Invoke the mail to send the html page, as in the body of the email
Hi all
Please can I know how to do the html code to display as such in the mail application before sending
I use this method to call the application
Invoke.invokeApplication (Invoke.APP_TYPE_MESSAGES, new MessageArguments (MessageArguments.ARG_NEW, to, subject, body));
Here the body is contained html of the page
but this isn't poster in html format in the veiw can all help
Sending HTML emails programmatically is not currently supported. Only the plain text.
Tags: BlackBerry Developers
Similar Questions
-
invoke the email in the test field
Hi guys,.
I have a question about how to add an email from the owner to a text field in the different object? I must add the e-mail owner account to the text field short of K1
The function below to get the owner body but how can I add the email to condition
JoinFieldValue ("< time > ', [< OpportunityId >], '< owner >'")
and to get the e-mail address of the owner of a record
JoinFieldValue ("< time >', PRE (" < OpportunityId > ' "),"< EMailAddr >")
I am getting error with this code:
JoinFieldValue ('< Opportunity >', [< OpportunityId >], '< Owner >'), "< EMailAddr >")
Thank you very muchYour application, I don't know if you are trying to access account owner or opportunity. in any case, looking at your code, it seems you were trying to get the e-mail address of the owner of the opportunity. If that is correct, use
JoinFieldValue ('', JoinFieldValue (' ', [ ], ' '), ' ') If you want the email address of the account owner, simply change the
JoinFieldValue ('', JoinFieldValue (' ', [ ], ' '), ' ') -
original title: WINDOWS MAIL
I USE WINDOWS MAIL. I CAN RECEIVE AND SEND email, BUT WHEN I TRY to SEND a PAGE OR a LINK TO ANOTHER email this ADDRESS ARE NOT highlighted in THE MENU DEROULANT, SO I CAN'T SEND THEM.
See if this can help, its OE but the problem is the same: Microsoft Knowledge Base. Q306098
See the section on changing the Windows registry and replace Windows Mail in paths where it says Outlook Express as follows:
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in WindowsTo add the data string to the default mail client key:
- Start the registry editor; Click Start, click run, and type regedit.
- Look for the following key in the registry:Mail HKEY_LOCAL_MACHINE\SOFTWARE\Clients\Mail\Windows
- In the left pane, click Windows Mail. Both values should be displayed in the right pane: one is by default, which has a value of Windows Mail, and the other DLLPath, that contains the path to Msoe.dll on your computer.
- If the DLLPath value is not present, click Edit, point to newand then click string value.
- New value #1 appears, with the selected text. Type DllPath, and then press the ENTER key.
- Double-click the new value of DLLPath to open it. In the value data box, type the path to the Msoe.dll file on your computer, for example:: \PROGRAM FILES\Windows Mail\MSOE. DLL
- Click OK, and then quit the registry editor.
- Try to send a mail to a link or another program
Also make sure WinMail is default under control panel | Default programs.
Steve
-
Invoke the email with the subject
I invoke with pre-populated email to: and subject: fields.
query: {InvokeQuery}
mimetype: "text/html".
invokeTargetId: "sys.pim.uib.email.hybridcomposer".
invokeActionId: "bb.action.SHARE".
URI: "MAILTO:[email protected][email protected][email protected]&SUBJECT=A%20SUBJECT&BODY=THAT%20BODY".
}
The result is that the uri is invoked as the body text of the e-mail.
Try my code:
InvokeActionItem { title: qsTr("Email") query { invokeTargetId: "sys.pim.uib.email.hybridcomposer" invokeActionId: "bb.action.SENDEMAIL" uri: "mailto:[email protected]?subject=Hey!&body=w00tw00t" } }
-
How can I make copies of individual pages of a 11 page layout created in Microsoft Greetings 2000 to insert in a file in My Documents to use and insert into individual emails to people who NOT Microsoft Greetings 2000?
Hello
You can try to take screenshots and send emails. Follow the article to take screenshots.
http://www.Microsoft.com/windowsxp/using/setup/tips/screenshot.mspx
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Invoke the E-mail with attachment
Hi guys,.
IM I invoke the email with a built-in attachment application.
I read to analyze the data in the JSON Format to the InvokationRequest, but I'm not sure how exactly to proceed.Here's what I have so far
InvokeManager invokeManager; InvokeRequest request; request.setTarget("sys.pim.uib.email.hybridcomposer"); request.setAction("bb.action.COMPOSE"); request.setMimeType("message/rfc822"); QVariantMap mail; mail.insert("to", QUrl("[email protected]")); request.setMetadata(mail); InvokeTargetReply *reply = invokeManager.invoke(request);
AFAIK, this should add the address [email protected] mailto-field, but it's not.
Does anyone know what im doing wrong or what is missing.
