Invisible data

Similar Questions

• 17 GB of invisible data seems to have moved between disks from one day to the next, with 10 additional GB removed F:.

  Yesterday, I took measures to try to free as much space as possible, hoping to upgrade to Windows 10. When all was said and done (delete the old restore points, deleting old graphics driver installation files, etc.) my C: fell from 13.5 GB of free space to 27 GB, with orders F: to about 624 GB of free space. When I closed my computer for the night, I shut it down normally (ie. He would not download/install updates).

  When I started again this morning, it starts normally (no not wrap updates began the last stop down), but when finished loading office there is a message in the Windows taskbar to say * fact * install the updates. Out of curiosity, I check my free space on both my drives and my C: went up to 10 GB of free space, with my F: in GB 645. The kicker? When I clear space yesterday, I took a glance at each weight (including hidden files) folder. Today when I did the same thing, nothing seemed out of the ordinary. In other words, each folder in C: root seem to occupy the same weight. I didn't even move anything from my C: to my F: when you try to free up space, I just deleted everything I wanted more.

  Just to be sure, I went back and cleared again restore points, but he did exactly the same thing that happened yesterday: nothing. There was no progress bar and no space was saved. I also checked on Puran Defrag, but my C: earn barely any fragmentation, indeed, I've defragmented it yesterday. I've also already disabled the hibernation and removed the hibernation file earlier, which helped a little. On the other hand, this means that I have absolutely no idea whence this 17 Go invisible and how to get rid of.

  Any help would be appreciated.

  Edited to simplify the title.

  You are welcome.

  See this tutorial

  Swap file

• After 2015 CC Illustrator update all the floating palettes and bar 19.2.0 invisible data tools

  I've just updated Illustrator CC to 19.2.0 on my MacBook Pro under OS X Yosemite 10.10.5 and all my boxes floating palettes/menu and the toolbar data are all empty boxes are transparent, allowing me to see the desktop behind them by about 50 percent. Also, all dialog boxes to save a document or Illustrator preferences, etc. all open totally empty, so I can't make adjustments to what it is. I've deleted preferences, restarted, Illustrator uninstalled and reinstalled, uninstalled and reinstalled Adobe CC, rebooted about 17 times more and no change at all. I can spend the workspaces and this doesn't change anything, either, nor is check or uncheck Application frame. I can't find anything in the forums to help me. This is ridiculous and I can't work, Please HELP.

  As for the vacuum cleaner, you may consider to ask more questions here:

  Adobe Creative Cloud

  Please also post a screenshot of the interface.

  Astute graphics plugins are updated to the latest version?

  They must be compatible with Illustrator CC 2015.2 and El Capitan.

• Search box in interactive reports

  Hello.
  
  I use Apex 4.2.1 against Oracle 11 g 2 and Oracle Application Server (mod_plsql).
  
  I created an interactive report which includes the standard search as well as the Actions menu field.
  
  When users enter text in the search field and click the GO button, lines are found in the report if the report columns containing this text are actually displayed in the report. If these columns are unchecked by the user, then the search returns "no data found".
  
  This behavior can be confusing, especially since my users do not know before hand that the report columns can contain the text entered in the search field. A message "no data found" may be wrong according to the columns that are displayed or not displayed in the report.
  
  I bypassed this problem by disabling deliberately (i.e., hiding) the standard search field and its replacement by a regular text field Apex (say P36_SEARCH). I then added a WHERE clause to my report IR query.
  
  And so assume my IR report is on the EMP table, my SQL query looks like:
  

  select *
  from
  (
  select
  empno,
  ename,
  hiredate,
  sal,
  comm,
  deptno
  from
  emp
  )
  where
  (
   instr(to_char(EMPNO), nvl(:P36_SEARCH,to_char(EMPNO))) > 0 or
   instr(upper(ENAME),upper(nvl(:P36_SEARCH,ENAME))) > 0  or
   instr(to_char(HIREDATE,'dd-mon-yyyy'),nvl(:P36_SEARCH,to_char(HIREDATE,'dd-mon-yyyy'))) > 0  or
   instr(to_char(SAL), nvl(:P36_SEARCH,to_char(SAL))) > 0 or
   instr(to_char(COMM), nvl(:P36_SEARCH,to_char(COMM))) > 0 or
   instr(to_char(DEPTNO), nvl(:P36_SEARCH,to_char(DEPTNO))) > 0 
  )

  This method works. However, because this isn't a part of the IR functionality, users can not save these searches as part of a saved report.
  
