Invoke the card works when debugging test but not what device installed

Similar Questions

• The code works in debug mode but crashes when compiling in release mode

  I am facing the following problem. I have code that works well when it is run in debug mode. However, when I compile it in release mode and run the executable file, code freezes and does not work. The code acquires images from a camera of Hamamatsu. In debug mode, I'm able to acquire images permanently. However, in the release version, the code crashes after the acquisition of the first image.

  I use version 7 of LabWindows/CVI.

  I would be very happy if I can get any help/suggestions for this problem?

  Thank you!

  Kind regards

  Kaddour

  Neji:

  If you search this forum for "version crash debug" or "release version crash" or other similar expressions, you will find that it is a fairly common question.  Look through the other posts that you find here to see if something applies to you.

  The debug version does a few things like padding variable, then you can sometimes invaded your space variable declared without crushing the next variable.  In the statement, the variables are packed, so if you invaded one, you replace another.  Just a possible difference.

  You can do some things in your exit code to see where things get lost, as (temporarily using printf after several instructions at beginning and end of your loop to try to identify this failure of line of code.)

  Look through other threads for other ideas.

• Why the button works only in test scene, not test animation?

  Hi all, I have a very frustrating problem with my flash project.

  I have two scenes in my flash animation, each of them has a lot of links and navigation within itself. And there is a button that takes you from one scene to the other.

  When I test scene 2, everything works fine. However, when I test the entire film, scene 2 navigation will not work and there is no error!

  Did someone just thought about what goes wrong?

  I use Flash CS6.

  Thank you!

  Change the mouse to MOUSE_DOWN event type, i.e.:

  StoreHomeBtn.addEventListener (MouseEvent.MOUSE_DOWN, StoreHomeonClicked);

• moving the mouse over the edge works for guest XP but not Linux

  Hi all

  My configuration:

  VMvare Workstation 6.5.2

  Host: Ubuntu 8.10

  Comments n.1: Windows XP

  Comments n.2: Debian 5.0 Gnome

  Both have the latest version of installed vmware tools

  With Windows XP guest, moving the mouse on the window border back the pointer to the host OS.

  With Debian, I can't do it and to do the combination of SHIFTaltctl

  Restart the tools with the init script gives no error, and ps ax | grep vmware reports

  4303?        SS 0:00 / usr/lib/vmware-tools/sbin32/vmware-guestd - background /var/run/vmware-guestd.pid

  So it seems that the tools work properly

  This virtual machine has been configured to nothing a few days ago, so not embusked files/configurations or upgrade issues.

  Can anyone give me a tip?

  Thank you

  Auto enter and ungrab is done with the vmware mouse driver.

  It would appear according to your disscription that your xorg.conf file is not configured to use vmmouse vmmouse drive is not installed or installed in the wrong directory for your configuration.

  File xorg.conf post

• My Wacom Graphire4 graphics tablet works only with the pen pressure, OK in CS5 but not CS6...

  I am Windows 7 Professional 64 bit and still have the CS5 and CS6 64 bits loaded.  I've used my tablet with stylus Graphire4 with CS6 will detect all problems.  All of a sudden it only works with the pen pressure even if the stylus pressure is off.  I'm trying to use it as a mouse and frequently use shift/click when you change a mask.  I can do it no longer.  If I run CS5 the pen works as it should but not CS6.  When I first open the CS6 with visible brush the brush palette shows a hard brush, but when I open a file it turns into sensitive pressure without measure by me.  I have reset the brushes, re-installed the driver and finally downloaded a driver more but the problem persists.  Because it works very well in CS5 but not CS6 it must be a problem to Adobe.  It's very frustrating.  I enclose a composite image showing what happens to the CS6.  The right side shows what looks like the brush palette until I open a file.  The left side shows what happens when I open a file.   Even if I do not open a file and make changes within the brush palette, it immediately turns to pen pressure.  It's very strange.

  I would of course someone can provide information that could help.

