Similar Questions

• Help with Contact groups.

  Not a question. It's your comments. Please put this comment as the case failed.

  I asked for help the smart groups and iPhones. The smart group created on my Macbook was not visible on my iPhone. This facility is not provided in your software. Points to note and require correction:

  1. this fact was not apparent in the assistance available on my MacBook. It should be; and if it had been, I would not call you. Please change the help files.

  2. the fact that this one is not planned is a nuisance. Please change the help files to inform users of how to deal with it:-

  2.1 Smart groups can be set up on the MacBook include a word or symbol in the file of contacts, so that all of the contacts in the smart group can be identified. But only in the Macbook.

  2.2 If you want data available on all devices, the Group of the chip to be converted to a group. To do this, create an empty group, select the Smart group and move it to the empty group. The group is now visible and can be changed from all devices.  Remove the Smart group: this will remove only the name of the group, but not the underlying data. Change group names as appropriate.

  Havant a clue wrote:

  Not a question. It's your comments. Please put this comment as the case failed.

  I asked for help the smart groups and iPhones. The smart group created on my Macbook was not visible on my iPhone. This facility is not provided in your software. Points to note and require correction:

  1. this fact was not apparent in the assistance available on my MacBook. It should be; and if it had been, I would not call you. Please change the help files.

  2. the fact that this one is not planned is a nuisance. Please change the help files to inform users of how to deal with it:-

  2.1 Smart groups can be set up on the MacBook include a word or symbol in the file of contacts, so that all of the contacts in the smart group can be identified. But only in the Macbook.

  2.2 If you want data available on all devices, the Group of the chip to be converted to a group. To do this, create an empty group, select the Smart group and move it to the empty group. The group is now visible and can be changed from all devices.  Remove the Smart group: this will remove only the name of the group, but not the underlying data. Change group names as appropriate.

  Apple.com/Feedback will be where you want to send any comments you may have, so it can be seen by the right eye. This is only intended as a basic user to user forum.

• add/delete a contact group message iOS 10

  Can't seem to find how to delete/add contact group message since the update to iOS on iPhone 10 6. Solutions?

  nessrez wrote:

  Can't seem to find how to delete/add contact group message since the update to iOS on iPhone 10 6. Solutions?

  Send a message from your iPhone, iPad or iPod touch - Apple Support Group

  This is possible with an imessage group all users using an Apple device.

  You can't do it for a group message MMS - mix Apple and not Apple device device.

• pouvez iphone with ios 9 use bluetooth 4.1 5

  pouvez iphone with ios 9 use bluetooth 4.1 5

  Hello ajwaka,

  After reviewing your post, it looks like you want to know if the 5 s iPhone supports Bluetooth 4.1. I recommend you to read this article.

  iPhone 5 s - technical specifications

  Cell phones and wireless

  • Wireless Bluetooth 4.0 technology

  Thank you for using communities of Apple Support.
  Good day.

• Problems with Contact synchronization

  Hello

  If I go to contacts, view options, select my account, go to contacts to display all of the items are selected. There are four elements "system group: My Contacts ' and three other defendants for family, friends, co-workers. Where are the system groups created? I have too many groups of parents, friends and co-worker in my gmail contacts (and that is listed separately).

  The reason that I ask is that I am out of contacts on my droid. These contacts have a field name and the field company, are listed in my contacts with google, but not on the droid. They are both ranked in the my Contacts group.

  I don't see a "system of Group: my Contacts" or the other three on my PC. The droid shows 735 contacts, my google page has 'My Contacts 743', all contacts are 865. This has always been a problem, but it wasn't a big deal that I was always able to find people I contacted often. I did a google search, but failed to find anything useful.

  On the Droid, System Group: my Contacts is the same thing as my Contacts in Gmail. Its called a group system because it cannot be deleted and it will automatically contain the contacts of all groups. Friends, family and co-workers are also the same groups for the Droid and Gmail.

  When first the Display Options you select, there is an area for the display of contacts with numbers only, Unselect and see if your missing contacts appears.

  In addition, go to Gmail on your PC and show contacts that are not displayed on the Droid. Is the phone number in the appropriate field? It may be in the field notes.

  Another possibility is that the missing contact was joined with another contact with similar information. The droid will join similar contacts. You may need to do some digging around on the Droid to find them. You can separate them from the Edit screen.

• with the update, my alphabetical order of the contact group got screwed up.  How can I get it organized again

  My iPhone has updated, then my alphabetical order of the contact group got all out or sequence and mixed up.

  How can I get it organized again?

  Hi, Dinyross.

  Please visit Apple support communities.

  I understand that your contacts are not in alphabetical order.  Depending on whether you want to view by the first or last name, make sure that sort and order of two display show all first, last or last, first.

