IOS 9.3.5 internet connection

Similar Questions

• failed to check the iOS 9.3 - no internet connection

  I'm updating my iPhone 5S for iOS 9.3 requested to my phone.

  The new software has been downloaded, but this message pops up when I tried to install it. The message says, 'iOS 9.3 failed verification because you are no longer connected to the internet'. This has happened while my phone is on an internet connection stable wifi with me be able to browse safari and have messages coming in and out of my mailbox and messaging applications. In addition, I can even email update iOS 9.3 on page conditions install to my email address (i.e. internet gotta work then).

  I tried several methods as suggested by others in the past is 1) killing the application settings and restart the process again and 2) resetting my network settings. Unfortunately, none of these methods does not work for me and the phone is still coming up with the same error message when I try to install the update.

  It would be appreciated if anyone can shed any light on this please.

  Thanks in advance.

  Connect your iPhone to a power supply and try again.

• Why have I no internet connection, no cell phone, no wi - fi on the iphone after updating ios 9.3.1 5?

  Why have I no internet connection, no cell phone, no wi - fi on the iPhone 5 after update to iOS 9.3.1?

  Settings network is possibly damaged.

  Tap settings > general > reset > reset network settings

  Then see if your iPhone can connect to a Wi - Fi network.

  You will need to enter your Wi - Fi password.

• My iphone5 let me download ios 9.3 do not check say I have no internet connection when I have a full service

  My iphone5 let me download ios 9.3 it does not check say I have no internet connection when I have a full service

  version9.2.1

  Many users have encountered problems to update their devices, their activation or signing into their account after updating iOS 9.3. Apple is aware of the problem and working on a fix.

  Take a look at these articles for additional information on the issue or adapt:

  If you are unable to activate your iPhone, iPad or iPod touch after installing iOS 9.3 - Apple Support

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3If you cannot activate your iPad 2 (GSM model) updated to iOS 9.3

  Apple stop updates iOS 9.3 for older iDevices due to activation server locking problems more

• iOS 9.3 will not install in iPad Air. Error message "no internet connection".

  Cannot install IOS on iPAD 9.3 update.  Error message "not connected to the Internet," when I am connected... How can I clear this download and get a new update? I tried enabling / disabling the wifi works and stop, reboot, close to all applications. Nothing works. My iPAD during the installation process does not recognize the Internet connection. Thanks for any help!

  Apple released the update iOS 9.3 for some devices (air iPad and the front, iPhone 5 s and forward) due to problems with activation. You may not be updated until a patch is issued. I recommend to wait for some time (days?) before trying again.

  See this article for more details.

  http://www.IMore.com/Apple-working-iOS-93-fix-older-iPhone-iPad

• Hello Team Support, I just update iOS to 9.3 and the active stage, then my iPad cannot reach to the apple Server (internet connection is always good in this case). Apple ID

  Hello support team,

  I just updated iOS at 9.3 and the active step then my iPad cannot reach to the apple Server (internet connection is always good in this case). Apple ID & password are still loggin in/out using the iTune software.

  @VietNam country

  See you soon,.

  Thing

  Thing,

  Try again later. Server demand is strong and it's a common problem when a new update has been released.

  

• No Internet connection? iOS 10 question?

  Hello! 3.04 just downloaded on my Mac, placed in the media player, then ejected it according to the instructions. Open the app on my iPad, clicked on "update" and the firmware was loaded without flaw; Unfortunately, after the car has restarted, it sends a signal, but I get a "Internet Connection No." when I try to connect my ipad. I rebooted, I restarted my ipad (a just installed ios 10 yesterday), but to no avail. Any ideas?

  you have configured the media player to use your home network for an Internet connection? If this isn't the case, you will need to do this to get Internet. If you had previously configured to connect to your home network try forgetting the network and reconfiguring the media player to connect to your network home for the Internet.

• Why safari does say "the internet connection appears to be offline" even though I have a good internet connection

  We have a website that queries a particular web service on the web every 5 seconds. On an iPhone 6 running IOS 9.3.5. I have a pretty good internet connection. But sometimes I get the error message saying "the internet connection appears to be offline. Once I update my page, everything seems to work very well. It is originally the site to behave strangely sometimes.

  Hello

  Tap Settings > Safari then slide downwards and press: clear the history and data from the Web site and then restart your iPhone.

  See if that makes a difference.

• Internet connection Cox Cable & Airport Extreme

  I had the last three or four months a problem with Internet cable fall suddenly. All the lights on the modem cable have no problem with the modem. The Airport Extreme base station has a green light, as well. I have to keep resetting the modem cable 3 - 4 times a day. The ISP is Cox Cable.

