iOS Bug password field

Similar Questions

• By default the password field BEFSR41v3

  Has been changing some settings on the same page as the password change option and settings, also save all that was default in the saved password field.
  I have absolutely no idea what the password is now, and there's only one way to know without the router.

  For those who have, or a similar model, can you please go to the change password page and do a right-click, view source and find the line that says something like:
  input type = "password" name ='password (possibly) "value ='* I NEED TO FIND OUT *'"

  Whatever it is, it has not been set by Firefox. I checked through all my Firefox saved - passwords no reference to 192.168.1.1. Be terribly awesome if you could get this password for me... soon... = /.

  You really A.S.A.P.

  Also, I think that the model of router is correct. Its something like that anyway.

  Thank you very much.

  Same thing happened to me when I enabled UPnP in May. I had no idea that I had to type the password TWICE after making this change. Nasty bug that Linksy never solved. So, I could not come back in the interface, a week or two later. He said that I had the wrong password. I was quite perplexed because I knew I had the right password. I discovered the bad news in the Linksy dslreports forum. Many users Linksy got rid of the BEFSR41 because of this bug, and I have to buy another router Linksy either. All these months I was not able access the interface of the router.

  I tried the password "admin". Did not work. I tried a number of other channels who worked for some to the dslr forum Linksy, but none worked for me. The only solution is a factory reset. I don't want to do this because I have to use the beta firmware because Linksy has so neglected in never update the official firmware for many years. I can't use Ping Plotter Pro on the official firmware because it is too old and Ping Plotter will not work using the TCP and WinPcap engine. Thus, the default factory reset, then I have to Flash the firmware of the beta again means. I had to look too... like I have a new hard drive and all got transferred.

  So, I still don't have the reset as I did have to enter the interface. But that's because as Linksy never corrected that and I had no way of knowing that I had to type the password (twice!) after you have enabled UPnP that I buy Linksy again. I called Linksy support to ensure that the only solution is a factory reset and I was told that the router is no longer supported and Linksy would collect $50 from answering me my question. Gee... Why would I do? I can buy a new router for that! I was not unhappy with this router except how badly he manages DHCP and the fact that Linksy does not solve the problem of password or never gave us a more recent than the official firmware of 2004 and will not be replied to my question unless I have pay $50.

  Try this. He did not work for me but has worked for some. d6nw5vlx2pc7st9m

  http://www.dslreports.com/Forum/remark, 18616506? Hilite =

• Firefox on windows 8.1 is AutoFill password field when autocomplete is disabled.

  Hello.

  Firefox (latest version) for windows is auto-fill a password field, even with AutoComplete is turned off.

  The HTML code for the fields are:

  < input name = seized semiautomatic "member_password1" = "off" type = "password" >
  
  
  < input name = seized semiautomatic "member_password2" = "off" type = "password" >
  
  
  Leave the empty password to automatically generate a password

  In all other browsers, it works very well, and the saved password is not added, but Firefox on Windows 8.1 it is be populated automatically, with the registered user password.

  Thanks - I'll see what I can find. Almost a shame Mozilla simply ignores these fields well.

  Such is life!

• Impossible to update Google password for Mac Mail (no password field)

  I needed to update my gmail password so now Mac Mail is not my gmail.  I have looked everywhere a place for the user name and password in the e-mail accounts or system preferences and can't find it.  the common solution people give is:

  "Click the Mail menu and select the preferences option. Select your account and update your password in the password field. Click on icon close this window, and then click Save. »

  Under the Mail menu > Preferences, select the account, click the sign [---] at the bottom of the list of accounts, and then add the account.

• login password field fill

  I have an end 2013 27 "iMac El Capitan 10.11.2 running. The connection password field filled with erroneous stars sometimes, when I wake it from sleep mode. Sometimes its OK sometimes not.

  Because it was intermittent, I figured though it might have been caused by my cat lying on the keyboard when the Mac is in mode 'sleep' but I moved the keyboard out of the way and it still happens. The only solution I have is to stop and restart the Mac, but it does not work today. The login field filled again until I have stop a second time.

  The other thing that sometimes happens is that each letter is typed a dialog box appears offering what seems to be variants of the letter. for example the letters with accents.

  Try another keyboard.  Intermittent error may be imminent failure of a keyboard, in my experience.

• Mail preference does not show the password field

  What Miss me?   This morning decided to change my Gmail password because of unknown activity.  Able to do through a browser web and then tried to make a password app via Google.  I'm told that I have to go in my mail preferences and change the password to the new password App.  However, no password field doesn't show when I'm in mail preferences.  Now my mail doesn't connect to gmail...

  Michael

  Try to send an email with the account disabled.  A prompt should appear informing that the password is incorrect, and asking you to enter the right pair.  It is a rather messy workaround solution, but it worked for me.  See you soon.

• New user Local via GPO - password field grey Out.

  I use all the 2012 R2 server group policy computer, when I try to reset the local administrator of windows domain controller password, the password field is dimmed. how it highlighted? Help, please...

  There is a political group of preference (GPP) which can do it for you
  Change the password for the local administrator on the domain members became quite easy with the advent of group policy preferences.
      
