IOM - rule AD Recon

Similar Questions

• IOM-recon rule

  Hello
  
  How will create a recon IOM rule that will make reconciliation based on userid = employeeNumber condition where employeeNumber is an optional attribute to OID.
  
  When I go to create a recon rule, I don't get employeNumber in drop down

  Do you have any field in your form to process for employee number?

  And is employed only comes from OID?

  If Yes to both, do the mapping to employeenumber with this process for the field.

• References for the development of rules of reconciliation for IOM 11 GR 1 material

  Nice day!
  
  Hi people!
  
  I would like to ask if you can share some references or any document which addresses the development or creation of rules of reconciliation for IOM 11 GR 1 material. Currently, we are trying to draw users to an SAP system and available to MS AD. Currently, we want to develop reconciliation rules such that we can avoid making ad-hoc manual link.
  
  Apart from the documentation guide, are there any other available reference to help us develop rules of recon a simple definition and there may be, we can seek to define a complex?
  
  All answers are appreciated.
  
  Thanks in advance!
  
  Kind regards
  Jeff

  very limited driver support reconciliation rule. find the link below
  http://docs.Oracle.com/CD/E11223_01/doc.910/e11217/cnnctrcmpnts.htm#CEGJHBDC

• Linking the existing user represents their newly created accounts of IOM

  Hello
  
  We implement IOM to an organization where we use their HRMS as the trusted source for reconciliation. Now, the scenario is that, as of today, all users in the Organization have their user accounts created in different applications which are now included in the IOM.
  
  Now, that we carry out reconciliation with their HRMS, the user accounts are created in the IOM.
  
  As these are newly created user accounts, their "resources" tab will be empty. What we want to do is to connect the accounts of existing users of these applications to their identities from user to IOM. So that when you open the "resources" tab, we see what resources are allocated to the user. Please note that these are their user accounts for resources that existed prior to the introduction of IOM.
  
  Early response will be very useful.
  
  Thank you.
  
  --
  UZ

  For each resource, you need to configure the recon fields and mappings. Configure the rules action recon and reconciliation rule. Mark a field as key for process mappings. Then, when it is configured, click on the button create a recognition profile. Now, when your incoming events correspond to your configurations, it will link the resource to your username.

  -Kevin

• Reconciliation of the IOM

  Hi all
  
  IOM is supplied to AD and Exchange and I can't see the resource information in modules of resources through the IOM web console. There he shows two resources as implemented. But after reconciliation, a line of resources more Exchane showed information on the User Info page. (I think, IOM established a link to Exchane for the same user). Rule Exchane Recon is how ever UserLogin = samAccountName
  
  But in this case, userlogin = 1234 and samAccountName = i1234 (the two are not equal). Then how her be reconciled and the link with the same user.
  
  Please suggest me. I have to stop the construction of this single resource exchage more for the same user.
  
  Kind regards
  G. love

  There will be no problem as long as the resource points to the correct information of the target and the connection.

  -Kevin

• "No matches found" status during a manual linking in Recon Manager

  Hello
  
  I have a custom connector, and the process shape contains only first name, last name, ID and password (four fields). Only name and user ID are required in the form of process.
  
  I filled the UserMap FirstName, LastName, and UserID. In addition, the server name and the State (provided).
  I use the following code to bind the user to the target. It does not - in the Recon Bishop, is to show that "no matches found".
  
  long reconKey = reconUtility.createReconciliationEvent (Users_Object, reconDetails, true);
  
  Then, I checked Recon rules, process definition and object resource definition.
  
  I added the rule in the rule Builder Recon. (User login is USER ID)
  I added the recon rules in the RO (No Match Found-> Assign to Admin, a successful match-> link the user).
  Recon class mappings are fine in the process definition.
  
  Thought, this could be the cache - rebooted IOM - still no luck.
  
  No idea why I still get the "No Match Found"?
  
  Concerning
  Vijay Colin

  When you create a Recon rule, they are not active automatically. Once you save your recon rule, refresh it, then check the box to activate and save again.

