iOS 9.2 bluetooth pairing

Does anyone else's problems do with Bluetooth pairing once upgraded to iOS since iOS 9.1 9.2? As soon as I made my Garmin Forerunner 630 was no longer able to communicate with my iPhone 6 (Note: it worked perfectly, while running iOS 9.1 before nightfall iOS which should be upgraded).

Measures taken to try to resolve the problem

  1. Forget the camera and rematching. This has compounded the situation - the iPhone could not 'see' the device to try to match.
  2. Pairing my Garmin 630 with a friend (Android based) phone - it works immediately - he can see the Garmin and cannot pair it, no problem.
  3. My Garmin 630 with my iPad Air matching - the iPad is also running iOS 9.2 and he too can not even 'see' the device.
  4. Pairing my iPhone 6 and iPad in the Air with a bluetooth (EU Boom) speaker - it works.
  5. Complete reset of my iPhone 6. Twinning with 630 Garmin still does not work.
  6. Reset complete my Garmin 630. No change.
  7. Following the advice of Apple here: Wi - Fi and Bluetooth: potential sources of interference wireless - Apple Support

Conclusion

In summary, it seems that Bluetooth still work on the Garmin 630 and the iPhone and the iPad, but Apple has made some sort of change in 9.2 iOS that prevents matching with certain types of Bluetooth device.

Similar reported problems

I've seen a few similar reports on support for other devices forums (not "seen" / "detectable") after the upgrade to iOS 9.2:

Does not connect via Bluetooth, iOS 9.2 to my home theater of sonny,

Since iOS 9.2 my Bluetooth PlayStation keyboard no longer works

iPhone 5 sec bluetooth not working after iOS 9.2

as well as more general questions of Bluetooth for devices that are already paired:

No bluetooth after 9.2

iPhone 5 sec bluetooth not working after iOS 9.2

iCade/bluetooth controller + iOS 9.2

None of the posts that i reference above gives no real solution.

Questions

1 Apple Please recognize that there is a problem with iOS 9.2 on Bluetooth?

2 - is anyone else seeing problems similar to what I reported and the posts that I've referenced?

Problem solved, a bit of a schoolboy error.

For some reason, the iOS to 9.2 upgrade means that the phone and the Garmin 630 were no longer able to communicate. Try to pair again via the iOS Bluetooth settings screen did not work (the unit has not appeared).

It seems that matching works only if launched from the Garmin Connect app works on the iPhone / iPad. Once you have coupled the app will Garmin 630, then appear in the Bluetooth settings screen standard iOS, showing as connected.

In summary:

(1) not all Bluetooth devices will not necessarily be available for matching in the iOS Bluetooth settings screen (didn't know it until now), and

(2) previously associated device no longer works after update iOS. Not a huge problem, but a bit annoying.

Tags: iPhone

Similar Questions

  • pouvez iphone with ios 9 use bluetooth 4.1 5

    pouvez iphone with ios 9 use bluetooth 4.1 5

    Hello ajwaka,

    After reviewing your post, it looks like you want to know if the 5 s iPhone supports Bluetooth 4.1. I recommend you to read this article.

    iPhone 5 s - technical specifications

    Cell phones and wireless

    • Wireless Bluetooth 4.0 technology

    Thank you for using communities of Apple Support.
    Good day.

  • HP ENVY 17-j113tx TouchSmart: Bluetooth paired but NOT connected to the device

    Bluetooth paired but NOT connected to the device - question - Upload of files from device to PC fails.

    Description of the problem

    • Download a file from PC (Win10 x 64) for Android phone has worked well.
    • Download the same file from the phone on PC (Win 10 x 64) - FAILURE.

    Someone knows how to deal with this issue, provide a work around...?

    I have way too much time on my hands right now...!

    Treatment

  • IOS 9.2 Bluetooth disconnects on Apple music

    After the 9.2 ios updated my Bluetooth disconnects when I skip a song of Apple's music software. Is anyone having this problem? And it also happens to look like my ipad 2.