  Contacts settings

  Go to settings > Mail, Contacts, calendars, where you can:

  • Change the way contacts are sorted

  • Display contacts by first name or name

  • Change how long names are abbreviated in the lists

  • Choose to display favorite and recent contacts in the form of multitasking

  • Define a default account for new contacts

  • Set your My Info card

  • Set if the updates and new contacts are automatically derived from mail you receive

  Contacts settings

  See you soon

• How to add Contacts to a shared list/Contact Group of Data Import

  Hello

  Is it possible to add contacts imported using an Import of data to a specific shared list or the contact group? I see that I can do that when I download contacts from Contacts-> download of Contacts, but I don't see a way to do this with a Data Import.

  Thanks for any help,

  Jeremy DeVoss

  Autosynchs in E10 only supports synchronization from a CRM system, or some other very specific sources such as Omniture Remarketing segments. FTP (or SFTP) autosynchs unfortunately is possible to create. Creation of an Autosynch done now under Setup - integration, Inbound, Data Sources - create a new Data Source with the external call. This wizard, as long as your data source is a CRM system, you will create an autosynch at the end.

  However, for your specific use case, this unfortunately will not work. However, to do this, here's what I recommend:

  (1) put in place as usual, importing data

  (2) on the imported file, create a new field in the field with a specific value, something like Source of lead and make the specific value you can filter that these contacts (thus, for example, lead Source = import SFTP).

  (3) create a shared filter to find contacts with your specific value (in this example, the importation of SFTP)

  (4) your filter shared as a charger for a generator program to program to use.

  (5) in this program, click the add to no program of Contact Group to add them to your shared list.

  Its a bit of a work-around, but the only way I think it would be possible at the moment.

• 2SV v. 2FA for Auto unlock with Apple Watch

  Try to set up the auto unlock with Apple Watch on my MacBook Air (fall 2013) after the installation of Sierra. Get this message:

  

  Off the 2SV using applied.apple.com

  

  ... and still get the same message "2FA is required" box "Security & Privacy".

  What I am doing wrong?

  P.S., rescue email Apple ID has not yet been verified, because it belongs to my sister who lives in a very different time zone, but I don't see how this should matter for the automatic implementation of release.

  The message is mainly to tell you that you must enable two-factor authentication, is not that you should disable 2SV. You will need to disable 2SV before you can activate 2FA.

  You should always activate 2FA it to AppleID.apple.com

  I don't know why you don't see the option to activate 2FA here on the Security section. You have a device running El Capitan or later, or a device running iOS 9 or a later version in your list of devices?

  For Apple ID - Apple Support two-factor authentication

• Auto unlock with Apple Watch does not appear in my window security and confidentiality

  "Disable the automatic connection' or Auto unlock with Apple Watch" appears in my window security and confidentiality

  Hello

  Automatic unlocking with Apple Watch is available for the Mac models since the mid-2013 and later running macOS Sierra.

  Check that:

  • Your Mac has Bluetooth and Wi - Fi enabled.
  • Your Apple ID use two factor authentication (as opposed to the two-step verification):
    • For Apple ID - Apple Support two-factor authentication
    • If you are currently using two-step verification instead, follow the instructions here to turn off (under "How can I disable two-step verification?") before you enable two-factor authentication:
      • Frequently asked questions about the audit in two steps for Apple ID - Apple Support
  • Your Mac and Apple Watch are connected to iCloud with the same Apple ID:
    • On your Mac, choose Apple () menu > System Preferences, and then click iCloud.
    • On your iPhone, open the Apple Watch app, then go to general > Apple ID.
  • Your Apple Watch uses a password:
    • On your iPhone, open the Apple Watch app, then type the access code.
  • Transfer procedure is enabled on your iPhone and your Mac:
    • On your iPhone, go to: settings > general > transfer procedure.
    • On your Mac, go to: System preferences > General - down, tick the option "Allow transfer between the Mac and your iCloud devices."
    • If these parameters are already enabled, a user has found that it helped to deactivate and reactivate the procedure of transfer on their iPhone.

  More information:

  Automatically unlock your Mac with your Apple Watch - Apple Support

• ipad ios 9.3.5 with ios iphone 5s 9.3.5 air pair

  How do I pair ipad ios 9.3.5 with ios iphone 5s 9.3.5 air

  An iPhone will pair not via Bluetooth to a computer (Mac or Windows) or personal iPad except hotspot and then only if your cell phone plan he supports. See below for more information. https://discussions.Apple.com/docs/doc-7722

  If you try to use the procedure of transfer/continuity or AirDrop, which does not have Bluetooth but devices don't are NOT matched. Bluetooth must be just on and the devices within range of the other. The following may help in problems of transfer/continuity: https://support.apple.com/en-us/HT204678

• I want to create a contact group, how can I do?