  -Kevin

• Get the exception after starting the server of the IOM

  org.quartz.JobPersistenceException: unexpected runtime exception: null [see nest
  [Ed exception: java.lang.NullPointerException]
  to org.quartz.impl.jdbcjobstore.JobStoreSupport.doRecoverMisfires (JobSto
  reSupport.java:3042)
  to org.quartz.impl.jdbcjobstore.JobStoreSupport$ MisfireHandler.manage (Jo
  bStoreSupport.java:3789)
  to org.quartz.impl.jdbcjobstore.JobStoreSupport$ MisfireHandler.run (JobSt
  oreSupport.java:3809)
  Caused by: java.lang.NullPointerException
  at org.quartz.SimpleTrigger.computeNumTimesFiredBetween (SimpleTrigger.ja
  will: 800)
  at org.quartz.SimpleTrigger.updateAfterMisfire(SimpleTrigger.java:514)
  at org.quartz.impl.jdbcjobstore.JobStoreSupport.doUpdateOfMisfiredTrigge
  r(JobStoreSupport.Java:944)
  to org.quartz.impl.jdbcjobstore.JobStoreSupport.recoverMisfiredJobs (jobs
  toreSupport.java:898)
  to org.quartz.impl.jdbcjobstore.JobStoreSupport.doRecoverMisfires (JobSto
  reSupport.java:3029)
  to org.quartz.impl.jdbcjobstore.JobStoreSupport$ MisfireHandler.manage (Jo
  bStoreSupport.java:3789)
  to org.quartz.impl.jdbcjobstore.JobStoreSupport$ MisfireHandler.run (JobSt
  oreSupport.java:3809)
  
  
  Please suggest...
  Kind regards
  KK
  >

  It is because of acknowledged problem. IOM has many recon processes. Such a process is working to synchronize LDAP-IOM happening behind the scene.
  It may be a problem with the "table trigger value" depends on what recon craft. If 'trigger set to table' is not set correctly, you can get this number.

  Do this work around:
  http://identityandaccessmanager.blogspot.com/2011/08/reconciliation-issue-misfirehandler.html

• Definition of default password to all users in IOM

  Hello
  
  I want to set the password by default for all users of provisioning in IOM through trust recon.
  
  Please let me know how to achieve this.
  
  Thank you

  Follow my above code (you can use the same as it is). You must write your code in bulk as well run and loops through each user

  public BulkEventResult run (long processId, long eventId, BulkOrchestration bulkOrchestration) {}

  iterate over each user

  }

• Recon of LDAP password

  Hello
  
  IOM does not recon of the Sun Java directory server passwords? I trust a recon of the DS and would like to reconcile the passwords of the DS as well during initial load. Is someone can you please tell me how can I achieve this?
  
  Also, I was able to reconcile users with blank passwords in the IOM. How does IOM to this, because the password is a required field when creating any user. How IOM fill passwords in this case?
  
  Thank you
  PETREA

  Passwords are not matched in the IOM, passwords are usually encrypted and there is no need to reconcile.

  OOTB when you do a reconciliation of trust, such as password is mandatory, IOM defines the same as the user ID password.

  In case you want to set your own password, create an adapter of the entity and set in insert before generating a password as and when a new user is created.

  Thank you
  Suren

• Reconciliation in IOM?

  Hello friends
  
  I am new to Oracle Identity Manager. I'm going through its tutorials and docs, but I don't get the concept of reconciliation.
  
  If anyone knows it please inform me.
  
  
  Thanks and greetings
  DB

  Hello

  Full Recon used for the creation of original data or loading data from IOM. In full reconciliation you just pull all the users of the trusted resource and push the IOM. Full Recon is mainly a time activity.

  While additional recon used in the existing system were you have a set of users and you update frequently or you need basic. Any changes made to the profile of the user to the resource of trust should reflect in IOM this may through incremental Recon. Incremental Recon on specific interval and update all changes in the IOM that happened after the last recon on trusted resource.

