Invalid binary - corrupted png file

Similar Questions

• How to convert the pixels of a binary PNG files in codeles folder

  Hello

  I am trying to convert the pixels of the PNG file in binary code and I have to do it for a folder full of PNG files. At the moment my home VI information from PNG in a cluster and then convert the color RGB pixels and then write them in binary. The problem is that it do so for only one way.

  Is it possible do automatically all the PNG files in the folder?

  If you need to make the existing logic for all the .png files in a folder (list the .png files and use build path in order to frame a picture of path all the png Files and then place your existing logic in a loop)

• 15.0 Firefox problem rendered png files

  I just upgraded to Firefox 15 and have noticed a problem in rendering png files. I rebooted, cleared the cache, run in safe mode, nothing works. I saw the same files with IE 9, and they look very good. I also copied the files on the desktop before displaying their but the problem remains of rendering. I have attached a jpg showing cropped images of FF and IE on the http://www.petapixel.com/ site and also attached the original png file.

  I would be grateful for any suggestion.

  JPG of image rendering
  png file (from xkcd)

  Nothing I can think - my graphics driver is a default installation of the AMD software (although I do not install the Catalyst Control Center). I do a bit of photography and have gfx.color_management.mode set to 1.
  However, I followed your advice and created a new profile and the problem disappeared. Back to my original profile, and the problem comes back. This behavior has persisted through several reboots so, fingers crossed, the problem looks like a corrupted profile. But I'll give it a few days this time before mark the issue as resolved.

  Thanks again for your help.

  Jim

• Windows Photo Viewer stopped opening PNG files

  Using Windows 7, 64 bit. Windows Photo Viewer no longer displays one. PNG file. He has always worked in the past. I get the error message

  Windows Photo Viewer cannot open this picture because the file seems corrupted, altered, or is too large.

  A similar message is obtained from Windows Live Photo Gallery

  Microsoft Picture Manager is OK, like paint, Irfanview, Picasa and many other programs.

  I've updated MS .NET to 4.5 as suggested in another post.

  This also affects the ability of the Explorer to display thumbnails when the photo viewer is the default program for PNG.

  Your system ceased to display PNG files after Microsoft Update KB2670838 was delivered to your computer through Windows updates in late February 2013.

  Software developers cannot possibly predict all future updates that Microsoft will make to its operating system or applications. Do us, however, solve the problems when they occur and publish updates as necessary.

  A more reasonable notice might suggest looking for an update of the FastPictureViewer Codec Pack instead of pointing the finger and recommending other users to uninstall our product that if it turns out, was not directly responsible for the issue.

  You also do not mention that uninstall the FastPictureViewer Codec Pack - while setting the PNG issue you know - also disabled Explorer thumbnails and previews of the Windows for Adobe PSD, EPS Photo Viewer, I and the other 40 formats support us.

  The compatibility problem that resulted from the installation of KB2670838 was identified and corrected since, as well as another problem of compatibility that is revealed only after the release of Microsoft Office 2013.

• the application needs to restart after removing the application due to .png files.

  When images are imported under res/img /, the application needs to restart after removing the application.

  Even the functions related bitmap are invalidated, the application should always reboot after removing the application.

  recordPic private bitmap is Bitmap.getBitmapResource ("Record-Normal - 1.png");.
  stopPic private bitmap is Bitmap.getBitmapResource ("Player-Stop - 1.png");.
  infoPic private bitmap is Bitmap.getBitmapResource ("Info - 1.png");.
  setupPic private bitmap is Bitmap.getBitmapResource ("setup - 1.png");.
  private bitmap exitPic is Bitmap.getBitmapResource ("exit - 1.png");.
  calibPic private bitmap is Bitmap.getBitmapResource ("calibrate - 1.png");.

  The png files are under 24 KB.

  Does anyone know what is the problem?

  Thank you for your attention,

  After the resolution of the image to 14KO downgrade, the problem is solved.

• The PNG files are not open in CS6

  I have SP6 which works perfectly since I got up this morning.  Now all of a sudden, any time I try to open a PNG in PS, I get the message "could not complete your request because the file is not found.

  I checked my preferences and png are set to be opened by the PS, and I tried many png who opened my program in the past, no problem, this is not a case of won't corrupt png.  Also, I went and replaced the preferences file in PS6 in the case that was damaged, but nothing works.  PSD and j clips are open.  The only plug-in that has changed recently is that I upgraded to photosuit On1 9.5 to 10 Photosuit On1 last week.

  Help!

  Kim

  Hi Kim,

  Suggest you to run Photoshop with the SHIFT key and click Yes to ignore the loading of plugins in option

  Then go to file > open and select the PNG file to open

  Apart from this, you might also want right click / Control click on the PNG file in file Explorer / Finder and choose open with Photoshop.

• .png file causes the program crash after playing two seconds of video.

  Whenever I have a .png file with 2 video files it says program does not, then after a few seconds it crashes when video plays in comp. This is a really annoying error I tried to correct for the last 3 hours.

  I'm this tutorial: Adobe After Effects - Glitch Tutorial - YouTube

  Here is a video of what happens: Dropbox - 20150604_110918.mp4

  I realized that it was the .png file, because when I took on this worked. I tried to put a smaller .png in the video, but diddnt work either. I have no idea why this is happening and I even tried to run it on my other computer and it does the same thing.

  I hope that someone will know what is happening.

  Thanks in advance!