    I have an iPhone 6 and an iPad Mini 2 and use them with JayBirds BlueBuds X and only them tried for you. No disconnect - if jump using the buttons on the Atria or the screen of the device. Also tried a playlist on each that I had downloaded and another list of reading which has been streaming without any problem.

    You don't mention what device are you trying to use?

  • Speaker Bluetooth pairing problem Gen 4 ATV

    I have a 4 Gen AppleTV. Bluetooth pairing seems very delicate/sporadic. I can get it to pair with my Jabra headset move most of the time, but it does not connect with my Harmon Kardon Soundsticks speakers wireless (bluetooth). All my other Apple products connect flawlessly.

    Someone at - it similar problems? Suggestions?

    Thank you

    Jay

    Order items at the end of the use of Bluetooth accessories with your Apple TV (4th generation) - Apple supported

  • Several devices on Stream 8 Bluetooth pairing

    Hello

    I just wanted to know if its possible to pair 2 or several devices such as the mouse Bluetooth and a Bluetooth keyboard on stream 8 and simultameously work on both?

    Kind regards

    Hrishikesh

    Hello

    Keyboard and mouse Bluetooth Bluetooth work wonder, at the same time.

    I have HP Bluetooth keyboard T800 paired with 8 HP flow, just got one case iBall mouse tried bluetooth pairing with 8 Stream and here we go!

    Keyboard and mouse are paired and works like charm.

    More importantly, I have my free to load usb microphone, USB key, etc..

    Almost want to mini computer, mouse and keyboard, extremely portable and easy to carry.

    Kind regards

    Hrishikesh.

  • Android Bluetooth paired with my laptop that Bluetooth was grayed out (NOT the ability to Exchange files)

    Hello

    Connection Bluetooth to an Android mobile with Bluetooth in HP laptop has failed

    I followed these steps to pair the Bluetooth to my HP laptop and the other Bluetooth Android.


    First: I clicked on "Add" device "." Second, the Android mobile Bluetooth showed up. Then I connected to it. After that, "Comparing matching Codes" shown to me. (Screenshot below)

    Next: The user of each Bluetooth accepted us as confirmation. Finally: The pair has been established well. (Screenshot below):

    Although Bluetooth Android was paired with my laptop HP My Bluetooth successfully, the Bluetooth Android is grayed out on my my list of Bluetooth mobile phone as shown in the screenshot below:

    Whenever I clicked on the Android Bluetooth listed in my Bluetooth devices, I don't got no control Bluetooth shows me (NO way to send files from Android Bluetooth appears dimmed) also, whenever the user who has the mobile phone android trying to send file in my laptop Bluetooth paired with its Bluetooth Android, it has encountered an error in sending do not file.

    Although the Android Bluetooth is enabled to be detected by other Bluetooth devices.  If there is a problem with my laptop Bluetooth, then I would be facing the same problem with connecting (pairing) my laptop Bluetooth with Nokia Bluetooth.

    Second: A Nokia mobile with the computer HP Bluetooth Bluetooth laptop was successful:

    I followed the same steps to connect Nokia Bluetooth for my laptop Bluetooth, and he was successful.

    Then windows checked drivers for Nokia Bluetooth.

    Then the control of Bluetooth has been illustrated that will allow to me and the other a user send and receive files via Bluetooth pairing:

    NOTE THE DIFFERENCE BETWEEN a connection NOKIA BLUETOOTH WITH MY BLUETOOTH, AND ANDROID BLUETOOTH WITH MY COMPUTER PORTABLE BLUETOOTH LAPOTP):

    1. There is no verification windows drivers for the moment got sync to my laptop Bluetooth Bluetooth Android. However, there is a windows drivers for Nokia Bluetooth control when it is obtained associated with my laptop Bluetooth.

    2 - THE NOKIA IS NOT CLOTHING OUT(active/enabled), HOWEVER, THE ANDROID IS GRAYED OUT (inactive/disabled)

    I hope you understand the answer for me and me.

    Hello

    I suggest you post your query on the HP forums to get information on the numbers of care for the HP customer for your location because we have no details for him.