  Kind regards... Ralph

  

  No answers, but in the meantime, I have come into contact with Adobe.  Problem has been resolved by phone.  Resolution is to delete the preferences file reopen CS6, date at which the PS automatically creates a new preferences file.  It was she, corrected a problem... Ralph

• The data are stored in the DB for the Jdeveloper test, but not in the dev environment

  The data are stored in the DB for the Jdeveloper test, but not in the dev environment

  Hi all,

  IM new with OFA and Im working with Jdeveloper, I create a form to store information using a VO and EO and add information to the current line using the attribute set of function, I noticed that when I lunch the update in the jdevelopher data is OK in the comic book, but when I install the development in the DEV environment the data stored using java code does not the table, only data that are related by the object as text fields and others.

  This is the code that I use for SAP data, it works in jd, but not in the dev environment

  {} public void saveData (String responsabilidadID)
  int respId = Integer.parseInt (responsabilidadID);
  OAViewObject vo = (OAViewObject) getQuiebresComercialesVO1 ();

  vo.getCurrentRow () .setAttribute ("ResponsabilidadId", respId);

  getTransaction () .commit ();
  }

  Any there who encounter this type of problem, something I can check?

  Thank you all.

  Just check if you bounced the server after you deploy the code. Objects Java would not reflect the changes, unless the instance is bounced.

• OfficeJet 6600. Works as a printer, but not able to start the scanner.

  OfficeJet 6600. Works as a printer, but not able to start the scanner.

  I am facing a strange behaviour of my camera. I tried to find similar problems on the forum, but did not succeed.

  I started it 2 days (near my 5610 old which seems to have problems of aging). I use a Sony VAIO PC, OS Win7-Pro, updated.

  Running the appliance following the instructions of the poster. Presents the installation CD. Wireless net was successful and the screen of the device is to give the corresponding IP address.

  But this IP has realized the configuration SW is not recognized. I tried thousands of times, switching and on different devices (router, printer and pc) in the order required, uninstall and reinstall the device.

  However, despite the property intellectual not recognized the device functioning as a "printer".

  But I need to use it as a scanner.

  Procedure by selecting the "scan to PC" screen of the device (only available as an option) I get the message "to ensure that the feature is turned on" and I am prompted to 'open the printer HP SW,... '. ».

  Go to Windows and by clicking on "HP SCAN" in the HP/HP Officejet 6600 directory I get the a warning window stating "HP Officejet unidentified 6600.

  Can someone, please?

  Thank you in advance.

  Hey,.

  Try this document! A "no computer has detected" or "Connection error" message when scanning for HP Officejet 6600 e-all-in-one and 6700 Premium e-All-in-One Printer Series (H711)

  Have a great day!

• Stand By worked in XP Home, but not XP Pro SP3 on the same machine

  Stand By worked in XP Home, but not XP Pro SP3 on the same machine.
  How can I get Stand By under XP Pro SP3?

  * title Moose - see http://stlcc.org/SYS/Standby.bmp for the issue.*

  Hi srfpala,

  I suggest that you manually download and install the latest drivers for the graphics card graphics card or computer manufacturer's website and check if it helps.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  If fails it above step can refer to the article below and try the steps mentioned, check if it helps.

  How to solve the problems of hibernation and standby in Windows XP

  http://support.Microsoft.com/kb/907477

• Hi there, when I drop my photo in photoshop it disappears, it shows in the layers that it is there, but not in my screen

  Hi there, when I drop my photo in photoshop it disappears, it shows in the layers that it is there, but not in my screen?

  Hello

  May I know if you use mac or a window.

  If you are using windows, please check the color profile assigned to the monitor, it could be because of the corrupt color profile.

  • Right-click anywhere on the desktop, and then choose the screen resolution
  • In the resolution of the screen the dialog box click the parameters in advance
  • The graphics card settings box will be the opening upwards
  • Go in the color management tab and click on color management

  

  • Click Add at the bottom, if this button is not highlighted check the option 'use my settings for this device'

  

  • In the next screen, provide you a list of the color profile. Scroll down and choose "sRGB IEC61966 - 2.1"

  

  • Click ok in each window.