  Start the Group Policy snap-in, expand Computer Configuration, expand Preferences, click Control Panel, and then click local users and groups. In the menu select new - Local user.  Select Update as the action, type administrator in the user name text box, and then type the new password in the password text box, confirm the password in the text box to confirm the password. Press OK.

• Single user lock screen requires now click here to see the password field; what setting or API controls this?

  At first, this may seem like only an issue with a third-party application, but the question applies to Windows in general. I am a software developer and experienced Windows user, but I can't seem to find no answer on what's going on.

  Normally lock on Windows 7 Professional 64-bit (when you press Windows + L for example) display an icon of great user, the user name, the word "locked" and a password field and a "Change user" button. But after installing the client VPN Junos Pulse , my lock screen changes: it is a tiny user icon and no password field. I have to click the tiny user icon before a password field is displayed:

  

  This situation is not limited to the Junos Pulse. I found the people ask this question after installing programs face connection. Others have had the same problem. And still others have had this problem - more recently. But no one can provide no answer to which change the login screen.

  If I uninstall Junos Pulse login screen returns to normal. But the question is not about Junos Pulse; I want to know what Windows setting or API call causes this situation. What could be the Junos Pulse that would lead even this behavior?

  Yes, I already checked that there is only one user account after the installation of Junos Pulse, and the guest account is disabled.

  Junos Pulse setting changed to change the behavior of my lock screen, and how to make a lock screen normal return that immediately presents the password field without requiring an additional click?

  Hi Garret

  Your message is addressed in the discussions on these forums of Community consumers Microsoft. It is better suited for the MSDN Developer audience. Go to the links below and ask your question in the appropriate forum.

  MSDN forums: Index

  http://social.msdn.Microsoft.com/forums/en-us/categories

  MSDN forums:

  http://social.msdn.Microsoft.com/forums/en-us/home#category=usingforums&filter=AllTypes&sort=lastpostdesc&content=content

  Concerning

• Password field Flash Builder 4.5 No. in the debug configuration.

  Hello

  I was going through the steps to deploy and debug an application on the SIM playbook, and I'm at the point where I have to put a password in flash Builder, but there is no place to put a password. I have the flash builder 4.5 installed. Any ideas why the password field is missing? I tried to make a connection with the SIM anyway and got an error Error: Missing argument - password

  Thanks in advance.

  I had the same problem. The solution for me was quite simple: try to resize the small window a bit bigger and your password field appears

• After Windows Update, the user cannot access password field on the login in Windows 7 screen

  Windows 7 Home 64 bit, our machine is set with two users - two passwords.  As a result of the automatic application of some updates (a number have been applied at the same time we were absent), a user can no more connection time because:

  -the password field is hidden

  -System attempst to check with a blankc password and return an error of incorrect user or password.

  For some reason that I can't (even if logged on as administraor) remove or change the users password.

  It seems that your security database is damaged. Here are some options you can try:

  • Create new accounts. You can do this through steps 1-5 as before, then by typing these commands:
    NET user "On" xxyyzz / add
    net localgroup administrators "On" / add
  • Perform a restore of the system to a point while the problem appeared.
  • Back up your data, and then reload Windows to a freshly formatted drive.

• Selection of the language makes the required password field

  Hello

  I use jDeveloper 12.1.2

  I have a login page with name, password selection and the language of the user (component SelectOneChoice - soc1). I have a value change listener in the field of languages selectonechoice which will set the locale to the newly selected language. I put partial triggers on the name field and the password of the user for soc1. It comes to make the labels the user name and password appear in the selected language. This makes the password field if necessary even if there is value in the field. I also noticed that this occurs only when the language is other than English.

  My lines jsff for the user name, password, and language are-

  "< af:inputText label =" #{loginBean.usernameLabel} "id ="it1"value =" #{loginBean.username} "required ="true ".

  showRequired = "true" autoComplete = "off" partialTriggers = "soc1.

  / >

  "< af:inputText label =" #{loginBean.passwordLabel} "id ="it2"value =" #{loginBean.password} "required ="true ".

  secret = "true" showRequired = "true" autoComplete = "off" partialTriggers = "soc1.

  / >

  < af:selectOneChoice label = 'language '.

  "value =" #{loginBean.Language} "id ="soc1"binding =" #{loginBean.soc1} "autoSubmit = 'true '.

  valueChangeListener = "#{loginBean.localeChangeListener} '"

  >

  < af:selectItem label = 'English' value = "" id = "si1" binding = "#{loginBean.si1}" / >

  < af:selectItem label = 'French' value = 'fr' id = "si2" binding = "#{loginBean.si2}" / >

  < / af:selectOneChoice >

  The value change listener code is-

  Private Sub changeLocale (language: String) {}

  This.setLanguage (Language);

  Locale newLocale = new local (language);

  FacesContext context = FacesContext.getCurrentInstance ();

  context.getViewRoot () .setLocale (newLocale);

  }

  {} public void localeChangeListener (ValueChangeEvent vce)

  changeLocale (vce.getNewValue m:System.NET.SocketAddress.ToString (()))

  }

  I have the tag f: view with the locale defined as local = "#{loginBean.locale}". "

  Whenever I change the language other than English, the password field is back with the error required, even if there is value in the field. He can't if I choose the language than English. can anyone shed light on what I'm doing wrong here.

