"Inverse" stress possible on menu?

I got the first season of "Dexter" off my Tivo, and I burn on a DVD.  I have a question about whether or not I can do something with a menu.

I want to have is a menu where I have four episodes that are on the disk are listed, and they are all covered by a band of Crime scene.  As each one is highlighted, the band this button disappears.

I created the elements of text for each episode, and I created a bunch of scene of crime for each button.  Just to make sure everything worked, I put the yellow box representing the Ribbon for each button in the yellow ribbon of '(=1) "and the black text saying 'crime scene do not cross' as '(=2) crime scene."  I preview and it works fine, I have point out each one, the crime scene tape covers this episode in particular.

So, now, I try to change it to the exact opposite.  My first thought was to create a text of 'crime scene do not cross' yellow box over episodes 2, 3 and 4 as a layer of highest for episode 1 and corresponding point black in each box.  I'd do it for each button, leaving each white button and covering the other 3.  Unfortunately, as you can imagine, it just creates 4 buttons who each were as big as the entire list.

Is there a simple way to do what I'm doing?

This can be done with duper Menus and a little layout work. There will be a dupe Menu for each of your four buttons on the original Menu.

You define your original menu with 'crime scene tape', the value the subpicture real button to highlight 100% Transparent, or remove it completely. Each button would be set to scoped. Each would be tied to a dupe (different) Menu, where the "crime scene band" has been removed for THIS button only. You can embed the actual layer highlight subpicture for that, but I would need her. It would be a 'real' button, related to your appropriate schedule. When the user navigates to the button in the original Menu, it is scoped to which fooled the Menu and show that the "crime scene band" has been removed. This will be the real button in the timeline, so when they activate it, they will be taken for this timeline. Note: with the software on a computer DVD player, there may be no Auto-Activate, then the user must click on the button "twice."

Because you need to make a dupe Menu for each button in the original Menu, a page layout is very useful, or you can get very confused. I also nominate my dupe Menus to reflect the button on which they are linked from.

When you preview, it might be a little late, but then burn a DVD RW and test on a set-top player, hooked up to a TV. This discrepancy should now disappear. Preview is only a rough emulation and should not be invoked in this case.

Good luck

Hunt

PS - another similar this is to have all the thumbnails appear in black and white in the original Menu and then seem to turn magically in full color (on the dupe Menu), when you can access this button.

PPS - Welcome to the forum!

Tags: Encore

Similar Questions

  • updated list drop down menu by typing item

    Hi guys,.

    I create a drop-down list by using enum. The drop down menu may have about 1000 + points. Is that possible the menu drop down to update the selection, I want while typing the word?

    The enumeration so that the controls of the ring won't let you type in when the vi is in run mode. A combo box can do what you expect

  • Is it possible with CSS menu that appears when you click the menu button on a menu bar of style?

    I'm trying the menu that appears when a menu button is enabled in the style menu bar. I am able to style the menu bar and menu button in the action bar very well.

    However, I was completely unable to style from the Menu that appears.

    I asked the same question over to StackOverflow.com, but have not yet received a reply.

    Basically I have a menu that is set up as a bar:

    <MenuBar VBox.vgrow="NEVER">
      
    <menus>
      
    <Menu mnemonicParsing="true" text="_File">
      
    <items>
      
    <MenuItem mnemonicParsing="true" text="_New Project"/>
      
    <MenuItem mnemonicParsing="true" text="_Open…"/>
      
    <MenuItem mnemonicParsing="false" text="Quit"/>
      
    </items>
      
    </Menu>
      
    </menus>
    </MenuBar>

    I was completely unable to style the MenuItem or container here when they are indicated. I have dug through CSS of the skin of the Caspian Sea, but was unable to find out what anyone who specifically the. I tried to substitute the values of the ContextMenu, Menu, menu button and MenuItem that is located in the Caspian Sea, but nothing seemed to affect this menu.

    The menu is clearly inconsistent with the menu system, so why am I unable to style it?

    Isn't this possible? It will be possible in the future?

    Thank you for answer two. Unfortunately, what was proposed was not enough to solve the problem by itself. I didn't know that .menu - the point has had a child of .label who could bear the title, but that alone was not enough to correct the problem.

    Fortunately, Uluk Biy on StackOverflow.com was able to answer the question. He stressed that wanted me the property - fx-skin. I realize that I did not provide enough information here for users to come to this conclusion, so I wanted to thank you for helping with the little information you had.

    It seems that, once I've added the property - fx-skin .context-menu, I am able to style menus.

    Thanks again guys.

  • Firefox always displays all the possible options in the context menu

    When I select some text on a web site and right-click, I get a popup menu with about 50 options.

    Some earlier, archived posts have addressed one of the causes of this - extensions - but disable my extensions and restarting did not work for me. I always get the context menu options-50.