  So, here are my questions.
  
  (1) is it possible to get the IR report to apply the text entered in the search field IR Standard against all the columns of the report, whether or not they are displayed in the report?
  
  (2) if not, then is it possible to allow users to save my ad-hoc solution as part of a saved report?
  
  Thank you.
  
  Elijah

  So maybe you're between the hammer and the anvil and you're limited to educating users regarding out-of-box functionality - and if they want to limit the invisible data they need to use a filter explicit for a specific column.

• When printing the page data in Schwab, the police are so tiny, that it is almost invisible - it does not occur in Windows Exploror.

  20/02/2013 all impressions was normal. 21/02/2013 not only printing did not work, but PDF files did not appear correctly. Is this a new version of Firefox? I got the PDF reset so that it now works, but not printing. In the Comcast e-mail, the date moves way right and forces the smaller font. When I uncheck 'reduced to adjust', it encapsulates not the text but rather chops it off when I increase the font size.

  Today I tried the printed pages of Schwab by using their "Print Page" button that has always worked in the past, but today it was illegible.

  Can I go back to the previous version of Firefox?

  https://support.Mozilla.org/en-us/KB/fix-printing-problems-Firefox

• Why can I not use the features of text as invisible ink

  I have an iPhone 6s and cannot use the features of text as invisible ink or send messages with Fireworks and things.

  Those are features of iOS 10 be released 13. You can then update and get these feature.

  http://www.Apple.com/IOS/IOS-10/

  If you decide to update on the release date, the Apple servers could be very busy, so be very patient if you can not update immediately.

• Invisible pinned tab takes place

  I encountered a bug in the new Firefox. I've pinned a tab, then by chance, I moved the tam in a new window (via context menu). New window opens with the tab this marking, but... it seems that the pinned tab went invisible, there's just an empty space that I can't do anything about. I can't click on it (in other words, it behaves like the rest of the free space on the tab bar) and he stays there after restart of Firefox (even if Firefox should start with a blank page only, this is what is was set to do).

  Screenshot: http://abload.de/img/beztytuur5o1g.png - you can clearly see that there is an empty space. It is exactly as wide as a pinned tab. It appears in all open Firefox Windows.

  Any ideas how to get rid of? It is not a problem, but a bit annoying all the same.

  PS. I won't reset the Firefox settings, too many problems with all that upward adjustment.

  I hope that we will not have to reset Firefox. It's a pain for all those who have a ton of extensions and have it configured as you wish. Personally, I use Sync 'save' my stuff. Given that I'm always changing computers, I can sync all my stuff in my new Firefox. Works like a charm!
  Normally, Sync is not used to back up data, but I still use it.

  You have a lot of extensions so that one of them could be the problem

  You can try to start Firefox in Mode safe to see if Firefox works correctly without error? You can start Firefox in Mode safe below:

  • Windows/Mac: choose Help > restart with disabled modules
  • Linux: run firefox-safe-mode in the Terminal/Konsole

  If Firefox opens fine with no problems, it is probably one of your extensions that is causing the problem. You can reactivate your modules one by one until you find the one that is causing the problem to be re-activated.

• Cookies and website data keep reappearing after removal

  When I delete old or unused cookies and the Web site data in the preferences of Safari (9.1), they keep reappearing, a lot of sites I haven't visited in months or years. I guess they are be re-populated icloud. How do I delete and ask them to stay gone until I actually decide to visit those sites again once? I like to have iCloud keep my computer, phone and tablet in sync, but I don't understand why it isn't updated itself to follow what I do,

  Safari automatically checks websites for updates:

  Top Sites

  Son subscribers

  Sites selected for Quick Web site search

  Pages that turn up as Top Search Hits

  Pinned tabs

  Cookies and data bases of these sites will be reloaded even if you do not visit them. If there are sites that you do not want to accept cookies, follow the instructions in the support articles linked above to exclude. Note that if you visit a page often, it may be added to your Top Sites unless all the available places are already occupied by pinned sites.

  Cookies can also be created by elements, such as advertisements and invisible "web bugs", which come from a different web server than inviting you to. You can block some of these cookies in the privacy of the Safari preferences window tab.

  To block all cookies for a site on a selective basis, you will need to use third party software or another browser. I don't have a specific recommendation.

  The file in which web cookies are stored can also be used by third-party applications that use the same mechanism as Safari to communicate with web servers. These applications can add cookies from sites you have never visited in Safari.