THX
Smolof
Sorry for the delay. Here is how I got it working this morning.
void InvokeEmail::sendEmail() { InvokeRequest request; request.setAction("bb.action.COMPOSE"); request.setMimeType("message/rfc822"); QVariantMap data; data["to"] = (QVariantList() << "[email protected]"); data["subject"] = "This is a subject"; data["body"] = "Hello there, things are great!"; QString logpath = "/accounts/1000/shared/documents/test.pdf"; QString logpathEncoded = QString(QUrl(logpath).toEncoded()); qDebug() << "## LOG PATH: " + logpathEncoded; data["attachment"] = (QVariantList() << logpathEncoded); QVariantMap moreData; moreData["data"] = data; bool ok; request.setData(bb::PpsObject::encode(moreData, &ok)); m_invokeManager->invoke(request); }
-
How to invoke the default mail app in BlackBerry
Hi all
Is it possible to invoke the default BB from code messaging application? In my application, I just need to invoke the email application when you click on a button. Please help me.
Thank you much in advance.
This should help:
http://docs.BlackBerry.com/en/developers/deliverables/11935/Create_new_populated_email_msg_565427_11... -
Please help send an email with the html page in the body
I need an html page on the body of an email to send a blast to send to our customers.
HTML emails can be a bit complicated. You can design in Dreamweaver, but you shouldn't really have to send emails of mass through to your personal e-mail account (or your company account). Could you put blacklisted by spam filters in the company and make your pretty useless email addresses.
Mass emailings (more than a few hundred addresses) I use http://www.icontact.com.
You can build the email through their site (without DW) or you can import your DW html file to their service.
Some things to keep in mind with the HTML email...
1. the use of absolute links to the images and files on a server you control
2. use a limited amount of inline css (no external css or integrated)
3. specify in table based layouts, css support is spotty at best with email clients
4. the
will be eliminated a number of email clients don't rely not on what it is between theTags makes to your recipients5. do not use an email only to images. HTML text is very important to keep from being labeled as spam, make the secondary images in the message, many email clients will not download images without permission of the user
6. include a link to unsubscribe so people can get off your list
There are more things to watch, but who are the biggest. Here are some other good info: http://alt-web.com/Articles/HTML-Emails.shtml
-
Is it possible to invoke the mail app to send a pin message?
Hello. I need to invoke the e-mail application to allow the user to send a pin message. Currently, it seems that you can only do for sms and emails.
Is there a way to put a flag or something saying the BONES it's a pin message?Thanks in advance.
If you send the message to a PINAddress, rather than an address, a PIN message.
See the documentation for the API for PINAddress.
Code looks like this:
try { pinReplyTo[0] = new PINAddress(pin,name); newMessage.addRecipients(Message.RecipientType.TO,pinReplyTo); } catch (Exception e){ System.out.println(e); }
-
Send requests to page .html to the ColdFusion application server
The way I understand it, web browsers send all their page requests on the web server, which in turn identifies which pages must be processed by an application server (e.g., CFM, ASP, etc.) and sends the request to the appropriate application server. The server application then processes the request and returns HTML (usually) and the web server then presents to the client. Is it possible to change a parameter to .html or .htm files are send to coldfusion for processing in addition to .cfml (in Microsoft IIS)? If so, does anyone know of a section of howto out there? Just curious.
Just found this article on the use of ISAPI rewrite to accomplish a number of wonderful transformations. Mainly:
http://host/somepage.html -> http://host/somepage.cfm
and
http://host/somepage/varvalue -> http://host/somepage.cfm?var1=varvalue
http://www.bpurcell.org/blog/index.cfm?mode=entry&entry=1070
-
Invoke the app e-mail activity
I use the PlayBook Simulator to test my android app. I can't test capacity sending html email. I use following code to send an email in current android app.
Intent intent = new Intent (android.content.Intent.ACTION_SEND);
intent.setType("text/html");
context.startActivity (Intent.createChooser (intent,
getEmailChooserTitle()));This code works fine on android devices (present a list of applications that can send an email, and when you select a watch application compose e-mail, etc), but when this test on Simulator PlayBook, he does not display any app list or compose e-mail screen.
Is there another way suggested to send e-mails via PlayBook?
Thank you.
Hello
Unfortunately there is no support to compose and send the email from the Android Runtime for BlackBerry PlayBook. BlackBerry 10, we support the possibility of invoking the native email make up the card, which allows the support you're looking for.
See you soon,.
-
This problem is apparent in recent months, it must be modified with an update or other. I'm kinda a non-techie so please help as laymans.
Thank you very much!
Hi Zenos,
According to the email, which reads:
OK, that came through in HTML format. And the lower part of the delimiter is indeed in a monospaced text, probably "preformat".
You mention "when you use an email and not the other two', which suggests to me still more troublesome case, there is a residual signature. Must be defined a separate signature for each account, then maybe you haven't checked all.
In account settings, go into each account settings and in the space of his signature, do ctrl + a to select the entire document (nothing changes color?) then click on delete to delete it. And make sure that the account settings does not reference any external signature file.
You have additional modules? I can afford to be quite laissez-faire everything that is in the signature boxes I use Signature Switch to manage signatures at point of use (which she draws independent files), so this replaces everything else. This add-on has not tried in your experimentation?
Using the add-on stationery or templates? These may introduce a predefined signature passing easily unnoticed.So I did as you suggest, ctrl + and there has been nothing of apparent or any change of color, but I hit 'delete' anyway.
