IOS WEBVPN problem: only the LAN access

Similar Questions

• iOS 10 problems with the Mail application

  Dear Apple and community support,

  Here's my problem:

  I have upgraded to iOS 10 on my iPhone 5s this afternoon (September 13), and now I'm not able to open e-mail - Yahoo!, and Gmail. I can receive emails, I'm not able to view the body of these emails. When I press on them, all I see is a blank white page. I can't answer emails either. I can only their flag or remove them. However, I am able to compose new e-mail messages.

  Here are the steps that I've taken to try to solve my problem:

  1. Restarted my phone
  2. Remove and re-add my Mail accounts
  3. Made a backup and a restore full while that plugged into my laptop with the latest version of iTunes.

  I should be grateful if you would help or more information on this issue.

  Thank you

  Emily

  I also have problems with the Mail application.  On my iphone, ipad, and Mac Pro.  I have several addresses, a MSN, another on Go Daddy and Gmail.  I have various weird problems with threads and every day he re-charge my emails, like if I have never read before.  Something is really problematic with Mail.

  Can the people of APPLE, you help me?

• Some problems with the LAN on Satellite L10 card after BIOS update

  Hello

  I have a problem with my satellite L10. Map does not work after the installation of the new network of edge of Bios (2.80).
  I tried it on Linux, BSD and WinXp. OS see my net card.
  I can even install parameters and ping 127.0.0.1 and my ip.

  But all the other pool spoke to me query time-out.

  Help me please.

  Hello

  What to say I put t think that this could be linked to the BIOS. First of all, as you said that the LAN card is recognized correctly in the device if Manager she s works well!

  However, you could try to access the BIOS and could set the BIOS default settings. Don t forget to save changes to BIOS ;)

  In addition, it would be advisable to reinstall the NIC driver. The Toshiba driver page provides the Realtek LAN driver v5.618.1015.2004.

  Good luck

• Panel display problem (only the part of the .psd file is displayed) program

  Hello

  In my film, I loaded a series of .psd files in my calendar.  (Apparently, Premiere Pro does not support imports from a Canon 5 d RAW file).

  When I play the timeline, the displayed image in the top right program is only a small part of the actual picture that I photographed.

  When I adjust the drop-down list in the Panel of the program at different sizes ('Fit', 50%, 100%) etc this does not solve the problem, it doesn't seem to change the percentage of the program group that is occupied by my image.

  Any thoughts?

  Thank you.

  Matt

  Material that you show in your Preset project are for a project SD DV NTSC 720 x 480 (4:3, BY = 0.9) Standard, so that your still images for this project must be adapted to about 720 x 480. Note: images will be square Pixels (NOMINAL = 1.0), so there is a slight difference.

  Regarding Genuine Fractals (human software), be a little cautious, that PrPro still limited format has capabilities of Import. I have an older version of Genuine Fractals and run these image via PS to the output, via Save_As PSD, the native format of the PS and a format as PrPro can work natively.

  Good luck

  Hunt

• Toshiba NB550-111 - no connection if the LAN cable is more than 2 metres

  Hello

  My newly purchased Toshiba NB550-111(Windows 7 Starter Service Pack 1) has problems with the LAN card.
  If the LAN cable is more than 2 meters, no relation to Allied Telesyn switch (no indicator led on the switch, 2 other desktop computers already connected). I tried not to connect in a different port (one used previously by one of desktop computers), no connection. I tried with 3 cables, still no results.

  Cables (cat5E, so important) have been tested OK before with a cable Tester, and I use both of them without any problem with another 2 desktop computers at home. I set another cable (5 m long, newly purchased) and tested for connectivity. It works very well with the other two offices, no results with the netbook. I tried with adapter it works, I disabled ' energy efficient ethernet "NIC, still no connection properties page. It only connects if the cable is less than 2 meters. I tried to connect the netbook directly to the DSL router, still no connection with a longer cable.