  Restart Photoshop, and then try again.

  Thank you

• Why the HDR toning work with some pictures, but not for others?  I have CS6.

  I have Photoshop CS6 and when I go to HDR toning, it is only highlighted for work with some photos, but not others, why?  Thank you.

  HDR toning does not work with CMYK images. Change the RGB color mode, and then you will be able to use HDR toning. It also works with the color to grayscale mode.

• How to disable the backup works when you print an email?

  How to disable the backup works when you print an email.  Whenever I try to print an e-mail, save it as a PDF is displayed.  I then have to save, then open the file to print.

  Hello

  Thanks for posting your query on the Microsoft Community.

  To disable this feature, you need to uninstall Adobe reader and then check if still back you the question quickly.

  Kind regards

  Jesinta Rozario

• I installed the police of San Francisco system. his work in other applications, but not adobe, Ps and Pr

  I installed the police of San Francisco system. his work in other applications, but not adobe, Ps and Pr
  What... do not know any solution.

  Hello

  Please try to post your query in communities:

  General discussion of Photoshop

  Illustrator

  Premiere Pro

  Kind regards

  Sheena

• How do I programmatically load and show the façade of a vi but NOT run it?

  Is it possible to load and display the front panel of a vi but NOT run?  I start with the AsynchronousCallAndForget.vi from the example finder and inserted a node invoke with the Open FP method call before the starting node the asynchronous call. The vi that I'm loading has the "Run when opened" unchecked and the menu bar IS visible so I can manually click the run arrow. Thank you!

  

  Why do you use the asynchronous call? If you simply open the VI reference, then call the FP. Open method, it works very well. You can then call the VI run method which wait until is set to false if you want to execute asynchronously, it is how we did in ye olde days before we have this fangled tricks "Start Asynchronous Call.

• Why my AS3 code working in 1 project, but not in another?

  I had a small project by working with simple buttons that worked very well. I had to restore my project and now it does not work. Ive cut all new code that I added and it did not work. I made a completely new project and copied the layers I'm testing and just the code that had the first working draft and it did not work either. any suggestions on why this might happen?

  This can be a bit of a twist when it comes to understand because this is what I consider an anomaly of the Flash.  If you have different instances of the same object in the adjacent images, then the object the latter will inherit properties of the thing seized.  Sometimes it works to your advantage and sometimes it will leave scratching you your head trying to solve a problem.

  You have shown just in case, you have an object in the frame of 30 and I guess it is the same object that is in frame 1.  Based on what I just explained as an anomaly, even if you were to remove the name of the instance of the object in the frame of 30, or call it something else, it will persist with the name of the instance assigned to it in box 1.  Try it and see - it should always work.

  However, if you interrupt (that ness adjacent) regarding placing a keyframe empty between frame 1 and 30, you will find that the button no longer works in the frame of 30.  He is most associated with the earlier proceedings.  To get back to work, you reassign Auditors properties.

• yesternight I tried to improve my S5 iphone for a new virsion so at the end he asked me my icloud and the password I remember my password but not my icloud so I need your help please

  Yester night I tried to improve my S5 iphone for a new virsion so at the end he asked me my icloud and the password I remember my password but not my icloud so I need your help please.

  Seems that Apple has temporary problems with their activation servers. Many users report similar problem on older devices.

  Latest news: If you can not activate your iPhone, iPad, or iPod touch after installing iOS 9.3 - Apple Support

  r http://www.IMore.com/Apple-Working-iOS-93-Fix-Older-iPhone-iPad?utm_medium=Slide & utm_campaign = navigation & utm_source = im

  lder-IOS-devices-affected-by-bricking-bug/ http://9to5mac.com/2016/03/24/Apple-releases-New-Build-of-iOS-9-3-for-Users-of-o

  Hoppefully Apple will highlight the top soon.