  Key points for full and incremental Recon as below;

  Full Recon:
  1. first data loading
  2. create the user in IOM
  3. a time activity
  4 example: flat file, database, People Soft

  Incremental Recon:
  1. scheduled task to run at regular intervals
  2. create and update the user in IOM
  3 example: Recon, People Soft, AD data

  Let me know if you need further information.

• OIM11g - remove the link between the user and the account

  We have configured a rule wrong Recon for a resource and then run the task of reconciliation on a limited number of users; the result is that these users are connected to the target system wrong accounts.
  Now, we have configured the right Recon rule, but we do not know how to clean/delete the 'link' created for users to reconcile, we want to run a new reconciliation from scratch.
  Is this possible?
  Can anyone provide a detailed guide of the how-to (step-by-step)?
  
  Thank you
  Gabriele
  
  Published by: user1175296 on June 29, 2012 07:50
  
  Published by: user1175296 on June 29, 2012 08:05

  user1175296 wrote:
  Hi madhatter.
  I agree with you and I will use the OIMDAO, but for more information and to make a test in the DEV env, can indicate you the name of the 11 tables that you mentioned?

  Sorry for a slight misunderstanding, I feel the ProcessInstance (ORC) table when talking about about 11 tables in detail. These 11 paintings is as follows:

  OLIVIER ObjectInstance
  BOA Organization2ObjectInstance2ProcessInstance
  Ouedraogo ResourceAccount lastAttestedResourceAccounts
  ORC ProcessInstance childProcessInstances
  OSI TaskInformation
  OTI TaskDetailMisc
  NCE ReconciliationManager
  REQ req. reqs
  RECON_ACCOUNT_MATCH ReconAccountMatch
  RECON_EVENTS ReconEvent
  RECON_CHILD_MATCH ReconChildMatch

  As for the ResourceAccount table (Ouedraogo), here's what I found in the file xell.sql of the distribution of the UCR:

  ALTER table OUD
  Add constraint FK_OUD_OIU foreign (OIU_KEY) keys
  references Ouedraogo (OIU_KEY)
  /
  ALTER table OUD
  Add constraint FK_OUD_OUD_PARENT_OIU foreign (OUD_PARENT_OIU_KEY) keys
  references Ouedraogo (OIU_KEY)
  /
  ALTER table RIU
  Add constraint FK_RIU_OIU foreign (OIU_KEY) keys
  references Ouedraogo (OIU_KEY)
  /

  CREATE TABLE ENT_ASSIGN)
  ENT_ASSIGN_KEY NUMBER (19) NOT NULL,
  OIU_KEY NUMBER (19).
  UNIQUE CONSTRAINT UK_ENT_ASSIGN (USR_KEY, ENT_LIST_KEY, OIU_KEY),
  CONSTRAINT ENT_ASSIGN_OIU_FK3 FOREIGN KEY (OIU_KEY) REFERENCES OUEDRAOGO (OIU_KEY)

  CREATE TABLE ENT_ASSIGN_DELTA)
  ENT_ASSIGN_DELTA_KEY NUMBER (19) NOT NULL,
  OIU_KEY NUMBER (19).
  CONSTRAINT ENT_ASSIGN_DEL_OIU_FK1 FOREIGN KEY (OIU_KEY) REFERENCES OUEDRAOGO (OIU_KEY)

  CREATE TABLE ENT_ASSIGN_HIST)
  ENT_ASSIGN_HIST_KEY NUMBER (19) NOT NULL,
  OIU_KEY NUMBER (19).

  As you can see, there are at least 6 references Ouedraogo in 5 tables.

  I myself prefer to delete process Instances (not ResourceAccount), eliminating all of the artifacts supply resource account, including the data of the form (records in the tables of UD_xxx).

• INFO ON pre process manager events, recon, handler of pre insertion rules

  Hi Experts
  
  Can someone explain these terms what their purpose...