  The device is reported by windows as work very well, and the test Toshiba utility ends there is no problem. Windows I configured in the Control Panel, the Plan balanced for maximum performance in the power options, still no results.
  Any ideas, please?

  Now maybe stupid question but what is with WLAN? You don t want to use WLAN?

• I have only the client connected to the network?

  In many networks corporate single IP is distributed DHCP server on each physical ethernet connection.

  I could run NAT, but on some networks only my WinXP guest is allowed on the network, which means I want Bridged networking but not my host Mac connected to the network.

  In VMware Workstation on Windows, I can do this by removing the Protocol TCP/IP from the network connection on the host just by running Bridged networking.

  If I remove IPv4 settings TCP/IP ethernet adapter MacOSX becomes invalid and is not found by merger.

  I'd appreciate any help or ideas on how to achieve the goal of only to leave the comments on the network using Mac OS x and VMware Fusion.

  Thank you

  If you want to have only the guest access to the physical network Mac OS is on without the Mac itself being able to access it, then you can proceed as follows...

  On the Mac...

  Apple menu > System Preferences > network

  Select the target adapter and configure it to "Use of DHCP with a manual address" and assign IP address 169.254.x.x.

  This will allow the guest operating system to be configured using bridged network and receive an IP address from the DHCP server on the LAN, or you can configure it manually too.

  The guest will be able to connect to the host however will not.

• Problem: Screen resolution & Lan adapt.

  Problem 1: Screen Resolution.
  First of all start, Windows 7 Home Premium 64-bit. Second boot, Windows 7 Home Premium 32-bit. Then I didn't work as it used to be. Now using, Windows 7 Ultimate 32-bit. After this install and reinstall, I was confused and didn't know what was my original using bits. : S (supposed to be 32-bit)

  Okay, so I was trying to backup D: drive and tries to start and do a clean install from disk wins7. But unfortunately, I had my iso installed with Windows7 Home Premium 64 - bit. FYI, I didn't know what Wins7 bit iso has been in the cd, so I just started it and installed with this 64-bit cd.

  Then I tried to change my screen resolution. There were two options: 800 x 600 and 1024 x 768. I changed it to 1024 x 768, but it will not work. It's weird. I went to Device Manager and checked on the Image adapter: Standard VGA graphics adapters.
  Problem 2: The Lan adapter.
  Cable connected to the modem, it flashes. but I could not simply go online, and I didn't know why. Is it lack of the new wins7? Or my adapter lan was broken?
  Don't let some answers, thanks in advance.

  Problem 1: Screen Resolution.

  First of all start, Windows 7 Home Premium 64-bit. Second boot, Windows 7 Home Premium 32-bit. Then I didn't work as it used to be. Now using, Windows 7 Ultimate 32-bit. After this install and reinstall, I was confused and didn't know what was my original using bits. : S (supposed to be 32-bit)

  Okay, so I was trying to backup D: drive and tries to start and do a clean install from disk wins7. But unfortunately, I had my iso installed with Windows7 Home Premium 64 - bit. FYI, I didn't know what Wins7 bit iso has been in the cd, so I just started it and installed with this 64-bit cd.

  Then I tried to change my screen resolution. There were two options: 800 x 600 and 1024 x 768. I changed it to 1024 x 768, but it will not work. It's weird. I went to Device Manager and checked on the Image adapter: Standard VGA graphics adapters.

  Problem 2: The Lan adapter.

  Cable connected to the modem, it flashes. but I could not simply go online, and I didn't know why. Is it lack of the new wins7? Or my adapter lan was broken?

  Don't let some answers, thanks in advance.

  Install the drivers.

• Windows 7 Pro cannot ping ip addresses are see computers on our network (LAN XP only), but can access the internet.

  All computers have fixed IPS and in the same workgroup, all xp pc can ping and see each other. Only the new windows 7 can not. I stopped the norton firewall and windows firewall 7

  Have you disabled one of the firewall and configured it to allow sharing of files on the local network?