Nothing seemed to be happening so I opened a new page in e-mail to search again for an answer and then I realized that the delimiters were gone!
PROBLEM SOLVED! -A big thank you to you and also Matt for your answers and comments. -
I need to send e-mail to climb what is the email address of support?
I need to send e-mail to climb what is the email address of support?
Click on contact us at the bottom of this page to join Apple
-
All-in-one HP Officejet 2620: how to digitize information and join the e-mail to send the
Need to know how to analyze the doctors note then attach to e-mail sent in response to a request to Office
Hi jm12
You must first install the printer and install the printer software.
You can do the following:
1 lift the scanner cover and place the note from the doctor face down. Close the cover
2. on the homescreen of the printer, press "Scan" and then choose "Scan to computer".
3. it will will start the scanning process
4. once the analysis is complete, you can attach the file to an e-mail and send it back to the Agency.
Here is a link to the detailed user guide the procedure of scanning the computer is on page 30.
I hope this helps. Thank you!
-
Mail send and the body of the email and the attachment to ATG.
Hi all
Can any body explain to me how I will send an email with the body of the email and attachments in ATG.
Thank you
Chadnra mohanYou can use atg.service.email.MimeMessageUtils or javax.mail.internet.MimeMessage (both are under Message classes).
You can set the body to aid below extracted.
Message MSG = MimeMessageUtils.createMessage ();
msg.setText ("your body of the email");You can define the setting and the content using below extracts.
define the content of the message: message to multiple parties + attachment
ContentPart happy [] =
{New ContentPart ("it's clear","text/plain" ""),}
{New ContentPart ("this is text html" , "text/html")};
Attachment of files = new File ("attachment.html");
MimeMessageUtils.setContent (msg, content, seizure, false);All of these are clearly explained in the link below.
http://docs.Oracle.com/CD/E24152_01/platform.10-1/ATGPlatformProgGuide/HTML/s1013creatingjavamailmessages01.html
Thank you
Gopinath Ramasamy -
change the size of the swf according to the size of html page
Hi experts
I want to change my swf size according to the size of the html page in which she opens
such as if the page size is 1024 x 768 then swf should scale to this size
If its 700 per 500 also sw should change its size is possible
I want this for my animation initially FRO m edge on the page
Basically, I do not know how this has tried various options for last week no chance
There are 100% option for swf that will scale the size of the swf to 100% of the page, but it does not toedge of page edge
can anyone helpQuote:
Posted by: newsgroup user
Thanks urami who workedDarr_darshan wrote:
> Hi experts
> I want to change my swf size according to the size of the html page in which it
> open
> such as if the page size is 1024 x 768 then swf should scale to this size
> If its 700 per 500 also sw should change its size is possible
> I want this for my animation initially FRO m edge on the pageFirst of all, the size of the screen is never the same as the size of the browser to not use if
you want to keep the proportions when scaling your files and do not distort the
content. Keep in mind that the browser has its chrome all around, more grand, being on top
of the screen (navigation), bar State and borders on the left and right sides.
Second, always resize movie to the top, never down. While the scaling of movie you able to
Keep your text, not the case when you descale movies especially with small text.
who become illegible. Then you make movies in (example) 600 x 400 and intensify their
instead.To fill the browser window, go to file - publish setting and on the HTML tab
change the PIXEL size of PERCENT and set 100% x 100% - publish.
Open the published html document recently opened in your favorite HTML editor, such as Notepad.
Dreamweaver and Frontpage, adjust the margins up, down, left and
right to zero pixel. This will make it fill the window entirely. Flash is
not give this possibility.--
Best regardsUrami
--
!!!!!!! Merry Christmas!
&
Happy new year
If you want to send me a message - DO NOT LAUGH at MY ADDRESS
Maybe you are looking for
-
Viideo on html MAC OS - black screen
MAC OS: 10.11.6 Safari: 9.1.2 New retina pro MAC (and I am new to the MAC world) I can't see the video embedded in a html page. I just get a black screen. The same video works on windows VM on this same laptop YouTube video work. Thanks for your help
-
Need driver modem for Satellite 2400
Hello I'm looking for Toshiba Satellite 2400 PS240C - 00UJXP Modem Driver modem driver.Serial number: 621165P. Made in the Philippines. My operating system is Windows XP Service Pack 2.Please give me the link to download the same. Thanks a ton. Kind
-
How to align to the left the url in safari browser?
I want to align to the left of the uRL in the browser of Safri so the favicons are visible and also if I can edit a long URL
-
can not change back to original settings
Hi, I changed the settings on a VI under the "appearance of the window" and clicked on the option of dialogue. Now when I open the VI, I can't change anything. How can I change back so that I'm able to edit the VI? Thank you
-
Hi all... I HAVE WINDOWS XP PROFESSIONAL FOR 7 YEARS NOW. WINDOWS UPDATE NEVER GAVE ME ANY PROBLEMS. HONESTLY, I'VE TRIED SO MANY THINGS, INCLUDING READING AS WELL... BEFORE IT WOULD DISPLAY AND I CLICKED ON SEARCH FOR UPDATES AND HE BEGAN HIS RESEAR