    Here are the previous posts:
    https://support.Mozilla.org/en-us/questions/955270
    https://support.Mozilla.org/en-us/questions/951383

    Do a clean reinstall and remove the Firefox program before (re) install a new copy of the current version of Firefox.

    Download a new copy of Firefox and save the file to the desktop.

    If possible to uninstall your current version of Firefox to clean the Windows registry and settings in the security software.

    • Do NOT remove the "personal data" when you uninstall your current version of Firefox, because this will remove all profile folders and you lose personal data such as bookmarks and passwords including data profiles created by other versions of Firefox.

    Remove the Firefox program before installation newly downloaded copy of the Firefox installer.

    • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"
    • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.

    Your bookmarks and other personal data are stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but make sure that 'delete personal data' is NOT selected when you uninstall Firefox.

    If you keep problems also create a new profile.

  • Is it possible to move the menu button in the new interface?

    I find the idea of the right terrible menu. Is it possible to move the button previous position or at least to the left?

    Install Stylish for Firefox https://addons.mozilla.org/de/firefox/addon/stylish/ .

    Create a new style under modules-> User Styles and copy the following text in the largest of the three boxes:

    @namespace url ("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul");

    @-moz - document url ("chrome://browser/content/browser.xul") {}

     #PanelUI-button, #customization-panel-container,
    
     #customization-panelWrapper .panel-arrow,
    
     #ctr_panelui-button,
    
     #wrapper-ctr_panelui-button {
    
       -moz-box-ordinal-group: 0
    
     }
    
     #PanelUI-button {
    
       background-position: 100% 0, calc(100% - 1px) 0, calc(100% - 2px) 0;
    
     }
    

    }

    End of the text (do not copy this line). ############

    Save and restart. The button should now be on the left.

  • Is it possible to prevent the right click context menu of the combination of Stop/Reload?

    Is it possible (subject: config tweak or something) to prevent the context menu of the combination of Stop/Reload?

    Screenshot of what I mean: http://picsend.net/images/873089StupidReloadSto.png

    Try to add this code in the file userChrome.css below default @namespace.

    Customization files (interface) userChrome.css and userContent.css (Web sites) are located in the chrome folder in the user profile folder.

    @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
    
    #context-stop,#context-reload[hidden="true"] { display: -moz-box!important; }
  • Is it possible to completely disable tabs (remove all tab options menu) for firefox 10?

    Is it possible to completely disable tabs (remove all tab options menu) for firefox 10. I hate the tabs and the recent changes made to the incorrect selection of menus are "open in a new tab" when what I want is "open in a new window" a common and unwelcome occurrence.

    You can hide menu items and move up / down in the menu with the Menu Editor extension.

    https://addons.Mozilla.org/en-us/Firefox/addon/710

  • Just changed Safari on my imac. When you use find menu safari gave me the opportunity to "find in this page" which was an incredible aid during a search. Is it possible to have this feature using firefox?

    Just changed Safari on my imac. When you use the search menu in safari, I had the opportunity to "find in this page" which has been an incredible help while doing research and looking for specific words/phrases. Is it possible to have this feature using firefox?

    I think that Safari has the same keyboard shortcut in Firefox 'cmd + F' on a Mac or a 'Ctrl + F' on Windows.

    Look in the lower left corner to find. There are more likely to be next and previous differences in keyboard shortcuts, but continuing in the search bar at the bottom no matter what browser you use. It is an 'X' to reject the search bar. In Windows, the "Esc" key will reject the bar if you are in the search text entry box.

    Keyboard shortcuts:

    Please mark "resolved" a response that will better help others with a similar problem - hope it was her.

  • Is it possible to customize the right-click menu?

    I use FF4 RC2 and I wonder if it is possible to customize the context menu? In FF3 if you right click on a tab lists ' new tab '. Reload tab reload all tabs... "etc. but in FF4 if you right click on a tab lists only "Reload Tab | PIN as App Tab... "etc.

    I really really use the right click-> new tab in FF3 A LOT! It was a HUGE disappointment for me when I started using FF4. Is there anyway that I could add the button tab in the right click menu?

    Thanks in advance!

    Not that I know of. You can use file > new tab or Firefox > tab in addition to what I posted above.

    Maybe an extension like Tab Mix Plus can add this feature in the context menu of the Tab bar.

  • Is it possible to edit Firefox context menu to the standard address for the displayed Web pages?

    Is it possible to edit Firefox context menu to the standard address for the displayed Web pages? Often, I want to save an image on a page. Sometimes I "slip" and press "Send Image" when I want to "Save Image under" and sit and wait for the default page - send an email to come, then shut up, juggling its dialog boxes "are you sure". It is a way of trying to manage a blunder. Basically I want an element directly from a page by email. Is it possible that I can simply remove "Send Image" from the context menu?

    It is possible with the Menu Editor extension:

    https://addons.Mozilla.org/en-us/Firefox/addon/710

  • Is it possible to have the cells to automatically fill in values by reference to another cell (which is be pop up menu)?