  The problem is not with the .png file, this is the bug screen - Free Stock Footage.mp4 file. It is all dirty upwards and blocks almost all applications that I am looking to use to render a new copy. Just open the MP4 in Quicktime format you get something that resembles images for the first 2 seconds and then it freezes just give you this:

  

  It is a corrupted video file, and this is what is causing your problems.

• Cannot open PNG files in Fireworks MX2004

  I'm unable to open all png files with more than one item in them - for example. text and images.

  I get a cannot complete your request "internal error."

  I have re-installed Fireworks, but this did not help.

  Please help - this is driving me crazy!

  The problem may be caused by moving them to a different location than the one they were originally save to. It could also be cause by removing a font used in them, or if the police are corrupt.  Can you open in another program, such as Photoshop?

• Make my transparent .png file?

  Can what iMac software I use to make my transparent .png file?

  Personally, I use Adobe Fireworks, but I believe that Photoshop will work as well. Alternatively, you can use a snippet.

• Error on send/receive .jpg .png File

  Guys good day, hope you're enjoying your holiday

  I've had a problem here & help

  We use Skype 7.0 version now for the communication of the company & our pc work with windows 7 OS

  My problem is that I can receive .jpg .png file of my contacts & too, I can't send the same file for them?

  This problem happens almost all on Skype from my work, although some of them works very well

  I tried to find the right solution on this forum, but I can just get the right answer for the barrier, I face at this moment

  Then I attach a screenshot on the case, I said above

  can someone help with my problem?

  Thanks before

  

  Update your Internet Explorer to version IE11.

  http://www.Microsoft.com/en-us/download/Internet-Explorer-11-for-Windows-7-details.aspx

• Satellite 1800: boot failure - Invalid BOOT. INI file

  When I'm getting the following error message appears

  Invalid BOOT. INI file
  Booting from C:\WINDOWS\
  NTDETECT failed

  I tried using the recovery CD, but it makes no difference

  Someone at - it ideas?

  See this document from Microsoft:
  http://support.Microsoft.com/?kbid=330184

  Cehck also this:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=1328&MessageID=3021

• Write that VI PNG file will not replace the existing file

  Hi all

  I use VI file PNG write to store the graph in a png file. I am able to save the file with a specific file name, which includes the date, model number, serial number etc.. Once the chart is saved as a png file, if I make changes in the graph (as autoscale, turn captions etc.) and try again to save the file with the same file name, write PNG leader VI does not save the changes I made on the chart. I'm looking at the timestamp on the windows Explorer, but it is not updated. I opened the VI itself (which is write protected) to see if it generates an error if I provided the same file name, but it does not generate an error.

  I don't know if I am missing anything.

  Can you people please help me find a way to replace the existing PNG file?

  I'm using LabVIEW 2013 on Win 7 machine.

  p.s. I use the second method mentioned in this article:

  http://digital.NI.com/public.nsf/allkb/5AE4ADCBB65A6D8F86256FBF007A1AC1

  (Programmatically with the Get Image method).

  Thanks for your help

  OPR

  OPR wrote:
  ... Write VI PNG file does not save the changes I made on the chart. I'm looking at the timestamp on the windows Explorer, but it is not updated.

  You are also looking at the image itself? Explorer Windows cannot update the timestamp in the display immediately, or you might be looking at creation time, which doesn't seem to change when you replace a file.

  I can say that I saw a similar question very recently (he was also PNG, even if it's not really relevant), and here it certainly crushes - http://forums.ni.com/t5/LabVIEW/LAVA-snippet-overwrite-keeps-old-date-time-of-png-file/m-p/3257059#M...

• Writing PNG file failed when build exe, but operate normally on the development platform

  See photo below, it is used to call WinAPI for screenshot and then save it in PNG file. This Vi operate normally on the flatform of development, but it failed when building the application .exe file. The pop-up dialog error 'chain of illegal path, OS', but it is clear that the path is correct. Note: run the same PC with Win XP.

  

  Update:

  I found the reason, but not a solution. In fact, the Clipboard.Get Image does not work when building application exe. But it's the private node invoke, impossible to get support of NOR.

  It seems to be to the node to invoke public on the version of LabVIEW 2012, which can help you check on LV2012 version? Thank you very much.

• take screenshot and saves the image to a PNG file

  Hello

  How do I take screenshot and save the image as a PNG file?

  Thank you

  Avivit.

  If you want a picture of façade one VI, you can use the method to obtain images of Panel (or the Tool of Capture of Code, which offers a range of screws for this).

  If you want a picture of the entire screen, you can simulate a button on the print screen, using the method of Clipboard.Get Image Application class to get a picture of the contents of the Clipboard. If you are looking for "screenshot" you should probably find a few examples already.

• problem with the READING of the PNG FILE

  I read a file png - one photo with transperent back polished - READ the PNG file and display them in my program using a function to draw the flattened Pixmap.

  I get a very dark black background color - in the image created.

  How can I solve this problem?

  Please give your suggestions

  Thanks in advance

  RENN

  RENN,

  Probably you monitor is too dark, and you should just increase the brightness a bit?

  Seriously, when you post this question - its always goot to include an example. In this case: picture a) and b) source code snippet - how do you use it?

  Look here--I don't have a big problems:

  

  The only small problem semitransparent is not taken in charge. You must set the threshold (which amounts to default 127).

  See attached example.

  Kind regards

  Andrey.