  It affects all the iPhone, phone Android, iPad and other Apple computer, we have. All lose connectivity at the same time. If I connect to the Mac mini directly to the modem cable by the cable network the internet connection gets dropped without using the WiFi network.

  1 does anyone know conflicts between modems Motorola and Apple Airport Extreme networks?

  2. what else can I check or try to fix it?

  Airport Extreme: How would I test for a problem with the unit master of AE? The only thing I can think to do is reconfigure AE units and using one of the older AE devices as master and see if that makes a difference, but it's a headache to do if there is an easier way.

  Our WiFi network consists of a base station Airport Extreme 802.11ac with two base stations older AE acting as slaves to the base ac station to expand the network throughout the House. All base stations are running the latest firmware from Apple (7.7.3 & 7.6.4 on two more former slaves). The light remained green for disconnects. We have previously disabled IPv6 in Airport utility on the base station to avoid potential conflicts with the Cox' months before the start of this issue of network.

  Cable modem: Motorola MB 7420 - Cox says he could be the modem, so I bought a new modem cable Motorola MB7420 to replace the former Motorola cable modem - always have the same reduced connection problems. The cable modem shows any change in status or lights during connections has dropped, but only reset the cable modem seems to fix the problem. The two modems are not any lights/status change, but there is no internet connection, even if a computer is connected directly to the cable modem once the connection is released. I kept it connected and had it remove the connection to the internet again after resetting the modem (hours between the drops).

  I tried to connect a computer directly to the modem cable with a network cable and had the same problem, so I thought that I had deviated from the Airport Extreme base station as the problem. Now Cox claims that something came out last week, discussing the problems with Apple routers and cable modems or their network. I can't find anything, but they are supposed to send me information later.

  Coaxial connection: Cox is not finding any disconnection or time in their voting for our modem registers. We had three times to check the lines as he first seemed extremely windy Cox and had a problem before with problems connecting to the pole. Who was waived. They tested the connection between the pole and the cable modem, and we get a signal strong; some problems on the survey for our modem logs (every two hours). There is no water in the connections between the pole and the House. We have checked all the connections of the coaxial cable between the outer box and the cable modem. Cox is to revisit all connections around our House to see if they can find no evidence of a problem upstream or downstream from our part.

  Network cables: I replaced network between the cable modem and AE cables as well as AE to a computer next to him - no change.

  1 does anyone know conflicts between modems Motorola and Apple Airport Extreme networks?

  There are at least two known issues with Cox here on Apple's Support communities:

  1. Cox started the IPv6 role. The current workaround is to configure your AirPort base stations to use IPv6: link-local only.
  2. The series of Arris/Motorola SB61XX modem is incompatible with 802.11ac AirPort base stations (potentially, 802.11n models as well.) This is not bad in themselves, they just don't "play well" together. I have not heard of all reports on the series of MB74XX... so maybe it's not the question on this point.

  To test the incompatibility, check the ARP cache. It must contain only around a dozen entries. Considerably more could possibly indicate a problem.

  Run the network utility > Netstat tab > select the option "Display routing table information" > click Netstat

  Note: For OS X El Capitan, network utility can is located in Macintosh HD > system > library > Basic Services > Applications, OR via the Apple Menu > about this Mac... > system report > Tools menu of System Information > window > network utility

  To change the IPv6 configures your airport most convenient base stations you use AirPort Utility, as follows:

  From a Mac:

  • Run the AirPort Utility.
  • Select the base and then station, select change.
  • Select the Internet tab and then, select Internet Options...
  • Change the IPv6 configuration to: link-local only
  • Click on save and then click Update.
  • Allow the base station restart.
  • Do this for each of your base stations.

  Starting from an iOS device:

  • Tap the AirPort Utility to run it.
  • Select the base station.
  • Press Edit.
  • Tap advanced.
  • Tap on IPv6.
  • Change the IPv6 configuration to: link-local only
  • Type actually.

• iCloud disrupts the Internet connection

  I had a lot of power outages Internet randomly and finally isolated the problem to my backups iCloud iOS devices and/or iCloud photo library will be mailed.

  (3 iPhones and iPads 4) devices are connected to a wireless router (currently a Netgear WNDR4300v2) and work perfectly well throughout the day. Only when I plug in a device to load the fact so disrupt the router's Internet connection. As expected, the devices to begin with iCloud download when they are connected to the load.

  I tried 3 different routers and you experience this problem on all of them. As soon as the device (iPhone or iPad) tries to download to iCloud, the Internet stops almost completely. I can ping from a laptop ethernet-cable-connected, but it is extremely slow and cut in half the packages. I can still connect wirelessly to the router and to interact with its administration interface, but the connection Internet is basically dead until I have unplug the iDevice download from the network or unplug it (which disables the backup iCloud).