• Cisco ASA Anyconnect LAN access problem

  I have very simple network at home with the WAN IP address, ASA uses DHCP and gateway. plain of network of all no complications.

  X.X.X.X like a WAN

  192.168.1.0/24 as a LAN

  IP Pool 192.168.6.0/24 (VPN Pool)

  I am trying to configure AnyConnect (AC) so that I can connect remotely and get my resources on the LAN while out. I am to connect with AC and when you use split tunnel I'm browsing the web very well, but I have no access to the local network (without ICMP or TCP/UDP)

  Route looks good in customer AC

  unsecured network 0.0.0.0/0
  secure network 192.168.1.0/24

  What I'm missing for LAN access?, nat statement, list of access...?

  _____________________________

  Output of the command: "show run".

  : Saved
  :
  ASA Version 9.1 (5)
  !
  hostname asa01
  domain name asa

  names of
  192.168.6.2 mask - 192.168.6.100 local pool Pool VPN IP 255.255.255.0
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  switchport access vlan 5
  !
  interface Vlan1
  nameif inside
  security-level 100
  IP 192.168.1.1 255.255.255.0
  !
  interface Vlan2
  Outside description
  nameif outside
  security-level 0
  IP address XXXX
  !
  interface Vlan5
  nameif dmz
  security-level 50
  IP 192.168.100.1 address 255.255.255.0
  !
  boot system Disk0: / asa915 - k8.bin
  passive FTP mode
  clock timezone PST - 8
  clock summer-time recurring PDT
  DNS lookup field inside
  DNS domain-lookup outside
  DNS domain-lookup dmz
  DNS server-group DefaultDNS
  domain naisus.local
  permit same-security-traffic intra-interface
  network of the NETWORK_OBJ_192.168.1.0_24 object
  subnet 192.168.1.0 255.255.255.0
  network of the NETWORK_OBJ_192.168.6.0_25 object
  subnet 192.168.6.0 255.255.255.128
  object-group Protocol DM_INLINE_PROTOCOL_1
  icmp protocol object
  icmp6 protocol-object
  outside_access_in list extended access permit icmp any any idle state
  outside_access_in extended access list allow icmp6 all all idle state
  outside_access_in_1 list extended access allow DM_INLINE_PROTOCOL_1 of object-group a
  list of access allowed standard LAN 192.168.1.0 255.255.255.0
  pager lines 24
  Enable logging
  asdm of logging of information
  host of logging inside 192.168.1.99
  forest-hostdown operating permits
  Within 1500 MTU
  Outside 1500 MTU
  MTU 1500 dmz
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm - 741.bin
  don't allow no asdm history
  ARP timeout 14400
  no permit-nonconnected arp
  NAT (inside, outside) static source NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.6.0_25 NETWORK_OBJ_192.168.6.0_25 non-proxy-arp-search of route static destination
  !
  NAT source auto after (indoor, outdoor) dynamic one interface
  Access-group outside_access_in_1 in interface outside
  Route outside 0.0.0.0 0.0.0.0 X > X > X >
  Timeout xlate 03:00
  Pat-xlate timeout 0:00:30
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  identity of the user by default-domain LOCAL
  Enable http server
  http 192.168.1.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Crypto ipsec ikev2 ipsec-proposal OF
  encryption protocol esp
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 proposal ipsec 3DES
  Esp 3des encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES
  Esp aes encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES192
  Protocol esp encryption aes-192
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 AES256 ipsec-proposal
  Protocol esp encryption aes-256
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec pmtu aging infinite - the security association
  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  outside_map interface card crypto outside
  Crypto ca trustpoint ASDM_Launcher_Access_TrustPoint_0
  registration auto
  full domain name no
  name of the object CN = asa01, CN = 192.168.1.1
  ASDM_LAUNCHER key pair
  Configure CRL
  trustpool crypto ca policy
  string encryption ca ASDM_Launcher_Access_TrustPoint_0 certificates
  certificate 8b541b55
  308201c 3 c 3082012 a0030201 0202048b 0d06092a 864886f7 0d 010105 541b 5530
  XXXX
  quit smoking
  IKEv2 crypto policy 1
  aes-256 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 10
  aes-192 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 20
  aes encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 30
  3des encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 40
  the Encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  Crypto ikev2 access remote trustpoint ASDM_Launcher_Access_TrustPoint_0
  Telnet 192.168.1.0 255.255.255.0 inside
  Telnet timeout 5
  SSH stricthostkeycheck
  SSH 192.168.1.0 255.255.255.0 inside
  SSH timeout 5
  SSH group dh-Group1-sha1 key exchange
  Console timeout 0

  dhcpd outside auto_config
  !
  dhcpd address 192.168.1.100 - 192.168.1.199 inside
  dhcpd dns 8.8.8.8 75.75.75.75 interface inside
  dhcpd naisus.home area inside interface
  dhcpd allow inside
  !
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  NTP server 50.116.56.17 source outdoors
  NTP server 108.61.73.243 source outdoors
  NTP server 208.75.89.4 prefer external source
  SSL-trust outside ASDM_Launcher_Access_TrustPoint_0 point
  Trust ASDM_Launcher_Access_TrustPoint_0 inside the vpnlb-ip SSL-point
  SSL-trust ASDM_Launcher_Access_TrustPoint_0 inside point
  WebVPN
  allow outside
  AnyConnect image disk0:/anyconnect-win-3.1.07021-k9.pkg 1 regex 'Windows NT'
  AnyConnect image disk0:/anyconnect-macosx-i386-3.1.07021-k9.pkg 2 regex "Intel Mac OS X.
  AnyConnect image disk0:/anyconnect-linux-64-3.1.07021-k9.pkg 3 regex "Linux".
  AnyConnect enable
  tunnel-group-list activate
  attributes of Group Policy DfltGrpPolicy
  VPN - connections 30
  VPN-idle-timeout 5
  internal GroupPolicy_AC_Profile group strategy
  attributes of Group Policy GroupPolicy_AC_Profile
  WINS server no
  4.2.2.2 DNS server value
  client ssl-VPN-tunnel-Protocol
  Split-tunnel-policy tunnelspecified
  Split-tunnel-network-list value LAN
  naisus.local value by default-field
  XX XX encrypted privilege 15 password username
  name of user XX attributes
  WebVPN
  chip-tunnel tunnel-policy tunnelall
  type tunnel-group AC_Profile remote access
  attributes global-tunnel-group AC_Profile
  address pool VPN-pool
  Group Policy - by default-GroupPolicy_AC_Profile
  tunnel-group AC_Profile webvpn-attributes
  enable AC_Profile group-alias
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  !
  global service-policy global_policy
  context of prompt hostname
  no remote anonymous reporting call
  Cryptochecksum:xxx
  : end

  I'm not positive that's causing the problem, but I noticed that you have defined incoherent poolside VPN as a 24 (in the command name and that name is associated with the tunnel group) and 25 (in the command object on the network that is also referenced in the statement of NAT exempting NAT to that object). True your pool assigns addresses from the lower half of the 24, but still...

  I try to simplify things by using a single object for something like that, which is used in several places. With the help of objects the way they are intended, and which allows to avoid any discrepancies.

• To connect to the internal interface and access the LAN

  Hello

  I have the following problem, I have a Cisco 2811 router with a serial number and an ethernet interface. On the serial port, I have an address got from the ISP, but not a real IP address. It's a 30 ip only for communication ECCAS my site and the ISP and the ethernet I one of the addresses of my range. I have have need allow VPN connections on this address (ethernet one) and access hosts on the internal LAN.

  I am able to connect to the VPN, but I can't reach any host inside the LAN

  Is it possible to display relevant configuration

  crypto-address ethernet card must be present in the router.

