iOS 9.3.1 links fixed safari not responding more and links in mail problem

Similar Questions

• After an update, I get error "not responding." and then began to hang at startup; uninstalled and reinstalled still hangs at startup

  After you apply a systematic update on Windows XP, I started having "not responding" to stop and had to cancel the task through the Task Manager. The error "not responding" moved to the selection of items on a screen and had to cancel via the Task Manager. I applied the updates and that did not fix the problem. The last update was 34.0.5 and FireFox would not start up. I noticed several people also had this same problem with Windows 7 (although my Windows 7 works ok - touch wood).

  34.0.5 upward in safe mode but would not come otherwise. I did a Reset and FireFox started with Extensions disabled. The first expansion, I have activated was Norton 2014 Toolbar and FireFox did not come to the top. After application of all available newly INDEPENDENT States fixed, FireFox came upward with the NIS active 2014 and seems to operate normally in the present tense.

  Some added addons toolbar and anti-virus are known to cause
  Firefox issues. Disable all of them.

  Start Firefox in Safe Mode {web link}
  While you are in safe mode;

  Type of topic: preferences #advanced< enter > in the address bar.

  Under Advanced, select General.
  Find and stop using hardware acceleration.

  Search web sites secure. Are there problems?

  Then restart.

• I get messages "Not responding" constants and Thunderbird freezes. I did everything suggested on this forum. Nothing helps.

  I've done all that I can find in this forum - in safe mode, change the settings for McAfee, etc, etc, etc. I downloaded Thunderbird again and reinstalled. Nothing helps. I can look at an email but if I try to remove it I get the message "not responding". If I try to go to the next message I get the message "not responding". If I try to do something, while the screen is frozen, it goes gray and I get the message "not responding". Short of changing my email viewer, is there anyway I can fix it.

  @Jennis, what are posting you here to. Contact McAfee, it is not a question of Thunderbird.

• Lightroom not responding more-Prederences does not

  After a drive problem hard, I had to re install Lightroom CC and the installed version 2015.2.1 is different from the one I already had and never had a problem with.

  Now using Lightroom I often get the program locked up and "does not. I noticed on this version that works using GPU in the preferences

  where as before it would not work. The processor is a Radeon HD 7570. I tried to check a the "use graphics processor ' and all I get is ' Preferences does not.

  Anyone any ideas please

  Hi COP-out,

  Suggests you make sure that the graphics card drivers should be up to date.

  Refer to this link: the help of Adobe Photoshop Lightroom | Graphics processor (GPU) acceleration, troubleshooting & FAQ Lightroom

• problems with internal links Amazon... Safari not responding

  I installed El Capitan... Safari opens fine but when I go to Amazon and go to a link, it goes to this page and it freezes... I have reloaded the OS and still have questions... java script to audit of the United Nations security without success... UN-check 'include suggestions for Safari' in the search... I even deleted the history and deleted the cache... with all this, I always go to Amazon and use the internal link for product and Safari answers... it started with I upgraded to El Capitan... Can someone help me?  Thank you

  Please see the comment of carefulowner , in this discussion.

• Safari not responding

  So I've just updated my macbook for mac is sierra and when I open safari, it gets the leaving of the arc of loading, so I have to force. How can I fix it?

  before I updated to mac os sierra, I was working with google chrome (version mac 10.7). the reason why I stopped using safari, it was for the same reason, he keept crashing. so I started uaing google chrome for browsing the internet

  I have no parts on safari

  I tried to release dates history and Web site, but it gives the Rainbow circle of loading

  I also tried to restart the mac but its still the same

  I use macbook pro end of 2011 current version is 10.12

  Boot mode safe. https://support.Apple.com/kb/PH21875?locale=en_US

  If this does not help, run EtreCheck and post the report here.

  http://etresoft.com/etrecheck

  Download, open the download folder, click on it to open it and select "Open" in the dialog box to execute.

  Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste it when replying.

  Use another browser to download EtreCheck.

• Safari not responding after sleep

  Whenever I open my MacBook Pro after sleep, Safari unresponsive. It won't let me not normal quit, or even force them to leave. It just sits there with the colorful, beach ball until I have turn off, by pressing the power button. I tried clearing history and hide, but to no avail.

  I am running OS X El Capitan worm. 10.11.4

  MacBook Pro (retina, 15 inches, mi 2014)

  2.5 GHz Intel Core i7

  16 GB 1600 MHz DDR3

  Intel Pro Iris 1536 MB

  Thanks in advance for any input.

  1 click  in the menu bar and select "force quit."

  Select Safari and click "exit of strength at the bottom of the window to Force Quit.

  Hold down the SHIFT key and launch Safari.

  2 Disable Extensions and test them.

  Safari > Preferences > Extensions

  Select Disable all extensions and test them.

  Enable the Extensions one by one and test.

  To uninstall any extension, select it and click the "Uninstall" button

  If this does not help, run EtreCheck and post the report here.

  http://etresoft.com/etrecheck

  Download, open the download folder, click on it to open it and select "Open" in the dialog box to execute.

  Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste it when replying.

• Safari not responding when I try to print a page

  How can I fix this safari unresponsive when I try to print a page?

  This isn't an answer. I seem to have the same problem with Word for Mac 2011. I downloaded an update to El Capitan just before all that is going on has begun.

• LINK WINDOWS MAIL PROBLEMS

  When I am in windows mail and e-mail has a link to a Web site and I click on it, it tries to open the site in microsoft word. How can I fix this problem

  Find out if your Internet Explorer has all its faults:

  Start > default programs > set your default programs > click on Internet Explorer. He said "this program has all its defaults"?
  If not, click on 'Choose defaults for this program' > tick on Select All > save

  Now, try the link again. It work this time?

  t-4-2

• Cannot not emails send and receive Live Mail 2011

  I can't send or receive e-mails on my mail2011 windows live

  I use WLM 2011 daily and many of my clients do too.

  This can be caused by a number of things.

  Check the port numbers and the various functions of controls in setting up the account.  Your Internet mail provider should help with that.

  If you have a gmail account, it could be a very specific problem with gmail and WLM.  I can tell you about it.

  Sometimes you get to the point where you remove the setting up the account on WLM, and then re - install the account.  Sometimes the set account can be damaged

  Try to repair.  Go to the uninstall programs feature, select Windows Live Essentials and click on uninstall.  It will offer you the opportunity to fix it.

  Under no circumstances even consider installing the 2012 version.  It is all messed up and you will not be able to get version 2011, which is superior in any case.

• Update of the extension did not start more and why disappeared my (still works) add-ons/extensions in the add-it-manager?

  I use ff4 beta3 on a Win7 PC, this problem appeared in the beta 2 release.

  Some extensions still work very well: Adblock plus, NoScript,.

  Others appear in the menu of the hull, but aimless: video download helper, Ubiquity (a small rectangle behind the arrow in the menu right-click) and no longer work.

  Updated extensions via the button in the gui management either dosen't work.

  This problem is permanent. I don't think that there is a problem with some extension, but I could be wrong. I had installed about 30 extensions, many have been disabled.

  Thank you very much

  Andi

  Beta 4 is already available (24 August): http://www.mozilla.com/en-US/firefox/all-beta.html

  Beta 5 will probably be released next week: https://wiki.mozilla.org/Releases/Firefox_4.0b5

  You can delete the files (extensions.sqlite, extensions.rdf, extensions.cache, extensions.ini) extensions.* and compatibility.ini in the Firefox profile folder to reset the extensions registry. New files will be created if necessary.

  See "extension corrupted files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions

  If you see disabled extensions are not compatible on the next departure in "tools > Modules > Extensions" and then click "Find updates" to do a compatibility check.

• Outlook will not automatically send and receive e-mails. How to send/receive when I open Outlook

  My wife and I have an e-mail account.  I may as well put in place without problem.  I can't get outlook to send/receive emails at the start, and I can't remember my password.  How can I do this and where is it written?

  In Outlook, while watching your Inbox, press Alt + Ctrl + S.  This should open the dialog box send/receive groups.  Check the box ' plan a shipment / auto receive all ' and specify an interval of 10 minutes.  If this option is enabled, Outlook will schedule a send/receive when it starts as well.

  There are several reasons why your credentials can not be recalled, but any suggestion of a solution depends on your version of Outlook, assuming that your version of WIndows is Windows 7, since you posted in a forum for Windows 7.  You should post your question in a forum of Outlook, such as http://social.answers.microsoft.com/Forums/en-US/outlookacct/threads

  Brian Tillman [MVP-Outlook]
  ------------------------------
  If a response may help, please vote it as useful. If a response to the problem, please mark it as an answer.

• U2913WM screen not responding more (nine)

  Bought 2 days ago U2913WM.

  At lunch, I went home set up, everything was nice, off the PC. The evening when I got home, turned on the pc, the monitor has failed. Strange thing was that when the mointor power button was still on, I pressed the power button, it is not a signal sound and off in 5 seconds.

  Tried several things: returned and several times, all connected cables of entry and exit, nothing worked. Then on the dell forums I found the statement "off, unplugging everything, hold the power 10seconds, reconnect"-it worked at the time. The downloaded drivers and Dell Display Manager.

  The day after the same problem, but the previous statement has failed. After some scammers I got the screen working again. Tried what happened when I switch off pc - monitor went to power save (breathless power button), turned on pc, the monitor worked. Then, I tried windows control sleep time setting 1 minute and see what happened. Moniot fell asleep & PSM (pulsed again power button), touched my mouse and I got the picture will once again.

  When I fell asleep, I saw the power pulse button and thought that it was a good sign, when I woke up in the morning, the power button is always rhythm, and I thought that the problem was only temporary. But when I turned on the pc, nothing happened, only the power supply stopped pulsating light and went to 'ON' (just glowing) No. photo or anything. other buttons does not, not even the sound of the beep.