    HP Support Forums

    http://h30434.www3.HP.com/

    I hope this helps.

  • BlackBerry Smartphones Bluetooth pairing Helper for "BOLD"

    I'm trying to pair my BB "BOLD" with my Land Rover Freelander 2. When I got a BB curve, I had to download a "bluetooth pairing assistance" where can I find this coupling of assistance based on "BOLD" of bluetooth?

    Hello.

    Here is the address of the page containing the link:

    Click here: pairing Bluetooth app

    Thank you

    Bifocals

  • Treo 700wx bluetooth pairing w / Motorola IHF1000 - help please!

    Recently, I upgraded my Treo 700wx at the exit of the 1.24 firmware for Verizon Wireless. In the process, I lost the bluetooth pairing with my Motorola IHF1000 that was active before the upgrade. I was able to pair the phone with a handsfree Acura and my Lenovo computer system - I have questions only with the IHF1000 Motorola.

    The phone sees the hands of peripheral free Motorola during the match but when I enter the access code (1234), the synchronization fails.

    Someone at - it suggestions?

    You will not be able to reinstall the patch because the unit will return with an error message saying that it is already installed. It is indeed good to do a hard reset after an update anyway. I really hope it solves your problems, and I'm sorry for the inconvenience.

    Message is about: Treo 800w (Sprint)

  • iPhone with iOS 10 SE: Bluetooth problems

    IPad 2 Air with iPhone pairing is not possible. The iPad does not see the iPhone and vice versa.  Both run the most recent update of iOS 10.

    But the two may be combined with a 7 years Lenovo ThinkPad.

    Restarts and other beautiful things were made.

    Why the iPad and iPhone cannot be related by Bluetooth?

    If you try to install a strap > share your Internet connection with Personal Hotspot - Apple Support

  • IOS error 10 Bluetooth headset

    Hello

    Since I've upgraded to iOS 10 on my iPhone 6, my quick mpow Bluetooth headset does not work as Hey used to. When I turn on, they automatically connect to the iPhone and I get the small icon beside the battery meter indicates the State of charge, however, they do not appear as an audio device in spotify, itunes or other audio applications.

    Only the way to solve it is to "forget the device" and re-pair the helmet - pain in the * when to go to the gym, etc.

    I tried to reset the network settings according to another post on the forum, but there is no reaolve the question.

    Any ideas? She must have iOS 10 as they worked perfectly well until last week and I tried it on my iPod touch 4th generation and they work perfectly.

    Thank you

    I have this problem also with a SoundPeats QY8. I think it's a bug of iOS 10 because he was allowed in the iOS 9.

    In order to obtain the device name displayed for audio playback, one solution is to click on the name of the device under Bluetooth settings after it is already connected, which is a useless chore.

  • Problem about the iPhone 6 s MORE and Ford SYNC (Ford Ecosport) bluetooth pairing.

    Hello Apple community!

    I have an iPhone MORE 6s firmware iOS 9.2.1 running and a Ford Ecosport trend M/T (bought last March 2015).

    I always pair my iPhone with audio system in my car (Ford SYNC) every time I jump in my car every day. I drive 4 hours per day and I'm fond of listening to music with my iPhone through the car radio in my car. But while playing music a few days ago my iPhone just disconnected my car bluetooth device. I tried to pair it several times, but it keeps disconnecting. I switched to the USB mode (I always connect my iPhone to my car for the end of charge and also to listen to music when I want to disable my iPhone bluetooth), my iPhone is connected, but all I hear is static, whenever I play music from my iPhone.

    I tried to delete my audio system phone master reset Ford SYNC and bluetooth devices list and also reset my iPhone, but it still shows the same results. I would appreciate anyone's response on what I live now.

    Thank you so much in advance!

    PS: I already upgraded my iPhone iOS firmware to 9.2.1 before that happened.

    Kind regards

    Marc

    Hello, m.asebo.