  What also makes sh crypto isakmp her and sh crypto ipsec his give?

• Another computer can access my personal files across the LAN?

  Some background info: I moved into my dorm to the school a few months ago and I'll use the dormitory internet via lan cable in my room. I'll also put ad hoc internet connection for my phone. Recently, I realized in the "computer > network" I am able to see a list of computers and media devices that is connected to the network "dormitory" via the lan cable. I had problems that these users may be able to see my computer and access my personal files.

  I went to check my 'advanced sharing settings' and these are the following parameters, I had put: ' network discovery: on ', ' files and printers sharing: on "," public folder sharing: on "and finally" Sharing password protected: on»
  Since the discovery of the 'network' is on, my computer can be seen on the network too. I realized my "files and printers sharing" and "public folder sharing" was also lit and I was more worried about my computer being easily accessible by others in the dormitory network. However as my password protected sharing is turned on also, is it still possible for other computers to access my computer and my personal files?
  Thank you for your kind attention

  In the centre network and sharing, make your network a "Public network" rather than a "home network" or "work network".

  This should have the effect to make the following settings in 'advanced sharing settings.

  • Discovery - Off network
  • Files and printers sharing - Off
  • Public folder sharing - Off

  If these parameters only to not configure this way, when you changed in 'Public network', to do so.

• CANNOT ACCESS THE LAN WITH THE EASY VPN CONFIGURATION

  Hello

  I configured easy vpn server in cisco 1905 SRI using ccp. The router is already configured with zone based firewall. With the help of vpn client I can reach only up to the internal interface of the router, but cannot access the LAN from my company. I need to change any configuration of ZBF since it is configured as "deny everything" from outside to inside? If so that all protocols should I match?   Also is there any exemption of NAT for VPN clients? Please help me! Thanks in advance.

  Please see my full configuration:

  Router #sh run
  Building configuration...

  Current configuration: 8150 bytes
  !
  ! Last modification of the configuration at 05:40:32 UTC Wednesday, July 4, 2012 by
  ! NVRAM config updated 06:04 UTC Tuesday, July 3, 2012 by
  ! NVRAM config updated 06:04 UTC Tuesday, July 3, 2012 by
  version 15.1
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  router host name
  !
  boot-start-marker
  boot-end-marker
  !
  !
  Passwords security min-length 6
  no set record in buffered memory
  enable secret 5 xxxxxxxxxxx
  !
  AAA new-model
  !
  !
  AAA authentication login default local
  AAA authentication login ciscocp_vpn_xauth_ml_1 local
  AAA authorization exec default local
  AAA authorization ciscocp_vpn_group_ml_1 LAN
  !
  !
  !
  !
  !
  AAA - the id of the joint session
  !
  !
  No ipv6 cef
  IP source-route
  no ip free-arps
  IP cef
  !
  Xxxxxxxxx name server IP
  IP server name yyyyyyyyy
  !
  Authenticated MultiLink bundle-name Panel
  !

  parameter-map local urlfpolicy TSQ-URL-FILTER type
  offshore alert
  block-page message "Blocked according to policy"
  parameter-card type urlf-glob FACEBOOK
  model facebook.com
  model *. Facebook.com

  parameter-card type urlf-glob YOUTUBE
  mires of youtube.com
  model *. YouTube.com

  parameter-card type urlf-glob CRICKET
  model espncricinfo.com
  model *. espncricinfo.com

  parameter-card type urlf-glob CRICKET1
  webcric.com model
  model *. webcric.com

  parameter-card type urlf-glob YAHOO
  model *. Yahoo.com
  model yapo

  parameter-card type urlf-glob PERMITTEDSITES
  model *.