  What I discovered what worked for me: I turn off monitor button / stop, the light turns off, I pull the plug, press the power button to the button beeps sound & other buttons light for a second and then go out, I immediately plug the power in and the screen responds again.

  It seems to me, there is a problem with the screen turn properly cause even not the led backlight turns on when this fault occurs.

  S/N: 09DD4K-CN-74445 - 44G - 245L

  Service number: ADMIN NOTE: maintain the label removed by privacy policy >

  REV: A03

  OS: Windows 8.1 64bits

  GPU: AMD MSI R9 x 270

  I also include a photo, the image of capacative buttons looked a bit off when I opened the package.

  And earlier, I noticed that when I turn on/off, display a little twinkling light, until the image appears.

  

  Then he sat in their warehouse for 5 months. You have two choices...

  (1) return to the vendor for refund or Exchange.
  (2) complete the transfer service from the tag property form. Wait 10 to 15 days for this course ends. Then contact Support technique Dell and ask them to issue an exchange of monitor.

• iOS 10.0.2 links open in safari not apps

  I have an iPhone 6 and just go to ios 10.0.2. Links to connect to applications like youtube and Instagram are open in Safari instead of in their respective applications (as they have since at least ios 8). However, they take the extra step to go through the app as they will open there as usual, but then open in Safari. For example, if I click on a link in the description area of a youtube video of Instagram Instagram opens, but then suddenly pass to Safari, once the load application. In Safari, the upper left corner will tell Instagram, but if I come back, it's just my home feed and not the link, I clicked. The account that I clicked the link is opened in safari, but it's embarrassing because I am not connected to different accounts all the time on safari, so from there I can't like, follow, sharing etc. Is the same for the opposite, if I click on a YouTube video of a profile of Instagram, it opens the youtube app and then stutters and open safari and if I click back to youtube at the top left it goes to my usual youtube of power and if I click on open in safari app the same past (just my flow (, not the video from the link). I can't find any information about this problem except for a beta tester ask the question in July and another person knows the same thing a week there by clicking on the links in whatsapp. This really slows things because it goes through a two-step process to open the application and then the link in Safari, where I'm not logged in. Someone knows how to fix this problem or how to report?

  Hey mel.b,

  Thank you for using communities of Apple Support. Looks like there are some problems with the way Safari meets links in applications requiring wrongly reroute the. We want for your applications and features work as expected and can help to solve this problem with you. You will find a link below with the steps to Reset Safari web data that should help solve this problem.

  Safari web settings on your iPhone, iPad and iPod touch
  

  Clear information on your device

  To clear your history and cookies from Safari iOS 8 or later, tap Settings > Safari > clear the history and data from the Web site. In iOS 7 or an earlier version, tap clear history, clear Cookies and data.

  To erase other information stored in Safari, tap Settings > Safari > advanced > Web site data > delete all data from the Web site.

  Clear your history, cookies and browsing Safari data do not change your AutoFill information.

  To visit the sites without a story, learn how do to Toggle private browsing.

  I hope this helps.

  See you soon.

• VMWare ESXi is not responding

  Hello
  
  I have a server at home with a Q6600 Quad Core and 8 GB RAM running with VMWare ESXi 3.5 for about 8 months now. I have 2 warehouses of data, with 1 TB (SATA HDs), each with 150 GB free and the other with 240 GB free. I have 9 virtual machines running 24 x 7 on it. Everything has been done, until yesterday.
  
  Out of the blues, I stopped to get the answers from the MV in the ESXi. Initially, I was able to connect using the Client Infrastructure but, when if I tried to get information from any virtual computer, I receive a message that the virtual machine could not be reached. Looking at the info from the host, he would show me info network, cpu, memory, but when I tried to reach the data store, it would normally stop responding. I couldn't open the located data store where ESXi is installed once, and all virtual machines were there. Now, I can not connect more, and I don't really know what to do.
  
  What is the best course of action to diagnose the problem? I can access the ESXi screen without problem, but I don't know what to do. I thought to reinstall, maybe with version 4.0, but I'm not sure I should do it. Where (and how) can I access what anyone who could help me figure what's wrong?
  

  TKS

  Try these options in the following order:

  1 reset the Management Agents: http://pubs.vmware.com/vsp40u1_i/wwhelp/wwhimpl/js/html/wwhelp.htm#href=setup/t_restart_mgmt_net.html

  2. restart Management Network: http://pubs.vmware.com/vsp40u1_i/wwhelp/wwhimpl/js/html/wwhelp.htm#href=setup/t_restart_mgmt_net2.html

  3. restore the vSwitch standard: http://pubs.vmware.com/vsp40u1_i/wwhelp/wwhimpl/js/html/wwhelp.htm#href=setup/t_restore_stnd_switch.html

  4. full reset: you loose all the configurations you made on the ESXi server, but the guests are kept.

  http://pubs.VMware.com/vsp40u1_i/wwhelp/wwhimpl/js/html/wwhelp.htm#href=Setup/t_reset_the_configuration_defaults.html

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =