iOS 10 connection for broken Mac

Similar Questions

• Connecting to a Mac TC cable ethernet for external storage only

  I scoured these forums looking for a solution to my problem, but nothing I've met has worked so far.

  I have a TC of 2 TB.  I'm sure, it is considered as 2nd generation to 99%.  My Mac is a 21.5 mid-2011 "El Capitan running.

  What I'm trying to do is (should be) pretty simple, but I just cannot get this to work.  I live in the glue, so internet high speed cable is not available and I'm stuck with Verizon DSL via the telephone line.  Go ahead... Take minute for model / to feel sorry for me... I'll wait.  OK, so I have this DSL modem/router from Verizon Wireless and my TC does not seem to play well with it, when I joined the network.  Internet continues in and out and wireless file transfer is so slow.  So I would just remove my TC of the network, disable the wifi signal that he died, and connect to my Mac via the ethernet cable and use it strictly as an external hard drive for my media files.  Any help on how to do this would be appreciated.

  Go ahead... Take minute for model / to feel sorry for me

  I live in important suburb of Melbourne in Australia and count myself "LUCKY" to get DSL to about 6 Mbps, then you are the global average, I guess for internet.

  (Of course we have a Conservative Government... think Republican or Tory... whose the idea of fast internet is something from the years 1990) A conservative, he also seems = backward.

  I have a TC of 2 TB.  I'm 99% sure, it is considered as 2nd generation

  It's really unlikely... they sold a handful.

  Look on the bottom... paper A1409 label is gen4, molded into the first line of rubber... Gen3 is A1355... A1302 is Gen2 and extremely likely.

  So I would just remove my TC of the network, disable the wifi signal that he died, and connect to my Mac via the ethernet cable and use it strictly as an external hard drive for my media files.

  You can do this... * If you? *

  The method is here.

  Time Capsule using wired for Mac for backup only.

  It is a bit tricky because of the gateway and DNS issues.

  If you need more details give me a screenshot of your network on the Mac wireless connection.

  * If you *.

  A self powered 2 TB 2.5 "disk connected to the back of your Mac. will be invisible... it will be faster and much more reliable than the old TC.

  It will allow your local files not network... and therefore the time Machine will work... Time Machine backup impossible of network drives. It can use as the target source ever.

• Can I connect a non-apple for my mac mini screen

  How to connect a non-apple for my mac mini screen?

  1. see #2.

  2. it depends on what type of cable the monitor has and the Mac mini ports; It is not a difference between an Apple and a monitor no Apple for this purpose. A Mini DisplayPort adapter allows to connect an older display until a Thunderbolt port.

  (142062)

• Connect my scanner HP for my MAC Mini

  How can I connect my HP Officejet 5610 all-in-one scanner to my MAC mini? I get a message on my printer that says go to unit Documents. My printer is about five years old. Can I use updates of device for a MAC that is listed in my manual? Thanks in advance for any help on this.

  Hi Cass,

  I would like you to try some more things, like running the scrubber and fixing disk permissions:

  ---

  1) click the Go menu (click on the desktop, then watch the menu in the bar at the top of the page)

  (2) select Applications

  (3) select the Hewlett Packard folder (if it is not there, then you can skip this step all)

  (4) to select the program to uninstall HP

  (5) click on continue

  (6) select the printer.  Press and hold down Ctrl + Options + order at the same time the keys on the keyboard (Apple).

  (7) click on uninstall

  (8) you will get a pop-up window - "Are you sure want to uninstall all the HP software"

  9) click OK to continue

  ---

  After doing the above, go ahead and install the thread linked at the earliest in this pilot.

  I would like to know if it works!

• no connection for Mac

  Anyone had problems installed a connection on a mac with 10.5.6 worm. Computers portable windows work fine. but when I try to install the anyconnect on a mac, I got an error from the installer was not able to launch the vpn client.  It's the version I; m installing anyconnect-macosx-i386 - 2.5.0217 - k9.pkg. Not sure if this is correct, because I'm not much a mac guru. Any help would be appreciated. Thank you

  Hello

  You use the Web-launch feature?

  i.e. to join for ASA using a Web browser, and then try again to install the client?

  You can also try the stand-alone installation using the installation file with the extension "dmg" which can be downloaded EAC. You should be able to install this file directly on the Mac.

  Thank you

  Naman

• Y at - it support for download 2014 Acrobat Pro XI on my new Mac?  Former 2011 broken Mac is not not repairable.

  Need help to download 2014 Acrobat Pro XI on my new Mac.  Former 2011 broken Mac is not not repairable.

  Hi Williams95988165,

  You can download Acrobat XI pro from here: https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html#download_11_10

  Let us know if this helped you!

• Instructions for managing macs w ARD on the internet (no static IP address)

  Please excuse me if it's asked all the time, but I searched and can not find detailed instructions for this.

  I need to manage more than one Mac, on connections to the internet, the devices will not be on the static IP, they will constantly be moving around.

  All the videos I have found online seem to show how to connect and manage Macs on LANs w ARD.

  Details:

  ARD v3.8

  All Mac on El Capitan

  Very appreciated for any help!

  This question is not particularly related to Apple Remote Desktop; for ARD.  This is a configuration of generic firewall and networking question, so good enough instructions for your specific firewall will work here, as long as the firewall can redirect ports - port TCP 5900, in this case - or if your particular firewall has a VPN - Firewall Server average range and high-end frequently - or if you can implement a VPN server behind your firewall and configure the firewall to forward the VPN protocols (different ports) and ports necessary for the particular VPN.

  In general...  I would suggest three ways...   1: set up your firewall to port before port TCP 5900 to the client target.   Maybe TCP 5988.   Or set up a VPN server in your firewall and connect to that and use ARD via a VPN.    If you want to access more than one system on the target network, you will need to either use a range of ports to forward to specific systems behind your firewall and happens to be a problem with many customers - I don't know immediately off-hand if the ARD client allows even to select different target ports - or to set up and move to a VPN.    2: creation and configuration of the VPN server in the firewall allows access to all systems on your network target - a VPN connection makes your local system as it is directly connected to the target network.  3: If you have the VPN server running on a target system and accessible through the firewall port forwarding, this target system must always be available, and all VPN traffic is routed through this system.   It is more complex and can also be a bit difficult to set up.

  If you directly expose ARD ports to the Internet via port forwarding, you'll want to either restrict the available source IP ports (to reduce the magnitude of the attackers), and you'll want to be very careful about passwords on target systems.   Ports of the ARD are detected very fluent, and several people and botnets will attempt to access the system password-baited; trying to guess the users and passwords on the target system.   Once attackers have a login and a password, they will then try to spread throughout the rest of the network.  (It's part of why I prefer to use virtual private networks).

  Sierra of MacOS support PPTP VPN, so I wouldn't go with any configuration of VPN that you considered it.   I'd probably use L2TP/IPsec, because the customer is generally available in most of the other operating systems, Mac OS and iOS.

  There is information available on the network ports used by Apple devices.   If you enable VPN port forwarding, there are discussions on the ports and protocols required to according to VPN you use posted around the ' net and not all firewalls is particularly good to port-forwarding, the protocols and ports VPN. "  Low-end older firewalls and firewalls tend to have problems here.

  To locate on the networks of the target systems, you get to use dynamic DNS from client devices or other means to identify the public IP address that is associated with the target customer.   If customers are roaming on disparate networks and not simply roaming IP addresses on their private networks (these addresses can be fixed through DHCP configurations, too) and if you don't have access to intermediate firewalls, then you will probably have to rethink the entire approach, unfortunately.    Connection to mobile systems distance arbitrary is not especially it is possible, he must do something on the client that "tags" or "ad" its network metadata to your own server from tracking client or server monitoring of some other entity (for example messages to the DNS servers used by the dynamic DNS providers), or the management connection must be initiated from the client.    ARD does not support these mechanisms.   Discussions here can get pretty complex, too--in terms of network configuration, both in terms of security for the clients and servers.

  There are a few related discussions this general topic in the forums. See here, here, here, here or here.

• Interupting for pro Mac wifi network

  Hello

  This problem has just appeared over the weekend after having not made no changes to anything. Whenever my mac pro connects to wifi, all devices have their connection interrupted on the same network. What could cause this interference? When my mac pro to connect internet is very slow compared to how he used the work of tp.

  El captiain 2011 mac pro, asus router.

  Have you fed nd then turn on your router?

  Restarted the Mac Pro?

  You do anything for the Mac Pro or the router since it last worked?

• I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. When it is connected to the MAC, I get the message that itunes must be upgraded. How to synchronize or import/export files(images/music)?  Fact is need to update

  I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. When it is connected to the MAC, I get the message that itunes must be upgraded. How to synchronize or import/export files(images/music)?  Fact is need to update itunes?

  Hi sonalnj,

  I understand that you cannot synchronize your iPhone as iTunes is requested it must be updated. I can help you with that.

