Recovery facility does not engage on Satellite L850D

Similar Questions

• Recovery disk does not work on Satellite Pro P10-304

  A few days ago my Satellite P10-304 is not start, so I used recovery CD and got the machine works like new.
  Yesterday it wouldn't boot.
  Some thing on an ethernet cable unplugged error message, so I tried recovery CD because there is no data to lose.
  It won't work, to come up with an error message "GDISK (E) no such fixed disk - 1" then "error number 11030, invalid destination drive.

  Can anyone help me to get it booted/recovered please?
  I'm not fussed on something special for this old laptop, just a second computer for the kids to do their homework on.

  Hmm. sounds like a HARD drive failure
  Have you checked if the HARD drive has been recognized in the BIOS?

  > Something on an Ethernet cable unplugged error message.
  I guess you get an error PXE - E61 starting at startup.
  This message appears if the laptop tries to boot from LAN.

  This could happen if there are no other sources of boot as HARD drive, etc.

• Recovery disk does not work for Satellite A100-197

  I'm working on an A100-197, which would not boot into normal Windows, but was able to start in safe mode.
  I used MSConfig to disable all startup and other services. Not good.
  I used the system restore. Not good.
  I have scanned for viruses, rootkits, etc. None found. Not good.
  I copied data to another hard drive in SafeMode with network and inserted the recovery DVDs.
  Through unpacking and got message saying to remove DVD - did this and system seems to freeze.
  Click the exit button and it restarts, but Windows froze (the movement stopped moving blobs). Tried safe mode
  but got a message saying that the installation of the system has not finished.
  Tried the recovery again, but this time I left the unpacking screen 100% of the overnight to see if
  He has nothing. There can be no. Click on exit and got the same as above.
  HDD formatted in partition magic and I tried again. Not good.
  Created 5 GB FAT32 partition and DVD files copied to the FAT32 partition. Tried to run the decompression program
  back. He refused to run in DOS mode.
  I think that connects the hard drive on another machine and RecoUnpack.exe a work PC running to
  unzip the files on the laptop HARD drive image, but this is crazy - the recovery disk is supposed to retrieve the
  System. What else can I try?

  GMC

  I would say that you have some serious hardware malfunction. Have you ever tried to check the RAM and the processor?
  In your case, I would try to run the UBCD4Win (www.ubcd4win.com) and superPI allows to see if the RAM is faulty.

  It could also be another component such as the motherboard or something on the motherboard (graphics, sound, some capacitors)

  It s just a suggestion, but you could really give my hint a chance. ;)
  I would also try another HARD drive in this machine, maybe the controller from your old HARD drive disappeared...

  Welcome and appreciate all comments

  Dennis

• Recovery facility does not

  G62-340US.  I bought the HP recovery discs.  The #3 disk (Windows 7 Home Premium Home installation), it proceeds through the installation, but eventualy produces an error message: "Windows cannot complete the installation.  To install Windows on this computer, run the Setup again. "I press 'OK', he goes back to the top and the same thing happens. Again and again...   Either with the disc in the drive and not in the reader.

  I guess I bought the correct recovery disks, and I do not have chhanged all the material on the laptop.  The wipe clean recovery process HD, so there is no possibility of a corrupted file (from front) get in the way of installing Windows.

  I'm stuck!

  Hello

  Here is another solution, you can try.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation of Windows 7 'detail' disc yourself using another PC - just download the good Disk Image ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium 64 - bit ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  The source of the Windows Image is Digital River.

  Windows 7 Home Premium 64 bit SP1.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• Satellite A30 - 203 - recovery disk does not work

  Hi all

  I have an old Satellite A30-203 and have a problem. I tried to format my laptop but the product recovery cd does not seem to work in deletion the data on my disk, its becomes blocked during loading files of ntfs? Now I am not able to retrieve a windows session would I need a new product recovery cd and would be able to get it?

  Thank you

  Hi dimation,

  It is difficult to say what is the reason of this but made is either it s a laptop problem itself or the recovery disc (e.g. scratches) causes this problem.

  In my opinion the best way to check this using a Microsoft Windows disk. If the installation completed successfully, you need a new recovery disk. As a result, you can ask a service provider authorized in your country! :)

• For 1000-zx satellite recovery disk does not work

  XP Recovery disk does not work. The 3 options are unresponsive. Is there an easy solution. All other functions of cell phones seem ok. It is a reliable machine for more than 3 years, but now must use the recovery disc. Brilliant ideas greatly appreciated.

  Hello

  Well, I put t know why you recovery CD doesn t work. Have you checked the CD some scratches? Have you tried to clean this CD?
  However if it of impossible to use the recovery CD, you can contact the ASP and buy a new one. It doesn t expensive.
  In addition, you can install an original Windows operating system and then all the Toshiba necessary drivers on the Toshiba site.

  Good bye

• Portege M200 recovery process does not work

  I want to re format my old M200 of 4 years using the original recovery disks (4).
  The recovery.txt file that is stored on the first disc advise me of a process for this, but also States that "this utility does not if the drive has been formatted or converted to NTFS.

  My C drive is NTFS, and the recovery process does not work.
  I'm unable to find any other documents or files on the drives to advise me what to do help.