  Recon rules - rule is a condition or a filter that is applied while balancing the user in the IOM. Based on these rule or user record is created or updated in IOM still specified in the resource-> action rule object

  event handler - peace of code executed if certain events (insertion, update/Modify and Delete) or action occurs at the IOM. Very similar to database triggers.

  Now, each event has two floors. Pre or Post.
  Ex:
  Insert before-> it will be executed before something inserted in the database. for example, before the creation of the user
  After inserting-> he will run after something inserted in the database. For example, after the creation of the user.

• IOM 11 GR 2 - linking not Recon user resource account

  Hello
  We have installed ACF2 connector configured LDAP gateway and created an instance of the application. Now I'm making the recon for a single user with the user name in the field "users." When I run the recon, event recon is get generated but the resource account is not related to the user of the IOM. He always says, not tied to any user. I checked the recon rule, tried to create the recon profile, nothing works.
  
  You have an idea?
  
  Thank you!

  Go to the purpose of resource-> rule of reconciliation-> check whther "No Matches Found is related to any". OOTB, it comes with xelsysadm.

  After that create recon profile... and test.

• IOM Lotus Notes target reconciliation - Recon events assigned to the user

  Hello
  
  I have configured the Lotus Notes in IOM connector and I executed the reconciliation of the target for a certain user exists in Lotus Notes, which does not exist in the IOM. During reconciliation, a reconciliation event is created indicating he was assigned to the XELSYSADM user. The next step, I would like to perform is the creation of this user to the IOM, so I opened the IOM system administrator and I connect you as the user XELSYSADM. At this point I opens task list and search for approvals pending or open tasks associated with this event of reconciliation, but there aren't any. Can anyone help? How can I fill this event of reconciliation? How can I create this user?
  
  Thank you very much in advance

  If you want that for no match found, he should go to XELSYSADM then, it must decide what to do whther that the user should be created or not. Then, you can simply run Trusted Recon and change the rule of no match to assigned to XELSYSADM.

  Whenever there is no match then he attributes to XELSYSADM then XELSYSADM can create user if he wants to with the help of the button to create a user.

  But it has a disadvantage as users of Xellerate is used everywhere when we talk about Trsuted Recon, then it will change the rule for scope adapter. You can create dummy resource for recon trust with certain fields even as Xellerate users and return this RO in the HS task attribute. You are finished with your condition.

• IOM multiple order of rule of assessment reconciliation

  If I set more then a rule of reconciliation for a particular target system do all the rules always evaluated by trying to match?
  
  Example [artificial, so please do not ask me why I'm doing something this trivial :)]:
  
  Reconcile with the target AD directory. If I have 2 rules, say:
  
  (1) UIM userid = samAccountName
  
  (2) name = name AD UIM
  AND
  UIM = name AD surname
  
  Do these two rules matches (effectively making the same compound rule containing rule1 rule2 GOLD) or it evaluate a rule and if finds the matches, does not evaluate the second?
  
  If the latter, is possible to control the order in which the rules of reconciliation are evaluated in?
  
  See you soon,.
  Bob H.

  Recon rules are evaluated individually, here is an example:

  You have two users OIM John Doe [JDOE1] and Jane Doe [JDOE] and find a user in your target system through recon with the details of John Doe, JDOE.

  You have then 2 recon rules for your application:
  1 user Login = uid
  2 name = first & last = last name

  In this case, you will get a corresponding user, but the match will be both users. Matching rules are obviously better with unique identifiers and rules that you present that allow ambiguity, the multi more match you will get.

  The example above is difficult, it's really John or Jane? Is there a typo? several rules are evaluated correctly, IOM has taken the event evaluated all the rules of the target object and found two matches. In this case corresponding to the UID would be wrong and you want to really all of the corresponding fields.

  You cannot order or hierarchy rules, IOM assesses all the active rules for an object.

  You can create or rule combinations (your added rules don't need to be active).

  I think this answers your question.

  Ian