  An iPhone 6 especially cause the majority of the question because I take a lot of pictures with her (she also monthly extra storage iCloud add-on). Other devices have also caused disturbances, but those who don't last as long. I tried to set many different parameters and frequencies on my routers, but nothing is done even a little.

  Is this the iPhone 6 with lots of photos have also OPTIMIZED enabled?

  It's a lot of traffic from router. If you optimize the phone and iCloud communicate constantly that the phone downloads new photos and iCloud analysis local storage of the phone, sending new files optimized down to the phone based on the amount of space on the phone. It can choke the warmest router.

  Then add the traffic from day to day and other devices...

• Apps to say no internet connection after 9.3

  After the upgrade to 9.3 different applications like hay day and yahoo weather, say I have no internet connection, but the internet is fine. My daughters works very well and does not say that, and we are on the same internet connection. It's never happened before. I was wondering if anyone else knows it after the upgrade or just me? Is there a solution? I know that's not my internet. I'm on an iPad 3

  Tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password.

  Then see if these apps work as it should.

  Sometimes, the network settings on an iOS device can be damaged during a update.

  If this does not help, delete the apps that are no internet connection then re download from the App Store.

• "Connection error. Check the Internet connection. »

  I just installed my printer (an HP CM2320fxi upgrade). Everything works except ePrint/Web Services. The printer is connected directly to my router. It prints network computers. AirPrint works from iOS devices. It can scan to e-mail and documents are properly received by mail outside the network accounts (i.e. it must be connected to and talk to the internet). All the router firmware and the printer has been confirmed to date. all devices have been reset and restarted several times. However, if I try to activate HP Web Services for ePrint installation, I get the following error message: "connection error. Check the Internet connection. »

  After struggling with this issue for many months, including many discussions phone and email exchanges with technical support from HP, they finally sent me a replacement printer.  It works as advertised right out of the box.  I don't know what was the underlying problem, but the fact is that he couldn't be corrected with one of the solutions proposed in the discussions on this forum.  Apparently, there's HP printers out there with a lack of internet connection has nothing to do with a solution that is configurable by the user.  If you have one, then you will need to replace your printer.

  I can't thank HP for that.  They tried my patience and tenacity of the months before offering the only real solution.  They must know their products better than that and should have replaced my printer several months ago.  That being said, the tech person with whom I had most of my relationships, it was a nice guy.  I expect he's working under an edict on exhausting all possible tactics before agreeing to replace the unit.

  Good luck!

• EA4500 - a wireless device of many with internet connectivity problem

  Hello

  I wonder if anyone can comment on a subject that I have with a (a) wireless on my home network devices.  The problem is that a Dell laptop knows slow or no internet connectivity using wireless at all.  Sometimes 1-2 minutes to load one page, other times the message 'not able to display the Web page' dreaded.  That's using Ethernet.  I have another laptop (brand/model exact even) and it has no problem.  I also have a Macbook Pro and other IOS from Apple (iPod/iPad) devices which are very good.  Several connected Ethernet devices are very good as well.  The laptop in question had no problem with my previoius Linksys devices, which are a BEFSR41/WAP55AG and a WRT-54GS v2.  This laptop was the first day or two on the EA4500, but something happened that causes this problem.  I had to add the WAP55AG on my network so my son is happy again, but my plan was to dismantle the other devices.  Suggestions regarding what I can do to fix this are greatly appreciated.

  Thank you.

  EA4500 Firmware v.2.0.37

  Laptop Dell Inspiron 15 w/Intel Centrino Wireless N1030, 1 x 2 bgn (2.4 GHz) + Bluetooth

  Hello

  Thanks for the suggestion.  I tired who, but it did not work.  I then called Dell and they found that the wireless adapter on battery power has been set to maximum power saving.  Changed for maximum Performance and it's been very well.  Fortunately there is nothing wrong with the router.  Thanks again for the suggestion.

• Cannot open app when disable internet connection?

  We are app folio multi use with subscription. (R24)

  Some of our readers have been complaining that they can't launch our application when they turn off the internet connection of the ipad.

  But, on my iPad worked fine online or offline.

  What can I do to help these readers?

  It's a bug introduced with iOS 6.1 that has now been fixed via a patch. You must rebuild your application in the DPS App generator and resubmit the application to Apple for approval.

• No internet connection when hotspotshield connects

  When I connect to the Hotspot Shield VPN elite, my WIFI internet connection stops working.

  I use a Macbook Pro.

  Help, please

  Start here: https://support.hotspotshield.com/hc/en-us