    It seems that you are having problems with your iPhone 6s more lose connection to the audio system of your car there. You did some great troubleshooting so far. Great job. The following Knowledge Base article offers up a few big steps to troubleshoot your iPhone:

    Get help to connect a secondary Bluetooth device with your iPhone, iPad or iPod touch

    First try these steps

    1. Make sure that your device iOS and Bluetooth Accessory are close together.
    2. Make sure your Bluetooth accessory is on and fully charged or connected to power. If it uses batteries, test them to see if they need to be replaced.
    3. Restart your Bluetooth accessory.
    4. Make sure you have the latest version of iOS on your iPhone, iPad or iPod touch.
    5. On your iOS device, go to settings > Bluetooth and make sure Bluetooth is on. If you cannot turn on Bluetooth or you see a spinning gear, restart your iPad, iPhone or iPod touch.
    6. Pairing the Bluetooth accessory, replace the accessory in detection mode, then pair and connectagain.

    If you still cannot match or connect your Bluetooth accessory

    Check with the manufacturer of Bluetooth to make sure that your accessory works with your iOS device. Contact the Apple Support if you have any of these problems:

    • You can't turn on Bluetooth or the setting is gray.
    • You cannot connect any Bluetooth accessories with your device.
    • The accessory manufacturer has confirmed that your accessory works properly.

    Thank you for reaching out to the communities of Apple Support.

    Kind regards.

  • coupling in ios 9.1 Bluetooth

    My heart rate monitor Polar Bluetooth will pair on my IPAD or IPHONE 6 since the update to IOS 9.1.  It is connected to a Samsung Galaxy with no problems.  It worked fine in IOS 8 but since the update he has not yet seen the device.  It is clearly a problem with Apple's IOS.  Please correct.

    Who exactly do you think that your demanding solve this problem?  This is a technical forum to a user, there is no Apple here.

  • Not HPI Bluetooth pairing

    I just iPhone7. Will pair with one of my Bluetooth devices. Already attached to, iphone 5 s no, problem. Apple support cannot help?

    Even if you just got the iPhone, make sure it is up-to-date.

    Tap Settings > general > software update

    Get help to connect a secondary Bluetooth device with your iPhone, iPad or iPod touch - Apple Support

  • IOS 6s whatsapp Bluetooth problem

    Call for help,

    6 s after having upgraded to IOS 10,

    When it is connected to the Bluetooth headset, the voice message that Whatsapp is broken.

    Disconnect the Bluetooth, stop the same Whatsapp Whatsapp to uninstall and reinstall.

    Impossible to solve the problem.

    Any expert can give me only a hands?

    Thank you all

    LJ

    Tap Settings > Bluetooth, then turn the Bluetooth off then on IT.

Maybe you are looking for

  • stars and counter

    Hello I tried reinstalling my iMac with an own Sierra. To prepare, I saved my itunes on a NAS file. When I restarted itunes I restarted with the database, I have saved but lost my credit rating as well as the number of times, I listened to my songs.

  • Get the Blue error screen: "error of Page in the nonpaged area".

    Original title: Page fault I get a blue screen Page fault in non paged area... just above what it lists win32k. I get this error when you create a new contact in Outlook or by using Firefox.  I can use IE 8 without any problem.  Do not know what is c

  • Configuration of control ACL on SAA plan

    Hello I have set up a plan of LCD to an external interface to restrict access to AnyConnect on ASA 5520, enter the following commands on the device: ! interface GigabitEthernet0/0!  nameif outside!  security-level 0!  IP 1.2.3.4 255.255.255.252 acces

  • Create the Signature buffer in oracle apex 5.0

    Hello, I'm trying to create the signature buffer in oracle apex 5.0, did see some plugins for that as: https://www.enkitec.com/products/plugins/signaturepad/help can I implement the same functionality without using this plugin. What I see: 1) http://

  • Error loading data

    Hi allI am getting error below:ERROR - 1003007 - Data Value [0] Encountered Before All Dimensions Selected, [1] Records Completed. ERROR - 1241101 - Unexpected Essbase error 1003007. Please suggest