  Thank you

  UMA

  Hello

  I think you are missing immediate = "true" in the selectOneChoice.

  If this does not work, check this post; ADF and JHeadstart: skip validation on selectOneChoice selection

  Kind regards

  Ruben.

• Oracle apex without password field application login page

  Hi all

  Someone please help with this request. I want to have a login to application page where users just enter their login user id and just click the button connection; Once they connect. I have an authorisation procedure which checks against the database for their user id table and redirects to different pages based on their role as defined in the database. If its a user id invalid; the process redirects to the page that is not permitted.

  Is it possible in the apex oracle to connect to the app with just their user name. We use Oracle APEX 4.0.2 version and oracle 10g r2 database.

  Previously, we had the LDAP authentication, which was no - ssl and we do not want to use it, as this will not be the policy of the company. We have tried to establish a SSL connection and create oracle certificate using s/n, but it always takes some time.

  DECLARE

  v_role VARCHAR2 (30);

  v_page NUMBER;

  BEGIN

  BEGIN

  SELECT user_role

  IN v_role

  FROM table_a

  WHEN USER_ID = UPPER (TRIM (: P101_USERNAME));

  EXCEPTION WHEN NO_DATA_FOUND THEN

  v_role: = NULL;

  END;

  IF v_role = "MANAGER" OR v_role = "ADMINISTRATOR."

  THEN

  v_page: = 1;

  ELSIF v_role = "ANALYST."

  THEN

  v_page: = 32;

  ON THE OTHER

  v_page: = 200;

  END IF;

  APEX_UTIL.set_session_state (p_name = > 'FSP_AFTER_LOGIN_URL', p_value = > NULL);

  wwv_flow_custom_auth_std. Login (P_UNAME = >: P101_USERNAME,)

  P_PASSWORD = >: P101_PASSWORD,.

  P_SESSION_ID = > v ("APP_SESSION").

  P_FLOW_PAGE = >: APP_ID | ':' || v_page);

  END;

  How to change, the process described above to allow the value null for the password field.

  Please help with possible suggestions. Thanks in advance.

  Thank you

  Orton

  Write a custom authentication scheme

  http://allthingsoracle.com/custom-authentication-in-apex/

  and simply return true without checking the password field. The author, Patrick Barel, gives an example:

  FUNCTION authenticate (username_in in VARCHAR2

  password_in IN VARCHAR2)

  RETURN A BOOLEAN VALUE

  IS

  BEGIN

  RETURN TRUE;

  END to authenticate;

  A custom authentication function can do what you want in terms of functionality, as long as it returns true if the authentication is successful or false otherwise.

• Make a field encrypted as a password field

  Hello
  I want to find a text encrypted as a password field in user form field so that the who brought as dowry when a user enter in this field. To do this, I made secret = true to this field. But after doing this the user form find does not work for this text field (search criteria). I think we need to decrypt this field as well to make the functioning of the search functionality. But I am unable to do that.pleases help.

  In addition to the secret = true, try adding noEncrypt = true on this field.

• How to disable the password field in the management of Oracle users

  Hello
  
  How to customize the field password on the user - define the uneditable form? I tried customizing the forms on this field, but it did not work. Can we have an idea if this field can be customized at all
  
  Thank you in advance!

  See if it works for you. I tested and it's ok

  Raises the event - a TIME NEW POINT INSTANCE
  Trigger - USER object. USER_PASSWORD
  The two process - mode

  Action type - property
  Object Type - point
  Target - USER object. USER_PASSWORD
  Name of the property - ACTIVE (APPLICATIONS COVER)
  -False

  Save and open/close both forms. In the modes entry or query, whenever the user access the password field, it is disabled and cannot be changed.

  I hope that it works as expected. Just play :-)

• Impossible to manually update the password field

  Hello

  I am very frustrated with this issue - I hope that someone can help me please.

  For the check of the user, I would like the following flow:

  (1) insert record with just the name and the email address (no password).

  (2) send an email with the link to a password update page by the way of kt_login_id and randomly generated number in the URL.

  (3) page updated password contains the password and password confirm text boxes

  This seems like it should be very simple, but I get strange results.

  My initial insertion sort page creates an entry for the password field in the database, even if there is no field of password on the Insert page and MySQL initial value must be NULL.

  Page updated password is not updated password field.

  I fear that MEASURE did something in the background because these updates relate to the connection table.

  Thank you!

  Steve

  Steve_2010 wrote:

  My initial insertion sort page creates an entry for the password field in the database, even if there is no field of password on the Insert page...

  When you place your page 'register.php' in Code view, is there still the line...

  $userRegistration-> addColumn ("password", "STRING_TYPE", "POST", "password");

  .. in place, and if so, what happens if you...

  (a) delete this line, or

  (b) change to:

  $userRegistration-> addColumn ("password", "STRING_TYPE", "VALUE", "");

  .. which should include at least a value empty (empty) in the password column.

  See you soon,.

  Günter