• A ran Bootcamp, now have an invisible 30 GB partition

  Need help. I ran Bootcamp to install windows (obviously). Everything's fine, rebooted and nothing. The right Mac experience. No sign of victory. All I have is a missing 30gbs. This partition is invisible to disk utility.

  Any suggestions on how I can remove this partition? Thank you.

  BCA may fail when creating partitions.

  Can you post the output of the following commands in OSX Terminal?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• How-to Remove All Data Web site

  I had a fake Virus alert and got rid of the lock upwards, but have been unable to "Remove all data from the Web site" in the preferences "Privacy". Whenever I have delete data, it is well again with 206 stored cookies. Any suggestions to get rid of these cookies permanently?

  Safari automatically checks websites for updates:

  Top Sites

  Son subscribers

  Sites selected for Quick Web site search

  Pages that turn up as Top Search Hits

  Pinned tabs

  Cookies and data bases of these sites will be reloaded even if you do not visit them. If there are sites that you do not want to accept cookies, follow the instructions in the support articles linked above to exclude. Note that if you visit a page often, it may be added to your Top Sites unless all the available places are already occupied by pinned sites.

  Cookies can also be created by elements, such as advertisements and invisible "web bugs", which come from a different web server than inviting you to. You can block some of these cookies in the privacy of the Safari preferences window tab.

  To block all cookies for a site on a selective basis, you will need to use third party software or another browser. I don't have a specific recommendation.

  The file in which web cookies are stored can also be used by third-party applications that use the same mechanism as Safari to communicate with web servers. These applications can add cookies from sites you have never visited in Safari.

• The internal organisation of DIAdem data returned an error of initialization

  Hello.

  I have a laptop that is running Windows XP with installed 10.2 DIAdem.

  Main problem: tiara does not start. A few seconds after trying to run it I get a message "ERROR" box saying

  "The internal organization of DIAdem data returned an initialization error."

  Question that might be related: when I connect to the laptop there is an error message saying:

  "The DataFinder cannot start to an internal error. (122): failed to open the configuration file! C:\Documents and Settings\Settings\Application Data\...\my.datafinder< runmode:="" datafinder="" desktop="">

  The directory C:\Documents and Settings\\Local Settings does not exist on the laptop.

  My first thought was to reinstall just DIAdem. However, when I open Add/Remove Programs tiara is not in the list, so I can't uninstall it. When I just try to run the installer it says I need to uninstall the existing version first.

  No idea how I could get DIAdem working again?

  (btw this laptop is used for courses etc in our society, so I do not know how this problem occurred. Just that they have not been able to run the tiara on her for more than a year)

  Hi such,

  in your 1st post you mentioned that you couldn't find tiara in the Add/Remove Programs list.

  => Please look into this list to or . That's because NEITHER has its own entry in the Add/Remove Programs list. Here you should find DIAdem to uninstall.

  You should use MSIBlast if the 'normal' Uninstall failed for some reason. If you use MSIBlast, he could not guarantee that everything is uninstalled in the right order. MSIBlast is not updated on the dependencies between the msi files.

  You told us that the directory C:\Documents and Settings\\Local Settings exist on your laptop. If you have a proper installation of XP, it must be there. It is sometimes invisible because of your windows settings. If this is the case please change your windows settings so that you can see the folders system as well.

  If you found this file, please remove the following folder: "c:\Documents and Settings\Settings\Application Data\National Instruments\Shared\DataFinder". After that start please DIAdem - a new folder with sub folders 'config' and 'data' are created.

  If the error is-, then I have only one idea: If your laptop doesn't have hard enough to free up space to manage all temporary files that occurs during an installation - so maybe it's that this message occurs if you start the installed application. The installer itself is not warn about in each case, overloaded virtual machine, e. g. fragmented hard drive, etc.).

  Hope that some of my points would help you,

  Kind regards

  dietfons

• invisible plots still under development

  Strange thing: when I have several plots, and they all are hidden (Visibility = Collapsed), and then when I got out of the data, it is shown first and then hidden (and not only not being developed in the first place). When I have at least a plot visible and invisible are not drawn as expected.

  I was able to reproduce this problem, when all parcels are hidden in a graph with a frame rendering mode. I created a task to solve this problem in the next version of Measurement Studio.

  To work around the problem, you can use this function to erase the graph:

  private void ClearRasterPlotArea( ) {

        if( graph.ActualRenderMode == RenderMode.Raster ) {

            RenderMode renderMode = graph.RenderMode;

            graph.RenderMode = RenderMode.Vector;

            graph.RenderMode = renderMode;

        }

    }

  When a chart is in raster mode, happening temporarily the graphic to vector, then return to the old way, forcing the target raster to clear rendering.

