Internet recovery installation Mavericks not El Capitan

Hello

I am trying to reinstall OS X of the recovery of the Internet. I had been running El Capitan, but when I boot to the recovery of the Internet, it installs the Mavericks.

I can easily update from here, but I'm trying to understand why this happens? It will always return to the operating system that comes originally on the computer? Or is there a way to change this?

Thank you!

It is supposed to return to the origin of the computer OS.

(138214)

Tags: Mac OS & System Software

Similar Questions

  • installation problem, not connected to the internet or the time is not on internet time sync

    I downloaded a trial of adobe acrobat, when I tried to install, he manages to tell a newspaper on the internet, or time is not sync to the internet, but my computer is on the internet and, also, I have zero time to synchronize the internet time.

    Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  • After new OS installation can not see all the devices connected on satellite

    I recently reformatted the computer because I had a lot of problems, after doing so I tried to connect to the internet, on that I just plugged the ethernet cable, the light on the modem was flashing and I opened the network connections, but the network device was not there. e.g. connection to the LAN 1, etc.

    I also have another problem. I opened the Device Manager and could not see any of the connected devices.
    can anyone help?

    HI Kamal,

    If you have reinstalled just your system from the recovery CD then you will also need to re - install one of your devices (including your Internet connections) installation CD that came with them.

    The recovery CD contain only the Windows base operating system, as well as the software provided to Toshiba and to my knowledge, this does not include the ISP software or connections.

    Kind regards

  • Published: Recovery Partition do not have day

    I posted this under Yosemite, instead of El Capitan - very sorry.

    I ran updates on iMac 10.11.6 10.11.5

    The update has not changed the recovery partition, it is still at 10.11.5

    Ran 10.11.6 combination update, still do not update to recovery partition.

    What should I do to get my recovery partition in harmony with my primary OS version?

    Thank you!

    What makes you think that your recovery partition is not up-to-date?

  • No problem of reclassification of Maverick in El Capitan

    Must what members experience reclassification of Mavericks at El Capitan? It is worth?

    Reclassification of Mavericks in El Capitan, this isn't a problem. Whether or not it is worth depends on what you like and if you need the features provided by El Capitan, which is not provided by the Mavericks.

    However, make sure that your applications are compatible. At least 4Gig memory. If you intend to continue using iPhoto, make sure that you update to the latest version 9.6.1.

    IF you have another disk, you might install on test and try it first. It is perhaps the best way to go.

    Anyway, have a good Time Machine backup in case you want to restore.

  • Body of the email missing after the upgrade of the Mavericks in El Capitan

    I upgraded from the Mavericks to El Capitan today and although my Inbox lists my emails in a column on the left, the body of the message is missing. I have double-clicked on the messages and still get nothing. In addition, all of my sent mail disappeared and there is that nothing that is listed. I checked the pane accounts and my account is activated and all others are disabled. Any help would be appreciated.

    Try the following:

    1. Abandonment of post
    2. Move ~/Library/Containers/com.apple.mail to the desktop.
    3. Restart the messaging
    4. If Mail is not working properly, remove the com.apple.mail you had previously moved on the desktop.
  • Recovery CD is not repeated? Satellite A80

    Hello

    I have a Toshiba Satellite A80. It came with 2 CDs a recovery CD and a "CD for additional software.

    My intention was to format the pc, but I've had problems.

    When I boot the recovery CD, there are 3 options: "Delete all Partitions", "Crush the Installation" and "Uninstall Express Media Player". I tried all these options, but none of them install windows XP, which is what it was preinstalled. When I start the laptop from the hard drive, it says "not found operating system"

    I hope I can get help here.

    Thank you!!

    Are you sure that you have started since the right recovery CD?
    You must start from the Toshiba OS recovery CD and not from the Express Media Player recovery CD!

    Don't mix the two CDs!

  • Recovery facility does not engage on Satellite L850D

    Hello

    as my PC still locked after 10 minutes (surfing on the net, use of Ms office,...) Finally, I decided to reinstall Windows and made a record of recovery facility. Indeed, remove all software (office, Chrome,...) and reinstall it did not solve anything
    I reinstalled and noted installation was indeed very slow (hours) until he stopped at stage 47 of 47. Wait again for if long step 47 in the end, he didn't move at all.