  parameter-card type urlf-glob HOTMAIL
  model hotmail.com
  model *. Hotmail.com

  Crypto pki token removal timeout default 0
  !
  Crypto pki trustpoint TP-self-signed-2049533683
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 2049533683
  revocation checking no
  rsakeypair TP-self-signed-2049533683
  !
  Crypto pki trustpoint tti
  crl revocation checking
  !
  Crypto pki trustpoint test_trustpoint_config_created_for_sdm
  name of the object [email protected] / * /
  crl revocation checking
  !
  !
  TP-self-signed-4966226213 crypto pki certificate chain
  certificate self-signed 01
  3082022B 30820194 02111101 300 D 0609 2A 864886 F70D0101 05050030 A0030201
  2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43647274 31312F30
  69666963 32303439 35323236 6174652D 3833301E 170 3132 30363232 30363332

  quit smoking
  encryption pki certificate chain tti
  for the crypto pki certificate chain test_trustpoint_config_created_for_sdm
  license udi pid CISCO1905/K9 sn xxxxxx
  licence start-up module c1900 technology-package datak9
  username privilege 15 password 0 xxxxx xxxxxxx
  !
  redundancy
  !
  !
  !
  !
  !
  type of class-card inspect entire tsq-inspection-traffic game
  dns protocol game
  ftp protocol game
  https protocol game
  match icmp Protocol
  match the imap Protocol
  pop3 Protocol game
  netshow Protocol game
  Protocol shell game
  match Protocol realmedia
  match rtsp Protocol
  smtp Protocol game
  sql-net Protocol game
  streamworks Protocol game
  tftp Protocol game
  vdolive Protocol game
  tcp protocol match
  udp Protocol game
  match Protocol l2tp
  class-card type match - all BLOCKEDSITES urlfilter
  Server-domain urlf-glob FACEBOOK game
  Server-domain urlf-glob YOUTUBE game
  CRICKET urlf-glob-domain of the server match
  game server-domain urlf-glob CRICKET1
  game server-domain urlf-glob HOTMAIL
  class-map type urlfilter match - all PERMITTEDSITES
  Server-domain urlf-glob PERMITTEDSITES match
  inspect the class-map match tsq-insp-traffic type
  corresponds to the class-map tsq-inspection-traffic
  type of class-card inspect correspondence tsq-http
  http protocol game
  type of class-card inspect all match tsq-icmp
  match icmp Protocol
  tcp protocol match
  udp Protocol game
  type of class-card inspect correspondence tsq-invalid-src
  game group-access 100
  type of class-card inspect correspondence tsq-icmp-access
  corresponds to the class-map tsq-icmp
  !
  !
  type of policy-card inspect urlfilter TSQBLOCKEDSITES
  class type urlfilter BLOCKEDSITES
  Journal
  reset
  class type urlfilter PERMITTEDSITES
  allow
  Journal
  type of policy-card inspect SELF - AUX-OUT-policy
  class type inspect tsq-icmp-access
  inspect
  class class by default
  Pass
  policy-card type check IN and OUT - POLICIES
  class type inspect tsq-invalid-src
  Drop newspaper
  class type inspect tsq-http
  inspect
  service-policy urlfilter TSQBLOCKEDSITES
  class type inspect tsq-insp-traffic
  inspect
  class class by default
  drop
  policy-card type check OUT IN-POLICY
  class class by default
  drop
  !
  area inside security
  security of the OUTSIDE area
  source of security OUT-OF-IN zone-pair outside the destination inside
  type of service-strategy check OUT IN-POLICY
  zone-pair IN-to-OUT DOMESTIC destination outside source security
  type of service-strategy inspect IN and OUT - POLICIES
  security of the FREE-to-OUT source destination free outdoors pair box
  type of service-strategy inspect SELF - AUX-OUT-policy
  !
  Crypto ctcp port 10000
  !
  crypto ISAKMP policy 1
  BA 3des
  preshared authentication
  Group 2
  !
  crypto ISAKMP policy 2
  Group 2
  !
  ISAKMP crypto client configuration group vpntunnel
  XXXXXXX key
  pool SDM_POOL_1
  include-local-lan
  10 Max-users
  ISAKMP crypto ciscocp-ike-profile-1 profile
  vpntunnel group identity match
  client authentication list ciscocp_vpn_xauth_ml_1
  ISAKMP authorization list ciscocp_vpn_group_ml_1
  client configuration address respond
  virtual-model 1
  !
  !
  Crypto ipsec transform-set TSQ-TRANSFORMATION des-esp esp-md5-hmac
  !
  Profile of crypto ipsec CiscoCP_Profile1
  game of transformation-TRANSFORMATION TSQ
  set of isakmp - profile ciscocp-ike-profile-1
  !
  !
  !
  !
  !
  !
  the Embedded-Service-Engine0/0 interface
  no ip address
  response to IP mask
  IP directed broadcast to the
  Shutdown
  !
  interface GigabitEthernet0/0
  Description LAN INTERFACE-FW-INSIDE
  IP 172.17.0.71 255.255.0.0
  IP nat inside
  IP virtual-reassembly in
  security of the inside members area
  automatic duplex
  automatic speed
  !
  interface GigabitEthernet0/1
  Description WAN-INTERNET-INTERNET-FW-OUTSIDE
  IP address xxxxxx yyyyyyy
  NAT outside IP
  IP virtual-reassembly in
  security of the OUTSIDE member area
  automatic duplex
  automatic speed
  !
  interface Serial0/0/0
  no ip address
  response to IP mask
  IP directed broadcast to the
  Shutdown
  no fair queue
  2000000 clock frequency
  !
  type of interface virtual-Template1 tunnel
  IP unnumbered GigabitEthernet0/0
  ipv4 ipsec tunnel mode
  Tunnel CiscoCP_Profile1 ipsec protection profile
  !
  local IP SDM_POOL_1 172.17.0.11 pool 172.17.0.20
  IP forward-Protocol ND
  !
  no ip address of the http server
  local IP http authentication
  IP http secure server
  !
  IP nat inside source list 1 interface GigabitEthernet0/1 overload
  IP route 0.0.0.0 0.0.0.0 yyyyyyyyy
  IP route 192.168.1.0 255.255.255.0 172.17.0.6
  IP route 192.168.4.0 255.255.255.0 172.17.0.6
  !
  access-list 1 permit 172.17.0.0 0.0.255.255
  access-list 100 permit ip 255.255.255.255 host everything
  access-list 100 permit ip 127.0.0.0 0.255.255.255 everything
  access-list 100 permit ip yyyyyy yyyyyy everything
  !
  !
  !
  !
  !
  !
  !
  !
  control plan
  !
  !
  !
  Line con 0
  line to 0
  line 2
  no activation-character
  No exec
  preferred no transport
  transport of entry all
  output transport lat pad rlogin lapb - your MOP v120 udptn ssh telnet
  StopBits 1
  line vty 0 4
  transport input ssh rlogin
  !
  Scheduler allocate 20000 1000
  end

