:59:25.795: <  end="" of="" capwap="" packet ="">>

    * 14 Dec 15:59:25.803: <   start="" of="" capwap="" packet ="">>

    * 15:59:25.803 Dec 14: mesg 10.250.32.8 Recd, Port 5246 CAPWAP control

    * 15:59:25.803 Dec 14: HLEN 2, Radio ID 0, WBID 1

    * 15:59:25.803 Dec 14: Type Msg: CAPWAP_WTP_EVENT_RESPONSE

    * 15:59:25.803 Dec 14: Msg length: 0

    * 15:59:25.803 Dec 14: Msg SeqNum: 46

    * 14 Dec 15:59:25.803: <  end="" of="" capwap="" packet ="">>

    * 14 Dec 15:59:30.375: <   start="" of="" capwap="" packet ="">>

    * 15:59:30.375 Dec 14: mesg 10.250.32.8 Recd, Port 5246 CAPWAP control

    * 15:59:30.375 Dec 14: HLEN 2, Radio ID 0, WBID 1

    * 15:59:30.375 Dec 14: Type Msg: CAPWAP_CONFIGURATION_UPDATE_REQUEST

    * 15:59:30.375 Dec 14: Msg length: 17

    * 15:59:30.375 Dec 14: Msg SeqNum: 40

    * 15:59:30.375 Dec 14:

    * 15:59:30.375 Dec 14: Type: CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, length 13

    * 15:59:30.375 Dec 14: the vendor identifier: 0 x 00409600

    SlotId: 0

    Mobile Mac Addr: BC:52:B7:E3:17:CB

    * 14 Dec 15:59:30.375: <  end="" of="" capwap="" packet ="">>

    * 14 Dec 15:59:30.375: <   start="" of="" capwap="" packet ="">>

    * 15:59:30.375 Dec 14: control of CAPWAP mesg sent to 10.250.32.8, Port 5246

    * 15:59:30.375 Dec 14: Type Msg: CAPWAP_CONFIGURATION_UPDATE_RESPONSE

    * 15:59:30.379 Dec 14: Msg length: 8

    * 15:59:30.379 Dec 14: Msg SeqNum: 40

    * 15:59:30.379 Dec 14:

    * 15:59:30.379 Dec 14: Type: CAPWAP_MSGELE_RESULT_CODE, length 4

    * 15:59:30.379 Dec 14: result of Code: CAPWAP_SUCCESS

    * 14 Dec 15:59:30.379: <  end="" of="" capwap="" packet ="">>

    * 14 Dec 15:59:30.387: <   start="" of="" capwap="" packet ="">>

    * 15:59:30.387 Dec 14: mesg 10.250.32.8 Recd, Port 5246 CAPWAP control

    * 15:59:30.387 Dec 14: HLEN 2, Radio ID 0, WBID 1

    * 15:59:30.387 Dec 14: Type Msg: CAPWAP_WTP_EVENT_RESPONSE

    * 15:59:30.387 Dec 14: Msg length: 0

    * 15:59:30.387 Dec 14: Msg SeqNum: 47

    * 14 Dec 15:59:30.387: <  end="" of="" capwap="" packet ="">>

    * 14 Dec 16:00:00.387: <   start="" of="" capwap="" packet ="">>

    * 16:00:00.387 Dec 14: control of CAPWAP mesg sent to 10.250.32.8, Port 5246

    * 16:00:00.387 Dec 14: Type Msg: CAPWAP_ECHO_REQUEST

    * 16:00:00.387 Dec 14: Msg length: 0

    * 16:00:00.387 Dec 14: Msg SeqNum: 48

    * 14 Dec 16:00:00.387: <  end="" of="" capwap="" packet ="">>

    * 14 Dec 16:00:00.395: <   start="" of="" capwap="" packet ="">>

    * 16:00:00.395 Dec 14: mesg 10.250.32.8 Recd, Port 5246 CAPWAP control

    * 16:00:00.395 Dec 14: HLEN 2, Radio ID 0, WBID 1

    * 16:00:00.395 Dec 14: Type Msg: CAPWAP_ECHO_RESPONSE

    * 16:00:00.395 Dec 14: Msg length: 15

    * 16:00:00.395 Dec 14: Msg SeqNum: 48

    * 16:00:00.395 Dec 14:

    * 16:00:00.395 Dec 14: Type: CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, length 11

    * 16:00:00.395 Dec 14: the vendor identifier: 0 x 00409600

    * 16:00:00.395 Dec 14:

    * 16:00:00.395 Dec 14:

    IE: UNKNOWN IT IS ABOUT 151

    * 16:00:00.395 Dec 14: IE length: 5

    * 16:00:00.395 Dec 14: decode the routine unavailable, Hex Dump printing

    * 16:00:00.395 Dec 14:

    52 80 81 00 AC

    * 14 Dec 16:00:00.395: <  end="" of="" capwap="" packet ="">>

    Try reducing the mtu on ap 2600.