    I rebooted, and then asked for an administrator password to WIndows7. How can I know, I didn't create any user.

    Then I restarted in safe mode, where I could create a user with administrator rights (if did not create a password for it)
    Then I could log on, but he again immediately on screen Toshiba Leading Innovation above windows again stuck again at stage 47/47. No movement at all new.

    So I decided to lower-level security the lowest level regarding ' when the software is installed you are not asked to leave.
    Indeed, the stage 47, then ends.
    But then, I get another step of the installation with the comment "of worden systeemprestaties nu geclassificeerd. It's the Dutch version, which means "Systemprestations are now classified."
    I am progressing a little, but after about 10 seconds, it stops and the progress bar does not continue. Automatically restarts windows and sometimes not help waiting hours. He leaves with execution step 47 of 47, going back to "Systemprestations are now classified", but always stucks there yet.

    I don't really see a solution, please help me.

    As Windows 7 is pre-installed, I have no CD/DVD official WIndows7 and cannot rely on the Toshiba recovery tools.
    I would expect Toshiba Recovery does all the work...

    Even if you are not a professional IT guy, the recovery process is not really complicated...

    Usually, you must boot from the recovery disk and have to follow the instructions on the screen... that's all...

    I also got my two laptops Toshiba repeatedly and never questions had mentioned in your message... in similar cases, I recommend always repeat the recovery procedure or check the hardware parts; for example the HARD drive...

  • Satellite A30 - 203 - recovery disk does not work

    Hi all

    I have an old Satellite A30-203 and have a problem. I tried to format my laptop but the product recovery cd does not seem to work in deletion the data on my disk, its becomes blocked during loading files of ntfs? Now I am not able to retrieve a windows session would I need a new product recovery cd and would be able to get it?

    Thank you

    Hi dimation,

    It is difficult to say what is the reason of this but made is either it s a laptop problem itself or the recovery disc (e.g. scratches) causes this problem.

    In my opinion the best way to check this using a Microsoft Windows disk. If the installation completed successfully, you need a new recovery disk. As a result, you can ask a service provider authorized in your country! :)

  • Satellite A50 - recovery disk is not working

    Hello

    I'm trying to do a clean install on my laptop, but the recovery disk is not working.
    The files transferred to the laptop, but once done, I get an error message that says: "the system is not fully installed. Please run Setup again."

    Does anyone have suggestions as to how to fix it?

    It took me four days to get to this point and make me very frustrated.

    Thanks heaps

    Naomi

    Hello

    What is the installation using another CD; That is to say the Microsoft Windows XP disk?
    Have you tried that?

    In my opinion, this would help to pinpoint the problem
    The error message can be linked to different issues; I mean the HARD drive or a single partition problem could also be possible.

    Try to format the drive HARD whole again. Delete all partitions from the HARD drive and check if you can proceed with the installation.

    But if you will not be able to install the OS by using the recovery disk and other disks then a question must relate to a part of the material. (possibly HDD)

  • New Satellite L300-IBV - Windows installation has not been completed.

    Computer Satellite L300-IBV brand new.
    When it is lit (for the first time) the screen informed me that there were a little closed and the windows installation was not completed.

    It asks me to click ok, and then restart the installation.
    When I click ok, the screen darkens and then reappear with the same message.

    Help, please!

    Hello

    try to start your laptop with F8 and choose the first option. To fix my computer. When Vista system recovery options are shown, please choose the last option in recovery Toshiba. Run it and follow the menu on the screen.

    I hope that you will be able to install Vista using the Toshiba recovery image.

    Please post the result.

  • My seagate drive external drive keeps ejecting properly after installation of OS El Capitan

    My seagate external hard drive keeps ejecting properly after installation of OS El Capitan, it locks also towards the top and turns off, the ext drive when using, I have to restart my IMac 27 inches.  I have two ext hd who does very well for years before the installation of the operating system El Capitan

    If you have installed the Seagate Software, please delete and see if there is no change.

    Any third party software that is not installed on the App Store or by drag-and - drop in the Applications folder and uninstall by drag - move to the trash, is a modification of the system.

    Whenever you delete changes to the system, they must be eliminated completely, and the only way to do this is to use the uninstall tool, if any, provided by the developers, or follow their instructions. If the software has been removed incompletely, you may redownload or reinstall even to finish the job.