• Get correct time and Date data in DIAdem data 11 PDM LabView

  I have a handful of files large tdms (9 million data points) collected with LabView that I need to extract elements from and export to a text file, with time string data.

  I use DataFileLoadSelect and the option to register, and then DataBlCopy in bring in a segment of data at a time, but I'm having convert explicitly each time value of a time base of LabView (01/01/1904) to the time base DIAdem (01/01/00), not to mention the offset, before writing the date-time as a text string - it really slows down the process.

  I ' t hit me that DIAdem (11.1) has got to have a way to correctly read the timestamps of LabView, but I'm a newbie to tiara, so any suggestions would be helpful. And no, I don't have LabView LabView installed locally, using a vi is not an option for me.

  Thank you

  Eric

  Hi Eric,.

  I saw your second post after I have posted my first answer.  Your second post has indicated that the main issue was the value of date/time of departure in tiara.  All versions of DIAdem, waveforms of support (10.0 - 11.1 currently) by default to hide the start time of each waveform absolute in an invisible property.  It is responsible, but you'd never know it by scanning the table of properties in the data portal.  Idea of R & D with this implementation is that most people will want to look at the relative time of the wave, and they were still hiding this "wf_start_time" property so that users would be confused by the inconsistency between what is displayed in graphic form and what they see in the properties of the data portal.  They have certainly achieved their goal, but only for customers, they had in mind.  It only that exacerbates an already frustrating problem for your use case.

  But there is a way to read this date/time property invisible absolute beginning and create a channel of date / time that you need for ASCII-output - I join you two examples below.  If you need to be more focused on the shifting geography, so I recommend the ChnLinScale() function instead of the calculator - channel, it should be even faster.

  Hope this helps,

  Brad Turpin
  Tiara Product Support Engineer
  National Instruments

• Information scaling of data acquisition

  I have a DAQ hardware that measures 0-10 volts of input. We measure a signal that goes from 0-15 volts, so we atenuating the signal by a factor of 2.  MAX I created a scale with a slope of 2 who should be able to display the 0-15 Volt input voltages, and charts that display this show is OK, so I guess that voltage, put out of the unit is actually in the range between 0-15 tensions due to the scale factor.  If I go into the properties of chart box I notice that there is another selection for establishing yardsticks for the graph itself. And when I put a scale factor of 2 in the multiplier, the scale on the graph goes to 0-40 instead of the original 0-20 as done through the scaling done by MAX.  Am I had reason to suppose that the DAQ of origin output is still 0-20 and that the scale itself has been changed without affecting the original such as configured in MAX range?  In many of my graphics, I have a total of 3 plots shows each chart where two of the parcels are voltage 0-10 volts and the third parcel is shown tied to a second temperature scale, which would have a range between 0 - 8000 degF.  I noticed that to create this scale separated, I had to first make a double scale and Exchange over the other side of the graph and the value scaling on this scale of appropriately and to do the original scale invisible so that only the temperature present with the correct range, since the original, invisible voltage scale should now be 0-20 volts and temperature should be 0 - 20000 degF.  It seems to be the thing to do to make the graphics appear with temperature scale correctly even if voltage to measure levels of 0-20 for all plots on the chart.  Sounds OK?

  Yes, I went in MAX and changed the input range for 2 X scaling of channels + 20 &-20 volts like you mentioned, but I get always around 10.86 VDC as data for 2 X channels across and 9 VDC for the 1 X channel scaling! Yes, I do tend to ramble on, but bear with me as I worked on this problem of scaling for the last week and it showing the correct data range is the only thing left to complete the thing.

• data Dynamics attribute Subvi

  Hello

  I am faced with this weird problem with a Subvi, "set attribute dynamic data. When I place it on the block diagram, it disappears as it moves to the right. It is functional, although I see not the icon of this sub - VI, if I have that exceed certain area on the block diagram. I'm using LabView 2010 SP1.

  Clues,

  Thank you
  Deepak

  What is your block diagram?

  I don't think there is a limit to the area, you can make your block diagram, and if you start moving things out of it, so they cannot be seen.  But if you do not run this problem, then your block diagram is way more than what it should be.

  EDIT: I found this thread http://forums.ni.com/t5/LabVIEW/Labview-block-diagram-icons-became-invisible/m-p/1119751#M494353 he's talking about.