  I can't find anywhere on Mozilla where I create a contact group

  We call them in Thunderbird mailing lists.

  You should have a button of toolbar with an icon of two heads in the address book.

  Or via the menu, file | New | Mailing list.

  No menu? Hold the < alt > key, press V, then T for toolbars and check the boxes.

• Contact groups dimmed

  After the upgrade to El Capitan I am more able to drag individual contacts into contact groups.  When I try to drag the contact to the group all the gray group tour.  The contacts are "ICloud all ' contacts and groups.  I tried to export the contacts from the Contact of Cougar who always works on another machine and import in El Capitan, but no group transferred, only of individual contacts. I noticed in my online account iCloud, that I can still spend individual contacts into groups.

  I just played a little with it and concluded that:

  I could move individual contacts to a group if they were not in there already. In this case, nothing happened.

  Barry

• How do I pair for windows 10 laptop via bluetooth with the iphone 6

  How do I pair 6 + for windows 10 laptop via bluetooth with the iphone?

  You do not have. This isn't a feature of iOS. It has never been.

• iOS 9.2 bluetooth pairing

  Does anyone else's problems do with Bluetooth pairing once upgraded to iOS since iOS 9.1 9.2? As soon as I made my Garmin Forerunner 630 was no longer able to communicate with my iPhone 6 (Note: it worked perfectly, while running iOS 9.1 before nightfall iOS which should be upgraded).

  Measures taken to try to resolve the problem

  1. Forget the camera and rematching. This has compounded the situation - the iPhone could not 'see' the device to try to match.
  2. Pairing my Garmin 630 with a friend (Android based) phone - it works immediately - he can see the Garmin and cannot pair it, no problem.
  3. My Garmin 630 with my iPad Air matching - the iPad is also running iOS 9.2 and he too can not even 'see' the device.
  4. Pairing my iPhone 6 and iPad in the Air with a bluetooth (EU Boom) speaker - it works.
  5. Complete reset of my iPhone 6. Twinning with 630 Garmin still does not work.
  6. Reset complete my Garmin 630. No change.
  7. Following the advice of Apple here: Wi - Fi and Bluetooth: potential sources of interference wireless - Apple Support

  Conclusion

  In summary, it seems that Bluetooth still work on the Garmin 630 and the iPhone and the iPad, but Apple has made some sort of change in 9.2 iOS that prevents matching with certain types of Bluetooth device.

  Similar reported problems

  I've seen a few similar reports on support for other devices forums (not "seen" / "detectable") after the upgrade to iOS 9.2:

  Does not connect via Bluetooth, iOS 9.2 to my home theater of sonny,

  Since iOS 9.2 my Bluetooth PlayStation keyboard no longer works

  iPhone 5 sec bluetooth not working after iOS 9.2

  as well as more general questions of Bluetooth for devices that are already paired:

  No bluetooth after 9.2

  iPhone 5 sec bluetooth not working after iOS 9.2

  iCade/bluetooth controller + iOS 9.2

  None of the posts that i reference above gives no real solution.

  Questions

  1 Apple Please recognize that there is a problem with iOS 9.2 on Bluetooth?

  2 - is anyone else seeing problems similar to what I reported and the posts that I've referenced?

  Problem solved, a bit of a schoolboy error.

  For some reason, the iOS to 9.2 upgrade means that the phone and the Garmin 630 were no longer able to communicate. Try to pair again via the iOS Bluetooth settings screen did not work (the unit has not appeared).

  It seems that matching works only if launched from the Garmin Connect app works on the iPhone / iPad. Once you have coupled the app will Garmin 630, then appear in the Bluetooth settings screen standard iOS, showing as connected.

  In summary:

  (1) not all Bluetooth devices will not necessarily be available for matching in the iOS Bluetooth settings screen (didn't know it until now), and

  (2) previously associated device no longer works after update iOS. Not a huge problem, but a bit annoying.

• 6 s iPhone and IOS 9.2 Bluetooth issues - help

  After updating IOS 9.2 that Siri does more work in my BMW or any other Bluetooth connected device.  There is a band of purple on the top of the phone when it is connected and no sounds are picked up by the microphone the phone or vehicle.  I restarted the phone and disconnected the Bluetooth with no will.  Is anyone having this problem?  It's a matter of adjustment or a bug in 9.2?  I hope it's fixed once it has completely stopped my free hands capacity.

  Jeremy

  I have solved the problem but have no idea how.  I turned off voice search google, tour the siri works and Siri has started working in the car.