  I would be greatfull for anyone who has experience with this issue who can advise me on the correct process to run my recovery on a drive formatted as disks

  NTFS.

  May I ask what laptop do you have: is it a M200 Satellite or Portege M200?

  How have you tried to recover the laptop?
  Have you tried to boot from the CD?

• WiFi does not work on Satellite C-55-A - 14 G with a Win 8 64 bit OS

  My wifi does not work on Satellite C55 - A - 14 G 8 64-bit Windows.
  How can I fix?

  There is wifi on other computers, but not on this laptop.

  Hello

  You always win 8?
  Microsoft has already published the Win 8.1 System.
  It of recommended to update 8 Win Win 8.1 because different bugs have been fixed and new features have been added.

  The 8.1 update win is free and you can download the Microsoft Store update files.
  Please perform updates, such as recommended by Toshiba and essential update, the driver and tools.

  I guess that after updating the WLan would work properly.

• Does not begin with satellite L350D-11 needs - new mobo

  Does not start my Satellite L350D-11 has (Modell Nr.: PSLE8E-00R006GR). Looks like a malfunction to the motherboard.
  What type of motherboard is installed in this notebook?
  Lars

  Hello

  The motherboard is a part of Toshiba.
  I have goggled one motherboard + Satellite L350D and found the part number: V000148140
  It supports a Socket 478 and it is the ATX form factor.

  However, the new motherboard is not good cheap; between $ 250 and $ 300

• Recovery CD does not completely load.

  I just replaced the hard drive and the recovery CD does not completely load. After having ejected the second CD, the file loading process stops at 12%. There is no error message and I welcomed as much as 5 hours for the load file to complete, but it remains at 12% after the first 30 minutes. HP Pavilion dv7-4165dx, Windows 7

  Well - here I answer to my own problem in case someone else has the same problem.  The second disk files recovery finally finished loading after 20 hours of waiting!  I spoke to two different technicians to support HP on the phone and neither one of them told me that it could take a long time to load the files!  One of them had me arrested and again after about 40 minutes of waiting.  I found it totally by accident after having frustrated and leaving it just stay there all night. Amazing!  The rest of the restore procedure went well after that - I think.  I'm always load all other software, files and updates, 2 days later.  The hard drive on this dog only lasted a year.

• ENVY 15 3040 nr recovery disc does not

  Hello

  I made a recovery disk set as soon as I bought my ENVY 15. I accidentally deleted all partitions, then tried to recover by using the disks that I did... but I get this error by...

  The system recovery media does not support this computer.

  You are not able to restore the system with the media.

  0110 A9P60UA #ABA - A9P58UA #ABA

  Help, please!

  Hello

  Assuming that it's just a problem with the recovery media, here's another solution, you can try.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• My recovery CD does not work and will not install my genuine copy of Windows XP.

  XP Home Edition.

  I bought a computer acer laptop, which came with a pre loaded windows XP Home Edition. As I had to format the laptop for some reason, I used a pirated version of XP.  Now, I want to install the original version. I have the product key. My recovery CD does not work, because I had used the pirated version.  Pls help...

  You need to start using the CD - no existing OS - and install it to clean.

  It will wipe your drive first, back up your data on an external support.

• HP Pavilion g6-1278sa recovery partition does not

  Recovery partition does not work after the creation of new partitions. Where can I get the restore CD?

  Hello

  You can order a set of replacement recovery disks using the link below.

  http://support.HP.com/us-en/document/c00810334

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• the system recovery media does not support this computer

  I have a HP G7-1365DX and the hard drive (750 GB) is a failure.  I did a recovery file on a USB key from the recovery partition and then replaced the hard drive with a 120 GB SSD.  When I tried to reinstall the USB system, I get the message "the system recovery media does not support this computer."  Is it because the hard drive was replaced by a SSD?  How to restore the system if the recovery disk does not work?

  Hello

  You are right about the source of this problem - HP recovery media often has problems of restoring the operating system on a smaller disk in quality than appeared on.

  There are a few options available.

  1. if the 750 GB drive is still able to operate, use your recovery media to perform a factory reset and then use software (or Windows 7 own imaging utility) for this clone of your SSD.

  2 create your own recovery media to use to run the installation - it would be my personal preference.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• Recovery Manager does not recognize a flash drive

  Well, this is my second attempt to create recovery media, initially I thought the drive was defective and returned. I would go to 8.1 but would create recovery first. Recovery creator does not recognize the cross (SanDick Cruzer 16 GB) flash drive the forums and google around and have not really found a solution. Help please? Must I resort to buying discs for this purpose? I don't see any mention of this player being Win 8 compatible.  PC is the new HP Envy 1430. THX...

  natrldsastr wrote:

  I said in my initial inquiry, I can't find any compatible 'Win 8' claim for this device. The packaging claims to be compatible by the bias of Win 7, but no mention of 8. I knew it was a problem and had checked. Regardless, this disc is useless for the recovery of the system. Thanks for your time.

  Hello! Looks like you have a couple of choices for me. Use a PNY flash. Create an image of your operating system with a third-party App or get some DVD high quality. I agree that the drive is useless for the recovery of the system. I've seen your problem before on other forums and other products. I do not have the answer.

  Dokie!

  PS Perhaps SanDisk has a?