  A few things to change:

  (1) pool of IP must be a single subnet, it is not the same subnet as your subnet internal.

  (2) your NAT ACL 1 must be changed to ACL extended for you can configure NAT exemption, so if your pool is reconfigured to be 10.10.10.0/24:

  access-list 120 deny ip 172.17.0.0 0.0.255.255 10.10.10.0 0.0.0.255

  access-list 120 allow ip 172.17.0.0 0.0.255.255 everything

  overload of IP nat inside source list 120 interface GigabitEthernet0/1

  No inside source list 1 interface GigabitEthernet0/1 ip nat overload

  (3) OUT POLICY need to include VPN traffic:

  access-list 121 allow ip 10.10.10.0 0.0.0.255 172.17.0.0 0.0.255.255

  type of class-card inspect correspondence vpn-access

  game group-access 121

  policy-card type check OUT IN-POLICY

  vpn-access class

  inspect

• Urgent: need help on problems on the iPhone after updating iOS 10 6s

  Hey there! It's my third post about the problems Ive been face on my devices after 10 updated iOS. Initially, after that I've updated, the music app was not running on my phone-all I could see was an empty screen and the APP crashed and I was redirected to the homepage in a few seconds. Tired to restart the phone, deleting and then adding the app back, nothing worked. Not at all. So I tried to restore my phone, save all content via icloud. Followed all the steps and after the restoration of the aircraft of other problems surfaced, BUT the music app still does not work.