    Use numbers for iMac. So basically, I have a range of cells is formatted for a pop-up menu list.

    This list contains foods. Is it not possible to say, if I select 'milk' of food, have another cell autopopulate the value in calories for a serving of milk? I know that I have to enter these values somewhere, so I could do it on another sheet.

    So I think something like if cell changes to pop up the text value of selection 'milk', get the value of the other sheet for calories from milk. If it turns into 'fish', it takes the value in calories of fish etc.

    Hi nervvusNRGs,

    What you want is a lookup table.

    Lookup() returns a value close, so using a popup will protect from close matches as long as all the values in the pop-up in the table of your choice.

    Quinn

  • Is it possible to change the menu of windows update to the much more functional version?

    Is it possible to change the menu of windows update to the much more functional version? The change took place on 07/10/09 and made by selecting which updates to install more troublesome. * Note * I do without roll back Windows Update 7.4.7600.226 Agent that has been installed on 10/07/09.
    This change of format is also just change the switch on for windows 7?

    Hello

    Welcome to Microsoft Windows Vista community forums!

    I am sorry to say that there is no choice left out. You must perform a system restore or uninstall the manual update that is installed.

    Improvements made to the version of the Windows Update Agent 7.4.7600.226

    • Time sweep improved for Windows updates
    • Improved user interface for Windows Vista and Windows Server 2008 - based computers that are running Windows Update
    • More visible and detailed description of updates
    • Improvements in the way in which users are informed about service packs

    For more information, please see the link below:
     
    http://support.Microsoft.com/default.aspx/KB/946928

    Kind regards

    Savan - Microsoft technical support.

  • all my Start menu programs were dashed when cleaning an infection on my XP PC. The computer starts well. Is it possible to restore program shortcuts

    My PC has been infected evil and right after that I typed my password, some malware would take over. I was able to use Avast to get rid of the infection, but now when I go into my Start menu there is no visible shortcuts, and when I click on the programs of the window is empty. Is it possible to restore the programs in the program menu.

    Hello

    These problems occur if the value of the Start Menu common registry entry is inaccessible or if the value is not valid. In this case, Windows XP cannot initialize the shell program.

    The fix of the below article can be useful.

    When you point to "Programs" on a Windows XP-based computer, the program list does not appear, or the list of programs is empty
    http://support.Microsoft.com/kb/941248

  • Is it possible to change the order of the menu options in the menu contextual by name, i.e. open, delete, rename?

    When I right click on the shortcut menu to rename a file I always hit the delete option (fortunately I wonder if I close) and choose "Rename". Is it possible to move or sort the menu so that I wouldn't be in this situation all the time?

    Hello

    refer to this link and check:

    http://www.dslreports.com/Forum/r19476427-sort-context-menu

    http://forums.techguy.org/Windows-Vista/678280-how-do-i-organise-new.html

    It will be useful.

  • Is it possible to have different text in action on the action bar menu?

    I want to have the text in the action menu such as 'start my session' and have a title on the tab of the action bar that says only: "Meeting" from the beginning of that meeting is difficult to adapt. Is this possible?

    Thank you once again.

    The code...

    Page {
        actions: [
            ActionItem {
                id: aiFirst
                ActionBar.placement: ActionBarPlacement.OnBar
                title: qsTr("First")
            },
            DeleteActionItem {
    
            }
        ]
    
        onActionMenuVisualStateChanged: {
            if (actionMenuVisualState == ActionMenuVisualState.AnimatingToVisibleFull) {
                aiFirst.title = qsTr("First and still the best")
            } else if (actionMenuVisualState == ActionMenuVisualState.AnimatingToHidden) {
                aiFirst.title = qsTr("First")
            }
        }
    
        [ ... ]
    
    }
    

Maybe you are looking for

  • How do we uninstall Aurora of my Android device?

    I installed Aurora on my 2.3.6 Android mobile phone. It is not visible in "My Apps" in the Google game store. I don't get invited to be updated to the same version of the app, again and again, if I want to remove - however it does not appear in the l

  • very slow niswitch with signal connected (PXI-2535)

    First time using a switching FET card, running base vi where I connect a line and two columns, and make a measure of resistance with a multimeter. I found that with the digital multimeter connected, IE the applied signal, the switch may take more tha

  • When you run Runescape, get the black popup box

    someone knows what to do if a box opens and its Black Interior, then it does not? I need someone who is an expert of runescape, and that. Thank you. !

  • Canonoscan 4200F

    I hope someone can help me with this problem. I have a Canoscan 4200F running on the Windows XP Home edition, which so far has given no problem.  But for some reason any he has now stopped showing a preview before scanning.  I uninstalled and re inst

  • Error message in another language when you try to run the perfect world and Forsaken World

    Hello everyone I have a problem that I've been up to this unable to solve, and I hope someone here can...in the last month or more I tried to run the following games perfect world and abandoned managed both by entertainment world perfect but continue