    I never install modifications of the system myself, and except as stated in this comment, I do not know how to uninstall them. You'll have to do your own research to find this information.

    Here are some general guidelines to help you get started. Suppose you want to remove the so-called "BrickMyMac" (a hypothetical example). First of all, menu using the product, check if there is one, for instructions. Not finding here, look at the Web site, let's say www.brickmymac.com. (Maybe it's not the name real site, if necessary, search the Web for the name of the product). If you don't find anything on the Web site or in your search, contact the developer. While you are waiting for a response, download BrickMyMac.dmg and open it. There may be a request here as "Uninstall BrickMyMac." If this is not the case, open "BrickMyMac.pkg" and look for an uninstall button. The uninstall program can also accessible by clicking on the button customize, when one exists.

    Back up all data before making any changes.

    Generally, you will need to restart the computer in order to perform an uninstall. Until you do this, there may be no effect, or the unpredictable effects.

    If you can't remove the software in any other way, you will have to erase and install OS X. Never install any third party software, unless you're sure you know how to uninstall in the contrary case, it can create problems which are very difficult to solve.

    Try to remove the complex system of changes by hunting for files by name, often will not work and can make the problem worse. The same goes for 'utilities' as the 'AppCleaner"designed to remove software.

  • Internet ex 8 is not takeing a upgrade, 8024200d error code

    Internet ex 8 takeing not an upgrade; IE 8 is on and works but will not take it is a high grade? Why? the 8024200d error code

    Hi jamesfhoagland,

    Thank you for using answers Forum.

    You know that day is it?
    Their generally referenced by a KB as KB947562 article.
    If you can find the update, you can try to download the Setup file and install it manually.

    You can also run the Installer Cleanup utility.
    Here's an article on it:

    http://support.Microsoft.com/kb/290301

    Give that a try and let us know how it works.

    Chris
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Update to Internet Explorer 8 is not

    I received notification of update Windows for IE 8. He failed, and the message says that it was a virus is possible; no virus detected. When I returned to redownload IE 8, the message shown installation could not continue because a newer version is found, what I don't understand. How can I now download IE 8?
    Thank you!

    Hi schweizer,.

    Please read: "How TO solve IE8 installation problems:
    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/9c5f373e-7667-4D6C-AA10-84185dccf887

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    Hope this helps,

    Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop Experience & security - since 2003. ~ My Blog: http://blogs.dotnethell.it/vincent/

  • ENVY 15 3040 nr recovery disc does not

    Hello

    I made a recovery disk set as soon as I bought my ENVY 15. I accidentally deleted all partitions, then tried to recover by using the disks that I did... but I get this error by...

    The system recovery media does not support this computer.

    You are not able to restore the system with the media.

    0110 A9P60UA #ABA - A9P58UA #ABA

    Help, please!

    Hello

    Assuming that it's just a problem with the recovery media, here's another solution, you can try.

    Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

    An example of a COA label can be seen here.

    You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

    Windows 7 sp1-iso-official-32-bit-and-64-bit

    Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

    http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

    All pilots additional and the software, you may need can be found here.

    Kind regards

    DP - K

Maybe you are looking for

  • Black screen on Satellite A300D when the lid is closed

    When I close my Satellite A300D the monitor turns off, of course. But when I open it again the screen remains black. I can hear everything is working normally (Windows Vista 32 bit). Can someone help me? Johannes

  • MTBF PXI

    Hello I am looking for the MTBF of the following references: PXI-8119 PXI-6713 PXI-4071 PXI-6511 PXI-6512 PXI-6513 Thank you for your help,

  • The image reference

    Hi Expert Vision, I just started tinkering with the module Vision and think it's very nice. A rookie question I had, with a picture (for example from a grab IMAQdx) reference, I have to connect through all functions, or is permitted to use only the f

  • Phone calls from fraud

    I got a phone call from a woman saying she was with Microsoft.  She wanted me to turn on my computer, but I told her I was busy and to call back at 1 pm PST.  How can I tell is that this is not Microsoft?  What should I do?

  • Impossible to uninstall kntcr, he said that it is still running

    I'm trying to uninstall kntcr from my computer and it keep saying that he always running.i tried to uninstall it but it doesn't work. I went on the right side of the screen and went to the clock icon and uncheck the Start button and load and then ret