  Now, not only the app does not work, I can no longer sync my iPhone with iTunes. Whenever I try, I get the following errors:

  (1) itunes cannot sync the iPhone connection has been reset

  (2) iTunes sync session could start.

  IF PLEASE NOTE, BEFOR RESTORE IPHONE I COULD ALWAYS SYNCHRONIZE WITH ITUNES EVEN AFTER IOS UPDATE 10 AND TRANSFER THE MUSIC ETC, BUT JUST COULDN'T NOT OPEN MUSIC APP TO PHONE-NOW I CAN'T DO EITHER!

  I have tried pretty much everything, restart both phone & iTunes, reset the network settings on my iphone, reset itunes sync history, by removing the lockdown folder, running iTunes as administrator on my PC, change my USB in corduroy, update iTunes, reinstall iTunes on PC-nothing seems to work AT ALL. And it's extremely frustrating. I can sync music/documents on my iPad after update of the device and the restaurant then (iPad also has major problems) and then play the music on it but just isn't my phone can be synchronized. It is a function important and if I can't synchronize my device is a sitting duck.

  The new update of iOS also gave my massive lag of phone. Screen freezes, apps for time-consuming, HDR photos take longer to be broken. It is just too heavy to wear.

  CCAN anyone help me please with my iTunes sync + music matters app... I really regret updating to the new iOS. Please help me.

  Thank you.

  PS apologies for this long post, I had to write everything I tried.

  If you are on Windows, uninstall iTunes, uninstall Apple Mobile Device Support. Once both are uninstalled, reinstall itunes, see if it syncs with itunes then.

• When it is connected to the LAN, FF cannot find servers; no problem with the wi - fi

  26.0 Firefox running on a Windows 8.1 System. The thing I meet is this: I have no problem loading of pages and surfing when I am connected to my wi - fi network (I have a double function modem that wireless and LAN at the same time). However, whenever I plug the LAN cable, I get the error message that Firefox can't find the server. In this case if I disconnect the wireless at the same time. BUT, if I continually press the button [start] or simply tap the icon reload the page in the address bar, will eventually load, usually after a few failed attempts. However, the page loads usually only partially in a first time, apparently without advanced HTML formatting. But, after clicking on reload again one or two times, the page loads normally. Unknown, is that the behavior is not consistent - some pages of charge very well. But I can't for the life of understand me a boss.

  I've tried troubleshooting by disabling NoScript, but it doesn't seem to make a difference.  It's almost as if the wait time for a response from the server is so minimal when connected to LAN that the server has no chance of loading the first time.  Does that make any sense?  If so, how can I go about fixing the issue?
  

  Thanks for any help you can offer on this (for me, anyway) head-scratcher.

  Maybe another DNS server is used or there is still cached data.

  Have you tried a hard facing to bypass the cache to refresh all files?

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  You can also try to switch to work offline/off voltage after changing the network connection.

  If is also possible that your firewall treats the Wi - fi connection other than the connection to the local network.

• I encountered the problem with the last iOS 9.3.2 update I can't receive call from people, I can call any body, but when l'm calling people any body can ring me just now, I thing the problem where new soft

  I encountered the problem with the last iOS 9.3.2 update I can't receive call from people, but I can call any body, but when l called people any body can ring me only at this time, I think that the problem of the new update. can u check this and answer my question.

  and my phone

  iPhone 6plus

  You see a Crescent Moon at the top of the screen icon? If Yes, disable does not bother to: settings - do not disturb = Off.