  • Oracle ebs multiple simultaneous, locks, the user cannot connect to app.

    We known aircraft crash yesterday afternoon, Oracle EBS app users cannot connect in the app. We noted the very strong 70 to 90% charge in the Grid control and several blocks, a work of rman always running and a job of running stats. However looks after killing an app report dbms_scheduler job, we have solved the problem.

    But this morning, we see still cpu load on the grid of control operations and 70% all huge red and simultaneous locks.

    I like all the gurus here help me to start how to diagnose in Oracle ebs.


    I would like to start from beginning.

    As the links I can read what you have to look inside the database? on the hosts?


    Thanks to a bouquet.

    Among the names of objects, looks like this is a custom query that is managed by a custom concurrent request, if you need to know that you and tune the code.

    Thank you

    Hussein

  • Multiple simultaneous connections to a secure area with the same id/password user

    I was wondering if someone can answer this.

    We are creating a secure member area - there will be 3 area secure, air-conditioned and equipped with identical conent - a (one-time) 3 day trial, monthly subscription (recurring) and annual subscription (recurring).

    The user logs in the generic secure area.

    At this point, we can have multiple simultaneous connections with the same credentials in the secure area user - I was expecting it to be like the administration area where you get hunted if someone else logs into your account.

    Is there a way to limit the number of simultaneous connections with the same ID and password to a secure area (generic)?

    See you soon

    Pat

    This is actually a bug that they re not for awhile. If you connect to another place he should expel you from the other source of security.

  • WLC 5508 cannot have the same user twice!

    Much of community support.

    I had users on drives of 440 x a Cisco WLC. Some service accounts have been recorded several times with the same AD account.

    Given that I have them migrated on the new controller (5508), it seems that we can not have the same user AD several times.

    I changed the Radius Server with the one we used on the old x 440, but the situation seems to be the same.

    I checked the error message when you try to start a second connection similar they looks like:

    * Dot1x_NW_MsgTask_4: 24 August 14:04:51.558: % DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:3062 identity Max EAP request attempts (3) exceeded for client xxxxxxxxxxx

    * Dot1x_NW_MsgTask_4: 24 August 14:04:51.558: % DOT1X-3-ABORT_AUTH: 1x_bauth_sm.c:447

    Abandoned for xxxxxxxxxxx client authentication

    If I move back to the other 440 x similar connections are allowed without any problem.

    Could you tell me where I should look to fix this?

    Thanks for your help,

    Concerning

    P.S. We use certificates with users.

    Make sure that Max concurrent connections for a user name is set to 0 for unlimited.  You can set the with a value of 1 to 8.

Maybe you are looking for

  • OMEN: HP Omen control does not work.

    Hello Until the last HP Support Assistant, HP Omen control was perfectly fine. But after the update, control Omen HP has no control over what anyone. It does not change the keyboard functions, lighting of keyboard, fan speed or f-buttons. How can I s

  • New Apple ID for phone associated with a different id of people

    My iPhone is currently associated with Apple ID my wife rather than me. I think that it is at the origin of the storage problems that I continually get messages "not enough available storage" even though I have deleted several photos and apps that I

  • cancel the desktop settings

    I've been messing around with the desktop settings and I don't like setting that I put. Now I don't know how to restore the old settings. How can I cancel the settings I have now in my previous? Oh and I change just as the pointer of the mouse, the d

  • Third party software to be used as an endpoint

    Hello all, can anyone recommend a software (a free software is recommended) it can be used to record with VCS and express VCS. I need this software for test purposes. I also prefer if I can use this software as a standalone endpoint (without registra

  • Bug on 15.2 (2) E

    PS - FAN falls to the have GOT status after IOS update. CSCuo97298 I found this question exist on the version 15.2 (2) E so I downgraded to 15.2 (1) E3 and the problem disappeared.