  According to the technical specifications for a 6 s iPhone, you need a Mac running OS X v10.8.5 or later version with iTunes 12.3 or later. Because you are on OS X 10.6.8 your version of iTunes is up to date with this OS.

  iPhone 6 s Tech Specs
  http://www.Apple.com/iPhone-6s/specs/

  Now to fix that, you need to update your Mac OS X 10.8.5 Mountain Lion or OS X 10.11 El Capitan. If you want to go to the Mountain Lion, you can do it with the first link below. The cost will be $19.99 and a code will be delivered to you if you can download it via the Mac App Store. Once you have upgraded, be sure to make all software updates to go with him to get the latest version of iTunes.

  OS X Lion mountain
  http://www.Apple.com/shop/product/D6377Z/A/OS-x-mountain-lion

  Now the other option is to move to OS X 10.11 El Capitan, and is a free update that you can do right in the Mac App Store, if you meet the system requirements. Take a look at the following article for more details on how to do it.

  Update of OS X El Capitan
  https://support.Apple.com/en-us/HT201475

  Nice day!

• You can use old iMac as a monitor for mini Mac

  You can use 2008 iMac as a monitor for mini Mac?

  No, because the iMac of 2008 not display entered or supported to do so.

  See > use your iMac as a display with the target - Apple Support Display Mode

  You can use a connection network and something like ScreenRecycler

  See > https://www.screenrecycler.com/ScreenRecycler.html

  However, the best bet is to use a regular external monitor with the Mac Mini.

• Cannot download iOS 9.3 for iPhone 5

  I received notification on my iPhone 5 that there is an update to the iOS - iOS 9.3. My phone has iOS installed 9.2.1. When I try to download the new iOS, he cancels all by checking the download and says that my phone has been disconnected from the internet. My phone is not disconnected from the internet. I have WiFi and data burning and I'M connected to the internet. Is this a bug with the download?

  Also, when I plug my phone into my iMac to install the update, it tells me I have iOS installed 9.2.1, which is the most recent operating system. If iTunes does not know iOS 9.3?

  My iPhone works very well, and I don't have a reason to update. I just thought it would be nice to be running on the latest version of iOS.

  Thanks for your help.

  Paul Trivilino

  Apple released the update iOS 9.3 for some devices (air of iPad and previous iPhone, 5 s and previous) due to problems with activation. You may not be updated until a patch is issued. I recommend to wait for some time (days?) before trying again.

  See this article for more details.

  http://www.IMore.com/Apple-working-iOS-93-fix-older-iPhone-iPad

• After installing IOS 9.3 for Ipad3. I can't activate iPad by Apple ID display error meassage «e-mail cannot be used to unlock the iPad»

  After installing IOS 9.3 for Ipad3. I can't activate iPad by Apple ID display error meassage «e-mail cannot be used to unlock the iPad»

  If you see the lock of Activation screen after update your iOS device, you want to try the following:

  -Restart your iOS device and try to connect again.

  -Visit appleid.apple.com and log in to ensure that your password is correct.  If you change something here, only to change your password.  Try to connect again on the iPhone.

  -Connect on iTunes on a computer and put your Apple ID and password when it prompts you (as it did on your iOS device).

  -ICloud.com check in the settings.  If you see your iOS device listed, remove account (do not erase or hit lost mode). Restart your device and try to reconfigure.

  -These measures should solve most of the problems.  For someone else, you will need to contact Apple (1-800-MY-APPLE or getsupport.apple.com).

  I hope that helps!

• I have House part for my iPhone and apple TV, but the iPhone libraries are not listed under computers on Apple TV.  I don't see libraries for my Mac.  I use the same ID across the three devices apple

  I have House part for my iPhone and apple TV, but the iPhone libraries are not listed under computers on Apple TV.  I don't see libraries for my Mac.  I use the same identifier apple through the three devices. I have an iPhone 6 more working 9.0. The devices are all on the same home network running.

  You can't share a library that is located on an iPhone, iPod or iPad with other devices. You can only share a library that is located on a Mac or a PC with other devices. On other devices, iPhone, iPod and iPad for example, you then activate home sharing to connect to the shared library.

• How to make a custom for a Mac Mini view

  I am doing a custom view for a secondary screen for my mac mini.

  The custom to display what I'm doing on the secondary display is 1366 X 768

  My model number: A1347

  Mac Mini 2.6 / 8 GB/1 TB Fusion

  OS X El Capitan 10.11.3

  I tried to use a SwitchResX to make a custom view

  I also tried the manual control to a custom view, but nothing has worked

  The Mac is less than a week

  How your primary and secondary displays are connected to the Mini?

• Can I connect my old mac desktop computer to the mini to serve as the screen?

  I have an older desktop mac, can I connect to for the mac mini to use for the screen?

  Use the target display mode if possible, or a product such as ScreenRecycler.

  (138944)